Record ID: BERK-0B8ABF
Object type: BROOCH
Broad period: IRON AGE
County: West Berkshire
Workflow stage: Published
An incomplete copper alloy Roman brooch of the Colchester brooch, dating to the period AD 25-60. The spring and pin is missing as is most of the catchplate, and the rounded bow is now bent and distorted. A similar example can be seen in Hattatt (2007:297) no 1455.
Created on: Tuesday 17th June 2014
Last updated: Monday 5th October 2015
Spatial data recorded.

Record ID: WILT-0694BE
Object type: BROOCH
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Published
A late Iron Age or Roman La Tene III type Nauheim derivative brooch dating to the period c.25- 100 AD. The pin is intact and extends at a 45 degree angle away from the integral spring which consists of four coils, one of which loops under the head. The bow extends back from the head and is sub-triangular in shape. At its widest point just below the head it measures 9.88mm, at its narrowest point where it joins the foot it measures 1.46mm. It is decorated with a series of six lines of lozengiform punches which run into one another along the length of the bow towards the foot. The foot …
Created on: Tuesday 17th June 2014
Last updated: Monday 9th February 2015
Spatial data recorded. This findspot is known as 'Near Devizes', grid reference and parish protected.

Record ID: WILT-063F35
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper alloy Iron Age to Roman strip bow brooch dating to the period c. AD 25-75. The brooch is missing the pin and the curl of the catch plate. It measures 54.45mm in length, 21.05mm at its widest point (across the wings), 2.75mm at its narrowest point (tip of the foot) and weighs 6.79 grams. The tubular wing span is 21.05mm and c. 4.6mm in diameter. The pin slot contains the remains of the corroded iron pin, whcih are also visible inside the tubular wings. The bow extends back from the head and is 10.35mm wide, tapering to a width of 2.55mm at the foot. The bow is d…
Created on: Tuesday 17th June 2014
Last updated: Wednesday 22nd October 2014
Spatial data recorded. This findspot is known as 'Stockbridge', grid reference and parish protected.

Record ID: WILT-06052B
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper alloy Iron Age (400-200 BC) La Tène I type brooch which is missing its head, the majority of the spring, the pin, catchplate and the foot. It measures 37.35mm in length, 6.95mm wide (across the bow), 14.85mm deep (bow to catchplate) and weighs 5.78 grams. The majority of the head of the bow and spring are missing, one partial coil remains, the neck expands from now incomplete integral coil and projects outwards at a ninety degree angle to form the thickening bow. The bow is broadly pointed oval in plan and D shaped in cross section. It widens to 6.95mm at the c…
Created on: Tuesday 17th June 2014
Last updated: Wednesday 22nd October 2014
Spatial data recorded. This findspot is known as 'Rockbourne', grid reference and parish protected.

Record ID: WILT-05D2D1
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper alloy Iron Age (400-200 BC) La Tène I type brooch which is missing its head, spring, pin and the foot. It measures 27.05mm in length, 6.9mm wide (across the bow), 15.55mm deep (bow to catchplate) and weighs 5.24 grams. The head of the bow and spring are missing, the neck expands from now missing the integral coil and projects outwards at a ninety degree angle to form the thickening bow. The bow is broadly pointed oval in plan and D shaped in cross section. It widens to 6.9mm at the centre, before narrowing to 3.2mm as the lower bow extends offset. The bow is cu…
Created on: Tuesday 17th June 2014
Last updated: Wednesday 22nd October 2014
Spatial data recorded. This findspot is known as 'Rockbourne', grid reference and parish protected.

Record ID: NLM-058010
Object type: MOUNT
Broad period: IRON AGE
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible mount fragment. Copper alloy sheet with repousse motifs of circles or spirals, bordered at one edge by a pelleted or billeted line. This object could equally be part of a metal clad object such as a helmet. All the edges appear torn or cut, and one end of the fragment is folded back on itself. The form and curvilinear motifs recall the fragmentary plaque from Elmswell, East Yorkshire, which was perhaps a casket mount. Suggested date: Late Iron Age, 100 BC- AD43. Length (as found): 56.6mm, Width: 32.0mm, Thickness (sheet): 0.7mm, Weight: 7.07gms.
Created on: Tuesday 17th June 2014
Last updated: Monday 1st March 2021
Spatial data recorded.

Record ID: WILT-043A26
Object type: BROOCH
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper alloy Iron Age (AD c.10-c.100) La Tène III Nauheim derivative brooch, missing the pin and some of the spring. It has been slightly bent out of shape. Overall it measures 51.95mm in length, 6.95mm in width and 6.85mm in thickness. It weighs 2.93 grams. The brooch has a three or four turn spring (only two turns survive) and a curving bow, which is rectangular in section. It expands from the spring and then tapers in width from 5.8mm to 0.95mm and expands in thickness from 2.2mm to 4.35mm. The front of the bow is decorated with a vertical groove. The brooch ha…
Created on: Tuesday 17th June 2014
Last updated: Friday 5th September 2014
Spatial data recorded. This findspot is known as 'Near Devizes', grid reference and parish protected.

Record ID: YORYM-02DF5E
Object type: MOUNT
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Published
A complete copper alloy mount of probable Roman date. The mount is circular in plan with an openwork triskele design, though with four tendrils rather than the usual three. Four straight arms project, each joining slightly off centre to create a central near-square perforation, and continuing to the outer frame. Four knob-ended tendrils curve around the interior of each resulting sub-triangular cell and are joined to the outer frame by integral sprus. The knobs appear to be separately cast and fitted into circular recesses at the end of each tendril. Examination of the reverse shows t…
Created on: Tuesday 17th June 2014
Last updated: Friday 17th November 2017
Spatial data recorded.

Record ID: NLM-027F9B
Object type: COIN
Broad period: IRON AGE
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. South Ferriby base metal core for plated state of the Corieltauvir, probably ABC no. 1743, Van Arsdell no. 811-2, Haselgrove period 2 phase 6, issue of 50-20 BC. Obverse description: Apollo wreath, probably with stick and uncertain complement of crescents. Reverse description: Severely disjointed Celticised horse left, two pellets on sticks below horse, possibly anchor shape above horse. Diameter: 18.3mm, Weight: 3.06gms, die axis: possibly 6.
Created on: Tuesday 17th June 2014
Last updated: Monday 1st March 2021
Spatial data recorded.

Record ID: SUR-026D1F
Object type: COIN
Broad period: IRON AGE
County: Bracknell Forest
Workflow stage: Awaiting validation
An incomplete Iron Age silver unit of Tincomarus, Charging Bull Type, 25BC to AD10. The damage appears to be ancient. ABC 1112, BMC 906-910.
Created on: Tuesday 17th June 2014
Last updated: Tuesday 17th June 2014
Spatial data recorded.

Record ID: NARC-01DE25
Object type: COIN
Broad period: IRON AGE
County: Northamptonshire
Workflow stage: Awaiting validation
A copper alloy unit. Very worn.'Corded hair' type. Uncertain Northern region, uninscribed. (20 BC - 10 AD). Obverse: head left, corded hair Reverse: horse left, pellet (in ring?) below.. Reference: Hobbs, cf. 2453-60. ABC, cf. 2544.
Created on: Tuesday 17th June 2014
Last updated: Monday 7th July 2014
Spatial data recorded.