Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Swansea
    • Show this many records per page: 100
    • Page: 2

  • Image not taken

Record ID: IARCH-DD39FA
Object type: HOARD
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Robertson 2000, 57 no. 281: ""Mr. Dods, writing from Park, March 23, 1826, described this find: 'The coins were found, 1823, at Pengwern Farm, adjoining Leithryd in the parish of Ilston, amongst the loose stones and rubbish of a limestone quarry close to a kiln. They were dispersed through a space scarcely exceeding 18 or 20 inches square and in general lay within 12 inches of the surface, over most part of which a slight turf has formed since the removal of the rubbish. No vessel or fragments of any were found near the spot, though sought for. They were all denares [sic] of the Emper…
Created on: Tuesday 13th January 2015
Last updated: Sunday 13th September 2015
Spatial data recorded. This findspot is known as 'Pengwern', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-F195EC
Object type: HOARD
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Robertson 2000, 185 no. 764: "In 1933, in a quarry, a skeleton was found and also 91 "coins lay beside the body: from accounts given by the finders they were originally in some fabric container of which traces were still visible, but it was impossible to save any of this. The only other objects met with were two much corroded iron nails with large round heads, of Roman type." The coins were all ant: Ant. Gallienus 8 Postumus 3 Victorinus 20 Claudius II 5 Tetricus I 16 Tetricus II 13 Probus 1 uncertain radiates 25 91 (1 deified) -W.F. Grimes, in BBCS, VII (1933-5), 209-19, types -85 c…
Created on: Tuesday 13th January 2015
Last updated: Sunday 13th September 2015
Spatial data recorded. This findspot is known as 'Ilston', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-BB20A9
Object type: HOARD
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Robertson 2000, 36 no. 183: ""A hoard of possibly thirty coins was found in building Gowerton County School for Girls, Dunvant Road; thirteen have been traced by Mrs. Williams and are 1 AE and 2 AE of Vespasian 1 Domitian 2 Trajan 5 Hadrian 3 Pius 2." (Footnote: "Information from Mrs. Williams, Royal Institute of South Wales, Swansea.") JRS, XXIX (1939), 200 1 coin said to be in Swansea Museum was not seen in 1948 (ASR)"
Created on: Tuesday 13th January 2015
Last updated: Sunday 13th September 2015
Spatial data recorded. This findspot is known as 'Gowerton', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-FA16BB
Object type: HOARD
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Robertson 2000, 213 no. 870: ""On 13 November 1966 a hoard of Roman coins, buried in a bronze bowl, was discovered during excavations for a septic tank on Mr. David Heard's new housing development at Penard, Gower (Glamorgan). 2,583 pieces - the original total was probably a little higher - were seized by the police on behalf of the coroner, but on advice from the National Museum of Wales it was decided that the silver-content of the coins was too low to justify the institution of treasure-trove proceedings.. As Plate IV shows, the container was badly damaged, but its shape was restor…
Created on: Tuesday 13th January 2015
Last updated: Sunday 13th September 2015
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-AB70D1
Object type: HOARD
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Robertson 2000, 221 no. 901: ""Jan. 1836. During the rough weather which prevailed at the close of the preceding year, seven third brass coins of the Emperor Carausius were found on the beach at the back of Port Tenant and were purchased by Mr. C.C. Francis. Within three months of the last mentioned discovery he [i.e. Mr. Francis] procured from the same locality and same person a beautiful and well preserved third brass coin of Allectus." The description showed that this was a quinarius of Allectus (obv. IMP C ALLECTVS P F AVG rev. VIRTVS AVG Galley [QL]) -L.W. Dillwyn, Contributions …
Created on: Tuesday 13th January 2015
Last updated: Sunday 13th September 2015
Spatial data recorded. This findspot is known as 'Port Tennant', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-35E9EE
Object type: HOARD
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Robertson 2000, 191 no. 789: ""In 1938, three Roman coins (now in the Royal Institution of South Wales) were found just above high-water mark on the east side of Oxwich Point. Their position - under a small slab of limestone - and condition suggest a hoard. Further search has produced no result." There were one ant. And two Alexandrian tetradrachms. Ant. Tetradrachms Treb. Gallus 1 Gallienus (sole reign) 1 Probus 1 1 2 -A.W., in BBCS, IX (1937-9), 379, types -2 coins, of Gallienus and Probus, in Royal Institution of South Wales, now Swansea Museum Examined, 1948 (ASR)"
Created on: Tuesday 13th January 2015
Last updated: Sunday 13th September 2015
Spatial data recorded. This findspot is known as 'Oxwich', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-3C8A23
Object type: HOARD
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Robertson 2000, 255 no. 1074: ""Hoard. In 1871 four coins, representing the years AD 305-37, were found together at 9 Castle Bailey Street, Swansea (Grant Francis MS).": Folles Maximinus Daza 1 Constantine I 2 Crispus 1 4 -Audrey Williams, in BBCS, IX (1937-9), 292, some types -3 out of 4 folles were of Maximinus Daza (GENIO POP ROM), Constantine I (BEATA TRANQVILLITAS), and Crispus (CAESARVM NOSTRORVM VOT V). The first two coins were minted at Trier, that of Crispus at Aquileia. Examined, 1948 (ASR), in Royal Institution of S. Wales, Swansea"
Created on: Tuesday 13th January 2015
Last updated: Friday 4th September 2015
Spatial data recorded. This findspot is known as 'Swansea (Castle Bailey Street)', grid reference and parish protected.


  • Thumbnail image of NMGW-E938CC

Record ID: NMGW-E938CC
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver coin Probably a worn and fragmentary threepence of Elizabeth I (1558-1603)
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E927A2

Record ID: NMGW-E927A2
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Edward III (1327-77) penny, London 'Florin' Issue (1344-51) 1.04g, worn
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E90A13

Record ID: NMGW-E90A13
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Edward III (1327-77) groat, London Series C (c. 1351-2) 4.38g (=67.6 grains) with an uneven shape but fairly full weight
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E81247

Record ID: NMGW-E81247
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver coin Elizabeth I (1558-1603) sixpence, London Privy mark: Pheon and dated 1563 1.79g, worn and clipped
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E7FB74

Record ID: NMGW-E7FB74
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin 15th century penny, probably of Edward IV, light coinage or second reign; York mint 0.43g
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E7E092

Record ID: NMGW-E7E092
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy token Copper farthing token, Youghal (c. 1646-57) Y [ ] / ship cf. Spink 6564 small module 0.57g, corroded
Created on: Thursday 8th January 2015
Last updated: Monday 16th October 2017
Spatial data recorded.


  • Thumbnail image of NMGW-E7CEA5

Record ID: NMGW-E7CEA5
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy token Copper farthing token, Kinsale (probably c. 1652-3) cf. Spink 6563 small module Cf G. Brady and C. Gallacher: 'Munster "Siege Pieces" or early tokens?; Numismatic Circular, March 1986, 75-77 1.03g, corroded
Created on: Thursday 8th January 2015
Last updated: Monday 16th October 2017
Spatial data recorded.


  • Thumbnail image of NMGW-E79F03

Record ID: NMGW-E79F03
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy coin Trajan (AD 98-117) dupondius, Rome SPQR OPTIMIO PRINCIPI; Dacian seated with trophy of arms to the left RIC 563 (Cos V = 103-11) 5.25g, corroded
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E6ED87

Record ID: NMGW-E6ED87
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin Commonwealth of England (1649-60) penny, London 0.37g, damaged
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E6B9A1

Record ID: NMGW-E6B9A1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy token Farthing token John Hughes, Jr Mercer, Carmarthen; n.d. Boon 2ba 0.89g
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-E69B34

Record ID: NMGW-E69B34
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy token Halfpenny token Mathew Davies Mercer, Swansea 1666 Boon 106a 1.89g
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D630F6

Record ID: NMGW-D630F6
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Possibly Edward III (1327-77) penny, York, with quatrefoil centre 0.84g, worn and battered
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D613C7

Record ID: NMGW-D613C7
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Roman silver coin Denarius, heavily-worn, possibly Republican 1.29g, fragment
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D5C4EB

Record ID: NMGW-D5C4EB
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin Scotland, James VI (1568-1625) eighth-thistle merk (1602), Edinburgh S. 5500 0.62g
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D5B4A1

Record ID: NMGW-D5B4A1
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin James I (1603-25) Sixpence, London First coinage; privy mark: thistle (1603-4) 2.74g (with soil), folded
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D4BA5A

Record ID: NMGW-D4BA5A
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Edward I (1272-1307) penny, London Class 3f-4 1.16g, incomplete
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D4917A

Record ID: NMGW-D4917A
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy coin Galba (AD 68-9) sestertius, Rome LIBERTAS PVBLICA RIC (2nd ed.) 309 16.62g, worn and water-rolled
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D19A74

Record ID: NMGW-D19A74
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Edward II (1307-27) penny, London Class 11b3 (c. 1311-14) 1.22g
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D18585

Record ID: NMGW-D18585
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy coin As or dupondius of mid-2nd century AD date, empress uncertain 5.30g, corroded
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-D16BFB

Record ID: NMGW-D16BFB
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin James I (1603-25) half groat, London Second coinage, Privy mark: Rose (1605-6) 0.78g
Created on: Wednesday 7th January 2015
Last updated: Wednesday 7th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-C0588A

Record ID: NMGW-C0588A
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Short Cross cut halfpenny Class 5a (c. 1205-9, from the reign of John); Lincoln, uncertain moneyer [+, ]ON.NICOL 0.60g
Created on: Tuesday 6th January 2015
Last updated: Tuesday 6th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-BE9776

Record ID: NMGW-BE9776
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval gold coin Portugal Joäo V (1706-50) Quartinto, Lisbon, 1714 (quarter maeda) which was current in England and Wales for 6 shillings and 9 pence during the 18th century, made into a love-token 2.09g
Created on: Tuesday 6th January 2015
Last updated: Tuesday 6th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-BCA0D4

Record ID: NMGW-BCA0D4
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin James I (1603-25) sixpence, London First coinage, second bust; privy mark: Thistle (& dated 1604) 2.26g, incomplete
Created on: Tuesday 6th January 2015
Last updated: Tuesday 6th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-9B1F2E

Record ID: NMGW-9B1F2E
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin Charles I (1625-49) half groat, London Privy mark: uncertain (1630-9) 0.64 gr
Created on: Thursday 11th December 2014
Last updated: Tuesday 16th December 2014
Spatial data recorded.


  • Thumbnail image of NMGW-9849D3

Record ID: NMGW-9849D3
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver coin Elizabeth I (1558-1603) shilling, London Privy mark: Tun (1592-4) 5.09g
Created on: Thursday 11th December 2014
Last updated: Thursday 11th December 2014
Spatial data recorded.


  • Thumbnail image of NMGW-982587

Record ID: NMGW-982587
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Scotland, William I (1165-1214) cut halfpenny Short Cross issue (c. 1195-1214 or possibly posthumous) Reverse possibly reads: [ ]NRO; possibly suggesting Roxburgh 0.59g, worn
Created on: Thursday 11th December 2014
Last updated: Thursday 11th December 2014
Spatial data recorded.


  • Thumbnail image of NMGW-DC2DCF

Record ID: NMGW-DC2DCF
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy coin weight Half guinea of William III (1694-1701), the maker is possibly John Wade Withers 1237 3.74g
Created on: Tuesday 2nd December 2014
Last updated: Tuesday 2nd December 2014
Spatial data recorded.


  • Thumbnail image of NMGW-DC1697

Record ID: NMGW-DC1697
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Venice, Michele Steno (1400-13) Soldino 0.38g
Created on: Tuesday 2nd December 2014
Last updated: Tuesday 2nd December 2014
Spatial data recorded.


  • Thumbnail image of NMGW-C7724E

Record ID: NMGW-C7724E
Object type: BRIDLE BIT
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy bridle fitting of uncertain date, probably Late Iron Age to Early Roman, possibly 1st or 2nd century AD The fitting is probably a bridle link from either a two or three-link bridle bit and is near complete but is heavily worn and corroded (with a surviving length of 56.0mm and a weight of 21.3g). The bridle fitting comprises two loops, both now open and only partially preserved but were at a perpendicular axis to each other and positioned each end of the bar. One loop has a smaller diameter (of 15.5mm) but has a comparatively wide sleeve (with a width of 25.5mm and a t…
Created on: Monday 1st December 2014
Last updated: Monday 20th June 2016
Spatial data recorded.


  • Thumbnail image of NMGW-C39755

Record ID: NMGW-C39755
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval open-work lead pilgrim's badge of an uncertain shrine probably of 15th century date The badge is incomplete, missing some of the detail on the left side and with a distorted pin (with an overall length of 48.6mm, a thickness of 1.5mm and a weight of 5.1g). The badge now depicts two figures possibly both saints or clerics, the taller, central figure (giving the badge a surviving height of 41.9mm) appears to have lost both the headgear and his right arm. The remains of the headgear is beaded around the brow and the hair falls to the sides of the head, over the ears. Both fig…
Created on: Monday 1st December 2014
Last updated: Monday 1st December 2014
Spatial data recorded.


  • Thumbnail image of NMGW-47ACD3

Record ID: NMGW-47ACD3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Late medieval copper alloy buckle of mid-14th to mid-15th century date The buckle is incomplete, missing the sheet plates and one of the side forks (with a length of 8.1g). The frame is oval with a central, pointed lip (5.0mm wide) and a probable notch for the pin, now worn. Otherwise the frame is of consistent with and thickness and of triangular section (2.5mm wide and 2.4mm thick). There are rounded ribs behind the frame (giving the buckle a maximum thickness of 4.6mm and with a length of 5.6mm) suggesting that separate sheet-metal plates were employed. There is a rabbet (3.3mm …
Created on: Tuesday 25th November 2014
Last updated: Tuesday 25th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-46D749

Record ID: NMGW-46D749
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Lead-tin alloy, possibly a fragmentary medieval pilgrim's badge The possible badge is fragmentary (with a surviving length of 19.9mm and a weight of 5.6g). The base of the fragment appears to thin to the break, possibly suggesting a step. There is a convex moulding near the base, above which there are two lateral grooves suggesting a band. The sides are straight and convergent towards the base (with a maximum width of 17.0mm). The fragment is of D-shaped section (with a maximum thickness of 5.0mm), enhanced with a central vertical rib and flanking smaller ribs now worn and corroded…
Created on: Tuesday 25th November 2014
Last updated: Tuesday 25th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-46A3A3

Record ID: NMGW-46A3A3
Object type: HAMMER
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published Find published
Socketed bronze hammer probably of Late Bronze Age date (c. 1150 - 700BC) The hammer is fragmentary, broken across its width and is represented by just under half of the original (with a surviving width of 23mm and a weight of 40.9g). The whole length of the hammer is represented on the side (with a length of 52.2mm). The mouth suggests a square or rectangular body section (with external surviving dimensions of 22.3mm x 16.3mm and with an internal width of 16.7mm) and had a simple moulding (5-6mm long), now worn. There is no surviving evidence for casting runner stubs on the mouth …
Created on: Tuesday 25th November 2014
Last updated: Tuesday 19th September 2017
Spatial data recorded.


  • Thumbnail image of NMGW-4675A9

Record ID: NMGW-4675A9
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published Find published
Late Bronze Age bronze socketed tool fragment, probably an axe mouth fragment The tool is fragmentary, represented by a mouth fragment (with a surviving length of 22.6mm, a surviving width of 20.6mm and a weight of 6.0g). The mouth is near-straight for most of its length but appears to be turning at the break on one side. There is a prominent collar moulding, thickest at the mouth (at 4.0mm thick and 7.9mm long) and there is no surviving evidence for a casting stub on the mouth. There are no ribs present on the fragment. One side has an irregular break, while the other side, with t…
Created on: Tuesday 25th November 2014
Last updated: Tuesday 19th September 2017
Spatial data recorded.


  • Thumbnail image of NMGW-6300C9

Record ID: NMGW-6300C9
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy knife handle terminal of 17th or 18th century date The terminal is complete (with a length of 13.6mm and a weight of 8.6g) but no other part of the handle or knife is represented. The attachment end is gently convex and has a slot to accommodate the end of the knife tang (1 mm wide and 5mm deep). The sides are straight and divergent towards the apex (giving the terminal a maximum width of 17.4mm). The faces are convex across their widths and are slightly thicker at the base (with a maximum thickness of 6.8mm). The faces are decorated prominent incised cro…
Created on: Friday 14th November 2014
Last updated: Friday 14th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-62E55B

Record ID: NMGW-62E55B
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Late medieval copper alloy pilgrim badge of 15th to mid 16th century date The pilgrim badge is complete (with a length of 25.8mm and a weight of 3.0g) but the surface is heavily-worn. The open-work decoration is in cast-relief (with a thickness of 1.8mm) and depicts the annunciation, or the announcement to Mary by the Angel Gabriel that she is to become the mother of Christ. Mary is depicted on the left, seemingly kneeling at a prie-dieu with the folds of dress evident to the sides of the prie-dieu. Mary has her left arm raised to her breast and right arm on the book and with her h…
Created on: Friday 14th November 2014
Last updated: Friday 14th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-61B893

Record ID: NMGW-61B893
Object type: SICKLE
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published Find published
Late Bronze Age socketed sickle of Ewart Park or Llyn Fawr metalworking, corresponding to Needham's (1996)[1] Periods 7 - 8, dated to 950 - 500BC. The sickle is fragmentary, represented by the incomplete socket and beginning of the blade (with a surviving length of 30.2mm and a weight of 18.1g). The socket is oval and is basal edge is undamaged (24.6mm long and 11.7mm wide, with internal dimensions of 23.1mm x 18-19mm). The socket is cast (1.3mm thick) without a visible casting seam and the side without the blade is straight. The top of the socket is damaged and has been slightly d…
Created on: Friday 14th November 2014
Last updated: Tuesday 19th September 2017
Spatial data recorded.


  • Thumbnail image of NMGW-906A4F

Record ID: NMGW-906A4F
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Swansea
Workflow stage: Published Find published
Neolithic flaked and polished stone axe, c. 3500 - 2100BC The axe is near-complete (with a length of 164mm and a weight of 381.9g) with a few recent flaking scars and some rounding through water-rolling. The butt is narrow and moderately straight (with a width of 24mm). Both sides are convex, reaching their widest position (of 58.7mm) close the blade edge (46mm from the edge). The widest point is also close to the point of maximum thickness of the axe (at 31.0mm, 54mm from the blade edge). Both faces are convex across both their lengths and widths, with remnants of partially ground…
Created on: Thursday 23rd October 2014
Last updated: Tuesday 27th September 2016
Spatial data recorded.


  • Thumbnail image of NMGW-66C439

Record ID: NMGW-66C439
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Short Cross penny, Class 1C (1185-9, during the reign of Henry II) Raul, London 1.38g
Created on: Tuesday 21st October 2014
Last updated: Tuesday 21st October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-669D7B

Record ID: NMGW-669D7B
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy coin Spain, Philip IV (1621-65) copper countermarked four-maravedis, 1655 Possibly an earlier issue of Philip III 3.04g
Created on: Tuesday 21st October 2014
Last updated: Tuesday 21st October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-50A5F5

Record ID: NMGW-50A5F5
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin Elizabeth I (1558-1603) sixpence, London Privy mark: coronet and dated 1567 0.93g, incomplete and corroded
Created on: Monday 20th October 2014
Last updated: Monday 20th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-4D06DB

Record ID: NMGW-4D06DB
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver coin Elizabeth I (1558-1603) sixpence, London Privy mark: Acorn & dated 1573 2.68g, worn & a little clipped
Created on: Monday 20th October 2014
Last updated: Monday 20th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-4CE946

Record ID: NMGW-4CE946
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Fragment of a penny of an Edward, c. 14th century; otherwise uncertain
Created on: Monday 20th October 2014
Last updated: Monday 20th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-4FD8AE

Record ID: NMGW-4FD8AE
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy hooked mount probably from furniture or similar The mount is of two-piece construction and is complete but the hook is now in two pieces (with a weight of 15.8g). The back-plate (with a length of 62.8mm, a maximum width of 24.6mm and a thickness of 1.9mm) has a trefoil terminal at the top with a knop at the apex and is rounded at its base with concave sides. The plate was attached using two countersunk holes (of 4.6mm and 5.0mm diameter) near each end. The hook is separate and is joined with a square mortise before a collar at the base of the hook (giving…
Created on: Wednesday 8th October 2014
Last updated: Wednesday 8th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-2995AA

Record ID: NMGW-2995AA
Object type: BRIDLE BIT
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy bridle fitting of uncertain date, probably Late Iron Age to Early Roman, possibly 1st or 2nd century AD The fitting is probably a bridle link from either a two or three-link bridle bit and is near complete but is heavily worn and corroded (with a surviving length of 60.4m m and a weight of 28.7g). The bridle fitting comprises two loops at a perpendicular axis to each other, positioned each end of the bar. The smaller loop was near circular (with a width of 14.4mm and internal diameter of 6.4mm) but is now eroded and open at the rear, probably through wear. There are th…
Created on: Monday 6th October 2014
Last updated: Monday 20th March 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-C84340

Record ID: PUBLIC-C84340
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
A fragment of North Devon Gravel-tempered ware. The fragment includes part of the base of a bread platter. The fabric is oxidised on the exterior of the vessel and reduced to its interior. The coarse components include rounded/sub-rounded quartz inclusions (1mm-4mm), sandstone inclusions (up to 4.5mm) and inclusion of tiny (max 1mm) ceramic pellets. The interior of the vessel is glazed, green in colour with the exterior being unglazed.
Created on: Friday 23rd March 2012
Last updated: Wednesday 18th September 2013
Spatial data recorded. This findspot is known as 'Granogwen Road', grid reference and parish protected.


  • Thumbnail image of WAW-9DD4F0

Record ID: WAW-9DD4F0
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
An extremily worn bent silver late Medieval or Post-medieval coin of uncertain ruler and mint.
Created on: Thursday 15th December 2011
Last updated: Thursday 15th December 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-A5C6B7

Record ID: PUBLIC-A5C6B7
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published Find published
Medieval lead alloy pilgrim's badge, probably of 15th century date The pilgrim badge depicts the bust of Saint Thomas Becket and is complete with some peripheral damage (with a length of 61.0mm and a weight of 7.0g). Thomas is depicted wearing a mitre with a cross patée at the apex. The mitre is decorated with a ring-and-dot motif in cast relief and the front has a vertical panel containing saltire crosses with pellets between the arms and a ring-and-dot between crosses. Thomas is depicted full-face with his hair flanking the sides of his face, which has bent behind on one side. Th…
Created on: Thursday 4th August 2011
Last updated: Monday 8th August 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-924E02

Record ID: PUBLIC-924E02
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Decorative copper alloy terminal or handle of uncertain date, possibly post medieval The item is part of a composite object (with a length of 35.9mm and a weight of 8.4g). The object is hollow and contains remnants of a shaft, probably of wood. The mouth is now distorted and closed (with a length of 14.2mm and a compressed thickness of 4.2mm). The object then narrows before flaring out at the rounded and thickened end (with a maximum thickness of 10.6mm). The object has a corroded perforation on one side and one face has a decorative incised border, now worn. The surface is dark grey…
Created on: Wednesday 3rd August 2011
Last updated: Wednesday 10th August 2011
No spatial data available.


  • Thumbnail image of PUBLIC-923241

Record ID: PUBLIC-923241
Object type: BROOCH
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Probably a Roman Copper alloy bow brooch of Crossbow type and of 3rd to 4th century date The brooch is fragmentary, represented by the crossbow and top of the bow only (with a surviving overall length of 20.4mm and a weight of 14.3g). The corrosion and encrustation of the surface makes it difficult to identify features, although there is a suggestion of a corroded and filled slot at the rear of the head. The slot would have accommodated a hinged pin. The crossbar is distorted (with a length of 52.2mm) and has circular sectioned arms (with a maximum diameter of 6.2mm and a minimum dia…
Created on: Wednesday 3rd August 2011
Last updated: Wednesday 10th August 2011
No spatial data available.


  • Thumbnail image of PUBLIC-9217D6

Record ID: PUBLIC-9217D6
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (Late Anglo-Saxon) copper alloy stirrup-strap mount of 11th century date The stirrup-strap mount is of Williams' (1997, p 89-91) Class B, Type 2 and Group 3; and is incomplete, missing the apex (with a surviving length of 34.8mm and a weight of 13.9g). The mount is decorated with openwork and cast relief depicting a heavily-debased head or mask with flanking beasts. The mount has broken across two perforations below the apex and presumably beneath a fixing point (Where it has a width of 24.9mm) before widening (to produce a maximum width of 32.4mm). There are raised ro…
Created on: Wednesday 3rd August 2011
Last updated: Friday 4th August 2017
No spatial data available.


  • Thumbnail image of PUBLIC-6EA0D6

Record ID: PUBLIC-6EA0D6
Object type: HARNESS FITTING
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Roman copper alloy harness fitting or terret of strap-mounted type of 1st or 2nd century AD date. The terret is of simple, double-looped form (strap-mounted) and is complete, but eroded (with an overall length of 41.5mm and a weight of 21.2g). The rein loop is oval (with an external width of 36.5mm and an internal width of 28.2mm and internal height of 24.7mm). The loop is of oval section near the base, becoming circular and thinning at the apex (with a maximum diameter of 6.9mm and minimum diameter of 1.8mm). It is unclear whether the loop has narrowed because of wear through rubbin…
Created on: Wednesday 20th July 2011
Last updated: Monday 4th July 2016
No spatial data available.


  • Thumbnail image of PUBLIC-6E70E3

Record ID: PUBLIC-6E70E3
Object type: STRAP END
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy strap-end, probably of later 13th to mid 15th century date The strap-end is of sheet metal with a separate forked spacer type and is incomplete, missing one of the sheet plates (with a length of 59.7mm and a weight of 7.7g). The strap-end is widest and thickest near the attachment end (where it has a width of 18.4mm and a thickness of 4.12mm). The sides are straight and converge slightly towards the outside edge (with a width of 16.7mm and a thickness of 3.2mm). The outside edge is concave and is decorated with an open aperture (4.5mm diameter) cutting the edge.…
Created on: Wednesday 20th July 2011
Last updated: Thursday 21st July 2011
No spatial data available.


  • Thumbnail image of PUBLIC-6E4763

Record ID: PUBLIC-6E4763
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy harness pendant, probably of 13th or 14th century date The harness pendant is of two-part form, comprising a frame and swivelling pendant and is near-complete, missing the suspension mount and one terminal (with a length of 47.7mm and a weight of 11.7g). The suspension mount was hinged through a lug (3.1mm thick 6.0mm wide), which has broken through the central perforation (2.8mm diameter). The quatrefoil frame (with a width of 29.2mm) is open and an arm projecting outwards from between each of the four lobes (giving the pendant a maximum width of 34.0mm). The…
Created on: Wednesday 20th July 2011
Last updated: Wednesday 14th September 2011
No spatial data available.


  • Thumbnail image of PUBLIC-6DA0F3

Record ID: PUBLIC-6DA0F3
Object type: BUTTON
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Lead alloy button of uncertain date, probably medieval or early Post Medieval The button is complete (with an overall depth of 12.1mm and a weight of 14.6g). The head is sub-circular (with a diameter of 28.6mm - 29.6mm and 5mm thick). The face is slightly convex and is decorated with three cast concentric ribs around a central knop. The underside has a comparatively heavy attachment loop (6.8mm thick, 13.7mm long and 6.8mm high) of D-shaped section. The perforation (3.3mm diameter) has been cast by inserting a rod into the mold, which has formed the parallel ribs, or guides running i…
Created on: Wednesday 20th July 2011
Last updated: Thursday 21st July 2011
No spatial data available.


  • Thumbnail image of PUBLIC-D7ADE2

Record ID: PUBLIC-D7ADE2
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy decorative knife fitting (end stop) probably of late 16th or 17th century date The fitting is complete (with a length of 10.6mm, a thickness of 6.1mm and a weight of 4.6g). The underside has a V-shaped groove to accommodate the top of the knife tang (2.8mm deep). The fitting is of bifid form, with a curving arm projecting from each side (giving a width of 19.1mm) and thinning to the terminals. The terminals are enhanced with grooves. The base of the fitting also has decorative grooves near the base. The knife fitting is unpatinated with a golden-bronze su…
Created on: Wednesday 13th July 2011
Last updated: Monday 18th July 2011
No spatial data available.


  • Thumbnail image of PUBLIC-D77F20

Record ID: PUBLIC-D77F20
Object type: SPOON
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Early post-medievall tin alloy (pewter) spoon, probably of 16th century date. The spoon is incomplete, missing part of the bowl and has a slightly distorted stem (with a length of 155.4mm and a weight of 33.9g). The terminal knop is of flattened spherical form with a protruding nipple. The knop is decorated with a whirligig device in cast relief. The rear of the knop may also have been decorated with a similar motif but is now worn. There is a rib moulding at the top of the stem, before the knop. The stem is of sub-hexagonal section (5mm wide and 4mm thick), becoming D-shaped near the…
Created on: Wednesday 13th July 2011
Last updated: Wednesday 30th April 2014
No spatial data available.


  • Thumbnail image of PUBLIC-6C62F1

Record ID: PUBLIC-6C62F1
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy seal matrix, probably of late 13th or 14th century date The seal matrix is near complete, with some peripheral damage to the die (with a length of 17.6mm and a weight of 4.5g). The handle has a suspension loop (2.8mm internal diameter) before a collar molding leading to the hexagonally faceted stem, with sides diverging towards the seal die. The die is circular (with a diameter of 18.4mm) and has suffered peripheral loss. The central device is heraldic and depicts a shield with an intersecting horizontal band (fess), the band contains three crosses with floriat…
Created on: Friday 8th July 2011
Last updated: Wednesday 14th September 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-C883C5

Record ID: PUBLIC-C883C5
Object type: FURNITURE FITTING
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval to post medieval copper alloy looped fitting The fitting is complete (with a length of 25.2mm, a depth of 8.0mm, a thickness of 1.5mm and a weight of 2.2g). The fitting resembles a fish shape with a sub-triangular terminal (giving the fitting a maximum width of 12.3mm) and is gently convex across its width. On the rear (near the pointed end) is an integral, circular sectioned loop (8.2mm wide, 1.8mm diameter and 6.4mm high) defining a circular aperture (4.4mm diameter). Little of the original surface survives on the fitting and no applied decoration is discernible. The s…
Created on: Thursday 30th June 2011
Last updated: Thursday 7th July 2011
No spatial data available.


  • Image not taken

Record ID: PUBLIC-C35906
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
Roman silver denarius of Vespasian (AD 69-79), dating to AD 70 (Reece Period 4), COS ITER TR POT, Pax seated left with branch and caduceus. Mint of Rome. RIC II (2nd ed), p. 60, no. 29.
Created on: Thursday 30th June 2011
Last updated: Thursday 13th October 2016
Spatial data recorded.


  • Thumbnail image of PUBLIC-19F764

Record ID: PUBLIC-19F764
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy trade weight English one-ounce weight; crowned 'C' mark for Charles I (1625-49) or Charles II (1660-85). Sword mark for london.
Created on: Wednesday 22nd June 2011
Last updated: Wednesday 14th September 2011
No spatial data available.


  • Thumbnail image of PUBLIC-0ABF52

Record ID: PUBLIC-0ABF52
Object type: MOUNT
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy belt mount probably of late medieval date The mount is complete and is of lozenge form (with a length of 21.7mm, a width of 16.1mm an overall depth of 8.0mm and a weight of 3.4g). The mount is decorated with a cross in cast relief; between the arms of the cross are triangles, incorporating trefoils or pellets along the sides running parallel with the edges. At the centre is a circular pellet. The rear of the mount is hollowed. The mount was attached by two integral pins positioned near the top and bottom. Traces of gilding survives in recessed areas and elsewhe…
Created on: Tuesday 21st June 2011
Last updated: Tuesday 13th September 2011
No spatial data available.


  • Thumbnail image of PUBLIC-0AACF8

Record ID: PUBLIC-0AACF8
Object type: MOUNT
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy belt mount probably dating to the later half of the 14th century. The belt mount is complete and is of bar-mount form and has two smaller terminal lobes, flanking a central lobe (with a length of 23.9mm and a weight of 1.9g). The two smaller terminal lobes (5.1 & 5.3mm wide and 2.3 & 2.6mm deep) are perforated to take separate attachment rivets for securing the mount. The rear of the terminal lobes is flat. One of the copper alloy attachment rivets remains in place (with a length of 3.7mm and a diameter of 1.5mm). The central domed lobe (with a width of 12.5mm …
Created on: Tuesday 21st June 2011
Last updated: Wednesday 14th September 2011
No spatial data available.


  • Thumbnail image of PUBLIC-0A9B73

Record ID: PUBLIC-0A9B73
Object type: BADGE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval tin-lead alloy pilgrim souvenir, probably of 14th to 15th century date The pilgrim souvenir is fragmentary, broken on all sides (with a surviving length of 23.5mm, a maximum surviving width of 17.4mm, a thickness of 1.2-1.7mm and a weight of 2.3g). The fragment depicts a female figure within a rectangular openwork frame. The figure's face is cast in relief and she is wearing a beaded headdress and is bearing her breasts. The figure is flanked on both sides with near vertical ribbing, possibly representing hair or part of the headdress. The rear has a vertical lug, now folde…
Created on: Tuesday 21st June 2011
Last updated: Thursday 23rd June 2011
No spatial data available.


  • Thumbnail image of PUBLIC-0A5C65

Record ID: PUBLIC-0A5C65
Object type: VESSEL
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy looped fitting, probably from a vessel of uncertain date. The loop is cast and is complete (with an overall length of 31.2mm and a weight of 25.2g). The loop is oval (with a height of 26.4mm and a width of 30.6mm; 13.9mm x 17.4mm internal) and is comparatively substantial with a sub-oval section (7.9mm wide and 6.7mm thick). Wear facets are now difficult to discern on the interior of the loop. The loop was attached by an integral rivet, which has been peened-over on the face. The inside end of the rivet also has a linear incised line, perpendicular to the axis of the lo…
Created on: Tuesday 21st June 2011
Last updated: Thursday 23rd June 2011
No spatial data available.


  • Thumbnail image of PUBLIC-096647

Record ID: PUBLIC-096647
Object type: PIN
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Late Bronze Age copper alloy cup-headed pin The pin is complete (with a distorted length of 237mm, a straightened length of approximately 270mm and a weight of 32.7g). The head has a slightly oval mouth (13.4mm - 14.3mm external diameter, 12mm internal diameter and 3mm deep). The sides of the cup-head are straight and parallel before curving sharply to the shaft. The interior of the cup-head contains no discernible decoration and is filled with corrosion. The pin shaft is of circular section and has a prominent swelling beneath the head (positioned 20mm beneath the head and producin…
Created on: Tuesday 21st June 2011
Last updated: Friday 15th July 2011
No spatial data available.


  • Thumbnail image of PUBLIC-0919A7

Record ID: PUBLIC-0919A7
Object type: SPEAR
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Bronze Age bronze socketed spearhead, of pegged type and of Greenwell and Brewis' (1909, 458-460) Type V. Class V spear heads are ascribed to the Wilburton and Ewart Park phases of the Late Bronze Age, corresponding with Needham's (1996) Periods 6 and 7, dated to 1150 - 750BC. The spearhead is complete (with a length of 113.8mm and a weight of 67.3g). The socket is near circular (with an external diameter at the mouth of 23.5-24.1mm, an internal diameter of 18mm and a thickness of 2.6mm). The sides of the socket are straight and convergent. The shaft was attached through two circul…
Created on: Tuesday 21st June 2011
Last updated: Thursday 23rd June 2011
No spatial data available.


  • Thumbnail image of PUBLIC-F51026

Record ID: PUBLIC-F51026
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver coin James I (1603-25) half groat, London Second coinage, 1604-19; privy mark - probably coronet (1607-9)
Created on: Monday 20th June 2011
Last updated: Wednesday 22nd June 2011
No spatial data available.


  • Thumbnail image of PUBLIC-E35A11

Record ID: PUBLIC-E35A11
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Short Cross penny; Class 7c (Henry III) c. 1237-42 London, Nicole 1.00g, clipped
Created on: Tuesday 7th June 2011
Last updated: Tuesday 2nd August 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-CA7087

Record ID: PUBLIC-CA7087
Object type: FLAKE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Prehistoric retouched flint flake The flake has two areas of cortex surviving on corners. The retouch is crude and confined to two of the tree edges. The grey brown flint is unpatinated
Created on: Monday 6th June 2011
Last updated: Thursday 7th July 2011
Spatial data recorded.


  • Thumbnail image of NMGW-A3C5D2

Record ID: NMGW-A3C5D2
Object type: FLAKE
Broad period: NEOLITHIC
County: Swansea
Workflow stage: Published Find published
Prehistoric notched flint flake The flake appears to be core rejuvenation flake and is cortical with remnants surviving near the distal end. Near the distal end on the opposite face is a retouched notch (13mm long). The flint is patinated pale grey and the notch appears to cut through the patination, implying secondary use of the flake.
Created on: Friday 11th March 2011
Last updated: Tuesday 12th March 2013
Spatial data recorded.


  • Thumbnail image of NMGW-10DBB2

Record ID: NMGW-10DBB2
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Henry VI (1422-61) groat, Calais; annulets issue, 1422-7 North 1424.
Created on: Friday 4th March 2011
Last updated: Tuesday 11th March 2014
Spatial data recorded.


  • Thumbnail image of CORN-F2B186

Record ID: CORN-F2B186
Object type: BADGE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Sheet pewter pilgrim's badge or souvenir in the form of five geese within a wattle enclosure, with four geese looking left and one looking right. The goose looking right has defined feathers and more detail on the head. This may have been the goose restored to life by the saint (see below). The wattle enclosure is bordered by two protruding knops, one at either edge, and divided by a central post, below the geese. The back of the badge has a rectangular attachment platform and the beginnings of an attachment loop at the centre. The badge is in good condition with little powdering or c…
Created on: Thursday 13th January 2011
Last updated: Wednesday 8th January 2014
Spatial data recorded.


  • Thumbnail image of CCI-910463

Record ID: CCI-910463
Object type: COIN
Broad period: IRON AGE
County: Swansea
Workflow stage: Published Find published
Created on: Sunday 21st March 2010
Spatial data recorded.


  • Image not taken

Record ID: IARCW-63DAE39847
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE39851
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE3985C
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE39865
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE3986F
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE39879
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE39882
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE3988C
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE39896
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE3989F
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398A9
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398B3
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398BD
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398C6
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398D0
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398DA
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398E3
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398ED
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


  • Image not taken

Record ID: IARCW-63DAE398F7
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published Find published
A Radiate of Tetricus I (271-274) Reverse: Uncertain Reference: Uncertain
Created on: Sunday 21st March 2010
Last updated: Sunday 21st March 2010
Spatial data recorded. This findspot is known as 'Pennard', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 3,618
Search server index: asgard

You are viewing records: 101 - 200.

Search statistics

  • Total quantity: 4,208
  • Mean quantity: 1.166
  • Maximum: 509

Filter your search

101 - 200 of 3,618 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.