Back to simple search | Back to advanced search
You searched for:
Record ID: SWYOR-2702D7
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy finger ring, probably of Post-Medieval date, about AD 1500 - 1800. It is a simple, broad hoop of thin rectangular section, without bezel. It is decorated with a stamped pattern of opposing equilateral triangles; each triangle containing a stylised fleur-de-lis. It has been made by bending a strip of metal and soldering the ends to form a ring. The butted join is clearly visible and the decoration is not aligned. The ring has a rough, light green patina and has been partially bent out of shape. It is 17.6mm long and 16.2mm wide and the loop is 5.3mm wide and 0.6mm thick.…
Created on: Monday 7th April 2014
Last updated: Sunday 26th May 2019
Spatial data recorded.
Record ID: SWYOR-2B6CD2
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A cast, copper alloy strap fitting from a sword belt dating from the post-Medieval period, AD 1500-1700. It is the hooked plate from a sword belt. It is sub-rectangular in shape, tapering slightly towards the ornate hooked end where it is decorated on each side with a shallow, v-shaped notch followed by a semi-circular cut-out, terminating is a fleur de lis, the central feather of which is broken off, but which would have extended into a wide hook. The broader end is biconcave. A broad, central groove runs down the full length of the upper side of the artefact. There are two rivet hol…
Created on: Monday 7th April 2014
Last updated: Tuesday 5th November 2019
Spatial data recorded.
Record ID: SOM-2C0625
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
Post Medieval copper alloy double-looped oval buckle with an iron pin and separate strap-plate. The loops form one continuous oval outer frame and the outer sides of the loops are slightly widened. The outer edge is rounded and the inner edge and back flat and plain. The integral strap bar is plain. The iron pin is highly corroded but remains in situ. The strap plate is formed of a thin rectangular strip of copper alloy sheet bent in half around the central bar. It has a rectangular slot at the fold for the pin and both sides are borken with irregular breaks. It is 19mm long, 21.1mm i…
Created on: Monday 7th April 2014
Last updated: Monday 2nd June 2014
Spatial data recorded.
This findspot is known as 'Cullompton', grid reference and parish protected.
Record ID: SOM-2AC422
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
A post-medieval copper-alloy mount with single integral rivet. The mount is pointed oval in shape. The front is slightly convex and has moulded beading along the edge. At the centre of the mount is one larger pellet, with incised lines emerging from it in saltire. The single attachment spike emerges centrally from the back. It is square in cross-section and has an old break at the tip. The mount is 23.4mm long by 14.2mm wide, 1.7mm thick excluding the rivet, 8.5mm including. It weighs 2.22 grams. The mount has corroded to a red-brown colour with some areas of light-green corrosion pro…
Created on: Monday 7th April 2014
Last updated: Monday 2nd June 2014
Spatial data recorded.
This findspot is known as 'Cullompton CP', grid reference and parish protected.
Record ID: SOM-2C10A4
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
Rim fragment from a late Medieval or Post Medieval cast copper alloy vessel. The thick everted rim is dished with a concave upper side and convex curved lower face. The broad flat top edge is thickened by a triangular sectioned swelling on the inner face. The lower point is just starting to bend back out before the break at the constricted neck where the rim met the body of the vessel. The internal surface is smoother than the outer which has smoothing lines from the clay mould. Both sides are extensively sooted and the breaks are old. The fragment is 48.8mm long, 46.9mm wide, 9.3mm …
Created on: Monday 7th April 2014
Last updated: Monday 7th April 2014
Spatial data recorded.
This findspot is known as 'Otterton CP', grid reference and parish protected.
Record ID: SOM-29F4A2
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
A fragment comprising a single support from a cast copper alloy chafing dish of 15th-16th century date and a small part of the dish rim. The support is rectangular in plan with straight sides. In profile it is angled up and out from the rim at 45 degrees with an angled lower side, vertical outer side and an upper side which is angled at first then becomes concave towards the outer edge. At the inner end of the support is a small part of the dish rim which appears to be vertical with a thin raised line running around the inner side. It is 31.8mm long, 20.8mm wide, 11.9mm thick at the o…
Created on: Monday 7th April 2014
Last updated: Monday 2nd June 2014
Spatial data recorded.
This findspot is known as 'Cullompton', grid reference and parish protected.
Image not taken
Record ID: SF-2C8AE3
Object type: STUD
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy stud or mount of Post-Medieval date. It has a domed head that is stamped or punched to give it a sexfoil appearance with deep separating each lobe or 'petal'. On the underside of the head two neighbouring lobes have initials, presumably maker's marks, comprising the letters J and M. At the centre of the back face is an integral rivet or shaft that is square in section and tapers to a sharp point, now folded flat against the back face of the head. The stud measures 16.61mm in diameter, 5.97mm in height (flattened), and weighs 2.20g.
Near identical mounts or studs hav…
Created on: Monday 7th April 2014
Last updated: Monday 7th April 2014
Spatial data recorded.
This findspot is known as 'Framlingham', grid reference and parish protected.
Image not taken
Record ID: SF-2C9376
Object type: STUD
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy stud or mount of Post-Medieval date. It has a domed head that is stamped or punched to give it a sexfoil appearance with deep separating each lobe or 'petal'. On the underside of the head two neighbouring lobes have initials, presumably maker's marks, comprising the letters J and M. At the centre of the back face is an integral rivet or shaft that is square in section and tapers to a sharp point, now folded flat against the back face of the head. The stud measures 16.12mm in diameter, 4.63mm in height (flattened), and weighs 2.34g.
Near identical mounts or studs have…
Created on: Monday 7th April 2014
Last updated: Monday 7th April 2014
Spatial data recorded.
This findspot is known as 'Framlingham', grid reference and parish protected.
Image not taken
Record ID: SF-2CAE62
Object type: STUD
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy stud or mount of Post-Medieval date. It has a shield shaped plate, missing its base due to old breaks, with projecting lis-shaped terminal at the centr of its upper edge. Traces of moulded floral or foliate motifs and gilding are visible on the front face, their preise form uncertain due to post-depositional wear. On the back face of the plate are two incomplete integral cylindrical lugs or rivets, missing their tips due to old breaks. It measures 28.51mm in length, 16.26mm in width, 1.78mm in thickness, and 3.33g in weight. This is a decorative belt or strap mount of P…
Created on: Monday 7th April 2014
Last updated: Monday 7th April 2014
Spatial data recorded.
This findspot is known as 'Wetheringsett', grid reference and parish protected.
Record ID: SF-2D1E67
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete cast copper-alloy hooked tag of Post-Medieval date. It has a circular plate, missing its suspension loop at the top of the plate due to old breaks. The front face has moulded decoration comprising a central cross surrounded by two concentric bands of rectangular or square shaped motifs. On the back face of the plate is an integrally cast cylinder that would have originally held in place the separately cast, and now missing, hook. The entire object is very worn and measures 12.23mm in length, 14.31mm in width, 4.66mm in thickness and 1.27g in weight.
This is an incompl…
Created on: Monday 7th April 2014
Last updated: Monday 19th January 2015
Spatial data recorded.
This findspot is known as 'Wetheringsett', grid reference and parish protected.
Record ID: NMS-2974F8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy double oval buckle frame with missing pin and narrowed triangular-section strap bar. The outside edge of each loop is scalloped forming seven foils defined by deep transverse grooves, with slightly shallower transverse grooves between. There is a very slight trace of possible gilding on the upper surface. The reverse face of the buckle is plain and flat and the frame is now slightly angled. Whitehead dates buckles of this type to circa 1450-1600 AD.
Created on: Monday 7th April 2014
Last updated: Wednesday 28th May 2014
Spatial data recorded.
Image not taken
Record ID: NMS-2ABEC5
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy jetton of Hans Schultes III, rose-orb type of Nuremberg, Mitchiner 1409, 1608-12
Created on: Monday 7th April 2014
Last updated: Monday 7th April 2014
Spatial data recorded.
Record ID: NLM-29B268
Object type: SCOOP
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy scoop from a seed drill. Cast hemispherical spoon on the narrower end of a slightly tapered round-section stem. The stem is stepped towards the other end, for insertion into a rotating drum. This class of object is frequently reported, and variously misidentified, often as an apothecary spoon or cosmetic implement. Suggested date: Post-Medieval, 1800-1900.
Length: 50.3mm, Diameter (bowl): 8.1mm, Thickness (stem): 6.9mm, Weight: 9.07g.
Created on: Monday 7th April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded.
This findspot is known as 'Binbrook', grid reference and parish protected.
Record ID: NLM-2A1626
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. Concavo-convex naturalistically modelled paw of a lion, with a circular lug with drilled hole of diameter 3mm for attachment to a small bowl, serving as one of its feet. The light construction of the piece, with detail retained as a negative impression on the hollow back, suggests this may be from a decorative item of tableware in Neo-Classical style. Suggested date: Post-Medieval, 1750-1850.
Length: 22.2mm, Width: 15.9mm, Thickness: 1.5mm, Weight: 3.13gms
Created on: Monday 7th April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded.
This findspot is known as 'Kelstern', grid reference and parish protected.
Record ID: NLM-2BC102
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy and glass fob seal matrix. Oval panel of transparent smoky yellow glass within a pressed metal gilded frame. The glass is engraved with the facing bust of a balding clean shaven man with sideburns wearing a cravatte or similar neckwear with a high collared garment; possibly with a buttoned shirt below. A six character legend in Roman capitals identifies this as BRIGHT, probably referring to Radical campaigner John Bright (1811-1889). This is the second signet bearing Bright's named image from the area - NLM-9D36A6 being the first. Richard Cobden and John Bright were promi…
Created on: Monday 7th April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded.
This findspot is known as 'Binbrook', grid reference and parish protected.
Record ID: NLM-2C0DB8
Object type: SPUR
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy spur fragment. Cast figure of eight terminal to a small D section spur side. A pair of loops of length 23mm for the attachment of spur leathers are retained in the terminal; each comprises a rhomboid plate with traces of a rivet of diameter 2.7mm, a projecting pair of stops, and the looped part, which is closed by being bent back on itself. Suggested date: Post-Medieval, 1600-1700.
Length: 43.4mm, Width: 13.1mm, Thickness: 3.6mm, Weight: 6.56gms.
Created on: Monday 7th April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded.
This findspot is known as 'Swinhope', grid reference and parish protected.
Record ID: NARC-2B5612
Object type: CHAPE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A cylindrical chape made up of stamped copper alloy sheet, dating to the 15th-17th century. The base is a circular disc fitted into the base, 7mm in diameter. The upper edge has V-shaps cut out of it as decoration and is mis-shaped due to post depositional damage. The longitudinal seam is no longer held together by sodler. The decoration is floral with a central row of raised pellets flanked by solid lines, and a similar sequence of pellets and solid lines at the top edge, leaving a blank area of 13mm before the edge.
One of similar style has been recorded on this database at NARC-…
Created on: Monday 7th April 2014
Last updated: Tuesday 8th April 2014
Spatial data recorded.
This findspot is known as 'Tiffield', grid reference and parish protected.
Record ID: LON-2C0086
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A post medieval copper alloy thimble dating to the 16th century. The thimble has straight sides with a separate dome at the peak. There are undecorated bands at the base and at just before the dome with a pattern of circular shaped pits spiralling from the lower band to the upper band. The circular pits also cover the dome. There is no evidence of a maker's mark and there is some dark grey discolouration across sections of the thimble.
No exact parallels can be found for this object. However, there are several thimbles on the PAS database that do not have domes and are too tall to…
Created on: Monday 7th April 2014
Last updated: Wednesday 20th August 2014
Spatial data recorded.
Record ID: LON-2A13B3
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
An incomplete post medieval cooper alloy book-clasp dating AD 1550-1800. The object is formed of two plates of sheet copper alloy. The front plate is rectangular with a fantail at one end and a hooked projection in the centre of the opposite end. The back plate is of the same shape but without the hooked projection. There are two rivet holes at the fantail end and a single rivet hole at the other on both plates. The rivets are still in situ. The front plate has a rounded indentation in the centre of the fan edge with a linear moulded decoration running down the centre of the object, f…
Created on: Monday 7th April 2014
Last updated: Wednesday 20th August 2014
Spatial data recorded.
Record ID: LON-2A6910
Object type: COIN
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A post medieval copper alloy duit (penny) from the reign of Frederick Henry (AD 1625-1647) dating AD 1627. This is from the moneyer Steven Bencken, who operated in Holland from AD 1627-1628).
Dimensions: diameter: 20.74 mm; weight: 1.29g.
Created on: Monday 7th April 2014
Last updated: Wednesday 20th August 2014
Spatial data recorded.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 28
Search server index: valhalla
You are viewing records: 1 - 20.
1 - 20 of 28 records.