Back to simple search | Back to advanced search

    You searched for:

    • Created: Friday 25th April 2014
    • Show this many records per page: 20
    • Object type: STRAP FITTING

  • Thumbnail image of GLO-A7D946

Record ID: GLO-A7D946
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy bar mount with a large central low-domed oval plate that is decorated with five recessed, transverse lines at the waist. Two small sub-oval arms project from the top and bottom and are pierced to accommodate a copper alloy rivet (one rivet is still in place). There is an off centre hole in the middle of the oval plate. The rear of the oval is dished.
Created on: Friday 25th April 2014
Last updated: Friday 25th April 2014
Spatial data recorded. This findspot is known as 'North Gloucestershire', grid reference and parish protected.


  • Image not taken

Record ID: NMS-A7AFB6
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy bar-mount with terminal and central lobes. Both the former are pierced by holes countersunk on the rear and containing a rivet. The latter, which is larger and hollow-backed, is decorated with a small and rather roughly made central hole, six longitudinal filed grooves and many shallow transverse grooves. 8.7 x 19.8mm. 14th century.
Created on: Friday 25th April 2014
Last updated: Friday 25th April 2014
Spatial data recorded.


  • Thumbnail image of HAMP-A4F6E7

Record ID: HAMP-A4F6E7
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Early Post-Medieval (1500-1700) copper alloy sword belt fitting, consisting of a hooked plate looped into a suspension loop with a fragment of adjoining mount. This fragment of mount would have had three suspension loops from which a trio of such hooked plates would have hung. In turn, the scabbard straps would have been attached to these plates. The hooked plate is roughly triangular in form, with the remains (worn break) of a pierced knop (for the iron rivet) at one end while the globular-terminalled hook, which curves back on itself to meet the decorated face of the…
Created on: Friday 25th April 2014
Last updated: Friday 25th April 2014
Spatial data recorded.


  • Thumbnail image of WAW-A49F21

Record ID: WAW-A49F21
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval (late 16th to 17th centuries) strap fitting; a decorative mount. In plan, the copper alloy mount is an oval with a large knop at either end. The upper face has a moulded design forming scrolls and foliage. The reverse is undecorated and has two integral spikes which are circular in section, taper to a point and both a bent over slightly. The surface of the mount has a abraded matte green/grey patina. It measures 24.77mm long, 11.72mm wide and 9.03mm thick, weighing 2.2g. Strap fittings have been in use from the late Medieval to Post Medieval period. Egan (2005, 39) co…
Created on: Friday 25th April 2014
Last updated: Thursday 13th October 2016
Spatial data recorded.


  • Thumbnail image of WMID-A31E74

Record ID: WMID-A31E74
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
A complete silver strap slide of probable Post Medieval dating (AD 1500 to AD 1700). The strap slide is rectangular in shape, with a D shaped cross section. The corners of the outer edges are bevelled. The inside edge is flat with filemarks present. No traces of decoration are present on either side. No signs of attachments or internal prongs are present. It measures 33.2 mm in length, 19.4 mm wide and 5.5 mm thick. The frame is 3.7 mm thick. It weighs 10.0 g. The strap slide is a light grey colour, with an even surface patina. Similar style strap slides, often made from c…
Created on: Friday 25th April 2014
Last updated: Friday 2nd September 2016
Spatial data recorded.


  • Thumbnail image of SF-A23C40

Record ID: SF-A23C40
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy swivel strap fitting of Medieval date. Only one loop survives, the remainder is missing due to old breaks, now worn. The loop is D-shaped in form and section, tapering at both sides in stylised zoomorphic terminals. These are in the form of animal heads with crescent shaped ears, prominent and projecting triangular brows with transverse grooves, and elongated snouts. The snouts grasp the attachment end, which is oval in form with a circular aperture that would have originally enabled the loop to swivel. This strap fitting measures 21.33mm in lengt…
Created on: Friday 25th April 2014
Last updated: Thursday 30th November 2017
Spatial data recorded. This findspot is known as 'Barking', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 6
Search server index: asgard

You are viewing records: 1 - 6.

Search statistics

  • Total quantity: 6
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

1 - 6 of 6 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.