Record ID: LANCUM-433972
Object type: STYLUS
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A stone object that is probably a stylus. It is rectangular in section for most of its length, with two slightly shorter sides, and tapering to a gently rounded point. The top is decorated with a central grooved line which extends approximately 20mm down from the top, and into this are four further grooves lines, two on each side. This pattern is on all four sides. The top also has a notch carved in across the middle. The stone is even dark grey in colour. A similar object is KENT-ADC560, which is dated to the medieval to post medeival period, as styli of …
Created on: Thursday 21st December 2023
Last updated: Friday 5th January 2024
Spatial data recorded. This findspot is known as 'Near Quernmore', grid reference and parish protected.

Record ID: NLM-D1ED35
Object type: BRACELET
Broad period: UNKNOWN
County: Lancashire
Workflow stage: Awaiting validation
Stone ring found in the River Ribble by a metal detector user, but as an 'eyes only' find. The finder describes the river as being particularly low at the time of his discovery due to hot weather.The tint and location could both suggest the object to be of Limestone. He kindly supplies oblique and direct images [used to compile the accompanying composite view] and the following notes on dimensions: 'It weighs 65 grams and has a circumference of 73mm. The outer wall measures 21mm at its widest by 12mm at its thickest point'. Armlets of jet and shale are known particularly from Ear…
Created on: Wednesday 18th August 2021
Last updated: Wednesday 18th August 2021
Spatial data recorded.

Record ID: LANCUM-DA60B2
Object type: WHETSTONE
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Published
Roman to Modern cigar shaped whetstone. The finder's partner is a qualified geologist and says the sharpening stone is made from a "Fine to medium grained, quartz cemented sandstone, probably local millstone grit but its source location in the Bowland stratigraphic sequence is not known. The visible striations are not natural." Falttened areas or facets are typical of stones that have been well used. The tapered elongated cylindrical shape is typical of those used for sharpening scythes and sickles. Similar stones in modern materials are still in production (see attached image). Sickl…
Created on: Wednesday 7th April 2021
Last updated: Tuesday 16th November 2021
Spatial data recorded. This findspot is known as 'near Garstang', grid reference and parish protected.

Record ID: LANCUM-B819FB
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
Late Neolithic to early Bronze Age agate D shaped 'thumbnail' scraper. The scraper is sub square in plan and fabricated on a tertiary flake of orange agate with transparent banding. There is no noticeable patination. Retouched on most edges. Very few worked agate tools have been discovered on the western side of the Pennines. The scraper, or possibly the raw stone as either a core or nodule, probably originated in Northumberland where agate is more widely utilised to fabricate lithic utensils. It could be seen as a proof of cross Pennine trade. Dates to between c2700 and c1600 BC. …
Created on: Wednesday 25th March 2020
Last updated: Friday 3rd July 2020
Spatial data recorded. This findspot is known as 'near Ribchester', grid reference and parish protected.

Record ID: SWYOR-820585
Object type: LAMP
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A stone possible cresset lamp, of Medieval to Post Medieval date. The object is a block of stone (probably sandstone) which is roughly square in plan with a slightly more rounded base. In the centre of the top face is a circular depression of about 9cm diameter. The bowl seems to small to have been used as a mortar or creeing trough. It is also possible that the stone is an architectural fragment, perhaps from a lintel, with the hollow acting as a housing for a pivoting door pintle or similar. The stone is about 22cm wide. Compare DUR-9DFB21 which is a similar size. This object w…
Created on: Monday 3rd February 2020
Last updated: Wednesday 26th February 2020
Spatial data recorded.

Record ID: LANCUM-421FE3
Object type: WHETSTONE
Broad period: UNKNOWN
County: Lancashire
Workflow stage: Awaiting validation
Whetstone pendant of uncertain date within the period c. 2150 BC - AD 1400. The object is square and tapers to a broken forked edge. The top of the object is pierced and demarcated from the rest of the object by horizontal grooves that run around the top and the bottom of the piercing. Vertical grooves run down the centre of each face. The piercing is wider at one end than the other. The object is formed from dark-grey stone. It is 51.44mm in length and 11.54mm in width. It weighs 8.86g. Whetstone pendants of similar form are known from a number of archaeological periods, including…
Created on: Wednesday 14th August 2019
Last updated: Thursday 22nd August 2019
Spatial data recorded.

Record ID: LANCUM-0775C1
Object type: POLISHED AXEHEAD
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Awaiting validation
Slightly damaged polished stone axehead of Neolithic date (c. 4000 - 2350 BC). The axehead is formed from grey stone, probably Langdale tuff. The surface of the object has been weathered and is rough and pitted, to a greater degree on one side than the other. The more weathered side is also darker in colour. There is some brown surface accretion on both sides. The object is broadly rectangular in shape with a lentoid section. It widens slightly at one end and narrows into an unsymmetrically curved cutting edge. The other (butt) end is badly chipped and damaged. The object is 153.5mm i…
Created on: Tuesday 31st July 2018
Last updated: Wednesday 3rd April 2019
Spatial data recorded.

Record ID: LANCUM-F41A76
Object type: ARCHITECTURAL FRAGMENT
Broad period: UNKNOWN
County: Lancashire
Workflow stage: Awaiting validation
A fragment of a stone that appears to in the form of a claw. It was found in the River Ribble and is water damaged and may have be natural and sculptured by the water. Having said that it does appear to have been worked and is likely to be either an architectural fragment or a component element of a sculpture. Period unknown but possibly post-medieval. The length is 90mm, the width is 48mm thickness 36mm and the weight 203.25g.
Created on: Tuesday 25th April 2017
Last updated: Tuesday 25th April 2017
Spatial data recorded.

Record ID: LANCUM-686E06
Object type: AXEHEAD ROUGHOUT
Broad period: NEOLITHIC
County: Lancashire
Workflow stage: Published
A complete though probably unfinished stone axehead probably a roughout of Neolithic date, c. 3500 - 2100 BC discovered below the foundations of a cottage garden wall. The axehead is possibly of the Graig Lwyd Group VII axe - the patina looks the type and the white speckles on a blue-grey matrix is typical of the rock type or it could be an epidiotised greenstone Group VI Langdale axe. The axe head is trapezoidal in plan with a pointed ovate section. The surfaces are rough with a chip to one side of the butt edge. The unpolished nature of the object suggests it was not properly finish…
Created on: Monday 13th March 2017
Last updated: Friday 13th April 2018
Spatial data recorded.

• 

  Image not taken

Record ID: IARCH-10B068
Object type: GAMING PIECE
Broad period: ROMAN
County: Lancashire
Workflow stage: Awaiting validation
A stone disc (possibly shale or slate) reported with the coins. Thought to be a counter or playing piece. Smooth faces, square profile edge. From unpublished report by S C Bean. 21mm diameter, 3mm thick
Created on: Tuesday 20th January 2015
Spatial data recorded. This findspot is known as 'Lathom', grid reference and parish protected.