Record ID: NMGW181
Object type: FLAKE
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Flint knife. Length 55.2mm, breadth 33.3mm, thickness 12.5mm, weight 21.8 grams.
Created on: Friday 12th November 1999
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Port Eynon', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW38
Object type: SPOON
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Published
Lead alloy broad spoon bowl stamped with initials " B D[?] T" (the letter D is enclosed with a shield-shaped panel). Dimensions of bowl 51-59mm. 16th - 17th century.
Created on: Tuesday 13th March 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW319
Object type: RAPIER
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Tip of a Middle Bronze Age rapier or dirk with a flattish mid-section and wide slightly bevelled edges. The surface of the fragment is corroded and its edges are damaged. The break is ancient. Surviving length 71.5mm, maximum surviving width 17mm, maximum surviving thickness 2.5mm. The fragment is an example of Burgess and Gerloff's Group IV (1981, 3, 62-112). It is not possible to identify which particular type of Group IV blade this fragment is an example of because the diagnostic features high up on the blade and butt have been lost.
Created on: Thursday 15th March 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3100
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Crudely cast, slightly waisted, copper alloy vessel leg. Length 41mm, width 28-33mm, thickness 18mm, weight 77.4 grams. Identifying the vessel type that this leg is from is not possible. Presumably it was either a cauldron, skillet, jug or ewer. Close dating is equally difficult as the form of the legs like this did not change from the medieval period until the seventeenth century (Read 1995, 95).
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3101
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Several cast copper alloy vessel fragments including the basal end of two vessel legs form different vessels but both plano-convex in section and with decorative outer longitudinal ribs; cast copper alloy rim fragments from four different wide and steep sided vessels (probably cauldrons); and a cast copper alloy rim fragment from a wide and steep sided vessel which includes an integrally cast suspension loop, the upper part of which contains a pronounced wear facet.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3102
Object type: WEIGHT
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Freestanding discoidal crudely cast lead, or lead alloy weight decorated with a cross motif. Diameter 23-25mm, thickness 6.5mm, weight 23 grams. Lead weights such as these could have performed a variety of functions such as unofficial weights and measures used by traders and merchants. Dating them is difficult, excavated examples range in date from the medieval period to the nineteenth century.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3103
Object type: BUTTON
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Lead, or lead alloy (pewter), slightly domed button with a large attachment loop. The button is decorated with a moulded quatrefoil design. Diameter 14mm, weight 5.8 grams. Although lead is a soft metal, and therefore inherently unsuitable for use as a button, the ease with which it could be moulded ad its relative cheapness led to it being used for such a purpose (Bailey 1997, 38). Study of the flash lines on this example suggest that it was cast in a three-part mould. Comparable lead buttons are known from thirteenth century contexts in London (i.e. Egan 1991, 274, no.1376, fig.178)…
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW398
Object type: SCABBARD
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Published
Cast copper alloy chape consisting of a U-shaped socket which is connected to an incomplete perforated terminal through a waisted constriction. The front of the chape is perforated by two small rivets which would have attached it to the scabbard. Part of the back and the lower terminal of the chape are missing. Much of the original surface is lost; however, there are traces of linear ornament on the terminal of the chape. Height 39.5mm, width 22mm, thickness 6mm, weight 9.8 grams. Chapes are terminals for leather scabbards which accommodated swords or daggers. Copper alloy chapes are …
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW399
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Cast copper alloy double loop annular buckle with plain bevelled edges, slightly recessed strap bar and notch to accommodate the pin. The strap bar is distorted. Diameter 34mm x 38mm, thickness 3mm, weight 10.5 grams. Fourteenth to seventeenth century in date.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3125
Object type: COIN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Published
Elizabeth I threepence. Privy mark ermine and dated 1572.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3126
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Henry III long-cross penny, uncertain class, Nicole, London. Bent double and crimped, perhaps on to a string.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3105
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Complete cast copper alloy vessel leg. Part of the apparently integrally cast body of the vessel remains attached to the leg. Length 78mm, width 16-17 mm, weight 115.2 grams. Medieval to post-medieval. The surface of the leg is preferentially blackened in comparison to the inside of the vessel body; this "sooting" is a common phenomena and is due to oxidisation of the outer surface of the vessel through exposure to the cooking fire.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3106
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Fragment of a large iron vessel (cauldron?) consisting of a separately forged leg, plano-convex in section and with a decorative outer longitudinal ridge, and part of the vessel's base. Dimensions of surviving portion of the vessel's base 96mm x 72mm, vessel thickness 6mm, length of leg 45mm, weight 276.4 grams. Although cast iron vessels of this form were used until the early twentieth century the longitudinal ridge on the leg is similar to those decorating late medieval and post-medieval copper alloy vessel legs suggesting it may be of earlier date.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3107
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Wall fragment of a cast tin-lead alloy (pewter) vessel. The fragment has been flattened and it is not possible to determine the original form of the vessel. Dimensions 46mm x 48mm x 1mm, weight 16.6 grams. Medieval or post-medieval in date.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3108
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Cast copper alloy rim fragment from a wide and steep sided vessel (probably a cauldron). Surviving vessel depth 37mm, thickness 3.5-4.5mm, weight 42.1 grams. Medieval or post-medieval in date. Medieval cast copper alloy vessels are discussed by Egan (1998, 161-169); several post-medieval examples are noted by Margeson (1993, 90-94).
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3109
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Rim fragment of a large cast tin-lead alloy (pewter) vessel with steep sides. Original diameter c.200mm, thickness 1mm, weight 10.7 grams. Medieval or post-medieval in date.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3182
Object type: RAPIER
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Tip of a slender rapier, which has been reworked and used as a short dirk. There are no ridges or ribs visible on the blade, which has a slightly flattened but rounded cross section. This suggests that the artefact was once a Group IV rapier (Burgess & Gerloff 1981, 62). It is not possible to assign this reworked artefact to individual type within the overall group since diagnostic features high up the blade and on the original butt have been lost. The top of the blade fragment has been reworked by flattening the blade, though without splaying it. A new butt was created by inserting t…
Created on: Wednesday 30th May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-C595C5
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Created on: Tuesday 3rd June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-860BE7
Object type: COIN
Broad period: ROMAN
County: Swansea
Workflow stage: Published
A copper alloy Roman nummus of the House of Constantine (AD 307-361), dating to the period AD 330-335 (Reece Period 17). Wolf and twins [VRBS ROMA] reverse type. Mint of Trier. Details not recorded.
Created on: Thursday 12th June 2003
Last updated: Tuesday 12th May 2020
Spatial data recorded.

Record ID: NMGW-2C8375
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Near complete Medieval cast copper alloy buckle with zoomorphic integral plate and ornate subrectangular frame, possibly of 14th century date. The sides of the buckle frame taper towards the outside edge of the frame, which gently curves towards a prominent lip, incorporating a notch for the pin. The pin is triangular and flat in profile, with the suggestion of two transverse markings around the pin. The plate is thick but relatively slender in relation to the frame. The plate depicts a beast, probably a dog biting, on the broken attachment at the terminal. The reverse of the buckle is…
Created on: Friday 20th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.