Record ID: PUBLIC-9F4C57
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Cast copper alloy D shaped single loop buckle frame of probable Medieval date. The frame is sub-oval in cross section and has a bevelled inner edge. The frame exhibits file marks throughout. The overall condition is very good with an even dark green patina. It measures 16.71 mm in length, width is 22.71 mm and the frame is 2.60mm thick. The object weighs 1.79 grammes. Ross Whitehead 'Buckles 1250-1800' has a similar buckle frame on Page 18, No 40. The buckle frame dates from 1250-1450.
Created on: Tuesday 24th June 2014
Last updated: Monday 9th January 2017
Spatial data recorded. This findspot is known as 'Near Lewes', grid reference and parish protected.

• 

  Image not taken

Record ID: WILT-9D71EC
Object type: FLOOR TILE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete fired ceramic floor tile, dating from the Medieval to the Post-Medieval period. The object is sub-rectangular in plan and rectangular in cross-section. The lower face of the object is sandy and uneven. The upper face is flat and smooth. The object has a mid-orange fabric with occasional small inclusions of red and white grog ranging from 1mm to 4mm and ocassional black iron-rich grains. The fragment has been fired evenly. The thickness of this fragment indicates that it is likely to have been used as a floor tile.
Created on: Tuesday 24th June 2014
Last updated: Wednesday 27th August 2014
Spatial data recorded.

• 

  Image not taken

Record ID: WILT-9BFE5D
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
3 sherds of medieval pottery, divided into two fabrics. 1. Two hand thrown pottery sherds dating to the medieval period (1300 to 1450 AD). The fabric is dark grey/black. The fabric is tempered with abundant grog ranging from
Created on: Tuesday 24th June 2014
Last updated: Wednesday 27th August 2014
Spatial data recorded.

Record ID: BERK-9AC8BA
Object type: BUCKLE
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A complete copper alloy single looped trapezoidal buckle and plate of medieval period. The buckle has elaborate outer frame edges with traces of thick gilding; there is a rounded rest for the pin (retained) and the pin and plate bar is integral. The plate comsists of one sheet of copper alloy, broadly rectangular in plan but with the reverse side significantly narrower than the upper face. There are five large domed rivets on the fron of the frame the would have secured the back plate to the strap. Gilding is retained over the majority of the front of the plate. Similar buckles are il…
Created on: Tuesday 24th June 2014
Last updated: Wednesday 25th June 2014
Spatial data recorded.

Record ID: BERK-9A9BA4
Object type: STRAP END
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete copper alloy plate from a composite strap end of medieval date. The plate would have originally had a matching back plate with a forked spacer between the two plates. The plate is broadly rectangular, narrowing towards the terminal that has a very small projecting knop. There are two rivets located centrally at either end of the plate. Egan & Pritchard (1991:142) illustrate similar strap ends (nos.653 & 664), which are dated from c.1270-1350.
Created on: Tuesday 24th June 2014
Last updated: Wednesday 25th June 2014
Spatial data recorded.

Record ID: BERK-9A52B3
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A complete cast copper alloy horse harness pendant dating to the medieval period. The harness pendant is cast in the form of a sexfoil, a six-armed star or flower with a raised central moulding of a possible three-stemed flower. Traces of red enamel survives in the centre of the pendant. Each arm of the sexfoil has an expanded and rounded terminal and traces of gilding can be seen on bth the front and reverse of the pendant. The reverse is flat and undecorated. The integral and broken suspension loop is set perpendicular to the pendant's body. It is possible that this is the central e…
Created on: Tuesday 24th June 2014
Last updated: Wednesday 25th June 2014
Spatial data recorded.

• 

  Image not taken

Record ID: SF-9A0A71
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy buckle frame of Medieval date. It is as Meols type 7 with sub-rectangular frame that has an expanded oval outer edge and offset and narrowed cylindrical bar. The front face of each side has decoration formed from multiple short incised grooves. Hinging around the bar is a separately cast copper-alloy pin that is rectangular in form, D-shaped in section with a transverse collar or grip and a rounded tip. The entire object measures 19.48mm in width, 16.79mm in length, 4.25mm in thickness and 2.66g in weight. This buckle frame is of Medieval date, c.14th century AD.
Created on: Tuesday 24th June 2014
Last updated: Tuesday 24th June 2014
Spatial data recorded. This findspot is known as 'Milden', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-99CFA3
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A silver Medieval penny of Edward I, Class 1c, c.1279 AD. Withers and Withers, 2006: pp. 20-21.
Created on: Tuesday 24th June 2014
Last updated: Tuesday 24th June 2014
Spatial data recorded. This findspot is known as 'Milden', grid reference and parish protected.

Record ID: SUSS-996237
Object type: COIN
Broad period: MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A Medieval voided long cross penny of Henry III, dating from AD 1248-1250. North Class 3c. Moneyer: Nicole. Mint of London. Cf. North 1994, Vol I, p. 226, no. 988.
Created on: Tuesday 24th June 2014
Last updated: Tuesday 24th June 2014
Spatial data recorded.

Record ID: SUSS-994630
Object type: TOKEN
Broad period: MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A complete Medieval to Post Medieval cast lead alloy uniface token, dating to c. AD 1250-1800; Powell type 7. The token is decorated on one side with a grid design. The other side is undecorated and flat. The token is of a greyish-white colour. It measures 16.06 mm in diameter, 2.32 mm thick, 3.49 g in weight. Tokens were easy to make and distributed widely throughout a large period of time; therefore, they are difficult to date precisely. They are thought to have been circulated throughout both the Medieval and Post Medieval periods and those with simple designs are given a genera…
Created on: Tuesday 24th June 2014
Last updated: Wednesday 25th June 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-99144C
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of the outer frame of a Medieval copper alloy composite harness pendant, probably sexfoil, with part of the side of the vertical slot for the separate swinging pendant, broken across the perforation for the pin or spindle. Part of the upper foil and a flanking foil survive with two triangular-sectioned projecting radiating arms each ending in a circular lobe. A variant on a frequently encountered type, e.g. examples from Norwich (Huddle, J. in Emery 2007, 203-4, fig. 5.93 SF 81 and SF 609). Surviving height 25mm. Surviving width 22mm. 7mm thick. 13th - 14th century.
Created on: Tuesday 24th June 2014
Last updated: Tuesday 24th June 2014
Spatial data recorded.

Record ID: SWYOR-98EFC9
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A lead alloy spindle whorl of Medieval date. It is biconvex with a central perforation measuring 9.7mm in diameter. The faces are worn but do not appear to have been decorated. The whorl has a yellow patina. It is 24.7mm in diameter and 10.7mm thick. It weighs 30.09g.
Created on: Tuesday 24th June 2014
Last updated: Monday 11th March 2019
Spatial data recorded.

Record ID: DENO-98D8EE
Object type: MOUNT
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Incomplete Medieval copper alloy bar shaped fitting or mount. The mount is roughly tongue-shaped with a tapering spike projecting from one end and a broken terminal at the other end - the original overall shapeof these terminals is unclear due to heavy wear of the edges. The mount is D-shaped in section with 2 raised transverse ridges. Towards each end of the bar is a single circular-sectioned rivet. Traces of gilding survive along the upper surface. Although heavily worn this object can be best paralleled to mounts used in horse harness gear (see PAS Record FAKL-D7DB47) but could pl…
Created on: Tuesday 24th June 2014
Last updated: Tuesday 24th June 2014
Spatial data recorded. This findspot is known as 'Winthorpe Area', grid reference and parish protected.

Record ID: YORYM-98BB53
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A silver penny of Edward I dating to the period AD 1292 - 1296. Long cross reverse. Mint of London. Class 7. North Vol 2, p.30, no.1032/3.
Created on: Tuesday 24th June 2014
Last updated: Monday 14th July 2014
Spatial data recorded.

• 

  Image not taken

Record ID: SF-98A9E7
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy mount, probably a suspension mount for a harness pendant or similar, of Medieavl date. It is T-shaped in form with a rectangular cross-bar that is triangular in section. At each end of the crossbar is a trefoil shaped terminal with central circular rivet hole. At the bottom centre of the crossbar extends a short vertical arm that is triangular in section and terminates with a double semi-circular lug set at right angles to the plane of the bar and with circular apertures to hold in place a now missing iron bar. All surfaces of the object are extremely worn, but tra…
Created on: Tuesday 24th June 2014
Last updated: Tuesday 24th June 2014
Spatial data recorded. This findspot is known as 'Monks Eleigh', grid reference and parish protected.

Record ID: SUSS-988902
Object type: TOKEN
Broad period: MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A complete Medieval to Post Medieval cast lead alloy uniface token, dating to c. AD 1250-1800; Powell type 14. The token is decorated on one side with a long cross and one pellet in each quadrant. The other side is undecorated and slightly bent. The token is of a greyish-white colour. It measures 17.12 mm in diameter, 2.16 mm thick, 3.85 g in weight. Tokens were easy to make and distributed widely throughout a large period of time; therefore, they are difficult to date precisely. Those decorated to resemble Medieval long cross pennies continued to be circulated throughout both the …
Created on: Tuesday 24th June 2014
Last updated: Wednesday 25th June 2014
Spatial data recorded.

Record ID: SWYOR-9880AC
Object type: CLOTH SEAL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Two discs from a lead alloy cloth seal, probably an alnage seal dating from the Late Medieval period, 1300 - 1500. One disc shows an open crown above a motif, perhaps a rose or double rose within a beaded circle. Part of a legend, now indecipherable, is visible outside the circle. The other disc appears to be blank. The seal is 25.4mm long, 21.8mm wide and 4.6mm thick. It weighs 7.65gm.
Created on: Tuesday 24th June 2014
Last updated: Sunday 31st January 2021
Spatial data recorded.

• 

  Image not taken

Record ID: SF-984E4D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copepr-alloy buckle frame of Medieval date. It has an oval frame with offset and narrowed cylindrical bar, and thickened outer edge. The outer edge has a raised oval pin rest with three transverse grooves. The entire buckle measures 25.89mm in width, 18.56mm in length, 5.94mm in thickness and 4.84g in weight. This buckle is of Medieval date, c.14th-15th centuries AD.
Created on: Tuesday 24th June 2014
Last updated: Tuesday 24th June 2014
Spatial data recorded. This findspot is known as 'Monks Eleigh', grid reference and parish protected.

Record ID: YORYM-980270
Object type: MACE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete copper alloy mace head of medieval date. The object is comprised of a hollow cylinder, uniform in internal diameter, with three circumferential rows of four pyramidal knops or spike projecting from the exterior surface of the upper portion. The knops in the middle row are four sided while the upper and lower knops are three sided. Two of the uppermost knops have been lost to old damage as has a large section of the lower shaft. The rows of knops are stepped so as to tessellate with one another. The tips of the knops to one side of the mace head are worn which is in keepi…
Created on: Tuesday 24th June 2014
Last updated: Monday 14th July 2014
Spatial data recorded.

Record ID: SWYOR-97F386
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Medieval silver coin: a cut halfpenny of Henry III (1216 - 1272), probably class 6d - 7a (1217 - 1222), London mint, the moneyer Ilger. It is 18.3mm long, 9.1mm wide and 0.7mm thick. It weighs 0.66gm. Reference: North, volume 1, number 977 - 978.
Created on: Tuesday 24th June 2014
Last updated: Sunday 31st January 2021
Spatial data recorded.