Record ID: SUSS-D4FD42
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
Medieval cast copper alloy bar mount. The mount is rectangular with a raised ridge running down the centre, convex on the front and concave on tha back. One end is broken with both corners lost to old breaks; this end is probably complete but it could have continued into a loop or other terminal . There is a seperate copper alloy rivet in-situ near the complete end and a hole for a second about a quarter of the way along the lengh form the broken end. It is 18.9mm long, 6.2mm wide and 1.7mm thick excluding the rivet, 4.8mm including; it weighs 0.73 grams. A similar mount is illu…
Created on: Monday 26th July 2010
Last updated: Tuesday 27th July 2010
Spatial data recorded. This findspot is known as 'Redgrave', grid reference and parish protected.

Record ID: SUSS-A03856
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
Cast copper alloy sheet with seperate iron rivets. The sheet is sub-rectangular with cut outs from two adjacent corners leaving a tab between at one of the shorter ends; the cut outs start as curves then have steep angled sections before joining the long sides. One of these corners is bent over slightly and one of the opposite corners is lost to old damage. There are three corroded iron rivets through it, one in the centre of the tab and two parallel to the opposite short side. There are traces of cast decoration in the form of a long quatrefoil or lobed equal armed cross on the front…
Created on: Wednesday 24th March 2010
Last updated: Friday 26th March 2010
Spatial data recorded. This findspot is known as 'Redgrave', grid reference and parish protected.

Record ID: SUSS-A01574
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
Square copper alloy sheet mount with a domed front and concave back. It has a single corroded iron rivet through the centre, although slightly offcentre. It is 14.5mm long, 14.7mm wide, 4.2mm thick and weighs 1.23 grams. Such simple mounts are hard to date accurately but the use of a seperate rivet may suggest a Medieval date.
Created on: Wednesday 24th March 2010
Last updated: Friday 26th March 2010
Spatial data recorded. This findspot is known as 'Redgrave', grid reference and parish protected.

Record ID: SUSS-A00C31
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
Post Medieval cast copper-alloy mount of probable 16th or 17th century date. The mount takes the form of an elongated heart-shaped plate. Extending from the reverse are two integral spiked rivets, one near the centre of each end. The rivets have been bent over at 90 degrees projecting beyond the top and bottom of the plate. The mount measures 22.2mm long, 9.6mm wide and 1.1mm thick. The weight is 1.06g.
Created on: Wednesday 24th March 2010
Last updated: Thursday 25th March 2010
Spatial data recorded. This findspot is known as 'Redgrave', grid reference and parish protected.

Record ID: SUSS-9FA2E0
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
Cast copper alloy incomplete object, probably a mount. It is openwork in the form of three conjoined lozenges and broken stubs at the corners of two may suggest it was originally symetrical with four lozenges although this is not clear. The outer tip of the lozenge opposite the breaks is filled in and has the stub on an integral circular sectioned rivet on the back. It is 18.0mm long, 19.0mm wide, 1.4mm thick, 4.4mm thick including the rivet; it weighs 1.28 grams. The form and use of an integral rivet may suggest a Post Medieval date, c. 1500-1700 AD.
Created on: Wednesday 24th March 2010
Last updated: Friday 26th March 2010
Spatial data recorded. This findspot is known as 'Redgrave', grid reference and parish protected.