Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Milton Keynes
    • Page: 6

  • Thumbnail image of BUC-54DA3E

Record ID: BUC-54DA3E
Object type: BADGE
Broad period: POST MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A post medieval to modern badge or fitting, dating from c. AD 1500-1900. The badge has a coat of arms in the centre, with a male figure to the left and a female figure to the right. Above the shield is a crenulsted turret, from which an arm holding an object projects. Below the coat of arms is a scroll with lettering on, it is unclear what this is. From the female figure's waist an attachment pin projects, this extends outwards before curving round and folding back on itself. It partly crosses the badge, and ends in a rounded terminal. On the reverse of the badge are three looped attac…
Created on: Wednesday 21st November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-54915D

Record ID: BUC-54915D
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete post medieval copper alloy strap or belt fitting, dating to 1550-1700. The fitting is S shaped, both ends are decorated with a bird or swan's head. The head consists of an incised oval eye and raised moulded brow each side, with a rounded triangular beak. Moulded crescents run down the neck of the bird to represent feathers, these are worn. In the centre of the fitting there is a raised moulded double collar running around the circumference of the fitting. On either side of this is a trefoil projection, most likely representing the wings. This decoration is repeated on the o…
Created on: Wednesday 21st November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-543579

Record ID: BUC-543579
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete early medival copper alloy strap end, dating to c. AD 740-1100. The strap end is split end, and is triangular shaped narrowing towards the terminal end. At the wider splt end there is a central circular rivet holding the two sheets together. This edge is worn and broken, with one corner missing and the other folded over on the front sheet. On the other sheet one corner is missing. The strap end narrows to a zoomorphic terminal, which has a rounded snout. Above this are two oval hollows representing eyes, and two raised triangular ears. The strap end is very worn, and no othe…
Created on: Wednesday 21st November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-53E175

Record ID: BUC-53E175
Object type: FINGER RING
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete but medieval copper alloy finger ring, dating from c. AD 1150-1450. The hoop is circular shape. The outside of the loop is decorated with a repeated rounded bead design. The hoop is D shaped in cross section. The finger ring has a dark red brown patina, with patches of light green, and measures 25.5mm by 26.1mm, 3.2mm in thickness, and weighs 2.38g. Similar finger rings can be seen in Egan and Pritchard 1991, page 331, numbers 1627 and 1629.
Created on: Wednesday 21st November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-40876D

Record ID: BUC-40876D
Object type: AXEHEAD
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete Roman iron axe head, dating from c. 1st to 2nd century AD. The head is triangular in shape, with the lower edge of the blade curving downwards creating a wide cutting edge. There is a rectangular perforation at the wider end of the head where the handle would have attached. The axe is a dark red brown colour, and measures 132.6mm in length, 51.7mm in width and weighs 320g. Manning 1985 plate 7; B2
Created on: Tuesday 20th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-406D7D

Record ID: BUC-406D7D
Object type: HAIR PIN
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Published Find published
A complete copper alloy Roman hair pin, dating to c.1st to 2nd Century AD, group 6. The pin has a flat discoidal head, on the top there is an incised cross. the underneath curves into a narrow neck, this then widens out into a rounded triangular shape. The pin then narrows again, and is then flanked by two raised collars. Below this the shaft of the pin extends, there is a bend just below, with a crack in the centre of the shaft. The shaft gradually narrows to a blunt point. The pin has a mid green patina, and measures 103.1mm in length, 7.8mm in width, and weighs 6.43g. C.f. Cool 199…
Created on: Tuesday 20th November 2018
Last updated: Wednesday 9th January 2019
Spatial data recorded.


  • Thumbnail image of BUC-401B71

Record ID: BUC-401B71
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Published Find published
An incomplete Roman copper alloy Colchester derivative, double pierced lug, Harlow type brooch dating to 43-100 AD. The wings are still in situ, these are C shaped in cross section. The spring would have sat inside the wings coiled in a circular shape, this is now missing. The bow of the brooch curves downwards from the head of the brooch, it is T shaped in cross section with a central ridge. The ridge becomes higher at the head of the brooch, with two circular projections in the centre of the reverse to hold the spring. There is a notch in the ridge before this. The bow narrows and cu…
Created on: Tuesday 20th November 2018
Last updated: Wednesday 3rd April 2019
Spatial data recorded.


  • Thumbnail image of BUC-3F14D4

Record ID: BUC-3F14D4
Object type: FIGURINE
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy, Probably Roman, figurine in the form of a hoof, AD.43-410. The object is in the form of the lower leg of a hoofed animal, possibly a goat or ram. The base of the hoof has two grooves in a V shape giving it a cloven appearance rather than the U shape of a horse. The object has an even green patina. Length: 18.48mm Width: 7.28mm Thickness: 4.26mm Weight: 3.31g
Created on: Tuesday 20th November 2018
Last updated: Friday 4th January 2019
Spatial data recorded.


  • Thumbnail image of BUC-3EAEC4

Record ID: BUC-3EAEC4
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An imcomplete Roman copper alloy T shaped brooch dating to c. 1st - 2nd century AD. The wings are still in situ, these are circular shaped in cross section, the ends are worn. On the underneath is a rectangular notch where the hinge of the pin would have sat. This now contains corrosion. On the top is a circular attachment loop, this is broken and worn, and only a small part of it remains. It is attached to the top of the bow by a rectangular neck. The bow has two sections. The first section is rectangular, and is divided into two rectangular panels. In both of these there are indent…
Created on: Tuesday 20th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-3E33BC

Record ID: BUC-3E33BC
Object type: MOUNT
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete, Roman, copper alloy, belt fitting, AD.300-450. The object comprises a rectangular plate with two rivet holes pierced through it. At one end of the object is a narrow strip that has been bent over to form a suspension loop. This terminates in a square tab which is pierced by a single rivet hole. The front of the plate has two parallel lines running down its length, these lines are the same width apart as the tab forming the loop. The object has an even green patina. Similar examples in Nicolay 2007, pl.45, no.100.7 and 100.9. these are associated with later military belts.
Created on: Tuesday 20th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-3D6875

Record ID: BUC-3D6875
Object type: MOUNT
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy, Roman, openwork, belt mount, AD.120-250. The object comprises the corner of a rectangular openwork mount, It is L shaped with worn breaks. Much of the interior design has been lost, with only two fragments of the curvilinear design remaining. One of the curved design fragments creates a small trapezoidal openwork section. The back of the piece is undecorated except for a single worn rivet positioned near one of the breaks. Similar examples can be seen in Nicolay 2007, dating to his period 3, AD.120-250, pl.40 no.14.23, 302.1, 209.17. These are associated …
Created on: Tuesday 20th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-3D37B7

Record ID: BUC-3D37B7
Object type: MOUNT
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, copper alloy, Roman, leather mount, probably from a horse harness, AD.120-250. The object comprises a circular disc with a central boss, surrounded by a shallow recess which is bordered around the outer edge with a raised border. This is the same height as the central boss. The recess would probably have held enamel. The mount has a concave back, created by a flange that runs around the edge of the object, angled backwards. In the centre of the back is a single projecting rivet. Similar mounts and studs can be seen in Nicolay 2007, 382 pl.71 no.227.72, 51.4. Nicolay dat…
Created on: Tuesday 20th November 2018
Last updated: Tuesday 27th November 2018
Spatial data recorded.


  • Thumbnail image of BUC-2D5177

Record ID: BUC-2D5177
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An inconplete Roman copper alloy Colchester derivative, double pierced lug, Harlow type brooch dating 43-100 AD. The wings are still in situ, these are C- shaped in cross section. The spring sits inside the wings coiled in a circular shape,and is copper alloy wire. One long piece of wire curves round the top of the spring, and sits in a circular perforation on the top of the head. The bow of the brooch curves downwards from the head of the brooch, it is T shaped in cross section with a central ridge. The ridge becomes higher at the head of the brooch, with a circular projection in the …
Created on: Monday 19th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-2C800C

Record ID: BUC-2C800C
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Iron Age bow brooch dating to the 1st century BC. At the head of the brooch is the spring, this consists of three coils, at the end of one end there is a worn break. The broken coil wraps round the base of the other two, before circling round to sit next to them. The bow of the brooch extends outwards from the spring, then curves at ninety degrees before extending and narrowing to a worn break at the foot. Above the curve the bow is D shaped in cross section. Just after the curve there is moulded decoration. The central element is a bulbous section, flanked b…
Created on: Monday 19th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-2B94CA

Record ID: BUC-2B94CA
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman Colchester derivative, double pierced lug, Harlow type brooch dating from the 1st century AD. The wings extend out either side of the head of the bow, and are a rounded rectangular shape in cross section. The spring of the brooch is now missing, but would have sat underneath the wings. There is a raised ridge at the head of the brooch, starting with a narrowed point on the top of the bow and extending out past the wings in a circular projection. In the centre of the projection is a circular perforation where the spring would have attached, this now contains corrosi…
Created on: Monday 19th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-2A6F25

Record ID: BUC-2A6F25
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman brooch of Hod Hill type, dating to the 1st century AD. The brooch is hinged, with a rectangular notch in the centre of the head. Extending out of this slightly is the remains of the pin, which is broken and worn. The wings project out from the centre, and are oval in cross section. The head then narrows gradually into the bow which has iron staining across it. After this there is a central rectangular section that then narrows slightly towards the foot of the brooch. This section has a central raised ridge which has been slightly distorted, with the edg…
Created on: Monday 19th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-EDB59E

Record ID: BUC-EDB59E
Object type: BRACELET
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy bracelet decorated with multiple motifs dating to the Roman period (200-410 AD). The bracelet has incised lines along the edges of the fragment with small ring and dot decoration contained within. There is a larger ring with dot in the centre at the terminal end of the fragment collared by a border of two incised lines. There is evidence of another collared decoration at the opposite end of the fragment which terminates in a worn break. The object has a dark green patina, and measures 30.89mm in length, 5.92mm in width, 2.69mm in thickness and weighs 5.47g. …
Created on: Friday 16th November 2018
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-EAD553

Record ID: BUC-EAD553
Object type: BROOCH
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman Hod Hill brooch with side lugs dating from AD 43-75. The fragment consists of the bow of the brooch, the head, pin and catch plate are missing. The main section of the bow is trapezoidal in shape, with three ridges running down the centre. Contained within the ridges are traces of black residue, this is possibly enamel. Along the narrow edge of the section is a rectangular projection, this is possibly the neck leading to the head of the brooch. It is now worn and broken and has traces of black residue. Projecting out either side of the main section is a…
Created on: Friday 16th November 2018
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-E9DEB6

Record ID: BUC-E9DEB6
Object type: COIN
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman nummus of Crispus dating to AD 317-326, Reece period 16. the obverse has a right facing laureate bust which is draped and cuirassed. The reverse is a wreath enclosing VOT/X. The mint mark is illegible.
Created on: Friday 16th November 2018
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-B49CF6

Record ID: BUC-B49CF6
Object type: MOUNT
Broad period: ROMAN
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, copper alloy, Roman, mount, AD.120-250. The mount is circular with a central boss, surrounded by a recessed area that is subdivided by three raised triangular dividers arranged in a propellor pattern. Around the edge is a raised border. The back of the mount has a single central rivet that has been bent over during attachment. SImilar mounts with differing internal designs can be found in Nicolay 2007, pg.382 pl.71 Type B2 Height: 3.93mmThickness: 2.2mmWeight: 0.9gDiameter: 10.82mm
Created on: Tuesday 13th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 2,786
Search server index: valhalla

You are viewing records: 101 - 120.

Search statistics

  • Total quantity: 6,609
  • Mean quantity: 2.393
  • Maximum: 1,470

Filter your search

101 - 120 of 2,786 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.