Record ID: SWYOR-C06AC0
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Fragment of a copper alloy Roman rosette or thistle brooch. This style of brooch developed from the earlier Langton Down style and dates to the first century. Part of the cylinder shaped wings survive, which would have originally housed the spring-pin mechanism. The top part of the bow also survives; this is flat with grooves and ribs (sometimes known as reeding) running vertically down it's front surface. At the end of this part, the bow curves round at a right angle and would have originally been attached to a circular or lozenge shaped plate. Similar examples can be seen in Hattatt…
Created on: Friday 25th June 2004
Last updated: Thursday 21st January 2021
Spatial data recorded. This findspot is known as 'North Dalton', grid reference and parish protected.

• 

  Image not taken

Record ID: LIN-BF1268
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Created on: Friday 25th June 2004
Last updated: Monday 23rd November 2020
Spatial data recorded.

Record ID: KENT-BDD141
Object type: COIN
Broad period: ROMAN
County: Kent
Workflow stage: Published
A Roman silver denarius of Hadrian (AD 117-138), dating to the period c.AD 134-138 (Reece Period 6). RESTITVTORI GALLIAE reverse type showing Hadrian standing right raising a kneeling figure of Gaul facing left. RIC II, p. 377, no. 324
Created on: Friday 25th June 2004
Last updated: Sunday 3rd May 2020
Spatial data recorded. This findspot is known as 'Sheldwich', grid reference and parish protected.

Record ID: SF-C27BD1
Object type: KEY (LOCKING)
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete early-medieval copper-alloy key. The bow is incomplete due to an old break but appears to have been circular. The stem is cylindrical, measuring 19mm in length; it is solid but bored to be hollow at the end. It has two pairs of circumferential grooves around it. The bit is worn and projects at right angles from the underside of the end of the stem; it is rectangular, measuring 17mm in length and 10mm in width. It has two rectangular projections projecting at right angles from its terminal end, giving an L-section. These are worn. This key is most likely to be 9th to 11…
Created on: Friday 25th June 2004
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Sutton', grid reference and parish protected.

Record ID: CORN-C9D303
Object type: PURSE
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Published
Copper-alloy purse bar of LMMC type A1, with an oval suspension loop and a central block in the shape of a shield. There are two incised lines in the shape of a cross on one side of the central block, but this pattern has been disrupted by an oval casting flaw. The central block is drilled and fitted with a swivelling oval loop which is lozenge-shaped in cross-section; the top of the loop has fractured and there is about 1 mm of the metal missing. There is a moulded, stylised, zoomorphic head to either side of the central block, gripping the side arms, which are circular in cross-sect…
Created on: Saturday 26th June 2004
Last updated: Thursday 8th November 2018
Spatial data recorded.

Record ID: SF-C21EE3
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy middle to late Anglo-Saxon ansate or caterpillar brooch of Weetch's type XI.D. One terminal and part of the bow of this brooch survives the rest is now missing due to an old break. It is rectangular in shape and measures 28mm in surviving length and 15mm in width. The surviving terminal flares outwards slightly towards its tip and has corroded iron through and around its centre, this could be the remains of an iron pin loop or catch plate of some sort. The front face of the brooch is decorated with ring-and-dot motifs, at the terminal end these are arranged …
Created on: Friday 25th June 2004
Last updated: Wednesday 31st October 2018
Spatial data recorded. This findspot is known as 'Sutton', grid reference and parish protected.

Record ID: SOMDOR-C32EA3
Object type: COSMETIC MORTAR
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
Fragment of a copper-alloy cosmetic grinder of Roman date. The surviving portion is one end of a cosmetic grinder with a suspension loop. The loop is large and circular with a break in the edge. There is a small curved projection in front of the loop on the underside of the grinder. Viewed from above the grinder flares out and has a recess in the upper surface. It has a U-shaped cross-section. The projection curves slightly back towards the loop and tapers to a point. Dimensions: 24.01mm by 11.37mm by 6.77mm. Weight: 3.41g.
Created on: Friday 25th June 2004
Last updated: Saturday 11th February 2017
Spatial data recorded. This findspot is known as 'Huish Episcopi', grid reference and parish protected.

• 

  Image not taken

Record ID: SOMDOR-BFC6D2
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation
Roman copper-alloy nummus of Constantius II dating from the period AD 348-50 (Reece period 18). FEL TEP REPARATIO reverse type depicting a soldier advancing right, leading a figure from a hut. Mint uncertain. The reverse appears to be off-struck.
Created on: Friday 25th June 2004
Last updated: Saturday 15th October 2016
No spatial data available.

Record ID: SUSS-C0E215
Object type: SCABBARD
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy scabbard chape with a knop terminal. The front plate of the chape is complete but the entire reverse is missing. The front plate of the chape consists of four decorated sections. The opening has been decorated with four crenellations, which are themselves decorated with transverse lines. Below this section there is a band, which has been decorated with a rope design. The next section down is rectangular and decorated with a series of punched holes; below this there is a band, which has also been decorated with a rope design. Below this there is an almost circular, …
Created on: Friday 25th June 2004
Last updated: Friday 16th September 2016
Spatial data recorded. This findspot is known as 'Dundridge', grid reference and parish protected.

Record ID: SUSS-C1F5A5
Object type: SCABBARD
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy two-piece scabbard chape with a knop terminal and openwork design. The front plate of the chape is incomplete. Just over half of the chape is missing. The entire reverse is also missing. The chape survives in two pieces, the second piece is only a small fragment which can not be fitted back onto the main body of the chape. The front plate of the chape has a raised ridge running down the centre of the chape which divides the design of the chape into two symmetrical halves. The half, which survives, has a 'shaped' opening. Below this there is a circular hole, a rect…
Created on: Friday 25th June 2004
Last updated: Friday 16th September 2016
Spatial data recorded. This findspot is known as 'Dundridge', grid reference and parish protected.

• 

  Image not taken

Record ID: LIN-C173C1
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval silver farthing of Edward III of England Mint or issue place: London Category: English coin Edwardian type 1279 - 1377 Obverse description: Crowned facing bust Reverse description: Long cross, three pellets in angles Reverse inscription: CIVITAS LONDON
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C17DE4
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A silver penny of Henry III of England Category: English coin short and long cross period 1180 - 1278 Obverse description: Illegible Obverse inscription: Illegible Reverse description: Long cross, three pellets in angles Reverse inscription: CIVITAS [LONDON]
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C18744
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval silver cut halfpenny of Henry III of England Category: English coin short and long cross period 1180 - 1278 Obverse description: Crowned facing bust Obverse inscription: HEN[RICVS REX] III Reverse description: Long cross, three pellets in angles Reverse inscription: ]RIC[
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C1A593
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval silver penny of Henry III of England. Category: English coin short and long cross period 1180 - 1278 Obverse description: Crowned facing bust Obverse inscription: ]RICVS RE[ Reverse description: Short cross, quatrefoils in angles Reverse inscription: +F[
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C1B4C6
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval silver penny of Henry III of England Mint or issue place: York Category: English coin short and long cross period 1180 - 1278 Obverse description: Crowned facing bust Obverse inscription: HENRICVS REX ANGLIE Reverse description: Long cross, three pellets in angles Reverse inscription: CIVITAS EBORACI
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C1BF17
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval silver penny of Edward I of England. Mint or issue place: London Category: English coin Edwardian type 1279 - 1377 Obverse description: Crowned facing bust Obverse inscription: +EDW R ANGL DNS HYB Reverse description: Long cross, three pellets in angles Reverse inscription: CIVITAS LONDON
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C1CBA1
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval silver cut halfpenny of Henry III of England. Mint or issue place: London Category: English coin short and long cross period 1180 - 1278 Obverse description: Crowned facing bust Obverse inscription: [HEN]RICVS REX [ ] Reverse description: Long cross, three pellets in angles Reverse inscription: ]ON LVND
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C1D795
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval silver cut halfpenny of Henry II of England. Category: Coin of Norman and Early Plantagenet England 1066-1180 Obverse description: Crowned facing bust Obverse inscription: +HENR[ Reverse description: Short cross, crosslets in angles Reverse inscription: Illegible
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-C1E115
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A medieval silver penny of Henry IV of England. Mint or issue place: Durham Obverse description: Crowned facing bust Obverse inscription: Illegible Reverse description: Long cross, three pellets in angles Reverse inscription: CIVITAS DVNOLM
Created on: Friday 25th June 2004
Last updated: Thursday 1st September 2016
Spatial data recorded.

Record ID: KENT-BDF660
Object type: COIN
Broad period: ROMAN
County: Kent
Workflow stage: Published
Roman copper alloy Q-Radiate of Allectus (AD 293-6) (Reece Period 14), VIRTVS AVG, Galley right with mast, cabin, 7 or 8 crew and waves. Probably Mint of London, Q(L?). Need to confirm type and mint. This coin has been included in Sam Moorhead's corpus for RIC, and the record will be updated as necesary.
Created on: Friday 25th June 2004
Last updated: Tuesday 30th August 2016
Spatial data recorded. This findspot is known as 'Sheldwich', grid reference and parish protected.