• 

  Image not taken

Record ID: HAMP-AC2217
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A copper alloy contemporary copy of a Roman radiate (barbarous) of an uncertain ruler dating to the period AD 275-285 (Reece Period 14). Uncertain reverse type. Uncertain mint.
Created on: Tuesday 1st April 2014
Last updated: Thursday 3rd April 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-A915A7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Broken and distorted post-medieval copper alloy buckle plate with a pin slot, rivet-hole, trefoil inside edge and engraved foliar decoration, very similar to Whitehead 2003, no. 423. The object has been unfolded and broken across the straightened loops, back part missing. Estimated (folded) length 27mm. Width 16mm. 16th - 17th century
Created on: Tuesday 1st April 2014
Last updated: Tuesday 1st April 2014
Spatial data recorded.

Record ID: NLM-A83675
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount, as identified by the finder. Concavo-convex mount in the form of a six pointed star or six petalled flower with a central oval ended aperture of length 6mm. One ray or petal has a small knop at its end, the others are pointed. Divisions between the rays are emphasised by incised lines. Suggested date: Post-Medieval, 1500-1650. Diameter: 36mm, Thickness: 1.6mm, Weight: 5.83gms.
Created on: Tuesday 1st April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded. This findspot is known as 'Pilham', grid reference and parish protected.

Record ID: NLM-A84697
Object type: RAZOR
Broad period: BRONZE AGE
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable razor. Cast U-shaped plate with a cutting edge which runs along one long edge and continuing along the short straight side; the other long side and the U shaped end are flattened. The section is of extremely flattened lentoid form, a point which is only apparent if it is viewed against a straight edge.This object was initially considered as a sword blade fragment, but it lacks any convincing strengthening of the middle part of the blade, and a single sided form would be unusual for a rapier. This object appears to have been robustly cleaned by the finder. Suggest…
Created on: Tuesday 1st April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-A84485
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of uncertain Tetrarch, reverse probably GENIO POPVLI ROMANI type, further details illegible, AD297-305
Created on: Tuesday 1st April 2014
Last updated: Tuesday 1st April 2014
Spatial data recorded.

Record ID: BUC-A67714
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation
A copper alloy nummus of Constantine I. Reece period: 15 [296-317] Mint: Treveri (Trier, Germany). Obverse description: Laureate cuirassed bust right. Obverse inscription: IMP CONSTANTINVS AVG.Reverse description: Sol standing with a whip and a globe. Reverse inscription: SOLINVICTO COMITI.Fourth Century reverse type: SOLI INVICTO COMITI. Reverse mintmark: PTR
Created on: Tuesday 1st April 2014
Last updated: Wednesday 23rd July 2014
Spatial data recorded. This findspot is known as 'Hardwick', grid reference and parish protected.

Record ID: BUC-A683D5
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation
A worn copper alloy radiate of Gallienus. Reece period: Period 13 [260-275]. Obverse description: Radiate bust right. Obverse inscription: GALLENIVS AVG. Reverse description: Unidentified quadruped walking left.
Created on: Tuesday 1st April 2014
Last updated: Wednesday 21st May 2014
Spatial data recorded. This findspot is known as 'Hardwick', grid reference and parish protected.

Record ID: SF-A6F8B0
Object type: CANDLESTICK
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy candlestick of Post-Medieval date. Only a fragment of the socket survives, the remainder of the object is missing due to old breaks, now worn. The socket is cylindrical in shape measuring 21.01mm in external diameter. The front face is decorated with two circumferential grooves around its middle and a similar, single, groove around its base. This candlestick measures 28.54mm in length, 20.95mm in width, 1.73mm in thickness, 6.83g in weight. Candlesticks of this type date to the late fifteenth to sixteenth centuries AD. There are parallels in Brownsw…
Created on: Tuesday 1st April 2014
Last updated: Wednesday 2nd April 2014
Spatial data recorded. This findspot is known as 'Holton', grid reference and parish protected.

Record ID: SF-A70485
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete circular copper-alloy unidentified object of unknown date. Consisting of a flat circular plate with a central circular hole. The internal face is worn in places, possibly through wear. On the back face are two parallel rectangular projections. These are 4.80mm in length, 5.56mm in width, 1.97mm in thickness. Through the centre are separate circular copper-alloy rivets, which connect the projections to the plate. On the front face where the projections connect with the plate are two parallel circular marks, which have a distinct pale green colour. These may be the rema…
Created on: Tuesday 1st April 2014
Last updated: Wednesday 2nd April 2014
Spatial data recorded. This findspot is known as 'Holton', grid reference and parish protected.

Record ID: SF-A70DD0
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy unidentified object of unknown date. It appears to be a fragment from a once circular object. At the centre of the object is a prominent circumferential casting ridge. On the upper half of the object parallel to the casting ridge is the remains of an integral projection, now broken, with a circumferential collar. The front face of the upper half is decorated with three circumferential grooves around its middle. The remains of the lower half is undecorated. This unidentified object measures 42.23mm in length, 23.29mm in width, 3.14mm in thickness, 19.86…
Created on: Tuesday 1st April 2014
Last updated: Wednesday 2nd April 2014
Spatial data recorded. This findspot is known as 'Holton', grid reference and parish protected.

Record ID: LVPL-A7ABE5
Object type: COIN
Broad period: ROMAN
County: Cheshire East
Workflow stage: Awaiting validation
A copper alloy nummus of Constantine I dating to the period AD310-319 (Reece period 15). SOLI INVICTO COMITI reverse type depicting Sol standing with globe. Mint of Trier. RIC VII 93.
Created on: Tuesday 1st April 2014
Last updated: Thursday 10th April 2014
Spatial data recorded. This findspot is known as 'Bickerton', grid reference and parish protected.

Record ID: NLM-A7CD12
Object type: HARNESS FITTING
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy harness fitting or boss. Cast discoid plate with opposed lugs on the back retaining ferrous corrosion suggesting a pair of iron pins attached this object to leather. Probably from horse gear. Very worn, corroded, and distorted. Suggested date: Post-Medieval, 1650-1800. Width: 32.3mm, Height: 29.3mm, Thickness: 2.6mm, Weight: 13.57gms.
Created on: Tuesday 1st April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded.

Record ID: SOM-A80BB6
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
A broken and incomplete post-medieval copper-alloy double-looped buckle frame with trapezoidal loops. Only one loop remains, with only a small section of one of the sides remaining from the other. The loop is rectangular in cross section. The outer edge of the loop extend into a point at its centre, flanked by rounded knops at the corners; both of these latter are now abraded. There is a groove running lengthways down the front of the extant outer edge which would have acted as a pin rest. There are shallowly projecting knops at the ends of the narrowed pin bar; the pin is missing. Th…
Created on: Tuesday 1st April 2014
Last updated: Monday 2nd June 2014
Spatial data recorded. This findspot is known as 'Cullompton CP', grid reference and parish protected.

Record ID: NLM-A811D4
Object type: THIMBLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy thimble. Cast domed or beehive shaped thimble with c.10 horizontal rows of closely spaced hand-stamped round pits, continuing in an arrangement of concentric rings on the top; worn almost smooth at the apex. Suggested date: Late Medieval, 1400-1500. Diameter: 21.2mm, Thickness (wall): 1.4mm, Weight: 9.25gms.
Created on: Tuesday 1st April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded. This findspot is known as 'near Stow', grid reference and parish protected.

Record ID: NLM-A81E82
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy hooked tg. Cast triangular tag with two attachment holes of diameter 3mm at its broad end, which is lightly engrailed, and a short backwards bent hook at the other. Read Early Medieval Class A Type 1. In profile the object now exhibits a gentle reverse S curve. Suggested date: Early Medieval, 700-1100. Length: 40.1mm, Width: 23.7mm, Thickness (plate): 1.2mm, Weight: 2.88gms.
Created on: Tuesday 1st April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded. This findspot is known as 'near Stow', grid reference and parish protected.

Record ID: NLM-A82A87
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy spearhead fragment. Cast blade of a spearhead of ogival section with a pronounced mid rib extending almost to the extreme tip (which is lost). The object is broken as the blade narrows to approach a socket (lost), where it is already of hollow construction. The cutting edges of the blade are abraded, more so on one side than the other, and probably relatively recently. Suggested date: Middle to Late Bronze Age, 1600-800 BC. Length: 78.7mm, Width: 18.7mm, Thickness (mid rib): 8.2mm, Thickness (at break near socket): 1.9mm, Weight: 21.81gms.
Created on: Tuesday 1st April 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded. This findspot is known as 'near Stow', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-A82AA8
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of a post-medieval tin-coated copper alloy wire blunt-hooked dress fastener of Read 2008 Class A, Type 1. Length 19.5mm. 16th - 17th century, or possibly more recent.
Created on: Tuesday 1st April 2014
Last updated: Tuesday 1st April 2014
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP-A82D36
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A copper alloy Roman radiate of an uncertain ruler dating to the period AD 260-296. Uncertain reverse type depicting a standing figure. Uncertain mint.
Created on: Tuesday 1st April 2014
Last updated: Thursday 3rd April 2014
Spatial data recorded.

Record ID: SWYOR-A861F7
Object type: VESSEL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete Medieval to post-Medieval cast copper-alloy cooking vessel leg dating from about AD 1250-1650. This leg is oval in cross-section and is mis-cast, with a deep concavity in the wide end, and a hole and cavity in the other end which is rounded and tapered. It has a light green and brown coloured patina. Compare IOW-FA6317 which is a larger example of similar style.
Created on: Tuesday 1st April 2014
Last updated: Tuesday 1st April 2014
Spatial data recorded.

Record ID: NMS-A86BB2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy horse harness pendant, shield-shaped, suspension-loop bent forward and one angle of upper edge bent back toward the reverse. Perforation above point at base. Corroded, no trace of decoration on face. Width (unbent) 40mm. Length 52.5mm. 13th-14th century.
Created on: Tuesday 1st April 2014
Last updated: Thursday 12th June 2014
Spatial data recorded.