Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • Show this many records per page: 40
    • Institution: NLM
    • Sort: institution
    • County: York

  • Image not taken

Record ID: NLM7072
Object type: SLIDE KEY
Broad period: EARLY MEDIEVAL
County: York
Workflow stage: Published Find published
Hexagonal shank, looped handle at the top, most of it is broken away. Collared ‘D’ shaped bit with the curved section attached to the shank, crown on the terminal side of the bit.
Created on: Monday 3rd March 2003
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'NABURN', grid reference and parish protected.


  • Thumbnail image of NLM-1A6B06

Record ID: NLM-1A6B06
Object type: BUCKLE
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy Medieval annular buckle. The circular buckle frame is slight concave at the back and flat on the front. Wrapped around the central integral bar is copper alloy sheet pin. Cast integrally with the ring, on one side of the frame, is a ‘D’ sectioned bar with a small hemispherical terminal. The diameter is 25.9mm, the thickness is 2.3mm, the length of the bar is 13.9mm and the weight is 4.87g.
Created on: Thursday 31st January 2008
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NLM-1A1FC3

Record ID: NLM-1A1FC3
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A complete Post Medieval cast copper alloy Hooked Tag. The openwork leaf-shaped plate is decorated with a pattern of curved volutes. The object is laterally symmetrical. One end has been curved around to form a board hook; at the other end there may be the remains of a broken loop. The length is 24.6mm, the width is 18.5mm, the thickness is 1.8mm and the weight is 2.57g.
Created on: Thursday 31st January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NLM-CA8D41

Record ID: NLM-CA8D41
Object type: COIN
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Possibly a fragment of a Post Medieval halfgroat of Charles I, c. 1625-1649. The coin has been cut and only the centre remains.
Created on: Thursday 3rd January 2008
Last updated: Thursday 24th February 2011
No spatial data available.


  • Image not taken

Record ID: NLM7018
Object type: CAULDRON
Broad period: EARLY MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Circular with inner circle that would have held a decorative stone, four arms radiating for this circle that forms a cross, four squares at each end of cross arms that would have held enamel, interlace and scroll work in all four sections. Raised border on both the internal and external circle.
Created on: Wednesday 5th February 2003
Last updated: Tuesday 4th March 2014
Spatial data recorded. This findspot is known as 'Yorkshire', grid reference and parish protected.


  • Thumbnail image of NLM-A2EDA0

Record ID: NLM-A2EDA0
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman nummus of Constantine I, c.330-335.
Created on: Monday 10th October 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Strensall', grid reference and parish protected.


  • Thumbnail image of NLM-A2BB17

Record ID: NLM-A2BB17
Object type: COIN
Broad period: MEDIEVAL
County: York
Workflow stage: Published Find published
A broken and incomplete voided long cross of Henry III, Class 3, c.1248-50 AD.
Created on: Monday 10th October 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Strensall', grid reference and parish protected.


  • Thumbnail image of NLM-E16C27

Record ID: NLM-E16C27
Object type: FINGER RING
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy Late Medieval Signet Finger Ring. The D-section hoop is slightly misshapen at the base and has scratch marks all around. One of the shoulders is faceted but the other has been worn flat and smooth. The octagonal shaped bezel has a seal device in the form of an initial letter ‘I’, possibly with a crown on top and a three-stemmed palm either side. The device is a probably a merchants or traders mark and the letter probably refers to the Christian name of the owner; the ‘I’ is used for John. The length of the ring is 26.0mm, the length of the bezel is …
Created on: Tuesday 24th October 2006
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NLM-E1ACC1

Record ID: NLM-E1ACC1
Object type: MOUNT
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy Mount, probably of Medieval date. The flat mount is D-shaped in section and has two conjoined circles with circular apertures. The mount is waisted waisted at one side of the circles and then splits into two pointed terminals. There is an iron rivet through the centre of the waisted section and on each of the points of the terminal. The length is 17.9mm, the width is 19.4mm, the thickness is 2.8mm and the weight is 2.30g.
Created on: Tuesday 24th October 2006
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NLM-E131A5

Record ID: NLM-E131A5
Object type: MOUNT
Broad period: ROMAN
County: York
Workflow stage: Published Find published
A complete cast copper-alloy Roman mount. The three- dimension mount is in the form of an anthromorphic bust, probably depicting Medusa. The face is quite worn but the sunken eyes, rounded nose and pressed lips are still visible. Her hair is wavy and chin length and she has a triangular protrusion at the front of her head. The reverse of the mount is hollow with a circular sectioned rivet protruding from the centre. The length of the mount is 31.4mm, the width is 29.2mm, the thickness is 16.1mm and the weight is 14.71g.
Created on: Tuesday 24th October 2006
Last updated: Tuesday 1st March 2016
No spatial data available.


  • Thumbnail image of NLM-018584

Record ID: NLM-018584
Object type: BLADE
Broad period: NEOLITHIC
County: York
Workflow stage: Awaiting validation Find awaiting validation
Pale buff patinated flint. Blade fragment, with retouch at one end, and saw-tooth reworking along one edge. Suggested date: Neolithic. Measurements from drawing only. Length: 27mm, Width: 17mm, Max Thickness: 8mm. Finder could only give approximate location, to Naburn, near York, asserting the object had been found by a friend
Created on: Tuesday 3rd November 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Naburn', grid reference and parish protected.


  • Thumbnail image of NLM-BD7407

Record ID: NLM-BD7407
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Awaiting validation Find awaiting validation
Silver coin. Denarius of Trajan (98-117), as kindly identified by the finder who suggests it to be an issue of the mint of Rome 112-114, celebrating the completion of a road. Robustly cleaned by the finder. Sear vol. 2 no. 3173, citing RIC vol. 2 no. 266 Obverse description: Bust laureate right. Obverse inscription: IMP TRAIANO AVG CO[----] Reverse description: Figure reclining right but looking left holding an eight-spoked wheel; subsidiary legend in a broad exergue. Reverse inscription: [---]O OPTIMO PRINCIPI[O] In exergue: VIA TRAIANA Diameter: 19mm, Weight: 2.00…
Created on: Wednesday 29th March 2017
Last updated: Monday 3rd April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-12C7C2

Record ID: NLM-12C7C2
Object type: BUTTON
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead alloy button. Cast plano-convex section plain button with marks on the back suggesting the loss of a separate drawn wire loop; bearing a high polish. Suggested date: Late Medieval, 1350-1550. Diameter: 11.3mm, Thickness: 6.5mm, Weight: 3.37gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-12B516

Record ID: NLM-12B516
Object type: WEIGHT
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead and iron weight. Cast flat-based plano-convex weight of rounded sub-pentagonal form with the rusted remains of a suspension chain lying across its upper surface; an irregularity in the flat base may indicate the other end of the embedded chain. Patinated. The mass may suggest this to have represented one averdepois pound [of 454 gms]. Suggested date: Late Medieval, 1350-1550. Diameter: 52.8mm, Thickness (overall): 28.4mm, Weight: c.435gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-13A05B

Record ID: NLM-13A05B
Object type: STYLUS
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead possible stylus. A cast rod of square section, crimped at one end and pulled to a four sided tapered point at the other; patinated, and now bent at its end. This may be a writing or marking implement made from lead scrap, and quite possibly only for use on, for example, a building site where such waste might be available (Foreman, M. 1991, 'The lead and lead alloy', in Armstrong, P. et al, Excavations at Lurk Lane, Beverley 1979-82, Sheffield Excavation Reports 1, John Collis, Sheffield, pages 155-163). Suggested date: Late Medieval, 1350-1500. Length: 49mm, Thickness: 7.1mm, …
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-12AD1E

Record ID: NLM-12AD1E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buckle. Cast fragment from a buckle frame of rounded section with its [probably] end expanded in thickness. Suggested date: Post-Medieval, 1720-1790. Length: 42.3mm, Thickness: 6.9mm, Weight: 5.63gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-12E3DC

Record ID: NLM-12E3DC
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buttons. Two small flat discoid buttons: one with a flat plain front and a boss on the back for its loop [lost]; and one black painted with a drawn wire loop flat against the back. Suggested date: Post-Medieval, 1850-1900. Combined Weight: 2.84gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-12DC0C

Record ID: NLM-12DC0C
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button. Composite hollow three piece uniform button bearing the Royal arms on its die stamped front,, and with maker's details as a back stamp: FIRMIN & SONS LONDON. A drawn wire loop passes into the back plate. Suggested date: Post-Medieval, 1850-1900. Diameter: 24mm, Thickness (clear of loop): 7.7mm, Weight: 5.26gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-12D0C9

Record ID: NLM-12D0C9
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button fragment. Cast plano-convex section button with moulded decoration front comprising an eight rayed or petalled boss; a circular scar on the back may indicate the loss of an integrally cast loop; rusted iron is concreted on one side might alternatively suggest a loop of another material. Suggested date: Post-Medieval, 1500-1650. Diameter: 14.2mm, Thickness: 5.9mm, Weight: 3.29gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-138D25

Record ID: NLM-138D25
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button fragment. Concavo-convex button front with the stubs of an attached loop; covered in white concretion, possibly burned. Suggested date: Post-Medieval, 1850-1900. Diameter: 21.5mm, Height: 4.3mm, Weight: 2.05gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-13D21C

Record ID: NLM-13D21C
Object type: MUSKET
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy possible musket fragment. A symmetrical pair of cast copper alloy plates with moulded decorative detail, resembling a leaf or wing in their form, brazed to and linked at their upper ends by a round section open loop, and at their lower ends brazed to and linked by the square section arms of a Y-shaped object with a round section screw threaded shank below it. Possibly from the mechanism of a muzzle loading gun; the loops and Y shaped object appear aptly sized to permit a gun barrel to pass through or between them. It is, however, uncertain whether the current orientation …
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-128334

Record ID: NLM-128334
Object type: INGOT
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead ingot. Cast pear shaped ingot, lightly patinated. Made by pouring molten lead into a small bowl-shaped scrape. Suggested date: Post-Medieval, 1500-1800. Length: 60.6mm, Width: 37.7mm, Thickness: 15.6mm, Weight: 158.89gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-129A3A

Record ID: NLM-129A3A
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead possible weight. A lump of thick cast sheet bent and hammered to an irregular five-sided form with edges and sides flattened. Lightly patinated. The mass may suggest this to have been a weight improvised from scrap, representing one averdepois ounce. The good surface condition may suggest a relatively recent date; the surface appears smoothed from wear while in use. Suggested date: Post-Medieval, 1500-1700. Length: 20mm, Width: 17.1mm, Thickness: 10.8mm, Weight: 27.61gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-12BCF7

Record ID: NLM-12BCF7
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead possible weight. A fragment of thick cast sheet bent and hammered to form a small irregular rhomboid lump. Lightly patinated. The mass, at just over one averdepois ounce, might suggest use as an improvised weight. A larger example of similar form (NLM-129A3A) was reported along with this object. Suggested date: Post-Medieval, 1500-1700. Length: 12.6mm, Width: 11.7mm, Thickness: 9.3mm, Weight: 8.02gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-12A52A

Record ID: NLM-12A52A
Object type: TOY
Broad period: MODERN
County: York
Workflow stage: Awaiting validation Find awaiting validation
Modern toy fragment. Hollow-cast spoked wheel with tyre, and with part of one end of a motorcycle above it - it is uncertain whether a back or front wheel is represented. Modelled at a scale of 1:32 or 54mm. Melted on one side, presumably from its inclusion in a bonfire. Suggested date: Modern, 1910-1960. Height: 37mm, Length: 32mm, Thickness (overall): 5.0mm, Weight: 18.97gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Elvington', grid reference and parish protected.


  • Thumbnail image of NLM-26B7C2

Record ID: NLM-26B7C2
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy seal matrix. Cast discoid matrix with engraved face and the stubs of a suspension loop at the end of a low rib on the back. The central motif may represent a quadruped, or possibly a hanging fleece; other figurative schemes might be suggested. The worn circumferential legend defies interpretation, but appears to include: [--]D [-] O V [-] E C R. Abraded. Suggested date: Medieval, 1250-1350. Diameter: 22.4mm, Thickness (clear of handle and rib): 2.1mm, Weight: 5.91gms
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-13AF73

Record ID: NLM-13AF73
Object type: MOUNT
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy mount. Cast rectangular plate with bevelled edges and with an integrally cast square section fixing pin set centrally on the back, which is lightly hollowed. Suggested date: Post-Medieval, 1600-1700. Length: 13.7mm, Width: 12.9mm, Thickness (clear of fixing pin): 1.5mm, Weight: 2.43gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-13DB96

Record ID: NLM-13DB96
Object type: CANDLE HOLDER
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy and lead candle holder. Cast vase-shaped holder with fluted body with curvilinear mouldings around its expanded top. A stepped rim surrounds a lead lined aperture of diameter 17.3mm. Grey metal also appears on the base of the object, as a flat plate with central rounded protrusion, which presumably met a further element here. The style is broadly Neo-Classical, which may indicate a later post-medieval date. Suggested date: Post-Medieval, 1750-1850. Height: 42mm, Diameter: 26.2mm, Weight: 66.11gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-13E316

Record ID: NLM-13E316
Object type: SHOT
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead shot. Cast ball; patinated. The mass may suggest this to have been for use with a light fowling piece or 'rook and rabbit' gun. Suggested date: Post-Medieval, 1700-1800. Diameter: 11.3mm, Weight: 7.06gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-13EB8C

Record ID: NLM-13EB8C
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button. Cast plano-convex one piece plain discoid button with integrally cast and drilled loop. Suggested date: Post-Medieval, 1600-1700. Diameter: 9.0mm, Height: 9.9mm, Weight: 1.46gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-13F527

Record ID: NLM-13F527
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button. Concavo-convex discoid uniform button. A probably die stamped front bears the motif of a grenade with flame issuing from its touch hole, signifying in a British context a Fusilier or Grenadier Regiment, or possibly an artillery unit. An unusual form of four-stranded sub-pyramidal loop appears set centrally in the concave back. Suggested date: post-Medieval, 1800-1900. Diameter: 16.9mm, Height (overall): 7.4mm, Weight: 2.42gms
Created on: Tuesday 21st March 2017
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-26C00D

Record ID: NLM-26C00D
Object type: SPOON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy possible spoon fragment. Cast baluster-shaped stem from a spoon, with a collar at one end and an expanded and tapered moulding at the other, broken beyond either site. Suggested date: Post-Medieval, 1650-1750. Length: 57.4mm, Diameter: 6.7mm, Weight: 9.52gms
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-269D67

Record ID: NLM-269D67
Object type: SOLDERING LAMP
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy possible soldering iron. Cast square section bar with a lightly waisted mid-part and expanded at either end. One, taken to be the working end, tapers to a four-sided point. The other end is curved around an aperture of diameter 8.9mm, part of a broken socket. This identification is offered following the lead of a commentator on another object of comparable form; this reporter would welcome better-informed comment on this object. Suggested date: Post-Medieval to Modern, 1850-1950. Length: 108.2mm, Thickness (at socketed end): 11.4mm, Weight: 56.33gms
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-26E0DD

Record ID: NLM-26E0DD
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button fragment. Probably die stamped flat discoid button with a low boss on the back for a loop [lost]. An incised radial design with a right hand spiral originates from central concentric lathe made rings at the centre of the front. Suggested date: Post-Medieval, 1750-1850. Diameter: 23.4mm, Thickness (clear of boss): 0.6mm, Weight: 2.45gms
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-26EF28

Record ID: NLM-26EF28
Object type: BUTTON
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buttons. Two buttons: one is flat discoid with a drawn wire loop in a boss on the back and possibly painted black on its front; the other is a concavo-convex front from a composite button with rust-impregnated material in its hollow back. Suggested date: Post-Medieval, 1850-1900. Combined Weight: 7.76gms
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-26E804

Record ID: NLM-26E804
Object type: SHOT
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Lead shot. Cast ball, with faint mould line; patinated. A flattened patch of diameter 7mm may represent the use of a ramrod or impact damage. The mass may suggest this to have been for use with a light fowling piece or 'rook and rabbit' gun. Suggested date: post-Medieval, 1700-1800. Diameter: 11.1mm, Weight: 7.57gms
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-26AD27

Record ID: NLM-26AD27
Object type: BUTTON
Broad period: MODERN
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button. Three piece hollow composite discoid uniform button, with a drawn wire loop threaded into its back. A die stamped button front bears the image of a cannon and rammer/sponge below an arched Crown Imperial. The image may suggest an artillery unit, though not necessarily the Royal Artillery, as the Regimental motto is omitted. A separate back plate bears a stamped maker's back mark: [---]& WRIGHT LIMITED.BIRMINGHAM. The button front retains traces of green paint, suggesting it was attached to a uniform of khaki drab. Suggested date: Modern, 1900-1920. Diameter: 22…
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM-26C987

Record ID: NLM-26C987
Object type: TAG
Broad period: MODERN
County: York
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy dog tag. Milled disc, at first sight retaining no features on either side. One side does bear a splash of white metal, possibly as molten spillage. A magnified view, however, reveals the end of a legend in lettering of modern unseriffed style on one side. Now bent. Suggested date: Modern, 1940-1980. Diameter: 18.4mm, Thickness: 0.6mm, Weight: 1.48gms
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Wheldrake', grid reference and parish protected.


  • Thumbnail image of NLM2718

Record ID: NLM2718
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Viking Borre style brooch of Jansson type II A, only two attachments on back; pin lug parallel to edge of brooch. Good condition, no pin. Three stylised animal heads.
Created on: Thursday 7th October 1999
Last updated: Wednesday 28th November 2018
Spatial data recorded. This findspot is known as 'HAMBLETON', grid reference and parish protected.


1 - 39 of 39 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.