Record ID: IOW-D96D31
Object type: COIN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A post-Medieval silver halfgroat of Charles II (1660-1685 AD), minted at London. Initial mark: crown (North 1991: 210, ref: 2772). Obverse: CAROLVS.II.D:G:MAG:BRI:FRA:ET:HIB:REX; Crowned bust left with II (mark of value) behind head Reverse: CHRISTO.AVSPICE.REGNO (I reign under the auspice of Christ); Square shield on cross fleury The coin has been pierced at 9 o' clock on the obverse.
Created on: Thursday 16th February 2012
Last updated: Thursday 27th February 2014
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-D73DE4
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published
A Roman copper-alloy coin, probably a dupondius or as, AD 41-250. Obverse and reverse illegible.
Created on: Thursday 16th February 2012
Last updated: Saturday 18th February 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-D72A62
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published
A Roman copper-alloy nummus of Constans dating to the period AD 348 to 350. FEL TEMP REPARATIO reverse type depicting phoenix on rocks. Mint unclear. Reece period 18. Obverse: DN CONSTAN[...]; Pearl diademed, draped and cuirassed bust right Reverse: [FEL TEMP REPARATIO]; Phoenix on rocks
Created on: Thursday 16th February 2012
Last updated: Saturday 25th August 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-D71522
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Medieval cast copper-alloy and gilded harness pendant (c. 1300-c. 1400 AD). The pendant is in the form of a fleur-de-lis. It is moulded at the front and flat at the rear. At the centre of the top there is an abraded break where the shaft of the suspension loop was situated. This pendant has no patina and is mainly covered in light green and greyish copper-alloy corrosion products. Minute flecks of gilding can be seen at the front. Length: 22.05mm; width: 20.96mm; thickness: 4.12mm. Weight: 4.45g. Similar artefacts have been recorded on the Portable Antiquities Scheme…
Created on: Thursday 16th February 2012
Last updated: Saturday 18th February 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-D6AE22
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Early Medieval (Anglo-Scandinavian) to Medieval cast copper alloy harness link or strap distributor (1000-1100 AD). The distributor has four short arms in the form of an equal armed plain cross, sub rectangular in cross section, slightly convex at the top and flat on the underside. At each end of the arm there would have been a sub-circular loop with a sub-circular aperture. On this example, one loop is extant, one is incomplete and the other two are missing due to breaks. The surviving loop is bevelled on the top and underside. At the centre of the cross there is sepa…
Created on: Thursday 16th February 2012
Last updated: Saturday 18th February 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: PUBLIC-D65704
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Published
A post-medieval copper-alloy double-looped buckle dating to c. 1550-1650. It consists of a complete pointed-oval shaped frame; the pin is missing. The outer edges of the frame are pointed and have moulded decoration, probably of rosettes; further moulded decoration is visible but unclear on the rest of the front of the frame. Both outer edge curves in slightly at the centre of its internal surface. The pin bar is narrowed with further moulded decoration at either end and some possible iron corrosion in the centre of the bar suggests that the pin was composed of iron. The frame meas…
Created on: Thursday 16th February 2012
Last updated: Thursday 19th May 2016
Spatial data recorded. This findspot is known as 'Near Lewes', grid reference and parish protected.

Record ID: NARC-D52AE3
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A slver hammered penny of Edward III.
Created on: Thursday 16th February 2012
Last updated: Thursday 16th February 2012
Spatial data recorded.

Record ID: NARC-D4E805
Object type: COIN
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A slver hammered penny of Edward III.
Created on: Thursday 16th February 2012
Last updated: Thursday 16th February 2012
Spatial data recorded.

Record ID: NARC-D49FE3
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A slver hammered penny of Edward III.
Created on: Thursday 16th February 2012
Last updated: Thursday 16th February 2012
Spatial data recorded.

Record ID: NARC-D477B2
Object type: COIN
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A slver hammered penny of Edward II. Probably Class 11. London mint.
Created on: Thursday 16th February 2012
Last updated: Thursday 16th February 2012
Spatial data recorded.

Record ID: NARC-D44E61
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation
A copper alloy nummus. GLORIA EXERCITVS issue.
Created on: Thursday 16th February 2012
Last updated: Thursday 16th February 2012
Spatial data recorded.

• 

  Image not taken

Record ID: NARC-D43A26
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A silver hammered halfgroat of Elizabeth I.
Created on: Thursday 16th February 2012
Last updated: Thursday 16th February 2012
Spatial data recorded.

Record ID: CAM-D3BC91
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A late Anglo-Saxon lead disc brooch of Weetch type 5. The brooch has a raised pellet at the centre that stands 2.20mm proud of the brooch surface and has a diameter of 4.42mm. Surrounding this raised pellet is a series of concentric circles. All of the fields between these circles with the exception of the first, that which surrounds the pellet, are segmented creating an effect of slightly raised circles and transverse lines with small trapezoidal depressed fields between. The plate has a thickness of 1.97mm increasing to 3.55mm over the central pellet. The reverse has a loop that ben…
Created on: Thursday 16th February 2012
Last updated: Wednesday 21st November 2018
Spatial data recorded. This findspot is known as 'South Cambridgeshire Area', grid reference and parish protected.

Record ID: CAM-D3AA53
Object type: NAIL CLEANER
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Published
Copper-alloy nail cleaner of Badock Type of Variant 2 with a decorated neck ofRoman date. The shaft of this nail cleaner has a length of 29.03mm, maximum width of 10.61mm narrowing to 3.79mm and is 1.33mm thick. The loop is in the same plane as the shaft. The loop consists of a circular perforation of 2.69mm diameter set within a trapezoidal plate measuring: maximum width 6.62mm, length 6.32, thickness 0.71mm. Between the attachment loop and shaft the artefact narrows to form a collar formed of moulded transverse grooves and raised ribs that has a width of 3.76mm and thickens to 3.55m…
Created on: Thursday 16th February 2012
Last updated: Sunday 16th January 2022
Spatial data recorded. This findspot is known as 'South Cambridgeshire Area', grid reference and parish protected.

Record ID: CAM-D39ED6
Object type: TWEEZERS
Broad period: UNKNOWN
County: Cambridgeshire
Workflow stage: Awaiting validation
Copper-alloy tweezers. Tweezers can be difficult to date as they alter very little between the start of the Roman period through to the early Anglo-Saxon period (43-750). These tweezers are formed from a single strip of copper-alloy that has a rectangular cross-section. The strip has been bent in half to form a suspension loop at the closed end. The external surface of the loop has a slight 'U' shaped depression along the centre that stops on both sides before the two sides of the strip come together again. The oval gap created by the loop has a length of 2.76mm and width of 1.32mm. T…
Created on: Thursday 16th February 2012
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'South Cambridgeshire Area', grid reference and parish protected.

Record ID: CAM-D38556
Object type: SCABBARD
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A copper-alloy scabbard chape of later Medieval to early Post-Medieval date, c.1450-1600. This chape has a cast front, the lower half of which is shaped as a scallop shell with radiating alternating grooves and raised lines. This scallop shape has a height of 20.27mm, width of 28.84mm and thickness of 6.08mm. At the base of the curve is a small knop measuring: height 2.93mm, width 4.21mm and thickness 3.24mm. Set at the top of the scallop shape is a cluster of three open work circles arranged as a trefoil (one below and between the upper two). These circular perforations have a dia…
Created on: Thursday 16th February 2012
Last updated: Monday 18th June 2018
Spatial data recorded. This findspot is known as 'South Cambridgeshire Area', grid reference and parish protected.

• 

  Image not taken

Record ID: SOM-D37691
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation
Three amorphous blobs of copper alloy with rounded shapes that suggest they are cooled runs of liquid metal and two posslbe mis-cast pieces or other waste. Of the latter two one is a flat piece of copper alloy with one roughly right angle corner and the opposite edge bent up at c.70 degrees, 22.65grams. The other is a thicker flat piece with again one edge bent up through a curve to 70 degrees and the opposite edge turned down at a right angle, with an irregular break across it, c.19.44 grams. Both have many air bubbles in them, similar to the other casting waste. The other pieces we…
Created on: Thursday 16th February 2012
Last updated: Thursday 16th February 2012
Spatial data recorded. This findspot is known as 'Carhampton', grid reference and parish protected.

Record ID: CAM-D369C0
Object type: COIN
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A silver hammered penny of Elizabeth I, 1558-1603. Obverse shows crowned bust left. Obverse legend reads E.D. G. ROSA SINE SPINA. The mint mark is probably a hand which would place the coin in the fifth issue, 1582-1600 Spink 42nd Ed. p.235-247 or third coinage according to North, J.J. 1991 p.130-140, 1583-1603). Reverse shows the royal shield with a long cross fourchee dividing the legend. Reverse legend reads CIVI/TAS/LON/DON. Die axis is 12 o'clock, weight is 0.47g, diameter is 12.92mm, thickness is 0.60mm. See North, J.J. 1991, p.130-140, no.1988.
Created on: Thursday 16th February 2012
Last updated: Tuesday 21st February 2012
Spatial data recorded. This findspot is known as 'South Cambridgeshire Area', grid reference and parish protected.

Record ID: LON-D35356
Object type: COIN
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
A extremely well preserved post medieval tin halfpenny of William and Mary, dating to 1691 to 1692 AD (Seaby 2713). It has a square copper core. It measures 27.9mm (diameter) x 2.6mm (thickness) and weighs 10.10g.
Created on: Thursday 16th February 2012
Last updated: Wednesday 30th October 2013
No spatial data available.

Record ID: CAM-D34D30
Object type: COIN
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A silver hammered halfgroat of Henry VII, 1485-1509. Obverse shows forward facing crowned bust. Obverse legend reads hENRIC' DI GRA REX ANGL Z FR. Obverse initial mark is a Tun, indicating the provincial mint at Canterbury 1486-1504. Reverse shows solid long cross fourchee with three pellets per quarter. Reverse legend reads POSVI/DEVM A/DIVTO/R[EM]EV - CIVI/TAS/CAN/TOR. This coin is a type I facing bust issue, with no stops. See North, J.J. 1991, p.102, no.1712, class III c. Die axis is 1 o'clock, weight is 1.38g, diameter is 19.55mm, thickness is 0.72mm.
Created on: Thursday 16th February 2012
Last updated: Tuesday 21st February 2012
Spatial data recorded. This findspot is known as 'South Cambridgeshire Area', grid reference and parish protected.