Record ID: LANCUM-6DB595
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Very small cast cu-alloy flat axe dating from the 3rd millenium BC. The axe has not been seen by the FLO; it was reported via email and the images kindly supplied by the finder.
Created on: Thursday 30th August 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-5B2C76
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Bronze Age palstave axe dating from the Wilburton or Penard phases, c.1300-1000 BC. It is mostly complete although the upper part is so worn that no flanges remain and it ends in a rounded point. The stop is still visible on both sides although one side is much more worn than the other. Below the stop on the least worn side, 3 raised vertical ribs can be seen. The blade is mostly complete although it is slightly uneven and it is possible the cutting edge has broken off. There was possibly a side loop on one side where something can be seen but it is not clear due to the amount of wear…
Created on: Monday 27th April 2009
Last updated: Tuesday 12th October 2021
Spatial data recorded. This findspot is known as 'Ormskirk Area', grid reference and parish protected.

Record ID: LANCUM-E6D931
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Cast cu-alloy socketed axe dating from the Late Bronze Age, i.e. c. 1000-800BC. The axe is complete and in very good condition with a chocolate-brown patina and a smooth surface. There is only some bronze disease on the inside of the socket. An area of corrosion mixed with soil is on the inside of the socket: it cannot be removed. The axe has a small loop at one side. It is roughly circular in cross-section with three facets on each face. The two outer facets have also facets, but they are less pronounced. Other than that there is no further decoration except for a long collar. The bl…
Created on: Thursday 25th November 2010
Last updated: Thursday 25th November 2010
Spatial data recorded. This findspot is known as 'Carnforth', grid reference and parish protected.

Record ID: LANCUM-B39815
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Cast cu-alloy flanged axe dating from the Middle Bronze Age, i.e. ca. 1400-1250 BC. This flanged axe is part of the Taunton metalwork assemblage, when winged axes are more common in Northern England. There is a lozenge/oval shaped flange on each side of the butt end. The outer side of each flange is slightly convex, resulting in the gap between the flange crests narrowing at the top above the septum. The blade tip is crescent shaped and there are very faint hammer marks and striations from repeated sharpening of the axe. There is no obvious damage to the butt, body, wings or blade. Th…
Created on: Tuesday 5th April 2011
Last updated: Wednesday 1st June 2011
Spatial data recorded. This findspot is known as 'Lancaster', grid reference and parish protected.

Record ID: LVPL-C31844
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A fragment of copper alloy, probable casting waste, possibly of Bronze Age dating (2150 BC to 800 BC). However, due to the lack of context and continuation of casting styles, this fragment could be dated from the Bronze Age through to the Roman Period (c.2150 BC - 410 AD). The fragment is sub triangular in plan, and roughly D shaped in cross section. It has an irregular, rough surface. It is most likely part of a copper ingot, prior to being smelted and cast. It is a mid to dark green colour. A couple of small areas of iron staining, probably due to impurities in the copper. An e…
Created on: Wednesday 6th April 2011
Last updated: Tuesday 12th July 2011
Spatial data recorded.

Record ID: LANCUM-0AD956
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Probably a large fragment of a miscast spearhead dating from the Middle or Later Bronze Age, i.e. c. 1250-800BC. Only the miscast socket remains and it is not certain if the spearhead was ever cast complete. The fragment is wider at the base and narrows towards the top, before flaring out again slightly at the very top. There is a hole in one side and a curved break on the edge of the socket, but there is no evidence of peg holes. It looks as if the alloy that was used to make this spearhead was too thick or lumpy to fill out the mould properly and thus, only a very crude socket was c…
Created on: Thursday 10th June 2010
Last updated: Tuesday 18th May 2021
Spatial data recorded. This findspot is known as 'Morecambe area', grid reference and parish protected.

Record ID: LANCUM-0B4260
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A fragment of a cast copper alloy casting or smelting waste, probably dating from the Middle or Late Bronze Age, i.e. c. 2000-800BC. It is likely that this is a fragment of a cu-alloy 'cake', ie the cu-alloy residue left over from the smelting process. This would then be broken into smaller pieces that various different artefacts can be cast from. Cake fragments such as this are a rare find for North West England. They are much more common in East Anglia as both single finds and in Late Bronze Age metalwork hoards. Dimensions: length: 42mm, width: 29mm, thickness: 22mm and weight: 86.24g.
Created on: Thursday 10th June 2010
Last updated: Thursday 20th January 2011
Spatial data recorded. This findspot is known as 'Morecambe area', grid reference and parish protected.

Record ID: LANCUM-0B61F3
Object type: AXE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A fragment of a cast copper alloy casting or smelting waste, probably dating from the Middle or Late Bronze Age, i.e. c. 2000-800BC. It is likely that this is a fragment of a cu-alloy 'cake', ie the cu-alloy residue left over from the smelting process. This would then be broken into smaller pieces that various different artefacts can be cast from. Cake fragments such as this are a rare find for North West England. They are much more common in East Anglia as both single finds and in Late Bronze Age metalwork hoards. Dimensions: length: 27mm, width:13mm, thickness: 22mm amd weight: 19.4g.
Created on: Thursday 10th June 2010
Last updated: Thursday 20th January 2011
Spatial data recorded. This findspot is known as 'Morecambe area', grid reference and parish protected.

Record ID: LANCUM-0BB8A7
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Unidentified object or casting waste, possibly Late Bronze Age c. 1000-800BC. Object is long and narrow and has two distinct parts, this caused by corrosion. The forepart is tapered slightly and has a knob on the tip, whilst the hindpart looks to be square with a hole in the middle which does not go throught to the front of the object. These two parts are connected by a narrow bridge of metal. Dimensions: length: 40mm, width: 12mm, thickness: 7mm and weight: 9.15g.
Created on: Thursday 10th June 2010
Last updated: Thursday 20th January 2011
Spatial data recorded. This findspot is known as 'Morecambe area', grid reference and parish protected.

Record ID: LANCUM-0CA9F6
Object type: UNIDENTIFIED OBJECT
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Unidentified object, probably dating from the Late Bronze Age c. 1000-800 BC. The object is broken in two large fragments and some small pieces are missing. Other than that, it appear complete. It has a long, narrow and slightly tapered tube with transverse linear groove decoration and with a blunted point at one end, and an open dome at the opposite end. This object is in two fragments and seems to have been broken off where the tube was perforated by a slit or hole. There is another small hole on the tube just underneath the round open end. Unfortunately, even though the object is c…
Created on: Thursday 10th June 2010
Last updated: Thursday 20th January 2011
Spatial data recorded.

Record ID: LANCUM-0FD0F6
Object type: SWORD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
An incomplete cast copper alloy sword dating from the Late Bronze Age, i.e. ca. 1000-800BC. Only the lower part of the blade and tip remain. The surface is smooth and the edge of the sword bevelled. There is a very slightly ridge along the centre of the blade and the cross-section is a rounded diamond-shape. The sword probably belonged to the Ewart Park metalwork assemblage or possibly the earlier Wilburton metalwork assemblage, but it is impossible to date it any more closely without the hilt present. Dimensions: lenght: 177mm, width: 34mm, thickness: 4mm and weight: 128.71g.
Created on: Thursday 10th June 2010
Last updated: Thursday 20th January 2011
Spatial data recorded.

Record ID: LVPL-8E83D6
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
An incomplete blade fragment, probably from a cast copper alloy palstave, of Middle Bronze Age dating (1000 BC to 800 BC). It is likely to be from the Acton Park II industry. It measures 43.87mm long, 46.37mm wide and 10.20mm thick. It weighs 73.0 grams.
Created on: Friday 3rd June 2011
Last updated: Monday 31st October 2011
Spatial data recorded.

Record ID: LANCUM-597D63
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Cast copper alloy socketed tool, probably an axe, dating from the later Middle Bronze Age or the Late Bronze Age, c. 1300-800BC. The object is the lower half of a socketed copper alloy tool, possibly a socketed axe or another socketed bladed tool. The cross-section is rectangular and the walls are very thick. The sides of the implements are almost parallel and the blade very narrow. The only socketed axe type that would match this shape is Type Taunton-Hardemarschen, but this is a very southern English type and therefore unlikely. NB: the artefact was not seen by the FLO in perso…
Created on: Friday 30th September 2011
Last updated: Wednesday 29th March 2017
Spatial data recorded. This findspot is known as 'Gisburn', grid reference and parish protected.

Record ID: LANCUM-2FF232
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
An incomplete copper-alloy 'unlooped shield pattern' palstave dating to the middle Bronze Age 1500 - 1150BC from the ActonPark phase metalwork. The axe has a flared cutting edge and would have had a rectangular butt which is now broken with an irregular line suggesting that it was broken in antiquity. The axe has a shield-shaped undecorated hollow located on either side of the stop ridge. The sides of the butt are triangular in plan and there is no stop rib between the stop ridge and raised flange. The axe has a pronounced flare of the blade suggesting that it was broken not too long …
Created on: Monday 10th October 2011
Last updated: Tuesday 12th October 2021
Spatial data recorded. This findspot is known as 'WORSTON', grid reference and parish protected.

Record ID: LANCUM-37A3C5
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Tip of cast cu-alloy spearhead, very probably dating from the Middle or Late Bronze Age, i.e. 1500-800BC. Because of the size of the fragment, it is very difficult to say if the fragment dates from the Middle of Late Bronze Age. The surface shows a dark green patina, with patches of brown/red. The size and shape of the socket is unknown. The midrib seems to be of almost square or diamond-shaped cross-section. Find not seen by FLO; images kindly supplied by finder. Exact masurements and weight unknown (measurements below estimated from image).
Created on: Tuesday 8th July 2008
Last updated: Tuesday 18th May 2021
Spatial data recorded. This findspot is known as 'Burnley', grid reference and parish protected.

Record ID: LANCUM-6D5711
Object type: RING
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Solid cast cu-alloy ring, possibly dating from the Later Bronze or Iron Age or the Roman period, i.e. c. 1000BC-AD410. The ring is simple without any decoration. It was cast in a two-piece mould and not made from a bent cu-alloy rod. The surface is very smooth and the file marks from the filing of the inner casting seam are almost obliterated. There are no longer any indications of casting seams or file marks on the outside. The ring is in very good condition with a chocolate-brown patina and there is only very little stippling/pitting on the outer surface. Cu-alloy rings such as this …
Created on: Thursday 28th August 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Carnforth', grid reference and parish protected.

Record ID: LANCUM-8CCE11
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A Chalcolithic/early Bronze Age copper cake, c.2450-2150BC. The copper cake is associated with LANCUM-3BEC10. The cake represents early Bronze Age metal working activity. The patina is light green with reddish brown occasional inclusions and shows wear from being in the ground. The length is 97mm, width 61mm, thickness 11mm and weight too heavy for scales.
Created on: Monday 29th June 2009
Last updated: Thursday 17th December 2015
Spatial data recorded. This findspot is known as 'MORECAMBE BAY', grid reference and parish protected.

Record ID: LANCUM-8D1241
Object type: MANUFACTURE AND PROCESSING
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A possibly Chalcolithic/early Bronze Age copper cake, c.2450-2150BC. The copper cake is associated with LANCUM-3BEC10. May represent early Beaker metal working activity The patina is light green with reddish brown occasional inclusions and shows wear from being in the ground. The length is 112mm, width 55mm, thickness 9mm and weight too heavy for scales.
Created on: Monday 29th June 2009
Last updated: Wednesday 24th August 2011
Spatial data recorded. This findspot is known as 'MORECAMBE BAY', grid reference and parish protected.

Record ID: LANCUM-8D35E1
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A possibly Chalcolithic/early Bronze Age copper cake, c.2450-2150BC. The copper cake is associated with LANCUM-3BEC10. May represent early Beaker metal working activity The patina is light green with reddish brown occasional inclusions and shows wear from being in the ground. The length is 28mm, width 20mm, thickness 7mm and weight 8.75g.
Created on: Monday 29th June 2009
Last updated: Monday 21st October 2013
Spatial data recorded. This findspot is known as 'MORECAMBE BAY', grid reference and parish protected.

Record ID: LANCUM-8D57C1
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A possibly Chalcolithic/early Bronze Age riveting tool, c.2450-2150BC. The riveting tool is associated with LANCUM-3BEC10. May represent early Bronze Age metal working activity. The patina is light green. The length is 32mm, width 18mm, thickness 13mm and weight 25.06g.
Created on: Monday 29th June 2009
Last updated: Thursday 17th December 2015
Spatial data recorded. This findspot is known as 'MORECAMBE BAY', grid reference and parish protected.