Back to simple search | Back to advanced search

    You searched for:

    • Complete:Complete
    • Object type:GRAVER

  • Thumbnail image of CORN-302757

Record ID: CORN-302757
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
A flint graver, rhomboidal in plan, trapezoidal in profile and triangular in section. Made on a tertiary flake with no cortex remaining. On the dorsal face the remnant of the bulb of percussion is visible at the proximal end, together with a bulbar scar, although the point of percussion has been removed by subsequent removal of the striking platform. The scars of the removal of three earlier longitudinal flakes are visible on the ventral face. The resulting flake has been reworked around all of its edges: when viewed from the ventral side the right hand edge and the distal end have bo…
Created on: Tuesday 16th February 2016
Last updated: Tuesday 16th February 2016
Spatial data recorded.


  • Thumbnail image of CORN-815BF8

Record ID: CORN-815BF8
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Two flint gravers, sub-rectangular in plan, lozenge-shaped in profile, and triangular in section. On the larger graver, the dorsal face has been retouched at the distal end and along both margins, with the right margin worked more abruptly into a graver edge. There is a small patch of cortex on the dorsal face at the distal end and patches of iron staining on both faces. On the smaller graver, the ventral face has also been abruptly retouched along the left margin into a notched edge and along the right margin into a serrated edge. The flint is a mottled pale to mid grey colour, but w…
Created on: Friday 11th October 2013
Last updated: Tuesday 29th October 2013
Spatial data recorded.


  • Thumbnail image of LANCUM-149910

Record ID: LANCUM-149910
Object type: GRAVER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic worked translucent grey/brown flint graver/burin on a blade. An attempt has been made to remove 12mm of the dorsal ridge at the distal end with three removals. One large flake has removed most of the proximal end, leaving the point that could be used as a graver or burin. Dates to between c8300 and c3500 BC. The length is 36mm, width 9.5mm, thickness 5mm, and the weight is 1.5g.
Created on: Tuesday 5th February 2013
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'near Colne', grid reference and parish protected.


  • Thumbnail image of LIN-7DD5B1

Record ID: LIN-7DD5B1
Object type: GRAVER
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Published Find published
A flint graver or awl dating to the Neolithic or early Bronze Age. The flint is sub-triangular in plan with a pointed terminal, worked at both edges for use as a graver or an awl. The flint is mid-grey in colour with mottled patches of orange and brown.
Created on: Thursday 17th January 2013
Last updated: Wednesday 27th March 2013
Spatial data recorded. This findspot is known as 'Coleby', grid reference and parish protected.


  • Thumbnail image of PUBLIC-A22CE5

Record ID: PUBLIC-A22CE5
Object type: GRAVER
Broad period: NEOLITHIC
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A broad, thin soft hammer struck flake of brown and grey marbled nodular flint. The dorsal surface carries parallel flake and blade scars from the same direction as the major flake removal.The left margin is sharp and unmodified but for very slight use chipping or damage.The right margin has had a projection accentuated by a mesal notch worked in fine semi-abrupt retouch. The strong right angle shaped graver produced has had repetitive use with the tip ground and glossy and a streak of use gloss running from it on the ventral side.
Created on: Friday 7th September 2012
Last updated: Wednesday 26th February 2014
Spatial data recorded. This findspot is known as 'East Hoath woods', grid reference and parish protected.


  • Thumbnail image of LIN-3CB515

Record ID: LIN-3CB515
Object type: GRAVER
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A flint graver or awl from a tertiary flake. The flake is oval in plan and worked to a point. The flint is light grey.
Created on: Tuesday 21st February 2012
Last updated: Tuesday 21st February 2012
Spatial data recorded. This findspot is known as 'Nettleton', grid reference and parish protected.


  • Thumbnail image of PUBLIC-E888B1

Record ID: PUBLIC-E888B1
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Flint notched graver, rectangular in plan, trapezoidal in profile and pentagonal in section. Bulb on ventral face, with retouched notch on right edge. Uploaded image is profile view. The flint is light grey colour with lighter inclusions. Butler (2005) illustrates a similar example on page 131, Fig. 55, No. 4, which is dated to the Neolithic.
Created on: Tuesday 24th January 2012
Last updated: Wednesday 1st February 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-AAAFD2

Record ID: PUBLIC-AAAFD2
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Flint graver, crescent-shaped in plan and profile, and plano-convex in section. There is cortex along the distal edge. On the dorsal face the left margin has a broad, shallow indentation to allow its use as a graver. Along the indented edge is retouch, most noticeably on the ventral face. The flint is dark grey with pale mottling and secondary cortex; most likely it derived from a local beach pebble. It is most likely a graver but bears a resemblance to a scraper in Bond (2004) on page 184, Figure 75, Number 6.
Created on: Saturday 21st January 2012
Last updated: Sunday 29th January 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-A9C971

Record ID: PUBLIC-A9C971
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Flint graver, a reversed 'C' in plan, with primary cortex providing backing; it is noticeable that the patch of cortex towards the proximal end is far smoother, perhaps from use. The left margin is concave and worn. The flint is pale brown and is likely to have derived from a local beach pebble. It is most likely a graver. Bond (2004) shows a hollow scraper of similar appearance on page 184, Figure 75, Number 6, but this example is a graver, not a scraper.
Created on: Saturday 21st January 2012
Last updated: Sunday 29th January 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-2ADD17

Record ID: PUBLIC-2ADD17
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Chunky piece of flint which has been truncated at one end, the broad part of the flake. It has been worked along one edge which is oppposite the cortex; this worked edge looks like a chipped edge with some indentations which form the graver. The cortex acts as backing. The profile of the flake is concave. The flint is light grey in colour with shading to darker grey at one end and was likely derived from a local beach pebble. Butler [2005] illustrates a similar example on page 169, fig.71, No.8 which is dated to the later Neolithic.
Created on: Sunday 15th January 2012
Last updated: Wednesday 1st February 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-1C5C06

Record ID: PUBLIC-1C5C06
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Small flake, or chip, with one of the edges worked to form a shallow notch so could be called a graver. There is some cortex on the dorsal face which acts as backing and there is a flat area on the dorsal face below the notch. The ventral face is flat, not shaped. The flint is a light to mid grey colour with lighter grey splodges and was likely derived from a local beach pebble. Butler [2005] illustrates a similar example on page 131, fig. 55, No.5 which is dated to the early Neolithic.
Created on: Saturday 14th January 2012
Last updated: Wednesday 1st February 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-164757

Record ID: PUBLIC-164757
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Flint flake, sub-rectangular in plan, bi-convex in profile and section. On the dorsal face there is retouch along the distal edge, which also has a notch and a projection. The left margin also shows retouch. The proximal edge has removals that would have allowed the piece to have been held more comfortably. On the dorsal face a small patch of gloss can be seen on the projection. It is pale grey flint without cortex, so it is classed as tertiary.
Created on: Saturday 14th January 2012
Last updated: Sunday 29th January 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-15E1C3

Record ID: PUBLIC-15E1C3
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Large piece of cortex flake with a step facture across the middle which has neatly removed a chunk of the flint. The edges without cortex have been worked and a notch formed at the right angle in the flake caused by the step fracture. It could be described as a graver, or a notched flake. The other side, back, is flat. There is natural abrasion at end of the edge which has been trimmed. The flint is a light grey colour and was likely derived from a local beach pebble. Butler [2005] illustrates a similar example on page 131, fig. 5 , No.5 which is dated to the early Neolithic.
Created on: Saturday 14th January 2012
Last updated: Wednesday 1st February 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-1557B0

Record ID: PUBLIC-1557B0
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
A pointed blade of translucent black flint with the distal end sharpened by a burin strike to make a graver.There is abrasion on each convergent margin next to it. The rest of the lateral margins have slight retouch and use, particularly some semi-abrupt work around the lower right margin where it meets the proximal end.Butler(2005) illustrates a graver on page 131, fig 55, 7.
Created on: Saturday 14th January 2012
Last updated: Sunday 29th January 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-AE4314

Record ID: PUBLIC-AE4314
Object type: GRAVER
Broad period: MESOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Flint graver, three-sided column shape in plan and in profile and triangular in section. The three straight-ridged sides appear to have some slight damage. The distal tip is snapped and the proximal end comprised of cortex. The flint is pale grey flecked on a dark brown toned base and a secondary cortex of dark beige. Bond (2004) illustrates a similar example on page 109, Fig. 5.93, No. 163 which is dated to the Mesolithic period.
Created on: Monday 9th January 2012
Last updated: Wednesday 1st February 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-E4ED74

Record ID: PUBLIC-E4ED74
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Chert graver, near diamond-shaped in plan, bi-convex in profile and section. On the dorsal face, the non-corticated (presumed distal) end appears to be tapered but it is unlikely that this was for hafting. The corticated edges show damage. It is most likely a pressure tool, rather than one used for cutting or scraping. The right margin is backed, and since the left margin has damage it would appear to have been the working edge. It is a dull amber chert with cream cortex. There is primary cortex and it is likely to have derived from a local beach pebble. Butler (2005) shows a simila…
Created on: Sunday 18th December 2011
Last updated: Sunday 29th January 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-35B985

Record ID: PUBLIC-35B985
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Flint flake which has been fashioned into a graver. There is retouch along edge using a notch to form the graver tool. There is a natural ledge which could be used as backing. The pointed end opposite the notch and retouched edge has been abraded, probably naturally. The flint is a mottled grey and cream in colour and was likely derived from a local beach pebble. Bond [2004] illustrates a similar example on page 88, fig 5.73 No 2 which is dated to the Neolithic.
Created on: Saturday 10th December 2011
Last updated: Wednesday 1st February 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-F66FE2

Record ID: PUBLIC-F66FE2
Object type: GRAVER
Broad period: NEOLITHIC
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
A flint flake with a well defined notch so could be described as a graver. There is a considerable amount of gloss from use wear on the ventral side of the flake and this extends along the right hand edge from the distal to nearly the proximal end. The notch has been worked from the ventral side. There is also trimming along the right hand edge, ventral side, which coincides with the gloss from use wear. There is natural abrasion at the proximal. No cortex remains. The flint is a medium grey in colour and was likely derived from a local beach pebble. Mercer [1981] illustrates a si…
Created on: Wednesday 7th December 2011
Last updated: Wednesday 1st February 2012
Spatial data recorded.


  • Thumbnail image of LIN-CA6268

Record ID: LIN-CA6268
Object type: GRAVER
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A flint graver probably dating to the Neolithic or Bronze Age. The graver is roughly square in plan and plano-convex in cross-section with a triangular worked point at one end. The graver is made from brown coloured flint.
Created on: Monday 5th December 2011
Last updated: Monday 5th December 2011
Spatial data recorded.


  • Thumbnail image of LIN-CA5694

Record ID: LIN-CA5694
Object type: GRAVER
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A flint graver probably dating to the Neolithic or Bronze Age. The graver is oval in plan and plano-convex in cross-section with a small worked point at one end. The graver has a cortex striking platform and is made from brown coloured flint.
Created on: Monday 5th December 2011
Last updated: Monday 5th December 2011
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 42
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 43
  • Mean quantity: 1.024
  • Maximum: 2

Filter your search

Material

1 - 20 of 42 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.