Record ID: SWYOR-8185B3
Object type: MOUNT
Broad period: MEDIEVAL
County: Wakefield
Workflow stage: Awaiting validation
A Medieval copper alloy mount, enamelled in the Limoges tradition and probably dating from about the 12th to 13th centuries AD. The mount is sub circular in shape. Much of the enamel survives and where it is missing the metal is keyed for better adhesion. The decoration depicts three female figures standing in a circle, holding hands. The woman on the right wears a red robe, the central woman a white one and the one on the left a blue gown. The red woman rests here head on the white lady's shoulder and the white lady rests her head on top of the red woman's head. The blue lady is look…
Created on: Tuesday 31st January 2012
Last updated: Tuesday 26th May 2020
Spatial data recorded.

Record ID: LVPL-801163
Object type: MOUNT
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Cast copper alloy belt or box mount dating to the late Medieval period. The object consists of a narrow bar with a pierced palmate terminal at either end. The object is D-shaped in cross-section and has a dark green patina. It is in good condition. A similar example is no.1789, p19, Crummy, (1988).
Created on: Tuesday 31st January 2012
Last updated: Tuesday 21st February 2012
Spatial data recorded. This findspot is known as 'Sandbach', grid reference and parish protected.

• 

  Image not taken

Record ID: WMID-7EE967
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A copper-alloy post-medieval mount in the form of an elongated acorn (c. 1600-c. 1700 AD). The mount is slightly convex at the front and slightly concave at the rear. At the front the seed (or fruit) and the cupola are worn and plain and it has a pair of parallel horizontal grooves about mid-way along its length. At the base of the cupola the stalk is prominent and off-centre. On the rear face there are two integral spikes, one at each end and both broken. Patches of a dark green patina survive on the corroded and abraded front. The rear face is corroded and abraded. Measuresments…
Created on: Tuesday 31st January 2012
Last updated: Monday 5th March 2018
Spatial data recorded.

Record ID: SUSS-7E8614
Object type: MOUNT
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A nearly complete cast copper alloy zoomorphic decorative mount, probably from the Medieval period, c. 12th-c. 13th century AD. The mount seems to be in the figure of either an aquatic mammal, such as a beaver or otter, or more likely, a stylised interpretation of a dog or lion. The mount is sub-rectangular in plan and in general is comprised of two body segments connected by a narrow torso: the front segment consists of a head (12.72 mm thick) and neck (12.50 mm thick) with two front 'paws' rising vertically from the base of the mount; the second segment consists of a wide haunch wit…
Created on: Tuesday 31st January 2012
Last updated: Monday 13th February 2012
Spatial data recorded.

• 

  Image not taken

Record ID: WMID-7E01D0
Object type: MOUNT
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy Roman mount. The mount was once figure of eight in plan, but is now broken and one end loop is incomplete. It has hollow cast reverse and a rounded front. The mount is formed from two opposing crescents, back to back, which terminate in broad 'trumpet heads'. An integral loop then spans the opposing trumpet heads at either end to form the end loops of the figure of eight. The ends of the trumpet heads are raised ridges. The reverse of the mount is plain and hollow behind the trumpet mouldings. At one end is a short integral circular shaft with an integr…
Created on: Tuesday 31st January 2012
Last updated: Monday 5th March 2018
Spatial data recorded.

Record ID: SOM-7DDE83
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post-medieval cast copper alloy mount. The mount is sub lozengiform in plan, the upper point is stepped creating an effect of three small knops arranged in a triangle and the opposite point is extended into an elongated sub-triangular point. It has a slightly convex front and concave back. The front has angled incised lines but the decoration is very worn. The reverse of the mount is plain with two rivets arranged down the centre. One tapers to a sharp point and s bent 90 degrees towards the centre and the other is broken with only a protruding stump remaining. The mount is 36.8 mm lo…
Created on: Tuesday 31st January 2012
Last updated: Thursday 2nd February 2012
Spatial data recorded. This findspot is known as 'Chedzoy', grid reference and parish protected.

Record ID: SUSS-7DCD04
Object type: MOUNT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
An incomplete and corroded Medieval to Post Medieval cast copper alloy mount. The mount is flat and sub-rectangular with a single square-cross-section integral prong projecting at right angles from the centre of the reverse side. The tip of the prong is missing from an old break. The front face is decorated with a raised border within which there is a foliate scroll in the form of an elaborate "S". The foliate form of decoration is perhaps more suggestive of a Post Medieval date. The single square-pin indicates the mount could possibly be from an item of furniture or a casket. . The m…
Created on: Tuesday 31st January 2012
Last updated: Wednesday 28th February 2018
Spatial data recorded.

Record ID: SOM-7DC7E6
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post-medieval copper alloy mount probably around 17th century in date. The front plate is flat and sub-rectangular with the corners cut off at each end and the sides concave. The edges are stepped downwards and outwards. There are remains of floral decoration on the front including a circle of indented dots in the centre and a row of crescents around the edge but it is very corroded and some details are obscured. On the flat reverse, there are three rivets on individual stepped platforms, arranged in a row down the centre. All the rivets are broken with only stubs remaining. The objec…
Created on: Tuesday 31st January 2012
Last updated: Thursday 2nd February 2012
Spatial data recorded. This findspot is known as 'Chedzoy', grid reference and parish protected.

Record ID: NLM-7C11C4
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable mount. Cast mount comprising a knop with lug and the stub of a rivet in situ, a hemispherical concavo-convex boss with a textured display face, and a further knop with a flattened rivet or rove on its back and a hook below it. This object differs from later medieval purse hangers and pendent mounts, though the fastening with separate rivets might be seen as a medieval trait. The form may relate it to sword hanging suites of 16th to 17th-century date, though this may have been intended for a distinct purpose. Suggested date: Early Post-Medieval, 1500-1600. Le…
Created on: Tuesday 31st January 2012
Last updated: Monday 11th January 2021
Spatial data recorded.

Record ID: LVPL-7BEBB3
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy bar mount dating to the Medieval period. The object consists of a raised central oval fitting from which projects a tapering bar from each end. It is D-shaped in cross-section. Each bar tapers to a circular terminal which is pierced possibly to contain a rivet. The central oval has a large circular hole. The object has a greyish patina and has been tinned. A similar example is no.141, p18, Read, (2001). It can be dated to c.1350-1400.
Created on: Tuesday 31st January 2012
Last updated: Wednesday 8th February 2012
Spatial data recorded. This findspot is known as 'Scopwick', grid reference and parish protected.

Record ID: WMID-7B9515
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A cast copper-alloy mount in the form of an eagle with its wings spread. The mount is post-medieval to modern in date, probably 18th century and is probably from the lid of a vessel. The bird's head is angled to the left and feather's are represented by moulded detail on the top and bottom. The mount is clearly broken and two lugs where the bird's feet would be were presumably for attachment. Much of the surface metal retains traces of a black paint. The mount measures 50.72 mm long, 50.31 mm wide 16.03 mm thick and weighs 45.1 grams. Several similar examples are recorded on the P…
Created on: Tuesday 31st January 2012
Last updated: Sunday 31st January 2016
Spatial data recorded.