Record ID: IOW-EAA701
Object type: BROOCH
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published
Incomplete cast copper alloy bow brooch which has old breaks. Length 41mm, width 16mm. Assuming that the brooch was symmetrical, the very thin bow, of which only the lower part survives, would have had four regularly spaced vertical flutes and a protruding lug at each lower side. The plain leg, which has a slightly concave profile at either side, narrows sharply and terminates with a moulded knob above which is a slender transverse rib. The majority of the catch-plate is intact. Patches of tinning are evident on the front of the brooch which is suffering from bronze disease.
Created on: Tuesday 28th October 2003
Last updated: Saturday 25th August 2012
Spatial data recorded. This findspot is known as 'Bembridge Parish', grid reference and parish protected.

Record ID: SUSS-EA7FE3
Object type: TOKEN
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Published
Medieval trade token, perhaps Eastern origin
Created on: Tuesday 28th October 2003
Last updated: Tuesday 3rd June 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-EA2217
Object type: COIN
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Published
Constantius II Augustus; Maiorina
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: SF-EA0E57
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Saham Toney', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-E9F342
Object type: COIN
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Published
Constantine II as Caesar; Mimmus as
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: SF-E9AEA6
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Published
An incomplete copper-alloy pin; the pinhead and most of the shaft survive. The terminal of the shaft is missing due to an old break. The pin head is biconical in shape with a flat tip. It measures 7.28mm at its widest point (its centre). The top half of the pinhead appears to have vertical incisions, although these are not clear. The bottom half has circular indentations; again, these are not parallel and are not clear. Where the head meets the shaft there is a collar. The shaft measures 19.5 mm in surviving length and 1.9 mm in width; it is circular in cross-section. This pin …
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Saham Toney', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-E9CAA4
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Published
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: SF-E992C7
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published
A complete copper-alloy mount. It is quatrefoil in shape and measures 17.24mm by 16.29mm in size. The front face of the quatrefoil is relief decorated with what may be a crown, however the decoration is very worn and not entirrely clear. A central protrusion projects from the centre of the back face of the quatrefoil, measuring 15.21mm in length and 3.70mm in width, it has a square cross-section and is curves to one side of the mount, its tip tapers and curves backwards at about a 45 degree angle. This mount is most likely to be medieval in date.
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Long Melford', grid reference and parish protected.

Record ID: SF-E97A75
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published
A complete copper-alloy decorative strap fitting. This strap fitting is rectangular in shape, measuring 21.42mm in length and 16.50mm in width. This strap fitting has five circular rivet holes, one near to each corner and one in the centre of the mount. The front face of the strap fitting is decorated with a relief standing bird in side profile, facing left. Its wings are folded and project almost vertically from its back, the front foot appears to be raised. The tail is long and curvilinear, it terminates in a fleur de lis. Faint traces of gilding can also be seen on the front f…
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Long Melford', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-E980C7
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Published
Recorded at the Hidden Treasure Finds Day at National Museums & Galleries of Wales.
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-E96E21
Object type: COIN
Broad period: IRON AGE
County: Hampshire
Workflow stage: Published
Recorded at the Hidden Treasure Finds Day at National Museums & Galleries of Wales.'Trinovantes' annonymous, but attributed to Tasciovaranus
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: SF-E94F47
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published
A complete copper-alloy composite strap end with a sheet spacer occupying its whole width, measuring 41.45mm in length and 10.89mm in width. This strap end is rectangular in shape, with rounded corners, it is waisted before the knop terminal, which is again rectangular in shape with a central waisting, the lower half of the knop has an additional sheet with three radiating grooves on its front face. There is a central rivet through the terminal which holds the sheet spacer and the additional sheet, with the radiating grooves in place. The front face of the strap end is decorated wit…
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Long Melford', grid reference and parish protected.

Record ID: NMGW-E948A6
Object type: COIN
Broad period: IRON AGE
County: Hampshire
Workflow stage: Published
Recorded at the Hidden Treasure Finds Day at National Museums & Galleries of Wales.'Dwotrgis' Plated stater
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-E8EC18
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Published
Fragmentary copper alloy sheet 39 x 43mm at widest part. The object has some original edge present but is so damaged it is imppossible to suggest an original shape. It does have one fixing hole present and you can just make out the shape of a keyhole on the left. Below the keyhole void is an oblong of cross hatching carved into its surface (some can just be made out above the void as well) and to the right is a triangluar shape with incised circles filling it. Therer are also traces iof lareg cicrles with a very small circle in the middle, two can be seen in between the lower decoratio…
Created on: Tuesday 28th October 2003
Last updated: Monday 21st March 2011
Spatial data recorded.

Record ID: NLM-E925C3
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'roxby', grid reference and parish protected.

Record ID: NLM-E91856
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'roxby', grid reference and parish protected.

Record ID: SF-E8ED38
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published
A complete copper-alloy horse harness pendant, measuring 30.34mm in length and 21.90mm in width. This pendant has a central suspension loop, which is at 90 degrees to the plane of the pendant. The pendant is roughly triangular in shape with rounded corners. On the front face faint traces of incised decoration can be seen, but the pattern is no longer at all clear due to wear. The front face is slightly convex and the back face slightly concave. This pendant is medieval in date.
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Long Melford', grid reference and parish protected.

Record ID: NCL-E8BE18
Object type: SWORD
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Published
Six fragments from at least two Late Bronze Age copper alloy swords. They appear to form part of a metalworkers' hoard. The swords have been deliberately broken into fragments so that they can be easily melted down. One fragment appears to have already been subjected to intense heat and is partially melted. There are two large pieces of sword blade. Both are lentoidal in section and have a pronounced line along each cutting edge. One fragment measures 100.78mm by 31.85mm and is a maximum of 6.29mm thick. The other is 104.2mm by 40.44mm and is a maximum of 6.73mm thick. Ther…
Created on: Tuesday 28th October 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: SF-E8C314
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Suffolk
Workflow stage: Published
The tip fragment of a bronze spearhead. Measuring 42.17mm in surviving length and 14.34mm in width, at the widest surviving point. This spearhead has been severly affected by invasive corrosion, no original edges survive and there is only about 70% of the surface surviving on one face and 20% on the other. The tip of the spearhead is missing. It has a prominent mid-rib with concave blade faces on either side. These blade faces have a medium brown patina. Elsewhere the spearhead is pale green in colour, due to corrosion products. This spearhead is middle or late Bronze Age in date, c150…
Created on: Tuesday 28th October 2003
Last updated: Tuesday 6th June 2023
Spatial data recorded. This findspot is known as 'Otley', grid reference and parish protected.

Record ID: NARC-E894A2
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Northamptonshire
Workflow stage: Published
A circular lead object, circular and flattish. 23mm in diameter. Fairly worn and the detail is difficult to discern, but grooves that radiate from the centre are evident. There is a bulge on the reverse. Originally recorded as a medieval brooch, the photograph of the front may show a raised centre to the front. It is hard to know if this is any kind of finished object, or if it is a piece of metalworking waste.
Created on: Tuesday 28th October 2003
Last updated: Monday 10th December 2018
Spatial data recorded.