Record ID: SUSS-A42766
Object type: MOUNT
Broad period: ROMAN
County: Hampshire
Workflow stage: Published
An incomplete Roman copper alloy and millifiori enamelled stud of c.2nd - 3rd century AD date. The copper alloy plate is circular with champlevé enamelled decoration on the upper surface comprising an empty central circular recessed field surrounded by four concentric recessed rings containing incomplete millifiori enamel inlay. The plate cells and shank are integrally cast, and each field of decoration is contained within a copper alloy flat-topped rim flush with the enamel. In the very centre of the empty circular central field (19.63mm diameter) …
Created on: Monday 12th February 2024
Last updated: Tuesday 13th February 2024
Spatial data recorded.

Record ID: OXON-157123
Object type: MOUNT
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Published
Probable Roman (mid 1st to 3rd century) mount: the copper alloy mount is incomplete or fragmentary. The body of the mount is an oval shape with a truncated and broken terminal, and at the opposite edge there is a integral sub-rectangular plate. The plate is decorated with fine transverse grooves which have been interupted by a circular perforation or cell. On the reverse thiscircular perforation or cell has a stud protruding. Due to corrosion it is not clear whether the stud is integral or seperate to the mount. The stud has a wide circular shank and terminals with an integral fla…
Created on: Monday 5th February 2024
Last updated: Wednesday 7th February 2024
Spatial data recorded.

Record ID: OXON-A6C0ED
Object type: MOUNT
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Published
An incomplete cast copper alloy and enamel mount of Roman date, dating to c. AD 80-250. This consists of a flat plate which takes the shape of a sideways H. The horizontal sections are roughly trilobate at both ends, and each have large rectangular cells filled with enamel. Each of these rectangles is further decorated with three circular recesses, placed equidistantly, one next to the other. At the middle of the central rectangular panel is a circular hole which is now filled with ferrous corrosion. On the back are two integral rivets or brackets, each in the form of a T, a…
Created on: Friday 19th January 2024
Last updated: Wednesday 7th February 2024
Spatial data recorded.

Record ID: NMS-A52A1D
Object type: MOUNT
Broad period: ROMAN
County: Norfolk
Workflow stage: Published
Description: Fragment of a small gilded silver flat openwork mount, probably Roman in date, perhaps a rectangular fitting for belt or strap. It is sharply rectangular in cross-section, with parallel, straight sides and both ends broken. Two triangular apertures are present, along with one crescentic, and part of another. The reserved bars have a scrolly appearance, ending in roundels. No means of attachment has survived. One break is recent but the other is not, being covered in a ferrous deposit that has afflicted many metal objects on this site. Patches …
Created on: Sunday 19th November 2023
Last updated: Thursday 14th March 2024
Spatial data recorded. This findspot is known as 'West Norfolk', grid reference and parish protected.

Record ID: LIN-B9DA1F
Object type: MOUNT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
A complete, cast copper-alloy military harness mount. The mount is square with a median rib. This rib is flanked on both sides by a convex panel. The sides of the mount form a narrow ledge. On the recessed reverse is an integral rivet with a disc head. This mount belongs to Nicolay's (2007), Type B6, pl. 73, no. 142.1. A parallel from the same parish is recorded as LIN-A9C66E. Suggested date: c.AD 120 - 300.
Created on: Wednesday 8th November 2023
Last updated: Monday 22nd January 2024
Spatial data recorded.

Record ID: LIN-B97B7C
Object type: MOUNT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Roman copper-alloy mount with integral rivet. The head is conical and undecorated, measuring 16mm in diameter. On the reverse an integral rivet projects from the centre. Its circular-section shaft is 4.6mm in minimum diameter and ends in a large integrally cast disc 12mm in diameter. The object is 11mm in total height. It has a pale green surface and weighs 4.8g.  The integral rivet with large flat rove is characteristic of the Roman period. The conical shape is paralleled at NMS-130954, SF-3ED7A5, HAMP-985260, NMS-5E0E99, NMS-728415, etc. A similar …
Created on: Wednesday 8th November 2023
Last updated: Monday 22nd January 2024
Spatial data recorded.

Record ID: LIN-B944B7
Object type: MOUNT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
A copper alloy mount or stud of probable Roman date. The stud has a flat circular body with an integral shank of circular section extending from the underside. The shank is incomplete. The front face of the stud is smooth and was possibly coated with white metal.
Created on: Wednesday 8th November 2023
Last updated: Monday 22nd January 2024
Spatial data recorded.

Record ID: LIN-B937F2
Object type: MOUNT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
A copper alloy mount or stud of probable Roman date. The stud has a flat circular body with a recesed perimeter ledge. The ledge is decorated with notches. An integral shank of circular section extends from the underside. 
Created on: Wednesday 8th November 2023
Last updated: Monday 22nd January 2024
Spatial data recorded.

Record ID: OXON-AADE70
Object type: MOUNT
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Published
An incomplete cast copper alloy anthropomorphic socketed terminal fitting of late Iron Age to early Roman date although an Early Medieval date may also be possible. The object is hollow and moulded into the form of a human head and neck. This has long hair with incised vertical lines giving the impression of strands. A projecting nose and chin and recessed cells for eyes beneath a prominent eye brow ridge. A subtle downturned mouth is present as an incised line beneath the nose. At the base of the neck are the remains of two attachment loops. The left (when seen from the front) i…
Created on: Tuesday 27th June 2023
Last updated: Friday 5th January 2024
Spatial data recorded. This findspot is known as 'Checkendon CP', grid reference and parish protected.

Record ID: SUSS-98B1F6
Object type: MOUNT
Broad period: ROMAN
County: West Sussex
Workflow stage: Published
An incomplete Roman copper-alloy millefiori enamelled object probably a mount or stud  of c. 2nd - 3rd century AD date. Only the circular plate survives and the reverse is plain with no evidence for an attachment.The upper surface of the plate is cast with an outer raised flat topped rim, (1.41mm wide); and an inner raised flat topped border (1.35mm wide); together forming an annular recess 2.76mm wide.  Within the recess are small fragments of red glass millefiori decoration set in bands with one fragment of blue glass remaining. The …
Created on: Monday 26th June 2023
Last updated: Tuesday 18th July 2023
Spatial data recorded.

Record ID: LVPL-21D3F6
Object type: MOUNT
Broad period: ROMAN
County: Norfolk
Workflow stage: Published
A complete copper alloy phallic mount of Roman date (c.AD 43-200).  The object is convex and 'T-shaped' in plan, the phallus itself being triangular in cross-section and its straight sides gradually converging towards the raised, moulded tip. At the other end, the testicles in the form of two lobed knops project at a right angle from either side of the phallus. The reverse is concave, with a single circular stud at the centre. Length: 25.0mm.  Width: 20.8mm. Thickness: 8.4mm.  Weight:4.66g Phallic amulets were likely worn as good luck charms, and had a m…
Created on: Wednesday 3rd May 2023
Last updated: Tuesday 5th September 2023
Spatial data recorded. This findspot is known as 'Sporle with Palgrave', grid reference and parish protected.

Record ID: LIN-AC27C1
Object type: MOUNT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Large Roman copper-alloy mount with integral rivet. The front is conical and the sides are slightly concave in side view, and rise from a circular edge 25mm in diameter to a rounded point. The reverse is hollow, and the integral rivet projects from the centre. Its circular-section shaft is 4.6mm in minimum diameter and ends in a large integrally cast disc 12mm in diameter. The object is 16mm in total height with the front and the rivet each making up about half of this. It has a pale green surface and weighs 8.7g.  The integral rivet with large flat rove is characterist…
Created on: Monday 3rd April 2023
Last updated: Friday 12th May 2023
Spatial data recorded.

Record ID: SUSS-2A58BC
Object type: MOUNT
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Published
An incomplete silver decorative mount of late Medieval to Post Medieval date in the form of a pair of stag heads. The mount is cast in moulded high relief in the form of a pair of forward facing conjoined stag heads, linked at the antlers. The heads are angled outwards slightly. The conjoined antlers are complete but the two adjacent antlers are missing, with worn breaks. The surviving antlers are bifurcated with two branches and a circular rivet hole below the point where they meet. The stag heads are triangular with flattened oval ears with central hollows; …
Created on: Tuesday 28th March 2023
Last updated: Thursday 9th November 2023
Spatial data recorded. This findspot is known as 'Near Petersfield', grid reference and parish protected.

Record ID: SF-3A4648
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Published
Description: An incomplete Early Medieval copper-alloy, iron, gold and garnet pyramid mount strap fitting from a scabbard or sword-belt. The object is a four-sided, truncated pyramid-shape with a flattened apex within which a sub-square garnet is set measuring roughly 4.1mm x 4.0mm. Each side is decorated a raised linear border along the sides and lower edge creating a recessed field in the centre. Each of these is decorated with inlaid beaded wire filigree decoration consisting of two alternating patterns (meaning that the patterns are the same on opposite sides), each feature …
Created on: Friday 27th January 2023
Last updated: Thursday 9th November 2023
Spatial data recorded. This findspot is known as 'Bardwell', grid reference and parish protected.

Record ID: LIN-B437A2
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Treasure Case 2022 T1139 A cast silver medieval to post-medieval silver mount or badge dating to c.AD 1279-1400. The mount comprises a flat silver plate in the form of a quatrefoil with four equidistant angular projections along each concave length. A bust of a crowned head is depicted on the front, surrounded by a raised border. The bust is in the style of medieval king with a trifoliate crown with a curved band, pointed ornament and a central lozenge-shaped fleur. The crowned head has a narrow face with incised lozenge-shaped eyes, a wedge-shaped nose, down…
Created on: Monday 21st November 2022
Last updated: Monday 26th June 2023
Spatial data recorded. This findspot is known as 'Near Fulletby', grid reference and parish protected.

Record ID: HAMP-B9F8D5
Object type: MOUNT
Broad period: ROMAN
County: Kent
Workflow stage: Published
 Roman (AD100-300) copper alloy pelta -shaped mount with a pinched crest. The front of the mount is convex and undecorated. The reverse of the mount is concave and has two large integral circular-sectioned footed rivets for strap attachment. 
Created on: Wednesday 9th November 2022
Last updated: Saturday 10th December 2022
Spatial data recorded.

Record ID: NARC-BF0DEA
Object type: MOUNT
Broad period: MEDIEVAL
Workflow stage: Published
An incomplete silver Mount of Medieval date (AD 1200-1450). The object is composed of a thin sheet of silver, sub-circular in plan and domed in section. The object has two sub-circular perforations within the domed portion. The remainder of the upper surface is decorated with repeating lines of pellets in relief. The lower edges are abraded. Diameter: 5.57mm, Thickness: 0.40mm Weight: 0.09g
Created on: Friday 28th October 2022
Last updated: Friday 13th October 2023
No spatial data available.

Record ID: CORN-92FD03
Object type: MOUNT
Broad period: ROMAN
County: Somerset
Workflow stage: Published
An incomplete Roman copper alloy and millifiori enamelled stud of c. 2nd - 3rd century AD date. The mount is circular in plan and flat with raised concentric ring decoration around central raised circle. The face of the brooch has the remains of millefiori enamelling. The mosaic style decoration consists of rows of alternating blue and white chequerboard panels, mainly seen in the central circle and larger square blue and white chequerboard panels within a red border. The back of the object is undecorated and has a single, solid, cylindrical, tapering stud in …
Created on: Wednesday 26th October 2022
Last updated: Thursday 19th January 2023
Spatial data recorded.

Record ID: PAS-25D833
Object type: MOUNT
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Published
Cast gold plate terminal, mount or fitting probably originating from from a larger object. The object is broadly trapezoidal in plan with rounded edges, consisting a decorated front plate that overhangs a rectangular box-like fitting attached to the back of the object. To this in turn is soldered the remains of a thin gold strip, possibly reflecting some sort of hoop or broken suspension loop. The front of the object is decorated in moulded relief, though it is uncertain whether this is vegetal or anthropomorphic in nature. A vertical line extends from a rounded knop at one end of the …
Created on: Friday 21st October 2022
Last updated: Thursday 19th January 2023
Spatial data recorded.

Record ID: YORYM-FE20C2
Object type: MOUNT
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published
An incomplete copper-alloy ithyphallic mount of Roman date, c.AD 43 – 410. Parker IM Type 1. The mount is broadly T-shaped with a D-shaped section. The straight sides of the shaft taper slightly, gradually converging towards the raised, moulded tip. At the top, the testicles project at right angles from either side of the shaft. In each case an oblique raised ridge separates the rounded moulding from the phallus. The reverse of the shaft has a semi-circular groove. At either end of this groove is an integrally cast, circular-sectioned rivet. Both rivets taper and terminat…
Created on: Wednesday 19th October 2022
Last updated: Thursday 19th January 2023
Spatial data recorded. This findspot is known as 'Londesborough Area', grid reference and parish protected.