Back to simple search | Back to advanced search

    You searched for:

    • Complete:Complete
    • County:Lancashire
    • Sort:updated
    • Direction:desc
    • Primary material:Flint
    • Show this many records per page:100

  • Thumbnail image of LANCUM-3F1C46

Record ID: LANCUM-3F1C46
Object type: ARROWHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A barbed and tanged arrowhead, formed by knapping. It is made of a pale semi- transluscent flint with some inclusions. It is slightly flatter on one side then the other, and the tip of one of the barbs is missing. Having been found near a beach it has been worn so no sharp edge remains, but the shape is consistent. Arrowheads such as these, see also NMGW-24C12C, are classified as Sutton Type B (Green 1980) are commonly associated with the emergence of the Beaker phenomenon in Britain. Dimensions: It is 21mm long and 16mm wide, it weighs 1.53g
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded.


  • Thumbnail image of LANCUM-A32091

Record ID: LANCUM-A32091
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to early Bronze Age grey brown flint thumbnail scraper fabricated from a tertiary flake. The scraping edge has been formed with semi-invasive, sub-parallel, semi-abrubt removals along the curved edge. A small gouge or burin has also been fashioned on one of the 'corners' of the flake. Dates to between c2700 to c1600 BC. Length 30mm, width 22mm, thickness 3.5mm, weight 4.80g.
Created on: Wednesday 14th December 2022
Last updated: Tuesday 10th October 2023
Spatial data recorded. This findspot is known as 'near Haslingden', grid reference and parish protected.


  • Thumbnail image of LANCUM-115358

Record ID: LANCUM-115358
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Early Bronze Age to early Iron Age secondary grey flint debitage retouched to a side scraper. Three phases of working. Initial phase produced the waste flake. The second phase, and first phase of retouch, incorporated acute, scaled, semi invasive reduction of a ridge on the left side of the dorsal face, and short, semi abrupt, sub parallel retouch on the curved right mesal. This phase of retouch has repatinated. At the distal end of this first phase of retouch, a projection, possibly originally a burin, has been reduced with short, abrupt, parallel retouch. Thi…
Created on: Tuesday 3rd May 2022
Last updated: Wednesday 1st February 2023
Spatial data recorded. This findspot is known as 'near Carnforth', grid reference and parish protected.


  • Thumbnail image of LANCUM-DA9AF5

Record ID: LANCUM-DA9AF5
Object type: PLANO CONVEX KNIFE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to early Bronze Age olive/grey flint plano convex knife, knapped on a secondary flake. Due to the way in which it has been knapped, the ventral is convex & the dorsal flat with a roughly central patch of retained cortex. There is extensive retouch to both faces. On the dorsal face the first phase is invasive, scaled, and low angle. The second dorsal phase is long, sub parallel, and low angle. There is also subsequent retouch to keep the edge sharp but this is more variable in character. The first phase of retouch on the ventral face is covering, scaled, stepped, para…
Created on: Sunday 15th June 2014
Last updated: Tuesday 18th October 2022
Spatial data recorded. This findspot is known as 'Laneshaw Bridge', grid reference and parish protected.


  • Thumbnail image of LANCUM-C5D881

Record ID: LANCUM-C5D881
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic to early Bronze Age retouched dark green/grey chert tool, probably a damaged end scraper. Dates to between c7000 and c1600 BC. Length 14mm, width 8mm, depth 3.5mm, weight 0.6g. Other lithics found in localised patches in the area by finder last year and by others throughout the last century or so.
Created on: Sunday 10th March 2013
Last updated: Wednesday 17th November 2021
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-31E02D

Record ID: LANCUM-31E02D
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to early Iron Age heat effected secondary grey flint debitage. There is no retouch on the large piece, but a small area of acutely angled, short, sub-parallel retouch on the smaller piece. There is no post burning working. Dates from c10,000 to c400 BC. 1 - The length is 20mm, width 15mm, thickness 13mm, and the weight is 3.70g. 2 - The length is 18mm, width 12mm, thickness 5mm, and the weight is 0.69g. Total weight 4.39g
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31E623

Record ID: LANCUM-31E623
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Iron Age dark grey flint tertiary debitage. No retouch, heat effected post working. The thermal shattering may be the result of the more complete piece of stone being used as a 'pot boiler'. These were stones heated on the fire then dropped into liquid to it. The cold fluid often caused the stone to shatter and break. Dates from c10,000 to c400 BC. The length is 20mm, width 16mm, thickness 5mm, and the weight is 1.57g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31F5D7

Record ID: LANCUM-31F5D7
Object type: CORE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic pyramidal core, heat effected secondary patinated white flint. It has been heat effected after the first phase of flake removals. The second phase has a 'fresher' patina and no heat crazing on the flake scars. There is no retouch. Dates from c10,000 to c4000 BC. The length is 20mm, width 12mm, thickness 11mm, and the weight is 1.77g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31E7E9

Record ID: LANCUM-31E7E9
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to mid Bronze Age secondary dark grey flint debitage. Scaled semi-abrupt short retouch to form a scraper, and another area of scaled semi-invasive and short abrupt retouch to create a gouge. Dates from c2700 to c1000 BC. The length is 19mm, width 14mm, thickness 3mm, and the weight is 0.79g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31E9B3

Record ID: LANCUM-31E9B3
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Tertiary grey chert debitage, probably Bronze Age. Small area of sub-parallel acute short retouch. Dates from c2350 to c1000 BC. The length is 21mm, width 18mm, thickness 5mm, and the weight is 1.77g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31EAF4

Record ID: LANCUM-31EAF4
Object type: BLADE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Neolithic tertiary grey chert blade. Parallel short acute retouch to the longer mesal, probably to form a cutting edge. Dates from c10,000 to c2350 BC. The length is 32mm, width 15mm, thickness 6mm, and the weight is 2.00g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31EDC3

Record ID: LANCUM-31EDC3
Object type: BLADE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to early Neolithic tertiary pale grey flint blade. Retouch to both mesals, possibly for use as a small knife. Very fine parallel semi-abrupt and short retouch on one edge, random short semi-acute to semi-parallel on the other. Dates from c10,000 to c3500 BC. The length is 22mm, width 9mm, thickness 3mm, and the weight is 0.50g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31EF00

Record ID: LANCUM-31EF00
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Neolithic to mid Bronze Age tertiary pale grey flint debitage. Small areas of parallel short semi-acute retouch on mesals, possibly for use as side scrapers and/or cutting edges. Dates from c4000 to c1000 BC. The length is 19mm, width 12mm, thickness 4mm, and the weight is 0.68g
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31D61D

Record ID: LANCUM-31D61D
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Bronze Age secondary grey flint debitage, possibly from core preparation. Random acute short retouch to one edge, probably for use as a scraper. Dates from c10,000 to c800 BC. The length is 25mm, width 15mm, thickness 9mm, and the weight is 3.13g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31F307

Record ID: LANCUM-31F307
Object type: BURIN
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic to early Neolithic secondary grey flint burin. There has been extensive retouch to one of the proximal corner to form a burin. Dates from c7000 to c3500 BC. The length is 12mm, width 8mm, thickness 3mm, and the weight is 0.45g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31D9EC

Record ID: LANCUM-31D9EC
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Neolithic patinated tertiary grey flint end scraper. The scraper is on the distal end and there are two stages of sub-parallel abrupt retouch, short on semi-invasive, and some damage from crushing. Dates from c4000 to c2350 BC. The length is 21mm, width 13mm, thickness 5mm, and the weight is 1.42g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31F0E6

Record ID: LANCUM-31F0E6
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mid Mesolithic to early Neolithic tertiary grey flint debitage. Possible retouch to one mesal. Dates from c7000 to c3500 BC. The length is 16mm, width 10mm, thickness 3mm, and the weight is 0.43g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-8C9394

Record ID: LANCUM-8C9394
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mid Mesolithic to early Neolithic tertiary pale grey flint quadrilateral microlith. Extensive short parallel semi-acute retouch along the full length of its cutting edge, and short parallel abrupt retouch along 2/3 of its mounting edge to reduce its thickness. Dates from c7000 to c3500 BC. The length is 12mm, width 8mm, thickness 3mm, and the weight is 0.35g.
Created on: Saturday 10th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31DBA0

Record ID: LANCUM-31DBA0
Object type: BLADE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Neolithic tertiary pale grey flint blade. The distal end has snapped off. Sub-parallel acute to semi-actue short retouch to both mesals. Dates from c4000 to c2350 BC. The length is 26mm, width 18mm, thickness 5mm, and the weight is 2.05g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31CE5B

Record ID: LANCUM-31CE5B
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to early Iron Age grey flint secondary debitage with sub-parallel abrupt to semi-acute retouch to scrapers on the mesals. Dates from c2700 to c400 BC. The length is 22mm, width 21mm, thickness 7mm, and the weight is 3.09g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-6E5B75

Record ID: LANCUM-6E5B75
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Bronze Age to early Iron Age grey flint tertiary debitage. Sub-parallel semi-abrupt retouch to possible side scraper on half of one side with a possible burin at the end. Dates from c2350 to c400 BC. The length is 43mm, width 11mm, thickness 6mm, and the weight is 3.16g.
Created on: Wednesday 14th April 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-6E5995

Record ID: LANCUM-6E5995
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Bronze Age to early Iron Age grey flint secondary debitage with sub-parallel abrupt to semi-acute retouch to scrapers on two sides. Dates from c2350 to c400 BC. The length is 18mm, width 16mm, thickness 6mm, and the weight is 1.20g.
Created on: Wednesday 14th April 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31E3C8

Record ID: LANCUM-31E3C8
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to mid Bronze Age brown grey flint tertiary debitage, with sub-parallel short acute retouch to both mesals to form cutting edges. Dates from c2700 to c1600 BC. The length is 17mm, width 12mm, thickness 2mm, and the weight is 0.49g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31E1DB

Record ID: LANCUM-31E1DB
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Early to late Neolithic grey flint tertiary blade fragment with sub-parallel short acute retouch to both mesals forming edges that could be used for cutting or scraping. Second phase of retouch to the distal mesal to form a burin on the corner. Dates from c4000 to c2350 BC. The length is 17mm, width 12mm, thickness 3.5mm, and the weight is 0.77g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31DDB7

Record ID: LANCUM-31DDB7
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Early Neolithic to early Bronze Age tertiary patinated white flint debitage. Probably a fragment from the proximal end of a discarded blade. There is occasional random short acute retouch to both mesal edges, but nothing that suggests the fragment was reused as a tool. Dates from c4000 to c1600 BC. The length is 15mm, width 11mm, thickness 5mm, and the weight is 0.81g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31EC56

Record ID: LANCUM-31EC56
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Early to late Neolithic red brown flint secondary debitage or blade butt. There is very fine sub-parallel short acute retouch to both mesals. Dates from c4000 to c2350 BC. The length is 13mm, width 11mm, thickness 3mm, and the weight is 0.39g.
Created on: Monday 5th July 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-6E569A

Record ID: LANCUM-6E569A
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mid Mesolithic to late Bronze Age secondary grey flint debitage, or possible multidirectional core. There is a very small area of retouch, possibly to prepare the piece for another removal. Dates from c7000 to c800 BC. The length is 24mm, width 16mm, thickness 6mm, and the weight is 2.75g.
Created on: Wednesday 14th April 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-6EBEC1

Record ID: LANCUM-6EBEC1
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Bronze Age debitage, tertiary pale red brown flint with retouch to proximal mesal and possible distal burin. Dates from c10,000 to c1000 BC. The length is 16mm, width 12mm, thickness 5mm, and the weight is 0.64g.
Created on: Wednesday 14th April 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31F4B2

Record ID: LANCUM-31F4B2
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic to mid Bronze Age debitage, tertiary patinated white flint, heat effected post working, no retouch. Dates from c7000 to c1000 BC. The length is 15mm, width 11mm, thickness 3mm, and the weight is 0.48g.
Created on: Monday 5th July 2021
Last updated: Sunday 18th July 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-31D0B2

Record ID: LANCUM-31D0B2
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Probably Neolithic to mid Bronze Age debitage, a secondary flake of grey flint with no retouch. Probably dates from c4000 to c1000 BC. The length is 28mm, width 14mm, thickness 6mm, and the weight is 2.04g.
Created on: Monday 5th July 2021
Last updated: Sunday 18th July 2021
Spatial data recorded. This findspot is known as 'near Rufford', grid reference and parish protected.


  • Thumbnail image of LANCUM-C73A54

Record ID: LANCUM-C73A54
Object type: BURIN
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic to Early Iron Age chert microlithic burin. It has been formed on a tertiary piece of black chert debitage. There is wear gloss on most of the chert. The burin has been formed at the distal point with the removals creating a point 2mm high. A small area of low angled, scaled, semi-invasive retouch to one of the distal shoulders has produced a notch that could also be utilised as a tool. There is a series of abrupt parallel removals at the proximal end,probably to make it easier to use, and to apply pressure in particular. Probably dates to between c7000 and c400 BC, pro…
Created on: Sunday 19th April 2020
Last updated: Thursday 29th April 2021
Spatial data recorded. This findspot is known as 'near Colne', grid reference and parish protected.


  • Thumbnail image of LANCUM-A39A77

Record ID: LANCUM-A39A77
Object type: BORER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Neolithic black chert drill or borer. The working on the point shows signs of heavy wear. The tool bears a close resemblance to LANCUM-58E110, found on Boulsworth Hill to the south, and also made of black chert. Probably dates from c8300 to c3500 BC. Measures 28.5 in length, 19mm in width, 13mm in thickness and weighs 7grms. Found in association with LANCUM-A3ACB2 on an elevated site.
Created on: Wednesday 27th June 2012
Last updated: Sunday 14th March 2021
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-A3ACB2

Record ID: LANCUM-A3ACB2
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Neolithic chert and flints assemblage, comprising of a chert core(1), chert waste flakes (2-3), and flint pebbles (4-8). Dates to between c8300 and c2100 BC. 1-38x22x11mm, 9grms 2-29x11x8mm, 1.55grms 3-10x11x8mm, 1.5grms 4-26x12x12mm, 4.25grms 5-15x11x8mm, 1.8grms 6-14x13x8mm, 1.4grms 7-19x10x7mm, 1.9grms 8-16x9x5mm, 0.95grms Total weight 22.35g. Found in association with LANCUM-A39A77 on an elevated site.
Created on: Wednesday 27th June 2012
Last updated: Sunday 14th March 2021
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-9F0494

Record ID: LANCUM-9F0494
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Bronze Age assemblage of chert cores, and a mixture of chert and flint waste flakes (debitage). Dates between c10,000 and c1600 BC. 1 - 2.5 x 2 x .75mm, less than 0.1grms. Mesolithic to Neolithic tertiary grey chert micro-debitage. Probably dates to between c7000 and c3500 BC. 2 - 4 x 3 x 1mm, less than 0.1grms. Mesolithic to Neolithic secondary black chert micro-debitage. Probably dates to between c7000 and c3500 BC. 3 - 6 x 3 x 2mm, less than 0.1grms. Mesolithic to Neolithic tertiary black chert micro-debitage, retouched into a possible barb. Probably da…
Created on: Tuesday 26th June 2012
Last updated: Sunday 14th March 2021
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-B9BC27

Record ID: LANCUM-B9BC27
Object type: BORER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Two Mesolithic to Neolithic chert drills or borers. There is considerable wear to the tips of both, and wear to the retouch as well. The larger (object 2) was probably mounted in a stick, bone or antler. Dating to between c8300 & c2500 BC. The first tool is on a secondary flake with a small area of cortex retained at the proximal end. It is 15mm in length, 7mm in width, 4mm in thickness and weighs 0.35grms. The second tool is on a tretiary flake and is 21mm in length, 7mm in width, 5mm in thickness and weighs 0.95grms. Combined weight is 1.30g. The artefacts were f…
Created on: Thursday 28th June 2012
Last updated: Saturday 13th March 2021
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-A38776

Record ID: LANCUM-A38776
Object type: BLADE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic to Neolithic black chert blade on a tertiary flake. The chert at the proximal end is a mid grey. The dorsal ridge has been reduced, probably while on the core. There are areas of wear gloss, particularly on the ventral face at the distal end and in the middle of the dorsal ridge. It is extensively retouched on the mesals and the distal. The wear gloss pattern suggests that pressure was applied on the dorsal ridge and the tool's main working area was the distal. It may have served as a plane or chisel. Dates between c10,000 and c2500 BC, but probably early Mesolithic. 3…
Created on: Wednesday 27th June 2012
Last updated: Saturday 13th March 2021
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-01D1D2

Record ID: LANCUM-01D1D2
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic scalene triangle microlith and microburin. Formed on a tertiary piece of translucent milky white flint. There are small areas of short, acute, sub-parallel retouch on the two shorter edges. The most acute angle of the triangle has been formed into a burin. Dates to between c7000 BC and c4000 BC. The length is 4mm, width 2mm, thickness 1mm, and the weight is under 0.2g. see LANCUM-C38427 for further details of this site
Created on: Tuesday 1st May 2012
Last updated: Saturday 2nd January 2021
Spatial data recorded. This findspot is known as 'Trawden', grid reference and parish protected.


  • Thumbnail image of LANCUM-020524

Record ID: LANCUM-020524
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic flint scalene triangle microlith formed on a grey tertiary flake. There is short acute retouch to one edge. Probably used as a barb for a composite arrowhead, harpoon, or fish spear. Dates to between c7000 and c4000 BC. Length 9mm, width 4mm, thickness 2mm.
Created on: Tuesday 1st May 2012
Last updated: Saturday 2nd January 2021
Spatial data recorded. This findspot is known as 'Robin Hoods House', grid reference and parish protected.


  • Thumbnail image of LANCUM-DA33B1

Record ID: LANCUM-DA33B1
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mid Neolithic to mid Bronze Age chert D shaped scraper. It is roughly semi-circular in plan, sub rectangular in profile, and a pointed sub oval in section. The scraper has been formed on a tertiary piece of black 'Marles' chert. The fully invasive primary working has been retouched, short, semi abrupt to abrupt, sub-parallel to random, on most edges. Dates to between c3500 and c1000 BC. The length is 25mm, width 15mm, thickness 8mm, and the weight 4.8g.
Created on: Tuesday 15th April 2014
Last updated: Saturday 2nd January 2021
Spatial data recorded. This findspot is known as 'Salesbury', grid reference and parish protected.


  • Thumbnail image of LANCUM-B82E7C

Record ID: LANCUM-B82E7C
Object type: CORE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to mid Bronze Age secondary black 'Marles' chert bi-polar core. Overall it is a sub-rectangular in plan and section, sub-triangular in profile. There are removal scars on most of its surface, but the whole of one side has retained cortex. The flake scars are mostly quite broad and show evidence of removal with a hard hammer. Dates to between c2700 and c1000 BC. Length 27mm, width 18mm, thickness 15mm, mass 8.62g Found a few miles from the similar LANCUM-2F7F05
Created on: Wednesday 25th March 2020
Last updated: Friday 18th December 2020
Spatial data recorded. This findspot is known as 'near Ribchester', grid reference and parish protected.


  • Thumbnail image of LANCUM-2F7F05

Record ID: LANCUM-2F7F05
Object type: CORE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to mid Bronze Age secondary black 'Marles' chert bi-polar core. Overall it is a sub-triangular in plan and profile, sub-rectangular in section. There are removal scars on most of its surface, with only a small amount of retained cortex. The flake scars are mostly quite broad and show evidence of removal with a hard hammer. There are some areas near the wider end that appear to have been prepared a new striking platforms. Dates to between c2700 and c1000 BC. The length is 39mm, width 33mm, thickness 24mm, and the weight 40.03g. Found a few miles from the simila…
Created on: Wednesday 9th May 2018
Last updated: Friday 18th December 2020
Spatial data recorded. This findspot is known as 'near Whalley', grid reference and parish protected.


  • Thumbnail image of LANCUM-C38427

Record ID: LANCUM-C38427
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
An assembly of Mesolithic dating between c8300BC and c4500BC), milky white, translucent, flint microliths and microlithic debitage. The largest piece is only 8.5mm by 3.5mm, the smallest 4.5mm by 3mm. There are 10 fragments in total, some showing evidence of secondary working. They appear to be the result of the knapping or retouching of one tool, possibly while sheltering in the lee of the boulder by which they were found. Similar material has been found nearby in the same valley.1- 4.5mm x 4mm; 2- 7mm x 3mm; 3- 6.5mm x 3mm; 4- 7mm x 4mm; 5- 4.5mm x 4mm; 6- 5.5mm x 4.5mm; 7- 5mm x 4m…
Created on: Saturday 28th April 2012
Last updated: Friday 27th November 2020
Spatial data recorded. This findspot is known as 'Briercliffe', grid reference and parish protected.


  • Thumbnail image of LANCUM-B8B345

Record ID: LANCUM-B8B345
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Early to mid Neolithic side scraper on a tertiary flake of grey chert. On one mesal two notches have been removed from near the distal end then the whole ventral edge has received short, parallel to sub-parallel, semi-abrupt retouch The resultant edge probably served three purposes, as a serrated blade, a notched scraper, and as a side scraper if the proximal end was favoured. The other mesal is 7.5mm thick. On its dorsal edge it has short, abrupt, sub-parallel retouch to the whole edge. The ventral edge has a series of scaled semi-invasive removals overlaid with short, abrupt, sub-pa…
Created on: Wednesday 25th March 2020
Last updated: Thursday 28th May 2020
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-C72415

Record ID: LANCUM-C72415
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Early to mid Neolithic side scraper on a secondary flake of dark grey chert. Short, parallel to sub-parallel, semi-abrupt retouch to both mesals. The distal end has been shaped with an invasive intial removal terminating in a hinged fracture. It has then had very short sub-parallel, semi-abrupt retouch. There has been a reduction to the dorsal ridge. Cortex retained at proximal end, probably to aid grip. Dates to between c4000 and c2700 BC. Length 24mm, width 15mm, thickness 7mm, mass 2.86g
Created on: Sunday 19th April 2020
Last updated: Thursday 28th May 2020
Spatial data recorded. This findspot is known as 'near Colne', grid reference and parish protected.


  • Thumbnail image of LANCUM-C72D27

Record ID: LANCUM-C72D27
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to early Bronze Age flint D shaped 'thumbnail' scraper. The scraper is sub square in plan and fabricated on a tertiary flake of pale grey flint with white inclusions, There is no noticeable patination.There are three principle phases of working. In the first it has been roughed out with a series of invasive removals to the dorsal. The second phase consisted of shaping the distal edge with a series of scaled semi abrupt removals. Looking down on the dorsal from the proximal end, the third phase consists of three areas of retouch. The left mesal has minute (all less then …
Created on: Sunday 19th April 2020
Last updated: Wednesday 6th May 2020
Spatial data recorded. This findspot is known as 'near Colne', grid reference and parish protected.


  • Thumbnail image of LANCUM-B8ABA9

Record ID: LANCUM-B8ABA9
Object type: BURIN
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Neolithic to Early Iron Age chert burin. It has been formed on a secondary piece of black 'Marles' chert, probably a worked out core. The retained limestone cortex on the proximal end exhibits quite a high degree of wear, and there is wear gloss on most of the chert. There is sub-parallel, semi-short, abrupt retouch to the shorter of the tool's mesals. This is probably to make the toll more ergonomic but would also have created a small but functional side scraper. The shoulder of this mesal has been reduced with a series of removals at its distal end. The longer mesal has short, …
Created on: Wednesday 25th March 2020
Last updated: Tuesday 14th April 2020
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-4A3237

Record ID: LANCUM-4A3237
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Early Bronze Age flint barbed and tanged arrowhead, similar to a Green Low Type (the barbs are longer than the tang). The flint is a translucent olive brown. The arrowhead is triangular in plan and planoconvex in section and a pointed sub oval in profile. The arrowhead has been formed on a tertiary flake. There are multiple phases of retouch. The initial phase relates to the forming of the artefact and is invasive, scaled and semi abrupt. The second phase is long, sub-parallel, and semi-abrupt. The third phase is short, random, and semi-abrupt. The point has been lost in antiquity. Da…
Created on: Wednesday 2nd October 2019
Last updated: Saturday 30th November 2019
Spatial data recorded. This findspot is known as 'near Gisburn', grid reference and parish protected.


  • Thumbnail image of LANCUM-052D44

Record ID: LANCUM-052D44
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic microlith barb of tertiary grey flint. Probably used as part of a composite arrow or barbed spear. There are removals to the entire surface. Almost all the retouch is pressure flaking from the ventral face and is short to semi-invasive, sub-parallel and semi-abrubt. The proximal end has been reduced, probably to aid in mounting. Dates to between c8000 and c4000 BC. Flint microliths of similar form have have been excavated at various sites throughout Britain, including Cherhill (Wiltshire) where they were dated to the early sixth millenium BC. Length 12mm, width 5mm, thic…
Created on: Tuesday 14th June 2016
Last updated: Wednesday 17th July 2019
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-2F3921

Record ID: LANCUM-2F3921
Object type: END SCRAPER
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Flint flake end scraper of probable Neolithic to Bronze Age date (c. 3500 - 800 BC). The flint is dark brown in colour with slight light brown mottles. It is broadly trapezoidal in shape, with one straight and one curved long edge. The longer short edge displays short, semi-abrupt, scaled retouch on the dorsal face. The ripples of percussion on the ventral face curve across the length of the object. The object is 22.50mm in length, 14.02mm in width and 4.53mm in thickness. It weighs 1.70g.
Created on: Tuesday 12th February 2019
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Thumbnail image of SWYOR-4F02DD

Record ID: SWYOR-4F02DD
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A chert Mesolithic microlith; a Group B geometric crescent shaped example, dating from 8000 BC - 4000 BC. It is formed on dark grey opaque chert; a tertiary blade. The right side is the curved edge and it has short, abrupt, sub-parallel retouch along it. The microlith is 13.3mm long, 5.2mm wide and 1.8mm thick. 0.17g.
Created on: Tuesday 28th August 2018
Last updated: Thursday 6th September 2018
Spatial data recorded.


  • Thumbnail image of LANCUM-A54038

Record ID: LANCUM-A54038
Object type: BLADE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A small flint blade made from a pale greyish brown flake. It shows evidence of a bulb of percussion and concoidal ripples on the ventral side while the dorsal side has two largely parallel dorsal ridges converging at the proximal end where a flake has been removed along the middle. The distal end has been snapped off in antiquity and there is a very small area of cortex remaining towards this end. All edges show evidence of reworking. All surfaces are crazed across their entire area which may be the result of heating or freezing. Length 21mm Width 13mm Thickness 5mm Weight 1.5g
Created on: Friday 25th October 2013
Last updated: Tuesday 4th September 2018
Spatial data recorded. This findspot is known as 'Salesbury', grid reference and parish protected.


  • Thumbnail image of SWYOR-83292A

Record ID: SWYOR-83292A
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B microlith formed on dark grey chert. The flint is triangular in plan and is sub-triangular in cross-section. There is abrupt, sub-parallel, short retouch on the left side. It is 18mm long, 11.4mm wide and 3mm thick. 0.52g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-8363C7

Record ID: SWYOR-8363C7
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B rod microlith formed on dark grey chert. The flint is sub-rectangular in plan and is sub-rectangular in cross-section. There is abrupt, sub-parallel, short retouch on the right side. It is 17.2mm long, 5mm wide and 3.4mm thick. 0.29g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-8376B1

Record ID: SWYOR-8376B1
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B rod microlith formed on patinated white flint. The flint is sub-rectangular in plan and is sub-trapezoid in cross-section. There is abrupt, sub-parallel, short retouch on the left side. It is 17.6mm long, 4mm wide and 2.4mm thick. 0.21g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-8383BF

Record ID: SWYOR-8383BF
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B rod microlith formed on dark grey chert. The flint is sub-rectangular in plan and is triangular in cross-section. There is abrupt, sub-parallel, short retouch on the left side. It is 15.9mm long, 5.2mm wide and 2.3mm thick. 0.18g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-83AB33

Record ID: SWYOR-83AB33
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B microlith formed on light grey flint. The flint is triangular in plan and is trapezoid in cross-section. There is abrupt, sub-parallel, short retouch on both sides. It is 12.8mm long, 3.9mm wide and 1.8mm thick. 0.08g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-83B911

Record ID: SWYOR-83B911
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B scalene triangle microlith formed on grey chert. The flint is triangular in plan and is sub-trapezoid in cross-section. There is abrupt, sub-parallel, short retouch on both sides. It is 14.4mm long, 4.2mm wide and 2.7mm thick. 0.15g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-83C74C

Record ID: SWYOR-83C74C
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B scalene triangle microlith formed on mottled grey flint. The flint is triangular in plan and is D-shaped in cross-section. There is abrupt, sub-parallel, short retouch on the right side. It is 15.3mm long, 4.3mm wide and 2mm thick. 0.11g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-83D4D4

Record ID: SWYOR-83D4D4
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B scalene triangle microlith formed on mottled light grey flint. The flint is triangular in plan and is sub-triangular in cross-section. There is abrupt, sub-parallel, short retouch on both sides. It is 18.6mm long, 4.3mm wide and 3.2mm thick. 0.2g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-83E2CE

Record ID: SWYOR-83E2CE
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
An incomplete flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B microlith formed on patinated white flint. The flint is rectangular in plan and is trapezoid in cross-section. There is abrupt, sub-parallel, short retouch on the left side and the ends are snapped and patinated. It is 6.4mm long, 6.3mm wide and 1.8mm thick. 0.11g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-8407D0

Record ID: SWYOR-8407D0
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B microlith formed on patinated white flint. The flint is sub-triangular in plan and is trapezoid in cross-section. There is some abrupt, sub-parallel, short retouch on the left side at the distal end. It is 13.1mm long, 5mm wide and 2.1mm thick. 0.12g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-8417FE

Record ID: SWYOR-8417FE
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B microlith formed on mottled light grey flint. The flint is sub-rectangular in plan and is sub-trapezoid in cross-section. There is some abrupt, sub-parallel, short retouch on the left side and at the distal end of the right side. It is 15.8mm long, 4.3mm wide and 1.8mm thick. 0.11g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-8426DC

Record ID: SWYOR-8426DC
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B microlith formed on flint which is crazed and whitened, probably owing to exposure to fire. The flint is sub-rectangular in plan with a pointed distal end and is sub-rectangular in cross-section. There is abrupt, sub-parallel, short retouch on both sides. It is 12.4mm long, 4mm wide and 2mm thick. 0.09g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-84733F

Record ID: SWYOR-84733F
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B microlith formed on light grey flint. The flint is lozenge shaped in plan and is sub-rectangular in cross-section. There is abrupt, sub-parallel, short retouch on both sides. It is 13.7mm long, 4.8mm wide and 1.6mm thick. 0.09g.
Created on: Wednesday 10th June 2015
Last updated: Sunday 17th September 2017
Spatial data recorded.


  • Thumbnail image of LANCUM-1B8C12

Record ID: LANCUM-1B8C12
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Flint implement possibly a core used for striking microliths in the Mesolithic 8300 - 4500 BC. The flint is white and perhaps originates from the Yorkshire Wolds or could alternatively be worked beach flint from the Lancashire coast. There are 5 blade scars where microliths have been removed.The length is 30mm and the width 21mm.
Created on: Tuesday 27th September 2011
Last updated: Monday 16th January 2017
Spatial data recorded. This findspot is known as 'LONGTON', grid reference and parish protected.


  • Thumbnail image of LANCUM-1A68E3

Record ID: LANCUM-1A68E3
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Flint waste flake debitage probably from the Yorkshire Wolds possibly Neolithic dating from 3500-2100BC. There are two striking scars on ventral face and one on the dorsal along with a striking platform. The length is 28mm, the width 20mm and thickness 5mm.
Created on: Wednesday 4th November 2009
Last updated: Monday 16th January 2017
Spatial data recorded. This findspot is known as 'HALTON', grid reference and parish protected.


  • Thumbnail image of LANCUM-596416

Record ID: LANCUM-596416
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A flint thumb-nail scraper of very late Neolithic/Early Bronze Age date c.2400-2100 BC. The flint is sub-rounded save for the striking platform edge. It has has short scaled abrupt retouch around the entirety of the rounded edges. The ventral face has been heavily rework to flatten the bulb of percussion with long invasive low angled retouch. Almost all the striking appears to be with heavy hammer technology. The scraper is a limid reddish yellow with mottling possibly from being exposed. The length is 27mm, the width is 14mm, thickness 13mm and the weight 3.77g.
Created on: Monday 5th December 2016
Last updated: Monday 5th December 2016
Spatial data recorded.


  • Thumbnail image of LANCUM-177CC5

Record ID: LANCUM-177CC5
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Complete 'D' shaped scraper knapped from grey black flint and dating from the late Neolithic period 2500-2100BC, possibly a Riley Type 5 (Bond, C. Plate 5.112 and 5.113). The scraper is complete, made from a short, round flake with retouch along the total distal and halfway up the two mesial edges. Both the ventral and dorsal faces are very smooth with even ripple marks. Scrapers could have many uses from scraping the fat off animal skins, to scraping the bark off arrow shafts. The length is 42mm, width 34mm, thickness 6mm and the weight is 14.21g.
Created on: Monday 18th May 2009
Last updated: Sunday 4th December 2016
Spatial data recorded. This findspot is known as 'WYCOLLER', grid reference and parish protected.


  • Thumbnail image of SWYOR-83F33E

Record ID: SWYOR-83F33E
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Published Find published
A flint microlith of late Mesolithic date, about 8000 BC - 4000 BC. It is a Group B crescent shaped microlith formed on mottled light grey flint. The flint is D shaped in plan and is triangular in cross-section. There is abrupt, sub-parallel, short retouch on the right, curved side. It is 12.6mm long, 3.9mm wide and 3.4mm thick. 0.11g.
Created on: Wednesday 10th June 2015
Last updated: Wednesday 12th October 2016
Spatial data recorded.


  • Thumbnail image of LANCUM-825D97

Record ID: LANCUM-825D97
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Lithic implement, probably a knife or scraper. It was knapped from light grey speckled flint and is hardly patinated. The dorsal face shows several large facets while the ventral face shows numerous waves/ripples. There are retouch marks forming a very ragged edge all around the edges on both the ventral and dorsal faces, although they are slightly more pronounced on the dorsal face.
Created on: Thursday 7th June 2007
Last updated: Monday 26th September 2016
Spatial data recorded. This findspot is known as 'Catterall', grid reference and parish protected.


  • Thumbnail image of LVPL-27EF60

Record ID: LVPL-27EF60
Object type: RETOUCHED FLAKE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A flint coarse retouched flake probably dating to the later Bronze Age. The object is triangular in cross-section with the remains of cortex on one side of the dorsal face. At the proximal end is a large triangular striking platform while a small (possibly accidental) triangular platform is at the distal end. Along the long edge the retouch is short, sub-parallel and at a low angle. A small amount of retouch is also on the opposite edge where the cortex has been removed. It is also short, sub-parallel and low angled. The flint has a dark grey cortex and a toffee brown to light cream m…
Created on: Tuesday 28th June 2016
Last updated: Thursday 30th June 2016
Spatial data recorded. This findspot is known as 'Burscough', grid reference and parish protected.


  • Thumbnail image of LANCUM-DEBD4B

Record ID: LANCUM-DEBD4B
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic tertiary black chert microlith. It is sub rectangular in plan & profile & triangular in section. The straight edges are formed by abrubt breaks. The cutting edge is the most curved edge and has short, sub parallel, abrubt retouch. It would have been set into wood, bone or antler as part of a composite tool. Dates to between c6500 and c4000 BC, most likely the first half of the period. Length 9.5mm, width 7mm, thickness 2mm, weight 0.19g
Created on: Thursday 19th May 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-DEBC07

Record ID: LANCUM-DEBC07
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic to Early Neolithic tertiary black chert microlith - an end scraper & burin/gouge, formed on probable microlithic debitage. There are two definite burins/gouges at the distsal end and three projections with wear gloss that have some working and appear to have been used for a similar purpose. Short, sub parallel, abrubt retouch to the end formed into a scraper. This was originally the proximal end & is evidence of reuse. The scars left when the scraper was formed have a fresher patina than elsewhere on the artefact. The date of the intial phase of working is probably c65…
Created on: Thursday 19th May 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-A91895

Record ID: LANCUM-A91895
Object type: BLADE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A blade is an elongated flake that was detached from a core-the rule of thumb being more than twice as long as it is wide. Blades were often modified and mounted in handles or hafts. This blade, dating to the Mesolithic period, is grey in colour, with almost half the cortex remaining on the dorsal face.It is blunt at one end and rounded at the other. There are several flaking scars and the edges are well worked. It measures 51.28mm x 14.67mm and weighs 3.16g.
Created on: Monday 24th November 2008
Last updated: Friday 10th June 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-00857A

Record ID: LANCUM-00857A
Object type: KNIFE
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Leaf-shaped Neolithic flint knife or oval side scraper dating from c. 3000-2100BC. This object appears to have been bifacially flaked suggesting that it is a knife. However, we do not have a side view for this object (only two images were provided by the finder) so we cannot be certain. It looks to have pressure flaking on dorsal side. It was probably formed on tertiary debitage rather than a deliberate stuck core.
Created on: Wednesday 9th March 2016
Last updated: Wednesday 27th April 2016
Spatial data recorded.


  • Thumbnail image of LANCUM-2E5876

Record ID: LANCUM-2E5876
Object type: CORE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Mesolithic to early Neolithic secondary honey flint multi platform core with some fine retouch. The presence of residual chalk on the cortex indicates the flint is derived from a 'mined' source. It also shows that the original nodule was imported into the area in its raw state with the cortex largely intact. The paucity of good quality flint in the area is probably why the core has been worked outward toward the cortex. In the case of this artefact it meant that flakes could continue be struck from a piece of flint that would been discarded in the core preparation stage in a more…
Created on: Wednesday 23rd March 2016
Last updated: Wednesday 23rd March 2016
Spatial data recorded. This findspot is known as 'Pendle Ridge', grid reference and parish protected.


  • Thumbnail image of LANCUM-ADCF41

Record ID: LANCUM-ADCF41
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A large flake of dark flint, probably debitage which may have been shaped into a crude scraper. It appears to have been further worked, showing three removals for microliths from one edge of the dorsal side. The dorsal side has various areas of conchoidal ripples, but these appear to be from later damage rather than knapping. There is evidence of removal of a large flake at the proximal end. The ventral side retains a large area of cortex. The length is 52mm, the width is 40mm mm, and thickness is 15mm
Created on: Monday 22nd February 2016
Last updated: Tuesday 23rd February 2016
Spatial data recorded.


  • Thumbnail image of LANCUM-782F77

Record ID: LANCUM-782F77
Object type: BURIN
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A special type of lithic flake with a chisel-like edge, which was probably used for gouging or carving wood, leather or bone. This is a small, fine flint implement, oval in shape with a sharp point, dating from late Mesolithic to early Neolithic. Conchoidal ripples are pronounced on both surfaces. It is reddish brown in colour. It measures 20.64mm x 14.82mm and weighs 0.48g. These flints form part of a large antiquarian collection of general surface finds. It consists of lithic implements and associated waste flakes. The collection is sourced to, but not specifically identified fr…
Created on: Monday 22nd September 2008
Last updated: Thursday 21st January 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-14F8F0

Record ID: LANCUM-14F8F0
Object type: THUMB NAIL SCRAPER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A Scraper is a unifacially retouched tool with a steep wide angled edge. It is designed to scrape material such as wood, bone and hide.One important variety is the thumbnail scraper, which characteristically tends to be small and discoid in outline. This small, circular worked flint is from the Mesolithic period. It is dark brown in colour with transluscent edges. The cortex covers the dorsal surface, with the exception of the worked edges. The striking platform and bulb of percussion are both evident. The flint measures 18.12mm x 17.58mm and weighs 1.50g. These flints form part of…
Created on: Monday 17th November 2008
Last updated: Thursday 21st January 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-153661

Record ID: LANCUM-153661
Object type: THUMB NAIL SCRAPER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A Scraper is a unifacially retouched tool with a steep wide angled edge. It is designed to scrape material such as wood, bone and hide. One important variety is the thumbnail scraper, which characteristically tends to be small and discoid in outline. This very small, circular flint is from the Mesolithic period. It is dark bown in colour. On the ventral surface, the striking platform and bulb of percussion are evident, with some rippling. The flaking scars almost completely cover the dorsal surface and it has been finely worked. The flint measures 14.67mm x 13.30mm and weighs 1.80g.Th…
Created on: Monday 17th November 2008
Last updated: Thursday 21st January 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-1562F2

Record ID: LANCUM-1562F2
Object type: THUMB NAIL SCRAPER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A Scraper is a unifacially retouched tool with a steep wide-angled edge. It is designed to scrape material such as wood, bone and hide. One important variety is the thumbnail scraper, which characteristically tends to be a small discoid in outline. This sub-circular flint tool dating from the Mesolithic period, has a dark brown glassy hue on the ventral side, with a central area of cortex remaining above the working on the dorsal side. A small flake has broken off just below the striking platform. It measures 17.88mm x 16.95mm and weighs 2.33g. These flints form part of a large ant…
Created on: Monday 17th November 2008
Last updated: Thursday 21st January 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-A807D5

Record ID: LANCUM-A807D5
Object type: THUMB NAIL SCRAPER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A Scraper is a unifacially retouched tool, with a steep wide-angled edge. It is designed to scrape material such as wood, bone and hide. One important variety is the thumbnail scraper, which characteristically tends to be a small discoid in outline. This sub-circular chert dating to the Mesolithic period is light grey in colour with some white mottling and a dull, matt hue. It has a dark grey stripe , which runs obliquely across both sides. A flake has been removed across the stripe, creating a ridge on the dorsal side. It is well worked around the edges. It measures 26.86mm x 23.70mm…
Created on: Monday 24th November 2008
Last updated: Thursday 21st January 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-477CF6

Record ID: LANCUM-477CF6
Object type: THUMB NAIL SCRAPER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A Scraper is a unifacially retouched tool, with a steep wide-angled edge.It is designed to scrape material such as wood, bone and hide. One important variety is the Thumbnail scraper which tends to be a small discoid in outline. This Mesolithic flint is dark grey in coliur and was circular until breakage across the striking platform created two flaking scars at right angles to each other. A piece of cortex on the dorsal face has not been removed and creates a central ridge across the face. It is well worked at the edges. It measures 30.61mm x 25.58mm and weighs 6.77g.These flints form…
Created on: Monday 19th January 2009
Last updated: Thursday 21st January 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-D19106

Record ID: LANCUM-D19106
Object type: BLADE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A blade is an elongated flake that was detached from a core-the rule of thumb being twice as long as it is wide. Blades were often modified and mounted in handles or hafts. This small flint blade, dating to the Mesolithic period, is milky brown in colour, with some creamy speckling. It is rectangular in shape and broken at one corner.It appears to have been retouched. It measures 40.78mm x 20.15mm x 4.84mm and weighs 2.6g. These flints form part of a large antiquarian collection of general surface finds. It consists of lithic implements and associated waste flakes. The collection i…
Created on: Monday 8th June 2009
Last updated: Thursday 21st January 2016
Spatial data recorded. This findspot is known as 'Anglezarke Moor', grid reference and parish protected.


  • Thumbnail image of LANCUM-6253B6

Record ID: LANCUM-6253B6
Object type: CORE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A core is the parent rock from which portions were removed by force. This is a dark grey glassy core, with a little creamy mottling, Mesolithic in date. It is irregularly shaped, with a small strip of cortex remaining. Several elongated flakes have been taken in a row from one face, but it has also been worked from other directions. It measures 33.75mm x 33.19mm and weighs 10.57g. These flints form part of a large antiquarian collection of general surface finds. It consists of lithic implements and associated waste flakes. The collection is sourced to, but not specifically identifi…
Created on: Monday 15th June 2009
Last updated: Thursday 21st January 2016
Spatial data recorded.


  • Thumbnail image of LANCUM-062872

Record ID: LANCUM-062872
Object type: CREMATION
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Various stone fragments, including limestone and chert. White glazed pottery sherds, a piece of worked flint and a fragment of blue glass. Associated with a cremation probably human from a Bronze Age cairn. The length is 5-26mm, and the width is 3-18mm and the thickness is 4-13mm.
Created on: Tuesday 17th December 2013
Last updated: Tuesday 22nd September 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-0648D4

Record ID: LANCUM-0648D4
Object type: CREMATION
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Eight fragments of stone including worked chert and limestone with 1 quartz chipping that may have been worked. Associated with a cremation probably human from a Bronze Age cairn. The length ranges between 6-34mm, and the width between 6-23mm and the thickness between 2-20mm.
Created on: Tuesday 17th December 2013
Last updated: Tuesday 22nd September 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-0657D7

Record ID: LANCUM-0657D7
Object type: CREMATION
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Various fragments of stone including sandstone, limestone and some chert debitage. Also some quartz chippings and a small piece of glass (possibly Roman). Associated with a cremation probably human from a Bronze Age cairn. The length is 2-40mm, and the width is 2-20mm and the thickness is 1-17mm.
Created on: Tuesday 17th December 2013
Last updated: Tuesday 22nd September 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-064172

Record ID: LANCUM-064172
Object type: LITHIC IMPLEMENT
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
An assemblage of four fragments of flint blades, clearly worked and three small pieces of flint debitage and two pieces of limestone which look unworked, but could have been used as tools due to their natural shape. Associated with a cremation probably human from a Bronze Age cairn. The length is 8-38mm, and the width is 5-22mm and the thickness is 1-9mm and the combined weight is 9.42g. Mesolithic to BA lithic assemblage. Two flint flakes, one burnt the other not; both worked and one quartz chipping possibly worked. Associated with a cremation probably human from a Bronze Age cairn. …
Created on: Tuesday 17th December 2013
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-0633E7

Record ID: LANCUM-0633E7
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Two flint flakes, one burnt the other not; both worked and one quartz chipping possibly worked. Associated with a cremation probably human from a Bronze Age cairn. The length is 7-16mm, and the width is 6-14mm and the thickness is 2-7mm. Neolithic to BA lithic assembly of broken implements and/or waste. Associated with LANCUM-06AA41, LANCUM-0788A0, LANCUM-060825.jpg, LANCUM-064172 and LANCUM-069462.
Created on: Tuesday 17th December 2013
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-104311

Record ID: LANCUM-104311
Object type: GUNFLINT
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval tertiary mid grey square gunflint with metal residue on the lower striking edge. From a flintlock firearm, probably a musket, possibly a rifle. Stuart to Victorian in date (c1650 to c1850 AD). Length 21mm, width 20mm, thickness 6.5mm, and mass 3.9g
Created on: Sunday 17th August 2014
Last updated: Monday 1st September 2014
Spatial data recorded. This findspot is known as 'Laneshaw Bridge', grid reference and parish protected.


  • Thumbnail image of LANCUM-C62720

Record ID: LANCUM-C62720
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Probably a late Mesolithic or early Neolithic white flint fragment from a core, possibly part of a broken tool or waste flake. Length 10mm, width 6.5mm, depth 3.5mm, weight 0.1g. Dates to between c6500 & c2900 BC. Other lithics found in localised patches in the area by finder last year and by others throughout the last century or so.
Created on: Sunday 10th March 2013
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'near Clitheroe', grid reference and parish protected.


  • Thumbnail image of LANCUM-58E110

Record ID: LANCUM-58E110
Object type: BORER
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Black Pennines chert borer possibly Late Mesolithic to Early Neolithic 6500-2900 BC. The chert is a dull black in colour with traces of the original white banding at the distal end. The surface reveals traces of weathering but this would be consistent with the original working of the weathered face for extraction. There are known sources of black chert in the South Pennines and this may well be naturally occurring around Boulsworth Hill and Thursden Valley. The length is 42mm, the width 30mm and the depth 16mm.
Created on: Monday 25th October 2010
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Trawden', grid reference and parish protected.


  • Thumbnail image of LANCUM-58BBE7

Record ID: LANCUM-58BBE7
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Black Pennines chert blade possibly Late Mesolithic to Early Neolithic 6500-2900 BC. The chert is a dull black in colour with traces of the original white banding. The surface reveals traces of weathering but this would be consistent with the original working of the weathered face for extraction. There are known sources of black chert in the South Pennines and this may well be naturally occurring around Boulsworth Hill and Thursden Valley. The length is 55mm, width 30mm, thickness 20mm, and mass 24.8g.
Created on: Monday 25th October 2010
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Trawden', grid reference and parish protected.


  • Thumbnail image of LANCUM-58B151

Record ID: LANCUM-58B151
Object type: MICROLITH
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Pennines chert microlith possibly Late Mesolithic to Early Neolithic 6500-2900 BC. The chert is a dull grey in colour. There are known sources of grey chert in the South Pennines and this may well be naturally occurring around Boulsworth Hill and Thursden Valley. The length is 25mm, width 12mm and thickness 10mm.
Created on: Monday 25th October 2010
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Trawden', grid reference and parish protected.


  • Thumbnail image of LANCUM-58A2C7

Record ID: LANCUM-58A2C7
Object type: SCRAPER (TOOL)
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Worked Pennines chert scraper possibly Late Mesolithic to Early Neolithic 6500-2900 BC. The chert is grey in colour with cortex. There are known sources of chert in the South Pennines and this may well be naturally occurring around Boulsworth Hill and Thursden. The length is 26mm, width 18mm, thickness 3mm and the weight is 3.43.
Created on: Monday 25th October 2010
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Trawden', grid reference and parish protected.


  • Thumbnail image of LANCUM-032950

Record ID: LANCUM-032950
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Mesolithic worked chert dating between c8300BC and c4500BC. 1-black & grey chert, possibly debitage 15mm x 7mm x 6mm, 0.8grms 2-black chert waste flake 12mm x 7mm x 3mm, 0.4grms
Created on: Tuesday 1st May 2012
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Trawden', grid reference and parish protected.


  • Thumbnail image of LANCUM-029AC4

Record ID: LANCUM-029AC4
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
One flint and 9 chert Mesolithic dating between c8300BC & c4500BC) microliths and debitage. 1-white flint 7mm x 6mm x 1.5mm, less than 0.1grms. 2-high quality black chert 9mm x 6mm x 1mm, less than 0.1grms. 3-high quality green/grey chert debitage 18mm x 11mm x 5mm, 1.15grms. 4-high quality grey chert debitage 17mm x 13mm x 5mm, 1.6grms. 5-high quality grey chert microlith 13mm x 6mm x 4mm, 0.45grms. 6-low quality chert debitage 7mm x 6mm x 2mm, less than 0.1grms. 7-black chert debitage 6mm x 5mm x 2mm, less than 0.1grms. 8-high quality light grey chert debitag…
Created on: Tuesday 1st May 2012
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Briercliffe', grid reference and parish protected.


  • Thumbnail image of LANCUM-9F64A3

Record ID: LANCUM-9F64A3
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A chert and flint assemblage, probably Mesolithic, consisting of a broken flint microlith, a chert tool possibly broken, and three waste flakes. Dating from c8300 - c4500 BC. 1-Speckled black chert tool - possibly broken - with the top of the tool being a fine grained, hard, silicated grey limestone.. 10x6x3mm, 0.8grms. 2-Broken black flint microlith. 6x3x7.5mm, less than 0.1grms. 3-Speckled black chert waste flake. 8x4.5x4mm, less than 0.1grms. 4-Speckled black chert waste flake. 6x4.5x2mm, less than 0.1grms. 5-Speckled black chert waste flake. 11.5x8x3mm, less than 0.1grms.
Created on: Tuesday 26th June 2012
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Salesbury', grid reference and parish protected.


  • Thumbnail image of LANCUM-9F28D3

Record ID: LANCUM-9F28D3
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Chert assemblage, probably Mesolithic dating between c8300 and c4500 BC, consisting of a broken implement, a waste flake and a possible core. 1-6x5x3mm, less than 0.1grms. 2-32x27x16mm, 14.1grms. 3-12x10x6mm, 0.4grms.
Created on: Tuesday 26th June 2012
Last updated: Monday 9th June 2014
Spatial data recorded. This findspot is known as 'Salesbury', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 317
Search server index: asgard

You are viewing records: 1 - 100.

Search statistics

  • Total quantity: 451
  • Mean quantity: 1.423
  • Maximum: 17

Filter your search

1 - 100 of 317 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.