Record ID: SWYOR-5635F6
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Medieval silver coin; a penny probably of Edward III, Post Treaty coinage (1369 - 1377), minted at Durham. The coin has a pellet or annulet on the breast and saltire stops, but is well clipped, so few other details are visible. Compare North number 1297.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-55F0F7
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Medieval silver coin; a penny probably of Edward I or II (1272 - 1327), issued at the York episcopal mint. The coin is worn, cracked and bent and further details cannot be seen.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-55DA42
Object type: MOUNT
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Post Medieval cast copper-alloy mount of probable 17th century date. The mount takes the form of a convex oval plate with slightly concave back . It has egg-shaped centre flanked by constrictions at top and bottom from which expand fan or shell shaped terminals. There is a larger terminal at the wider end of the central plate and a smaller one at the point. The terminals are decorated with incised radiating lines on the front and indents on the outer edge. Extending from the reverse are two integral attachment spikes. They are circular in section and both have old breaks near the st…
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-55C2B6
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy seal matrix of Post Medieval date. The matrix itself has a rectangular face with rounded corners. From each corner and side of the matrix the sides taper up to form a stem with a central collar. A smaller second collar above that leads to an integral circular suspension loop. The suspension loop terminates a small knop on the top. The hole in the suspension loop is aligned parallel with the longest axis of the rectangular matrix and is filled with iron corrosion from a means of attachment. The matrix face is too corroded to be able to make out the design. Compare SUSS-E502E0.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-55A4B7
Object type: AWL
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation
A complete copper alloy awl of probable Bronze Age date. The shaft is sub-rectangular in section and tapers in thickness towards both end, but in plan flares at one end and tapers at the other. One end is pointed, whilst the other is chisel shaped but rounded. The patina is brown and green and pitted. Compare SOM-7C6ED1 and BH-C6DC45.
Created on: Friday 10th February 2012
Last updated: Monday 11th May 2020
Spatial data recorded.

Record ID: SWYOR-557FD5
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Medieval coin; a penny of Edward I (1272 - 1307), probable class 10cf (1302 - 1310), minted at Durham. See North number 1040 - 1043. Most of the obverse design is illegible.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-552D48
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Medieval Scottish coin; a penny of Alexander III (1249 - 1286 AD), second coinage (1280 - 1286), type D. The edge of the coin is damaged in one place. See Seaby Volume II number 5054.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-550AF1
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast, copper alloy sword belt fitting dating from the post-medieval period, AD1500-1700. It consists of a flat body decorated with a floral and foliage pattern. It has a small knop at one end, and expanded into a fleur-de-lis terminal at the other. The wide end is damaged and may have extended into a loop or hook fitting. There is some ferrous corrosion in the centre of the wide end which might be the remains of a rivet. There are a number of similar belt fitting on the database; for example HESH-51ADE4 and SWYOR-B7BD55.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-54E1A7
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Medieval coin; a penny of Edward I (1272 - 1307 D), class 9a1 (1300 - 1302), minted at London. See North number 1036.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-54B783
Object type: TOKEN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A large and crude lead alloy uniface token of probably Medieval or Post Medieval date. The design is a geometric pattern (Powell type 9) of lines. There is one line across the base which is formed of conjoined solid triangles, with three lines radiating from the centre. This design may be based on the better made token recorded as SWYOR-549FC3 which is from the same field. The edges of the token are rounded untidy.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: SWYOR-549FC3
Object type: TOKEN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A lead alloy uniface token of probably Medieval or Post Medieval date. The design is a geometric pattern (Powell type 9) of lines formed of conjoined solid triangles. There are two lines across the base, with three lines radiating from the centre of the upper line. There are also initials (Powell type 2): a letter S on the left and a B with a gap between the two loops on the right. The letters are untidy. Compare to SWYOR-54B783 which may be a crude copy of this token. It was found in the same field.
Created on: Friday 10th February 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: YORYM-5479D4
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A complete cast copper alloy harness pendant of medieval date. The pendant is quatrefoil in plan and is decorated with a worn heraldic devise and coloured enamel. The devise is of a central lion statant within a square of red enamel framed within an irregular pattern of blue enamel. The reverse is flat and undecorated and the suspension loop projecting from the upper edge is worn. The metal is a mid blackish-brown colour with some green patches and is worn. The harness pendant is 28.5mm long, 21.1mm wide, 3.2mm thick and weighs 3.9g. Harness pendants were common in the 13th and 14t…
Created on: Friday 10th February 2012
Last updated: Wednesday 22nd February 2012
Spatial data recorded. This findspot is known as 'Ebberston', grid reference and parish protected.

Record ID: SWYOR-546ED1
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper alloy medieval casket key dating from the 12th to late 14th century AD (Egan et al 1998:111-112). The key has a circular bow, and a shank that is sub-rectangular in plan and circular in section, with a bulbous collar before the bow. The bit is a rectangular tab with a wide cleft in the leading edge. The shank is hollow (although now filled with mud). Similar examples can be seen in Egan et al 1998.
Created on: Friday 10th February 2012
Last updated: Sunday 24th May 2020
Spatial data recorded.

Record ID: SWYOR-545727
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
A silver Roman Coin; a denarius probably of Caracalla, as Caesar (AD. 196-198). The reverse shows Mars advancing right, holding spear and trophy, MARTI VLTORI. Minted in Rome, AD. 196-8. Compare DENO-133836 and BUC-06B854.
Created on: Friday 10th February 2012
Last updated: Saturday 9th May 2020
Spatial data recorded.

Record ID: SWYOR-542798
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
A silver Roman coin; a denarius of Caracalla dating from AD 202. VOT SVSC DEC PON TR P V COS reverse showing Caracalla standing left sacrificing out of patera over altar and holding book. Compare BUC-4DA2A4 which cites RIC IV, p. 222, no. 68 for reverse type.
Created on: Friday 10th February 2012
Last updated: Saturday 9th May 2020
Spatial data recorded.

Record ID: SWYOR-53C396
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy Roman coin; a radiate, emperor unknown, probably dating from 260 - 275 AD.
Created on: Friday 10th February 2012
Last updated: Sunday 10th May 2020
Spatial data recorded.

Record ID: SWYOR-538F83
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A Medieval copper alloy buckle dating from the late 14th century. It is an example of Meols Type 10 which has an oval frame with an expanded outer edge decorated with a projecting knop at each end and three grooves across the outer edge. The bar is recessed and offset. The copper alloy wire pin is wrapped round the bar.
Created on: Friday 10th February 2012
Last updated: Sunday 24th May 2020
Spatial data recorded.

Record ID: SWYOR-537903
Object type: MOUNT
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete Medieval cast copper alloy bar mount. It has a central lobe, with a hole, and two tapering bars of which only one survives. It has a terminal lobe which is pierced by a copper alloy rivet. The mount is mostly semi-circular in section, with a flat back; but the bars is faceted making it triangular in section. It is decorated with a raised ridge across each end of the bar. It dates from 1150-1350. See also PAS record IDs SWYOR-B04BD3, BERK-8CFC90 and KENT-D00533 for similar bar mounts. Also, Egan fig. 1154.
Created on: Friday 10th February 2012
Last updated: Sunday 24th May 2020
Spatial data recorded.

Record ID: YORYM-535478
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation
A fragment of a cast copper alloy socketed axehead of Bronze Age date. The fragment is the blade end including the base of the socketed area. It is rectangular in plan and V-shaped in section with a worn cutting edge and rounded corners. The breaks at the socketed end appear to be mostly old though there are also some signs of more recent damage. The metal has a mid blackish-green patina and is very worn. The fragment is 42.3mm long, 28.1mm wide, 11.6mm thick and weighs 36g.
Created on: Friday 10th February 2012
Last updated: Friday 2nd December 2022
Spatial data recorded. This findspot is known as 'Hunmanby', grid reference and parish protected.

Record ID: SWYOR-535342
Object type: TOGGLE
Broad period: IRON AGE
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper alloy toggle of late Iron Age or Early Roman date. It is a cylindrical bar decorated with 11 grooves running round the bar. There is a hollow in each end of the bar. From the centre of one side projects a broken loop, with one of the grooves dividing the loop into two halves as well. The breaks are worn and patinated. The toggle has a grey green patina. Compare LON-1A6571, CAM-DEB4B0, DENO-FE3BA7 and GLO-1B1400. HAMP-2931B4 and SWYOR-7D71D7 may also be related.
Created on: Friday 10th February 2012
Last updated: Sunday 24th May 2020
Spatial data recorded.