Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Milton Keynes
    • Broad period: MEDIEVAL

  • Thumbnail image of NARC-DA2D92

Record ID: NARC-DA2D92
Object type: BUCKLE
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete gilded copper alloy Buckle of Medieval date (AD 1250-1400). The object is a single loop buckle with a decorative integral plate. The frame is oval with a notched lip and a perforation within which is a wire pin. The plate is wasted with a pointed end and two rivet holes. There is a transverse ridge between the rivet holes. The plate is decorated along the upper and lower ends with oblique lines and punched dots on the transverse ridge. A large amount of gilding has been retained on both sides of the object. The metal has a light green pitted patina. Length: 33.72mm, Width…
Created on: Friday 8th February 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-045BBD

Record ID: BUC-045BBD
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy medieval seal matrix, dating from c. AD 1200-1400. The seal face is round in shape, with the die depicting a central IHC surmounted by an altar and cross. Running around the edge of the seal face is the inscription 'IESVS?ASE?E ' . The seal extends up into the handle which is a hexagonal shape in cross section. The attachment loop is trefoil shaped, with three raised oval collars below, the central one is in higher relief to the others. The seal matrix is a grey brown colour, and measures 23.7mm in length, 19.3mm in diameter, and weighs 9.09g.
Created on: Tuesday 29th January 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-F11A8D

Record ID: BUC-F11A8D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy medieval buckle, dating to c. AD 1250-1400. The buckle is rectangular in shape, with a rounded knop on each corner. In the centre of the outer frame is a rectangular notch with raised sides for holding the now missing pin. There are incised diagonal lines decorating the frame, which is sub triangular in cross section. The reverse is flat. The buckle plate is rectangular in shape, with moulded openwork decoration. In the centre of three of the edges are moulded crescents, these are flanked either side in the corners by moulded leaf designs. The plate folds over …
Created on: Monday 28th January 2019
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-EF4FF9

Record ID: BUC-EF4FF9
Object type: BUCKLE
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy medieval buckle and plate dating from c. AD 1350-1400. The buckle frame is rectangular in shape, the outer frame is rounded and oval in cross section with a bevelled inside edge.The rest of the frame is D shaped in cross section. The buckle plate consists of a sheet of copper alloy folded over the pin bar. There is an oval notch in the centre beside the pin bar where the pin sits, this is a piece of copper alloy that is wrapped round the pin bar. It narrows to a point at the terminal end and is D shaped in cross section. The buckle plate is worn and broken, and…
Created on: Monday 28th January 2019
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-EF0608

Record ID: BUC-EF0608
Object type: BUCKLE
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy D shaped medieval single loop buckle, with buckle plate attached, dating to 1350-1400. The loop of the buckle projects out in an arch shape from the pin bar, which is recessed and squared at each end. The outer loop has moulded decoration projecting out from the centre, with rounded projections at each end and four ridges along this section. This creates notches in which the pin can sit. The frame is D shaped in cross section. The buckle plate is formed of a rectangular sheet of copper alloy that wraps around the the pin bar. There is a rectangular notch bes…
Created on: Monday 28th January 2019
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-B294B5

Record ID: BUC-B294B5
Object type: MOUNT
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy medieval bar mount dating from c.AD 1350-1400. The bar mount is quartrefoil in shape. It has moulded decoration with a raised square with a circular indentation in the centre. Surrounding this on all four sides are circular sections with a raised six pointed star in each. In each corner of the quartrefoil is a rounded projection. The bar mount projects outwards on both sides with a double collared rounded end with elongated knop. There is a circular rivet hole in each. The rivets are seperate and now missing. The mount has a dark green patina, it measures 45.1…
Created on: Friday 25th January 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-B02425

Record ID: BUC-B02425
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval cut half long cross penny of Edwardian type, dating to c. AD 1272-1377. Mint of Canterbury. The coin is worn.
Created on: Friday 25th January 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-AFFD04

Record ID: BUC-AFFD04
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval penny, possibly of Henry VI or Edward IV, dating to AD 1422-1483. Mint of York, the coin possibly has a D in the centre of the reverse long cross. The coin is clipped, and most of the inscription is missing. It is oval shaped.
Created on: Friday 25th January 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-AFA469

Record ID: BUC-AFA469
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval penny of Henry VI (AD 1422-1461) dating to AD 1427-1430. Mint of York. North 1991, volume II, page 76 number 1451iii. The coin is worn and broken, and has a crack running across one of the edges.
Created on: Friday 25th January 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-AF39FC

Record ID: BUC-AF39FC
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval penny of long cross Edwardian type, dating from AD 1279- 1489 Mint of London. The coin is oval shaped, worn and broken.
Created on: Friday 25th January 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-AED5F2

Record ID: BUC-AED5F2
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval penny of Edward III (AD 1327-1377)/ This is possibly 'florin type', third coinage dating to c. AD 1344-1351, type 4. Mint of London. North 1991 volume II, page 47, number 1116.
Created on: Friday 25th January 2019
Last updated: Friday 8th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-0B8D2B

Record ID: BUC-0B8D2B
Object type: JETTON
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A medieval copper alloy pictorial issue jetton, dating to c 1345-1355. The obverse has a star un crescent, with strokes and pellets in the border. The reverse is a long cross patonce, with five pellets in each quarter. Mitchiner 1988, page 117, numbers 245-246.
Created on: Monday 24th December 2018
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-CDDF74

Record ID: BUC-CDDF74
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A medieval silver voided long cross cut half coin dating from c.AD 1247-1279. It has three pellets in each quarter. The legend and ruler are uncertain.
Created on: Friday 21st December 2018
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-290A44

Record ID: BUC-290A44
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, copper alloy, medieval, 13th century, harness pendant, AD.1200-1400. The object comprises two hinged pendants attached at a single point by a hinge. The upper pendant is cruciform in shape with four equal length arms. The centre of the cross is pierced with a single perforation, this is set through a raised square. Moving down each arm away from the centre the decoration is formed of a single transverse collar separated from the central square by a narrow trough. Below each collar there is a short undecorated space that forms the neck of a large zoomorphic terminal. Each…
Created on: Thursday 13th December 2018
Last updated: Friday 28th December 2018
Spatial data recorded.


  • Thumbnail image of BUC-D6335C

Record ID: BUC-D6335C
Object type: STRAP END
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy medieval strap end, dating from c. AD 1300-1400. The strap end would have originally been formed of two plates, one of which is now missing. The plate is sub rectangular in shape, narrowing from the attachment edge to the terminal which is triangular with a central rounded point. The plate has been folded twice across itself, and is worn. The plate is decorated with an incised zoomorphic design depicting an animal, possibly a mythical creature or a wyvern. The creature has it's head at the narrow end of the plate, which is turned and facing back. The head ha…
Created on: Tuesday 27th November 2018
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of BUC-53E175

Record ID: BUC-53E175
Object type: FINGER RING
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete but medieval copper alloy finger ring, dating from c. AD 1150-1450. The hoop is circular shape. The outside of the loop is decorated with a repeated rounded bead design. The hoop is D shaped in cross section. The finger ring has a dark red brown patina, with patches of light green, and measures 25.5mm by 26.1mm, 3.2mm in thickness, and weighs 2.38g. Similar finger rings can be seen in Egan and Pritchard 1991, page 331, numbers 1627 and 1629.
Created on: Wednesday 21st November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-40876D

Record ID: BUC-40876D
Object type: AXEHEAD
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete Roman iron axe head, dating from c. 1st to 2nd century AD. The head is triangular in shape, with the lower edge of the blade curving downwards creating a wide cutting edge. There is a rectangular perforation at the wider end of the head where the handle would have attached. The axe is a dark red brown colour, and measures 132.6mm in length, 51.7mm in width and weighs 320g. Manning 1985 plate 7; B2
Created on: Tuesday 20th November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of BUC-2FCEBC

Record ID: BUC-2FCEBC
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A medieval sterling silver issue farthing of Edward I, dating to AD 1272-1307. Mint of London. Withers type 14-19.
Created on: Friday 26th October 2018
Last updated: Friday 26th October 2018
Spatial data recorded.


  • Thumbnail image of NARC-2E8FDB

Record ID: NARC-2E8FDB
Object type: BOLSTER
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Bolster from a Scale Tang Knife, of Medieval to Post Medieval date (AD 1200-1600). The object is rectangular in shape, with a rectangular cross section. The long sides have a central ridge. The short sides each have a rectangular notch removed from the top. The top of the end cap has a rectangular slot cut into it, with slightly diagonal lines. .The base has a sub rectangular central hole. No decoration is present however three linear incisions are located on one of the longer sides, possible due to post depositional processes. The slots would have accommodated …
Created on: Friday 26th October 2018
Last updated: Wednesday 7th November 2018
Spatial data recorded.


  • Thumbnail image of NARC-1D6F7D

Record ID: NARC-1D6F7D
Object type: COIN
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation Find awaiting validation
A complete silver cut Halfpenny of Henry III (AD 1216-1272). Class 7a. Short cross reverse with quatrefoil in each quadrant. Minted by Ravlf in London. AD 1217-1222. Length: 22.97mm, Width: 9.88mm, Thickness: 3.89mm, Weight: 3.3g. North Vol I, P 222, No 978.
Created on: Thursday 25th October 2018
Last updated: Wednesday 7th November 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 486
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 619
  • Mean quantity: 1.274
  • Maximum: 101

Filter your search

1 - 20 of 486 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.