Record ID: LANCUM-5102E5
Object type: COIN
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A silver penny of Edward I Obverse: Bust facing, Legend  EDW R ANGL DNS HYB  Reverse: Long cross, three pellets between each arm. Legend CIVI TAS LON DON Dimensions: It is 20mm approximately in diameter Thans to the finder for the photographs and identification
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Near Carnforth', grid reference and parish protected.

Record ID: LANCUM-50886A
Object type: INGOT
Broad period: IRON AGE
County: Lancashire
Workflow stage: Awaiting validation
A copper alloy ingot. It is basically rectangular in shape but with rounded ends and a waisted centre. It is flat on the bottom and domed on the top. The base has a series of vertical lines moulded into it which may be a relic of the moulding process. It has an even brown patina with little corrosion or damage. It is difficult to date this type of object, a wide date range has been allocated but it may be relatively recent in date.  Dimensions: 78mm long, 20mm wide and 12mm deep approximately. It weighs 78.35g
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Near West Bradford', grid reference and parish protected.

Record ID: LANCUM-4F6F90
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Lancashire
Workflow stage: Awaiting validation
Section of a copper alloy knobbed terret ring of probable later Iron Age or early Roman dating. It would be D shaped in plan when complete, what survives here is part of the base and a section of one side. The base is sub-rectangular in section, and is divided by a circular collar protruding from the ring, which has suffered some damage on one side. This has a central line moulded into it. The ring is oval in section, decreasing in diameter as it curves towards what would have been the top. Near the end is a sphere on the outside as decoration. The te…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Near West Bradford', grid reference and parish protected.

Record ID: LANCUM-4F3F31
Object type: COIN
Broad period: ROMAN
County: Lancashire
Workflow stage: Awaiting validation
Denarius of Trajan, AD 103-111 Obverse: Laurate bust right draped Legend - IMP TRIAINO AVG GER DAC P M TR COS V P P Reverse: Dacia seated right in mourning, on curved shield, sword below Legend - SPQR OPTIMO PRINCIPI Diameter 18mm approximately Thanks to the finder for the photograph and identification
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Near West Bradford', grid reference and parish protected.

Record ID: LANCUM-4F0A9C
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A lead alloy bi conical spindle whorl. The design on both faces consists of a central circular line crossed by diagonal lines, regularly spaced. In each of the cells formed by these are dots. There is a border around the central hole as well. It has an even white patina. Similar spindle whorls on the PAS database are dated to AD 1100-1500 Dimensions: It is 38mm diameter and itweighs 50g
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Near West Bradford', grid reference and parish protected.

Record ID: LANCUM-8A2374
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A copper alloy axe, a shield-pattern palstave similar to the Acton Park phase metalwork. The stop is approximately half way along the flange, and the flange is curved at the bade end. The blade tips recurve. The flange sides are diamond shaped, tere is some damage to the flange sides. It dates to the middle Bronze Age, 1500-1140 BC Dimensions: 130mm long and 40mm wide, it weighs 355g
Created on: Monday 6th November 2023
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Tunstall', grid reference and parish protected.

Record ID: LANCUM-EA5435
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A probable lead alloy spindle whorl. It is bi-conical in shape but rounded. It is worn but discernible on both sides is a pattern of lines and dots. It has a grey patina, the central hole is either slightly mis-moulded with an inset line on both sides or alternatively has the remains of a concretion in it. The patination (or lack of) would suggest a later date although the hole diameter might suggest an early medieval date. Dimensions: It is 23mm in diameter, 10mm deep and the central hole is 8mm diameter and it weighs 23.00g
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: LANCUM-EA52E3
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A lead alloy bi-conical spindle whorl. The design on one face consists of two concentric circles, one inside the inner edge and one at the outer edge, and from these run a number of lines parallel to the borders, inside each cell formed by these is a dot. The other side also has two borders at the inner and outer diameter and lines running parallel to these to form trapezoid cells but there are more of these, some of which may have dots or further lines in them. It is distorted, one side having been squashed or mis-moulded causing an uneven distribution of material. …
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: LANCUM-EA51A9
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A probable lead alloy spindle whorl. It is plano-convex in shape with a domed side, rounded edges and a flat base with a central perforation which is off centre.  No decoration is present on either side and it can be classified as Walton Rogers form A1 (Walton Rogers, 1997, p.1731/1738). The whorl has an even light brown patina. Similar examples on the database include WMID-158431 Dimensions: It is 27mm in diameter and 6mm thick, the central hole is 9.0mm diameter and it weighs 21.60g
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: LANCUM-EA5036
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A lead alloy bi conical spindle whorl. The design on both faces consists of two concentric circles formed of approximately 15 dots. The central hole is not even, it has been crushed out of a circular shape on one side. It has an even white patina. Similar spindle whorls on the PAS database are dated to AD 1100-1500 Dimensions: 27mm diameter and 11.5mm deep, the central hole is 10mm diameter and it weighs 30.03g
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Bolton le Sands', grid reference and parish protected.

Record ID: LANCUM-EA4E99
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A lead alloy bi-conical spindle whorl. The design on one face consists of two concentric circles, one inside the inner edge and one at the outer edge, and from these run four lines parallel to the borders. Inside the four cells are patterns of six or seven dots in two lines. The other side has two borders at the inner and outer diameter and lines running parallel to these to form trapezoid cells.. It has an even grey patina. Similar spindle whorls on the PAS database are dated to AD 1100-1500 Dimensions: 28mm diameter and 8.5mm deep, the central…
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: LANCUM-EA4B36
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A complete lead alloy spindle whorl. It is plano-convex in shape with a domed side, rounded edges and a flat base with a central perforation  No decoration is present on either side and it classified as Walton Rogers form A1 (Walton Rogers, 1997, p.1731/1738). The whorl has an even fawn patina. Similar examples on the database include WMID-158431 Dimensions: It is 19mm in diameter and 6mm thick, the central hole is 9.0mm diameter and it weighs 11.40g
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: LANCUM-EA48E8
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A lead alloy bi conical spindle whorl. The design on one face consists of lines which form triangular and trapezoid shapes. Inside some of these frames are dots, and there are dots around the outer as well. The other side has lines outward from the centre, inside of these are two dots in line with the frames. There is a border along the inside and outer diameters. It has an even white patina. Similar spindle whorls on the PAS database are dated to AD 1100-1500 Dimensions: 28mm diameter and 9mm deep, the central hole is 9.5mm diameter and it…
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: LANCUM-E79E26
Object type: GAMING PIECE
Broad period: EARLY MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
  A lead alloy object, possibly a gaming piece, counter or small weight, of Roman to Medieval date. The object is circular, with vertical sides slightly bowed out in the middle, and a flat base. The edge of the base and top are rounded. In the top is a depression in the centre. These are sometimes seen on early medieval pieces with coloured stones inserted in the top, as found at Torksey. As such an early medieval date is suggested for this. It is not evenly cast and there is some damage to the edges. It has an even light white patina.  Dimensions: …
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded. This findspot is known as 'Near West Bradford', grid reference and parish protected.

Record ID: LANCUM-3FF59A
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A lead alloy weight in the shape of a bell, with straight sides and curved top. Embedded in it are the remains of an iron suspension loop.  Dimensions: It is 31mm high and 34mm in diameter and weighs over 200g
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded. This findspot is known as 'Near Salmesbury', grid reference and parish protected.

Record ID: LANCUM-40058C
Object type: GAMING PIECE
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A sub-square lead alloy gaming piece, token or possible weight. It is rhomboid in shape although it was probably intended to be square. At each corner is an upstanding 'knop' cutting the diagonal of the corner to about a quarter of its length. Running across the face from these are two parallel lines etched into the lead alloy. The bottom of the artefact is flat, it has an even mid grey patina. Dimensions: it is 32mm long and 32mm wide, 6mm thick and weighs 47.65g
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded. This findspot is known as 'Near Salmesbury', grid reference and parish protected.

Record ID: LANCUM-400A44
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A circular lead alloy weight or token. It might have had a raised portion around the circumference, as a copper alloy or iron weight would typically have, but this has been partially folded down. The base is plain. There are no figures etc. giving weight equivalent Dimensions: it is 52mm diameter and 12mm high. It weighs 200.69g
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded. This findspot is known as 'Near Salmesbury', grid reference and parish protected.

Record ID: LANCUM-3F9B6B
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A circular copper alloy livery button that with the remains of silver plating. It has the initials LV set in a representation of the Grand Cross of the Royal Victorian Order - an eight pointed star formed of parallel lines of varying lengths. A crown is set in the top of this. Dimensions: It is 20mm in diameter and weighs 3.83g
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded. This findspot is known as 'Near Caton', grid reference and parish protected.

Record ID: LANCUM-3F5537
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A copper alloy two piece shoe or hat buckle frame, both the pin and spindle are missing but there are traces of the iron spindle in the top and bottom of the frame. It is undecorated, and curved, sub square in section Dimensions: It is 55mm high and 50mm wide
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded.

Record ID: LANCUM-3F1C46
Object type: ARROWHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A barbed and tanged arrowhead, formed by knapping. It is made of a pale semi- transluscent flint with some inclusions. It is slightly flatter on one side then the other, and the tip of one of the barbs is missing. Having been found near a beach it has been worn so no sharp edge remains, but the shape is consistent. Arrowheads such as these, see also NMGW-24C12C, are classified as Sutton Type B (Green 1980) are commonly associated with the emergence of the Beaker phenomenon in Britain. Dimensions: It is 21mm long and 16mm wide, it weighs 1.53g
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded.