Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Milton Keynes
    • Page: 7

  • Thumbnail image of BUC-DCE44D

Record ID: BUC-DCE44D
Object type: BRACELET
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman copper alloy bracelet, dating from AD 320-450. At either end of the fragment is a worn break, and the fragment has been bent and curves back on itself. The bracelet is decorated with multiple motifs, most of the fragment is decorated with a border of triangular notches along each edge. This terminates in three raised collars, a diagonal raised line, flanked by a ring and dot motif. The break is after this. There is no decoration on the reverse, the bracelet has a mid green patina. It measures 34.7mm in length, 1.2mm in thickness, and weighs 1.50g. Similar armlets…
Created on: Monday 22nd October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-9F801B

Record ID: BUC-9F801B
Object type: NAIL CLEANER
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy type nail cleaner dating from c.43 - 200 AD. The cleaner is leaf shape, and flat. The terminal end of the cleaner is shaped into two rounded prongs, these are worn. There is a central notch from which a groove extends up into the body of the nail cleaner. The neck of the nail cleaner is decorated with a incised lines crossing to create lozenge shapes. At the attachment end there is a circular loop, it is worn and broken and about half is missing. The nail cleaner has a dark green patina, and measures 40.5mm in length, 8.9mm in width, and 1.0mm in thickn…
Created on: Friday 19th October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-9F4DC6

Record ID: BUC-9F4DC6
Object type: NAIL CLEANER
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete Roman copper alloy Baldock type nail cleaner dating from c.43 - 200 AD. The cleaner is leaf shape, and flat. The terminal end of the cleaner is shaped into two rounded prongs, these are worn and the central notch is slightly off centre. There is an incised line running around the edge of the cleaner on both sides. At the attachment end is a sub triangular shaped loop, pierced with a circular hole in the centre. The corners are rounded, and the attachment sits at 90 degrees to the nail cleaner. The nail cleaner has a dark green patina, and measures 45.8mm in length, 8.6mm in …
Created on: Friday 19th October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-9F1825

Record ID: BUC-9F1825
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman bow brooch of Hod Hill type dating to the 1st Century AD. At the head of the brooch is a worn trapezoidal shaped hinge with a rectangular notch in the centre, the pin is missing. Below this the bow extends and widens, with a ridge above the hinge. The bow then narrows before widening into the rectangular section of the bow. Running down the centre of this section are two raised continual lines, running along each edge is a solid raised border. Projecting out from both sides is a side lug, this has a narrow neck and terminates in a rounded knop. After …
Created on: Friday 19th October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-9CCBF9

Record ID: BUC-9CCBF9
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman bow brooch of Hod Hill type dating to the 1st Century AD. At the head of the brooch is a trapezoidal shaped hinge with a rectangular notch in the centre, the pin is missing. Below this the bow extends, the first part of which is rectangular shaped. Running down the centre of this section is two lines of raised repeated squares, running along each edge is a solid raised border. Running across the centre of the section is a slight crack which has bent the brooch slightly. Projecting out on one side is a side lug, this is rectangular. At the end of the lug…
Created on: Friday 19th October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-9C6ADB

Record ID: BUC-9C6ADB
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman bow brooch of dolphin type dating to the 1st Century AD. The head of the brooch has two wings projecting out from the base of the bow, one of which is very worn and broken, and only a small part remains. The other wing is worn and broken on the end. There is a slight rectangular projection in the centre of the wings which holds the end of the spring mechanism. The underside of the wings contains the spring mechanism, this consists of copper alloy wire curled into loops. This is corroded. The bow of the brooch arches upwards slightly before curving down …
Created on: Friday 19th October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-9B4C86

Record ID: BUC-9B4C86
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman plate brooch dating to the 2nd Century AD. The brooch is zoomorphic, and is in the shape of a rabbit or hare. The animal has a long thin head to the right, with a long snout. There is an incised line down the centre of the snout representing the mouth. The head widens slightly towards the body, in the centre of the head is a circular indentation representing the eye. The ovoid shaped ear projects out behind the head, as if the animal was running. Running across the centre of the ear is a groove. The brooch widens out into the neck, before widening furth…
Created on: Friday 19th October 2018
Last updated: Tuesday 12th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-88B188

Record ID: BUC-88B188
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman plate brooch dating to AD 80-150. The plate is rectangular in shape, with a solid raised border running around the edge. There is a semi circular raised curve running across the length of the plate, inside the curve is a circular shape. Inside this is a light blue coloured enamel. On the inside of the curve is patches of dark blue enamel, with the surface of the light green copper alloy patina showing through. On the outside of the curve there is a white and light blue patch of enamel on one side, the other side is worn. The decoration seems to resemble…
Created on: Thursday 18th October 2018
Last updated: Tuesday 12th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-745144

Record ID: BUC-745144
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman bow brooch, of Hod Hill type, dating to the 1st century AD. The head of the brooch consists of the two wings extending out from the centre, they are worn and consist of a thin sheet of copper alloy. There is a triangular notch in the centre, and brown orange staining across the wings. The pin is now missing, but would have originally been attached by a hinge. The bow arches out from the head, and is a rectangular strip. Running down the centre are two raised lines with repeated notches. Running along the edge either side are rounded triangular projecti…
Created on: Wednesday 17th October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-7392C7

Record ID: BUC-7392C7
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman bow brooch, dating to the late 1st century AD, of bow and fantail type. The head of the brooch consists of the two wings extending out from the centre, these are circular in shape. In the centre is a notch, where the pin is curved round to create a hinge, most of the pin is missing. There is iron staining across the two wings in patches, and contained within the notch, suggesting the pin was iron. At the end of each wing there is an incised border running around the circumference. Along the top of the bow where it connects to the head there is a raised …
Created on: Wednesday 17th October 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-5F0E22

Record ID: BUC-5F0E22
Object type: ARROWHEAD
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A wrought iron arrowhead of medieval date, AD.1200-1550. The object is formed of a round socket that makes up the majority of the object's length. The tip of the arrowhead has a diamond shaped cross section. There is a slight waist where the tip meets the socket, however, the maximum width of the tip does not exceed that of the socket. Jessop 1996 type M3 Arrowheads of this type are typically 'military' in nature though they would serve equally in hunting. They were produced rapidly and in their thousands particularly during the 15th and early 16th century. They are often termed 'shor…
Created on: Tuesday 16th October 2018
Last updated: Friday 26th October 2018
Spatial data recorded.


  • Thumbnail image of BUC-5E4BF8

Record ID: BUC-5E4BF8
Object type: STRAP END
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy strap end dating from the medieval period dating to c.14th Century AD. The strap end is of split end type, with a copper alloy rivet holding the two plates in place. The strap end is rectangular in shape, and narrows slightly towards the terminal end. The terminal end is a solid rectangular knop with incised diagonal notches. There is a narrow neck connecting this to the main body of the strap end. There is no decoration on the reverse of the strap end, which measures 46.5mm in length, 8.5mm in width, 2.8mm in thickness, and 3.66g in weight. The strap end has a …
Created on: Tuesday 16th October 2018
Last updated: Friday 26th October 2018
Spatial data recorded.


  • Thumbnail image of BUC-5AD6C8

Record ID: BUC-5AD6C8
Object type: COIN
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of Constantine II (AD 337-361). The obverse has a radiate crowned and cuirassed bust facing left. The legend reads CO[NSTAN]T[INVS] IVNN[C]. The reverse has a globe on an altar inscribed VOT/IS/XX with three stars above and in exergue is PLON. Reverse legend [BEA]TA TRA[NQVILIAS]. RIC VII p112 No236
Created on: Tuesday 16th October 2018
Last updated: Friday 26th October 2018
Spatial data recorded.


  • Thumbnail image of BUC-73C7A1

Record ID: BUC-73C7A1
Object type: COIN
Broad period: POST MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A post medieval silver half groat of Charles I (AD1625-1649) dating from 1632-3. Harp initial mark. The obverse is very worn and slightly abraded. The edges of the coin are worn away so that the full inscription is not present. North 1991, volume II, page 162 number 2255.
Created on: Friday 5th October 2018
Last updated: Friday 26th October 2018
Spatial data recorded.


  • Thumbnail image of NARC-4DABC3

Record ID: NARC-4DABC3
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete silver cut Halfpenny of Henry III (AD 1216-1272). Class 5. Voided long cross reverse with three pellets in each quadrant. Minted in Canterbury. AD 1251-1272. Length: 18.92mm, Width: mm, Thickness: 0.78mm, Weight: 0.5g. North Vol I, P 226, No 991-999.
Created on: Thursday 28th June 2018
Last updated: Wednesday 1st August 2018
Spatial data recorded.


  • Thumbnail image of NARC-4B36D1

Record ID: NARC-4B36D1
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy Strap Fitting or Belt Mount of Medieval date (AD 1200-1350). The object is sub rectangular in plan and slightly convex on the upper face with a concave back. The upper face is decorated with and incised linear pattern consisting of chevrons. In the centre of the retained portion of the object is a circular perforation with a partially retained rivet. The back of the object is undecorated and retains a small amount of the perforation rivet. The metal is dark green in colour with a smooth patina. Length: 15.84mm, Width: 10.82mm, Thickness: 2.23mm, Weight: 0.9g.
Created on: Thursday 28th June 2018
Last updated: Wednesday 1st August 2018
Spatial data recorded.


  • Thumbnail image of BUC-23F078

Record ID: BUC-23F078
Object type: AWL
Broad period: BRONZE AGE
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy possible awl of uncertain date, possibly dating to the Bronze Age - Medieval period, 2000BC - AD.1100. The object is a single cast chisel with a flat bladed terminal that widens towards the middle of the piece before tapering down to a point which is now worn. There is no decoration on the object and it has an dark red brown patina. Small chisels and tools of this type were used for an extensive period of time, not simply in the bronze age, but also in later periods for jewellery making and fine work. As such dating the object is difficult. The awl measures 5…
Created on: Tuesday 26th June 2018
Last updated: Tuesday 26th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-23CDB7

Record ID: BUC-23CDB7
Object type: BUCKLE
Broad period: UNKNOWN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy possible buckle frame, dating from the Roman to medieval period, AD 200 - 1500. The fragment consists of the outer edge and one of the sides of the frame. The outer frame widens and is angled, it is decorated with four ring and dot punched motifs. The frame narrows along the side and ends in a rounded knop. It is worn and it is unclear if there is a break where a possible pin bar may have been originally attached. On the opposite edge there is a worn break just as the outer frame starts to narrow. There is no decoration on the reverse. The frame has a dark gr…
Created on: Tuesday 26th June 2018
Last updated: Tuesday 26th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-237578

Record ID: BUC-237578
Object type: BUCKLE
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A fragment of medieval copper alloy plate, possibly from a buckle, possibly dating to c.1270-1350. The plate is rectangular in shape, with a floral incised design on one side. The design is a four double oval petalled flower, with a pellet border running around the edge of the plate. One of the narrower edges has been folded over to the opposite side, before the fold is a wavy pellet border. The opposite edge has an irregular worn break, and there are also cracks and notches running across the surface of the plate. The reverse of the plate is undecorated. The fragment has a dark green …
Created on: Tuesday 26th June 2018
Last updated: Tuesday 26th June 2018
Spatial data recorded.


  • Thumbnail image of NARC-7814B5

Record ID: NARC-7814B5
Object type: SPOON
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Published Find published
An incomplete copper alloy spoon of Roman date (AD 43-410). The object is a mandolin-shaped spoon of Crummy 1983, Type 3. The handle is missing. The spoon would have originally consisted of two pieces. The bowl is circular in shape, narrowing into a neck, then widening again to facilitate the attachment of a handle (now missing). The top edge of this has a single rectangular projection above a triangular wedge on the rear surface. The spoon and the neck are shallowly concave rising to the flattened rim. The bowl is a shallow D shape in cross section. Across the surface of the spoon on …
Created on: Monday 18th June 2018
Last updated: Thursday 29th November 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 2,757
Search server index: valhalla

You are viewing records: 121 - 140.

Search statistics

  • Total quantity: 6,580
  • Mean quantity: 2.408
  • Maximum: 1,470

Filter your search

121 - 140 of 2,757 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.