Record ID: CORN-9DCD87
Object type: SEAL
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Glass bottle seal with raised lettering in the form of an 'I' above 'Pra'[...] above the date 1[7..]. The I is the first initial of the owner of the bottle that the seal was attached to, and the lower letters are part of the surname. The style of the lettering, comparing it to other examples in the Royal Institution of Cornwall's collection, and the dark green glass suggest that the seal was attached to an 18th-century bottle.
Created on: Wednesday 12th May 2010
Last updated: Wednesday 12th May 2010
Spatial data recorded.

Record ID: CORN-9D4401
Object type: COIN
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Silver groat of Edward III (1337-1377), Fourth coinage (1351-1377), London series G (1356-1361), initial mark cross 3, Spink 1570, North 1193 (Lombardic m, closed C and E, R with wedge-shaped tail, annulet stops and all arches fleured, may be annulet below bust but too worn to make out)
Created on: Wednesday 12th May 2010
Last updated: Wednesday 12th May 2010
Spatial data recorded.

Record ID: WAW-9BA396
Object type: STRAP FITTING
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
A possible incomplete cast copper alloy strap fitting. The strap fitting is formed of an incomplete figure of eight loop with a possible third loop at the base, which is only indicated by two broken terminals. The three loops appear to have been cast in one piece. The complete loop has what may be a casting imperfection on the interior edge. The object has an abraded surface. It measures 34.82mm long, 19.43mm wide, 7.03mm thick and weighs 9.1g. The object is possibly a strap fitting which could be from a belt loop, a personal strap fitting, bridle fitting or non-load be…
Created on: Tuesday 11th May 2010
Last updated: Thursday 20th May 2010
Spatial data recorded.

Record ID: WAW-9B8633
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
Roman coin: copper alloy radiate of the late third century. Minted in an unknown mint between 275 and 296 AD.
Created on: Tuesday 11th May 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded.

Record ID: WAW-9B7131
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
Post Medieval coin: penny of Elizabeth I (1558-1603) minted in London between 1560 and 1561 AD. North No. 1988.
Created on: Tuesday 11th May 2010
Last updated: Thursday 20th May 2010
Spatial data recorded.

Record ID: WAW-9B5793
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
Medieval coin: penny of Henry II (1154-1189) which has been cut into a cut farthing. Crossand crosslets (Tealby) type minted between 1158 and 1180. North Nos. 952-961.
Created on: Tuesday 11th May 2010
Last updated: Thursday 20th May 2010
Spatial data recorded.

Record ID: WAW-9B3DB0
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
Medieval coin: penny of possibly Edward I minted in an unknown mint between 1279 and 1307.
Created on: Tuesday 11th May 2010
Last updated: Thursday 20th May 2010
Spatial data recorded.

Record ID: WAW-9B1427
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
Medieval coin: penny of Edward I (1279-1307) minted in London between 1279 and 1301 AD.
Created on: Tuesday 11th May 2010
Last updated: Thursday 20th May 2010
Spatial data recorded.

Record ID: NARC-994A34
Object type: BADGE
Broad period: MEDIEVAL
Workflow stage: Published
Square lead badge, possibly a pilgrim badge, but with no obvious parallel in Spencer 1998 (Pilgrim Souvenirs and Secular Badges: Medieval Finds from Excavations in London 7) or Spencer 1990 (Pilgrim Souvenirs and Secular Badges: Salisbury and South Wiltshire Medieval Catalogue Part 2). Pellets around the outer edge with raised ridges running diagonally across the face. The reverse has what appears to be a pin mechanism made out of lead.
Created on: Tuesday 11th May 2010
Last updated: Monday 6th June 2011
No spatial data available.

Record ID: PUBLIC-98E5D3
Object type: TAP
Broad period: POST MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation
A bronze circular cap 20mm diameter and 24mm in length. The thickness being 1mm. The closed top has a cut diamond shape to allow the appropriate size key to fit through the slot and operate the barrel tap enclosed. The barrel has a 1mm incised line around its circumference which is around the the middle otherwise it has no other decoration. Aproximate usage for this lock is attributed to the period 1800 - 1900.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 27th September 2016
Spatial data recorded. This findspot is known as 'Nr Codicote', grid reference and parish protected.

Record ID: CORN-98ADA3
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Clipping of a silver shilling of Elizabeth I (1558-1603), North First Issue (1558-1561), Spink Second Issue (1560-1561), mintmark cross-crosslet (on reverse), c.1560-1561, North 1985, Spink 2555
Created on: Tuesday 11th May 2010
Last updated: Wednesday 12th May 2010
Spatial data recorded.

Record ID: DEV-98A691
Object type: COIN
Broad period: ROMAN
County: Devon
Workflow stage: Awaiting validation
Roman copper alloy coin. The coin is a nummus, dating from 330- 335AD. Reverse type: GLORIA EXERCITVS, two soldiers with two standards.
Created on: Tuesday 11th May 2010
Last updated: Wednesday 27th October 2010
Spatial data recorded.

Record ID: DEV-987797
Object type: COIN
Broad period: ROMAN
County: Devon
Workflow stage: Awaiting validation
Roman copper alloy coin. The coin is a sestertius dating from c. 50 - 260 AD.
Created on: Tuesday 11th May 2010
Last updated: Thursday 21st October 2010
Spatial data recorded.

Record ID: BH-983E13
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy radiate or nummus of AD c. 260-402. The coin has an irregular flan, is very worn and corroded. It measures 13.8mm in diameter, 1.3mm thick and weighs 0.93g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded. This findspot is known as 'Much Hadham', grid reference and parish protected.

Record ID: BH-982587
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy radiate or nummus of AD c. 260-402. The coin has an irregular flan, is very worn and corroded. It measures 14.1mm in diameter, 0.6mm thick and weighs 0.81g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded. This findspot is known as 'Much Hadham', grid reference and parish protected.

Record ID: BH-980D97
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy contemporary copy of a nummus of Constantius II (probably); FEL TEMP REPARATIO (legionary spearing fallen horseman) reverse, minted AD 355-361. The coin is very worn and corroded. It measures 10.3mm in diameter, 2.6mm thick and weighs 1.5g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded. This findspot is known as 'Much Hadham', grid reference and parish protected.

Record ID: SF-97FE93
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
An cast copper-alloy object of uncertain function or date. It is cylindrical in form with an oval shaped section with worn surfaces that have a pale green patina. On one side of the object are two identical areas of moulded decoration consisting of raised crescent shaped mouldings with narrow transverse collars to either side. Both ends are rounded and have triangular notches oriented on the same side of the object making it uncertain as to whether this is the deliberate form of the object or if they both terminate in old breaks. The entire object measures 47.81mm in length, 3.94mm i…
Created on: Tuesday 11th May 2010
Last updated: Thursday 10th June 2010
Spatial data recorded. This findspot is known as 'Near Eye', grid reference and parish protected.

Record ID: BH-97F841
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy dupondius or as of 1st or 2nd century AD date. The surfaces are very worn and corroded. It measures 27mm in diameter, 3mm thick and weighs 10.47g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded. This findspot is known as 'Much Hadham', grid reference and parish protected.

Record ID: YORYM-97EF77
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A complete cast copper alloy buckle of medieval date. The object is a double-loop annular buckle with slightly bevelled sides. The metal is a mid brownish-green colour and is slightly worn. The buckle is 19.2mm in diameter, 2.1mm thick and weighs 1.4g. Buckles of this type date to circa 1350-1650. Similar examples can be seen in Whitehead, p.45.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 18th May 2010
Spatial data recorded. This findspot is known as 'Barkston Ash', grid reference and parish protected.

Record ID: PUBLIC-97EE83
Object type: BADGE
Broad period: MODERN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper alloy pressed metal Military Cap badge of the Heavy Machine Gun Corps. The badge depicts crossed Vickers-Maxim machine guns surmounted with a King' crown. On the reverse is a metal retaining guide for insertion into a military hat or cloth cap.
Created on: Tuesday 11th May 2010
Last updated: Monday 9th April 2012
Spatial data recorded. This findspot is known as 'Little Wymondley', grid reference and parish protected.

Record ID: DEV-97E918
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
Postmedieval copper alloy mount of 17th century date. The mount is flat and symmetrical, with 'trefoil' mouldings at each end. The reverse has an integral attachment lug at each side. See reference below for similar type.  
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded.

Record ID: HESH-97DF42
Object type: COIN
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation
Silver cut half penny of probably John, Mint London Class 5b or 6b (1209-1217). Due to the rpeservation of the coin a more precise date cannot be reached, North: 973 / 974
Created on: Tuesday 11th May 2010
Last updated: Monday 23rd August 2010
Spatial data recorded. This findspot is known as 'Upper Wye Valley', grid reference and parish protected.

Record ID: SF-97DBF7
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy bar mount of Medieval date. It has a square central panel that is rectangular in section with a central circular rivet hole containing the corroded remains of an iron rivet. At either end the mount has projecting terminals that are narrower than the central panel, triangular in section and have moulded decoration comprising numerous transverse grooves. The underside of the mount is flat and undecorated. This mount measures 17.07mm in length, 6.74mm in width (at central panel), 6.07mm in thickness (including rivet), and weighs 2.08g. This is a Medieval bar mount o…
Created on: Tuesday 11th May 2010
Last updated: Friday 11th June 2010
Spatial data recorded. This findspot is known as 'Near Eye', grid reference and parish protected.

Record ID: BH-97DB16
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy nummus of Constantius II or Delmatius; GLORIA EXERCITVS (one standard) reverse, minted AD 335-341. The coin has an irregular flan, is worn and corroded. It measures 16mm in diameter, 0.6mm thick and weighs 0.59g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded. This findspot is known as 'Much Hadham', grid reference and parish protected.

Record ID: LIN-97D2C6
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A sprung dolphin brooch dating to the early Roman period. The brooch has undecorated semi-cylindrical wings; the spring and pin are missing. There is the remains of a rearward hook in the centre of the wings on the reverse. The bow is comma shaped in profile and oval in cross-section, tapering to a pointed foot. The catchplate is missing.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded.

Record ID: NLM-97C5F1
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy key fragment. Circular bit of a slide key, probably for a barrel padlock with an elongated T-shaped slot (Ottaway and Rogers 2002, fig. 1444). The bit features two rectangular slots set at right angles to each other; a straight round-section shank is broken. Suggested date: Medieval, 1100-1300. Length: 43.31mm, Diameter of bit: 21.06mm, Thickness (shank): 5.18mm, Weight: 6.25gms.
Created on: Tuesday 11th May 2010
Last updated: Monday 1st July 2019
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: LIN-97C2B1
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
An irregular piece of copper alloy, possibly a casting jet. The object is roughly oval in plan and plano-convex in cross-section with a small irregular 'stud' projecting from the domed side. These two studs are reminiscant of casting sprues.
Created on: Tuesday 11th May 2010
Last updated: Thursday 6th September 2012
Spatial data recorded.

Record ID: NLM-97B7C7
Object type: THIMBLE
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy Thimble. Sheet metal almost flat-topped conical thimble with fine, probably machine-pressed, indentations around its sides; three rouletted circumferential bands of finer indentations provide a lower border. Crushed, and soil filled. Suggested date: Modern, 1850-1900. Height: 21.43mm, Width: 19.16mm, Thickness of sheet: 0.3mm, Weight (soil filled): 4.06gms.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 22nd June 2010
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: YORYM-97B1C3
Object type: COIN
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A silver penny of Henry VII from his facing bust, king enthroned issue, royal shield over long cross dividing legend, York mint by Archbishop Rotherham, 1485-1509. Ref: North, Vol II, p.103, no.1729.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 18th May 2010
Spatial data recorded. This findspot is known as 'Cottingwith', grid reference and parish protected.

Record ID: CAM-97B003
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A curvy strip of copper-alloy which is a bent fragment of a c.15th century buckle frame. The fragment weighs 9.70g and is approximately 110mm long, maximum width of 6.66mm and maximum thickness of 2.16mm. Both ends of the strip seem to have transverse breaks, which are likely to have occurred in antiquity as they are slightly rounded and patinated. 12mm from one break and 14mm from the other the strip thickens, on the inner side to c.4.54mm to allow for a 1.66mm cylindrical perforation to cross the strip across the width. These openings took an iron pin or bar, as iron corrosion or st…
Created on: Tuesday 11th May 2010
Last updated: Wednesday 22nd September 2010
Spatial data recorded. This findspot is known as 'Holywell Cum Needingworth Area', grid reference and parish protected.

Record ID: LIN-97AA16
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy biface coin weight of Nicholas du Mont, Antwerp, c.1581 AD. The weight is flat, and square in shape. The front face depicts a figure enthroned holding a sceptre and an orb, all within an inner circle of pellets. The reverse face depicts a hand within a circle of ?squares, the letters N M are visible either side of the hand and represent the maker's initials of Nicholas du Mont of Antwerp (Withers and Withers, 1995: 61). It is from the Low Countries and was possibly used to weigh fractions of a Lion or Ducat (see Withers and Withers, 1995: 39, 72).
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded.

Record ID: NLM-97A8D8
Object type: THIMBLE
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy. Thimble. Conical flat- topped sheet metal with closely spaced possibly hand punched indentations around the sides only. A basal foot-ring is followed by possibly rouletted circumferential decoration. Slightly compressed. Suggested date: Modern: 1850-1900. Height: 25mm, Diameter: (estimated): 18mm, Thickness of wall: 0.65mm, Weight: 5.1gms.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 22nd June 2010
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: BH-97A897
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy nummus of Constantine I, Constantine II, Constantius II or Constans; GLORIA EXERCITVS (one standard) reverse, minted AD 335-341. Measures 14.3mm in diameter, 1.6mm thick and weighs 1.44g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded. This findspot is known as 'Much Hadham', grid reference and parish protected.

Record ID: SWYOR-97A5C1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A copper alloy post medieval token from the Isle of Wight for half a penny, dated 1664. It has a diameter of 19.08mm, thickness 1.52mm, weight 1.43g. Other similar privately issued tokens can be seen in Fletcher 2003.Tokens and Tallies through the Ages p.40-43.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 4th September 2012
Spatial data recorded.

Record ID: ESS-97A3F2
Object type: COIN
Broad period: IRON AGE
County: Essex
Workflow stage: Awaiting validation
Iron Age gold coin: British Eastern uninscribed gold quarter stater of Dubnovellaunos, c 20 BC-AD 10. Van Arsdell VA1660 =BMC 2442=ABC 2395. This coin is also recorded as CCI 10.0874
Created on: Tuesday 11th May 2010
Last updated: Monday 24th October 2016
No spatial data available.

Record ID: NLM-979B07
Object type: VESSEL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Pottery Rimsherd. Pale sandy grey fabric; Greyware. The markedly flared rim of a wide bowl of estimated diameter 310mm. Though perhaps resembling a mortarium in its form, there is no trace of internal grit. Suggested date: Roman, 100-300. Sandra Firth kindly examined this sherd. Length: 97mm, Weight: 71.33gms.
Created on: Tuesday 11th May 2010
Last updated: Friday 20th November 2015
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: SUSS-979463
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Medeival trapezoidal strap slide of copper alloy with a separate internal rivet. Strap slides were used to hold down the loose end of the strap beyond the buckle. This example consists of a trapezoidal frame measuring 13.6mm by 14.5 mm with an internal minimum width (i.e. the strap size) of 10.9 mm. The seperate circular sectioned rivet has a wide flattened head on the end projectning into the slide and is riveted through the centre of the shortest side (lower edge). The lower edge is rectangular in section, the sides and upper edge are D shaped in section with flat inner sides. The o…
Created on: Tuesday 11th May 2010
Last updated: Thursday 13th May 2010
Spatial data recorded. This findspot is known as 'Alfriston', grid reference and parish protected.

Record ID: BH-9793E6
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A heavily worn and corroded copper-alloy nummus of The House of Valentinian; SECVRITAS REIPVBLICAE reverse, minted AD 364-378. Measures 16.9mm in diameter, 1.6mm thick and weighs 2.15g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 11th May 2010
Spatial data recorded. This findspot is known as 'Much Hadham', grid reference and parish protected.

• 

  Image not taken

Record ID: NLM-978E05
Object type: COIN
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy Coin. Farthing (finder's identification), George III (1760-1801) (cf. Spink 2004 no. 3775); very worn. Possibly first issue of 1771-1775. Reverse description: Britannia left on flat plinth, indistinct date in exergue. All other detail lost. Diameter: 22.08mm, Weight: 2.96gms.
Created on: Tuesday 11th May 2010
Last updated: Wednesday 9th January 2013
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: SWYOR-978BB3
Object type: BROOCH
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A small copper alloy probable annular brooch dating from the Post medieval period. It is a rounded oval in plan with transverse grooves and oval depressions alternately decorating the front face. The pin is missing and small traces of a white metal coating survive on the reverse. It has a diameter of 20.34mm, thickness 1.73mm, weight 0.93g.
Created on: Tuesday 11th May 2010
Last updated: Tuesday 4th September 2012
Spatial data recorded.