Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Dorset
    • Thumbnail: Only records with images please
    • Object type: VESSEL
    • Sort: institution
    • Primary material: Copper alloy
    • Direction: desc
    • Show this many records per page: 40

  • Thumbnail image of YORYM-05EDB3

Record ID: YORYM-05EDB3
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy Medieval to post Medieval vessel, dating to the period c.AD 1100-1700. The fragment comprises the foot, which is trapezoidal in cross section at the base. The cross section then narrows to become broadly lentoid when the foot extends upwards and narrows in width. A central longitudinal rib is present down the centre of the front.The upper terminal ends in a worn break. A green patina is on the surface, and sooting is present over much of the surface. Cast cooking vessels seem to have been in use from c.AD 1100 until c.1850, when they were superseded by …
Created on: Monday 7th November 2016
Last updated: Friday 11th November 2016
Spatial data recorded.


  • Thumbnail image of YORYM-068271

Record ID: YORYM-068271
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy Post-Medieval vessel, dating to the period c.AD 1500-1900. The fragment comprises the foot, which is broadly rectangular in plan and square in cross section. An integrally cast semi-circular flat surface is present at the upper terminal, with a worn break around its edge where it would have attached to the vessel. Its lower terminal slopes at an angle of 45 degrees to allow the leg to stand flat. A green-brown patina is on the surface.. A similar, but not identical example is dated to the 18th and 19th centuries (Butler, Green and Payne 2009, p.6), and …
Created on: Monday 7th November 2016
Last updated: Friday 11th November 2016
Spatial data recorded.


  • Thumbnail image of WILT-164EF4

Record ID: WILT-164EF4
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Late medieval/ early post medieval copper alloy foot from probably a large and substantial cauldron. On the underside it is D-shaped , the long straight side being beneath the toes. The toes slope upwards and backwards so the foot is triangular in section, being thickest at the (ancient) break. there is a central rib which ends just below the break. The toes downturn very sharply. Measures 52mm wide, 39.5mm long and 26.5mm thick. Weighs 139.78g.
Created on: Friday 10th March 2006
Last updated: Tuesday 27th September 2016
Spatial data recorded.


  • Thumbnail image of WILT-98A173

Record ID: WILT-98A173
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Early Post-Medieval (c.1550-1700) sheet copper alloy handle attachment plate from a skimmer (or similar) with part of the original wooden core surviving. Part of the handle length is missing, as is the pierced skimming plate to which it would have attached. It survives in three pieces - the wooden core and attachment plate, of which a small piece is loose. It measures 100.22x40.44x(max)9.09mm and weighs 32.03g. The handle attachment itself comprises three separate pieces of sheet copper alloy. Two run the entire length of the surviving piece, one front and one back, wh…
Created on: Friday 23rd July 2010
Last updated: Friday 30th July 2010
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Thumbnail image of WILT-03A637

Record ID: WILT-03A637
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Post-Medieval copper alloy pot leg, of Butler, Green and Payne's type C, probably dating to c. AD 1500-1700. The leg is sub-rectangular in plan and plano-convex in cross-section, with a prominent transverse collar dividing the foot and leg, with the latter lost to an old break. The inside edge is flat and plain, whilst the foot has five prominent longitudinal ridges down its front. Dimensions: length 46.7mm; width 26.1mm; thickness 18.0mm; weight 68.01g. Butler, Green & Payne (2009) classify such legs as their type C, in use by the 16th century and ubiquitous by the 17th.
Created on: Monday 5th November 2018
Last updated: Wednesday 12th December 2018
Spatial data recorded.


  • Thumbnail image of WAW-4B7FA1

Record ID: WAW-4B7FA1
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The object is a vessel lid. It is sub circular in plan, with a sub-semi circular platform protruding from one edge. There are at least 5 very small angular protrusions which are probably decorative. The upper surface is slightly convex, the under surface is concave. Only the upper surface is decorated. The decoration is in the form of ‘ring and dots’ forming a border around the edge, and an inner circle which has trefoils of ‘ring and dot’ designs in the centre. There are also two fine concentric grooves between the inner and outer ‘ring and dot’ borders. The semi-circular …
Created on: Friday 11th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-3C7384

Record ID: SOMDOR-3C7384
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy wide, everted rim from a cooking pot. Fragment only. There is a raised rim around the outer edge of the vessel rim on the inner surface. There are traces of sooting on the outside
Created on: Wednesday 7th April 2004
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


  • Thumbnail image of SOMDOR-16B0C2

Record ID: SOMDOR-16B0C2
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a medieval or post-medieval metal cooking vessel, probably a post-medieval skillet judging by its dimensions and hoof-like form. The leg measures 53.11mm in length, 31.06mm in width and 18.10mm in thickness. It weighs 111.47g. The cross-section is D-shaped. From the base the leg narrows gradually to the point of the break, although in the centre of the surviving fragment the leg thickens briefly. There are also three slight vertical ridges which are equally spaced over the curving front. This leg would have been one of three on the complete vessel.
Created on: Thursday 15th June 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Pamphill', grid reference and parish protected.


  • Thumbnail image of SOMDOR-FDA123

Record ID: SOMDOR-FDA123
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy foot from a cooking vessel of medieval or post-medieval date. The foot measures 48.5mm by 27.5mm by 19.8mm and weighs 102.6g. It has a D-shaped base and a flat front with a central vertical ridge which is set at 45 degrees. The foot would have been one of three on a cauldron, skillet or posnet.
Created on: Thursday 7th September 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kington Magna', grid reference and parish protected.


  • Thumbnail image of SOMDOR-FDC635

Record ID: SOMDOR-FDC635
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy object which is probably the terminal from the drop handle from a vessel of later medieval or early post-medieval date. The zoomorphic terminal measures 23.4mm by 17mm by 14.8mm and weighs 24.4g. Both ends are flat with a off-centre hole which is much narrower at the mouth end. The terminal appears to be moulded to resemble a dog, with diagonally orientated leaf-shaped ears, sunken eyes, slightly narrowed snout, upwards projecting nose and open mouth. A similar zoomorphic terminal collar is illustrated in Egan (1998, p. 175, no. 487). Egan states that a comparable h…
Created on: Thursday 7th September 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kington Magna', grid reference and parish protected.


  • Thumbnail image of SOMDOR-0FE673

Record ID: SOMDOR-0FE673
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The broken terminal end of a Roman copper alloy patera (skillet) handle. The sides of the handle taper towards the break with a double grooved linear border on either side. The terminal of the handle is circular with a beaded border running around its circumference, the centre is pierced for suspension and also has a beaded rim around its edge. A good parallel for this handle is provided by a complete vessel from Gloucestershire recorded on the database as GLO-048BB1. The handle would originally have been cast as one with the vessel. However, there is evidence for re-use. the broken e…
Created on: Monday 2nd October 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-AA4F34

Record ID: SOMDOR-AA4F34
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A very worn or miscast copper alloy leg from a cauldon, skillet or posnet of medieval or post medieval date. The surfaces of the object are very uneven although the front appears to have a moulded vertical central ridge. The leg would have been one of the three required to support the vessel, although if this example was indeed miscast it would never have been used. Dimensions: 43.55mm by 41.19mm by 18.85mm Weight: 103.2g
Created on: Friday 17th March 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Compton Abbas', grid reference and parish protected.


  • Thumbnail image of SOMDOR-AA8641

Record ID: SOMDOR-AA8641
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A small cast copper alloy leg from a small cauldron, skillet or posnet of medieval or post medieval date. The base of the leg is flat and D-shaped and the leg is steeply angled. The leg would have been one of three required to support the vessel. Dimensions: 34.66mm by 24.71mm by 13.72mm Weight: 42.28g
Created on: Friday 17th March 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Compton Abbas', grid reference and parish protected.


  • Thumbnail image of SOMDOR-53DF91

Record ID: SOMDOR-53DF91
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Published Find published
A cast copper alloy Roman vessel foot, probably from a bucket. These items were used in sets of three to protect the bases of Roman cast or sheet bronze vessels, in particular buckets (Jackson 1990, 46). The foot has a slightly curving rectangular shape, which would have corresponded to the size of the base of the vessel it supported. In this case the bucket's base must have been around 18 cm in diameter. There are two opposing kidney-shaped perforations through the centre of the object and at each end is a cut away stepped notch. One side of the object is flat, but the other has a lon…
Created on: Thursday 6th October 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-9AE3A5

Record ID: SOMDOR-9AE3A5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy cauldron leg. D sectioned leg which flares towards the base and has a thick, rounded collar near the top. The back is flat and undecorated and the fornt is decorated with five longitudinal cast ridges (the same alignment above and below the collar). The collar is undecorated. The underside of the foot is worn and blackened. Originally soldered to a cauldron or skillett. Date: Post-medieval 16th to 17th century
Created on: Monday 23rd August 2004
Last updated: Thursday 6th September 2012
Spatial data recorded.


  • Thumbnail image of SOMDOR-1DA597

Record ID: SOMDOR-1DA597
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Part of a leg from a cast copper alloy cooking vessel of medieval or post-medieval date. The leg measures 37.2mm in length, 33mm in width and 16.7mm in thickness. It weighs 71g. The cross-section is D-shaped, with a flat undecorated back and a curving front with five vertical ribs. The D-shaped base is fairly flat and is at a sixty degree angle to the rest of the leg. From the base the leg starts to narrow but widens again after about 25mm. At the top of this wider section the break has occurred. The leg would have been one of three on the complete vessel. Its dimensions and hoof-like …
Created on: Thursday 1st February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of SOMDOR-1DC364

Record ID: SOMDOR-1DC364
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Part of a leg from a cast copper alloy cooking vessel of medieval or post-medieval date. The leg measures 41.6mm in length, 27.6mm in width and 14mm in thickness. It weighs 58.3g. The cross-section is D-shaped, with a flat undecorated back and a curving front with five slight vertical ribs. The D-shaped base is rounded. From the base the leg starts to narrow but widens again after about 26mm. Just above this wider section the break has occurred. The leg would have been one of three on the complete vessel. Its dimensions and hoof-like form suggest that it came from a post-medieval skillet.
Created on: Thursday 1st February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of SOMDOR-1DD442

Record ID: SOMDOR-1DD442
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A worn and incomplete leg from a cast copper alloy cooking vessel of medieval or post-medieval date. The leg measures 45.9mm in length, 31.8mm in width and 14.2mm in thickness. It weighs 73g. The cross-section is a long oval with slightly pointed ends. The back appears to have three slight facets (although one side is damaged) and the front appears to have a low and wide vertical rib in its centre. The break is concave. The leg would have been one of three on the complete vessel.
Created on: Thursday 1st February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of SOMDOR-5A6882

Record ID: SOMDOR-5A6882
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a posnet or skillet and dating from the 13th-17th century. The leg is thin and flat (sub-rectangular section) with a rounded foot. It is approximately 36mm long.
Created on: Friday 16th February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Toller Down', grid reference and parish protected.


  • Thumbnail image of SOMDOR-24E512

Record ID: SOMDOR-24E512
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The leg of a cast copper alloy cooking vessel, either a cauldron, a posnet or a skillet, of medieval or post medieval date. The leg measures 60.6mm by 35.8mm by 16.4mm and weighs 104g. It has a flat D-shaped cross-section with a flat front and trapezoidal facetted back. The front face has a central projecting vertical rib. The leg widens towards the flattish sub-pentagonal base. It would have been one of three on a complete vessel.
Created on: Monday 8th January 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Okeford Fitzpaine', grid reference and parish protected.


  • Thumbnail image of SOM-F02A52

Record ID: SOM-F02A52
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy vessel of probable post-medieval date. It is difficult to be certain if this is a rim or a base fragment. It is possibly a piece of a base from a pedestal footed vessel. It has a curved outer edge with a groove and ridge around the circumference. The vessel is thinned considerably from the edge.
Created on: Monday 5th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Corfe Castle', grid reference and parish protected.


  • Thumbnail image of SOM-30CF62

Record ID: SOM-30CF62
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A leg from a cast copper alloy cooking vessel such as a cauldron or skillet, of medieval or post-medieval date. The leg measures 46.1mm by 22.1mm by 11.5mm and weighs 52g. The cross-section is D-shaped, with a flat undecorated back and a curving front. The D-shaped base is slightly rounded and at a near right-angle to the rest of the leg. From the base the leg narrows gradually but widens again briefly after about 20mm. Alove and below the wider section there are five linear vertical grooves which are equally spaced around the curving front. This leg would have been one of three on the…
Created on: Tuesday 20th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Over Compton', grid reference and parish protected.


  • Thumbnail image of SOM-C2EC85

Record ID: SOM-C2EC85
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy foot and part of the leg from a cooking vessel. It is roughly D-shaped in section, with flattened reverse and five ribs running down the convex front. The ribs are evenly spaced with one at each outer side. The rounded foot is separated from the leg by a prominent rounded transverse collar on the front. The ribs on the leg are less prominent. The leg is almost vertical when standing flat on the foot. At the top of the leg is a flat cur rather than a break. It measures 43.4mm in length, 30.8mm in width, 19.2mm in thickness and weighs 103.97g. A simil…
Created on: Thursday 28th June 2012
Last updated: Thursday 28th June 2012
Spatial data recorded. This findspot is known as 'Trent', grid reference and parish protected.


  • Thumbnail image of SOM-4A45C4

Record ID: SOM-4A45C4
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy zoomorphic spout of Medieval date, c. AD 1400 - 1500. The spout is from a copper alloy vessel, either a ewer or a laver. The spout is tubular with a zoomorphic head terminal in the form of a dogs head with gaping jaws that clasp a circular tube (7.3mm in diameter) that protrudes from its mouth by 3.19mm and is considerably worn by old breaks. The head iteself consists of a raised brow section which is square in plan which then curves downwards to form the dog's muzzle which takes the form of a small triangular knop with a curved apex. When viewed side on one…
Created on: Monday 17th October 2016
Last updated: Tuesday 25th October 2016
Spatial data recorded. This findspot is known as 'Burstock', grid reference and parish protected.


  • Thumbnail image of SOM-C481AA

Record ID: SOM-C481AA
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Post-Medieval pot leg, dating to the period c. AD 1500-1700. The leg is broadly triangular in cross section, the inner surface being flat and the outer surface formed of five conjoined convex ribs. The leg terminates downward in a flared, hoof-like foot, now very worn, separated from the leg by a raised collar. The object has a grey-green patina. The leg measures 50.3mm in length, 29.9.mm in width, and 15.2mm in thickness and weighs 93.59g. Butler et al (2009: 4) defines this type of pot leg as a type C, which was in use by the 16th century and almost universal du…
Created on: Thursday 9th February 2017
Last updated: Monday 13th February 2017
Spatial data recorded. This findspot is known as 'Castleton', grid reference and parish protected.


  • Thumbnail image of SOM-58D397

Record ID: SOM-58D397
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval cast copper alloy pot foot with a small remnant of the pot attached, dating to c. AD 1500-1700. The foot is triangular in cross-section, tapering downwards. There are three longitudinal, convex raised ribs running down the front, the central rib protruding further than the others (thus forming the triangular cross-section), and extending further up as it joins the remnant of the pot body. The ribs come together towards the base of the foot. The back of the foot is flat. It has an old irregular break at the lower end. The leg widens and spreads outwards towards the pot …
Created on: Thursday 15th February 2018
Last updated: Thursday 15th March 2018
Spatial data recorded.


  • Thumbnail image of SOM-53C5AB

Record ID: SOM-53C5AB
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Possibly a cast copper alloy fragment from a two-part handle from a drinking vessel (probably a tankard) of probable post medieval date (cAD1600 to 1800). The fragment consists only of the thumb rest. One end is a square based straight sided flat plate with two holes with the broken copper alloy rivets still in place. Above this, along the straight top edge, is the groove for the thumb rest bar. The piece then has a sub-rectangular flat tab with convex curved outer sides and corners which narrow in the centre of the outer edge to form a rounded knop. In the centre of the thumb rest bar…
Created on: Tuesday 26th February 2019
Last updated: Thursday 7th March 2019
Spatial data recorded. This findspot is known as 'Haydon', grid reference and parish protected.


  • Thumbnail image of SOM-A8CF36

Record ID: SOM-A8CF36
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a copper alloy item, probably part of the side of a large cast vessel. The fragment is irregular in shape with very worn breaks on all sides. One face has a raised ridge, a casting seam running down it, the ridge has been fettled. In profile the piece is slightly concave so the edges at each end of the casting seam curve upwards and the centre curves downwards. Cracking on the back suggests some of this is due to damage but the way the piece thickens slightly towards these edges suggests some might be original curvature. The piece is 36.7mm long, 34.7mm wide and 4.4mm thick…
Created on: Tuesday 14th May 2019
Last updated: Tuesday 14th May 2019
Spatial data recorded.


  • Thumbnail image of SOM-FAFAB7

Record ID: SOM-FAFAB7
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Medieval or Post Medieval cast copper alloy pot leg, 1200-1700 AD. The leg is trapezoid in section with a wider front than back and a central raised rib running down the front. It has an old irregular break at the upper end. and has lost part of one side to a break or mis-casting; there are also several holes in the front from mis-casting The leg widens outwards at the base to create the plain trapezoid foot. The foot has an irregular front edge and may have been intended to have rounded front corners and an indented curved front with a central projection at the end of the rib but w…
Created on: Friday 26th November 2010
Last updated: Monday 6th December 2010
Spatial data recorded. This findspot is known as 'Piddlehinton', grid reference and parish protected.


  • Thumbnail image of SOM-E96EB1

Record ID: SOM-E96EB1
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy pot foot and part of the leg. The leg is D shaped in section with a flat back; it is broken off just above a transverse collar with an old break. The foot is also D shaped in section with five moulded 'toes' running down the front giving a scalloped lower edge and a flat back. The base of the foot is flat and would mean the leg sat at c.80 degrees to vertical. It is 39.5mm long, 22.4mm wide and 16.6mm thick; it weighs 41.74 grams. Cast copper alloy vessels were widely used from c.1200-1700 for serving and cooking. Butler et al (2009:4) suggest there…
Created on: Thursday 25th November 2010
Last updated: Monday 6th December 2010
Spatial data recorded. This findspot is known as 'East Stoke', grid reference and parish protected.


  • Thumbnail image of PUBLIC-05B43B

Record ID: PUBLIC-05B43B
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval copper-alloy zoomorphic spout in the form of a dog's head dating to the period c. AD 1400 - 1500. The spout is from a ewer and exhibits a small section broken off at the base where is would have been attached to the body of the vessel and a small hole in the underside. The mouth of the spout protrudes from the open mouth of the dog's head. It has moulded eyes and stylised ears on either side of the head, the details of which are slightly worn. It has a green/brown patina and is slightly pitted in areas. Length: 73.80 mm, thickness: 20.92 mm, width: 23.68 mm, …
Created on: Wednesday 9th September 2015
Last updated: Tuesday 29th September 2015
Spatial data recorded. This findspot is known as 'Nether Compton', grid reference and parish protected.


  • Thumbnail image of PUBLIC-4AB701

Record ID: PUBLIC-4AB701
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A incomplete cast copper-alloy domestic vessel dating to the Medieval to Post-Medieval periods, (circa AD 1250-1750) A fragment of rim, probably from a cauldron or skillet. The rim internally is thickened and externally straight walled. The vessel is thin walled and the breaks are sharp indicating recent damage. The curvature of this vessel suggest a diameter of circa 200 mm which would of made this vessel very delicate and fragile in construction. Externally the finish is scored and pitted and there appears to be no sooting, internally the surface is very smooth and appears to have b…
Created on: Sunday 25th January 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-786F63

Record ID: PUBLIC-786F63
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy vessel handle missing its terminal. The handle still retains its two fixing rivets, with an attached fragment of the copper-alloy vessel. File marks are evident and the casting is not symmetrical. The handle has a mottled olive green patina. Probably of post-Medieval date, but no parallel has been traced. Dimensions are: Vessel fragment behind rivets c.1mm, Length 132 mm, Width at attachment end 30.1 mm, Width at terminal end 13.1 mm, Thickness 7.1 mm, Weight 124grams.
Created on: Friday 9th July 2010
Last updated: Tuesday 17th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-968D21

Record ID: PUBLIC-968D21
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The lower portion of a leg from a cast copper-alloy cooking vessel. The leg base is sub-triangular and the upper edge is sub-oval in cross section.The outer face of the leg has a prominent vertical ridge which is triangular in section and tapers towards the base. There is evidence of sooting. Due to its size,it is probably from a cauldron. These are problematic to date closely when found out of contex as they were used over a long time span; however, it almost certainly dates from the Late Medieval to post-Medieval periods. See WAW 12EF35 for a similar example.
Created on: Friday 4th June 2010
Last updated: Wednesday 11th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-53FAC3

Record ID: PUBLIC-53FAC3
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy vessel leg of medieval to post-Medieval date, circa 1250-1750. In plan, the leg is sub-rectangular, with a rounded lower edge and broken upper edge. The break is not recent. The leg is of D-shaped cross section, there is a transverse collar to the upper end, and a central faint vertical ridge running down the front, (possibly a mould line). The leg is hoof like in appearance and has a mottled green/black patina. The object is probably from a skillet, ewer or cauldron. Height of leg: 32.66 mm Width: 26.04 mm. Thickness: 16.34 mm. Weight: 47 grams. Reference Pas WAW-7E20A5.
Created on: Sunday 25th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-34F5F5

Record ID: PUBLIC-34F5F5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy domestic vessel rim fragment from the Medieval to post-Medieval periods, circa 1250-1750. The rim is beaded internally and has a straight wall on the outer face. The piece has a matt-green patina which extends to the well worn breaks. Height of vessel: 23.68 mm. Width: 24.67 mm. Thickness: 2.93 mm. Weight:8.267 grams.
Created on: Saturday 24th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-A933F7

Record ID: PUBLIC-A933F7
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy rim from a domestic cooking vessel of circa1250-1750.The rim is thickened, with the top angled outwards creating a sharp rim. The curvature of the section suggests the bowl had a diameter of approximately 200-220 mm. All the breaks are well worn.and both surfaces have evidence of sooting and a green patina. Width of rim: 44.86 mm. Thickness at rim: 5.17 mm. Height: 27.27 mm. Weight: 25 grams.
Created on: Saturday 17th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-260A71

Record ID: PUBLIC-260A71
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy domestic cooking vessel leg of medieval to post-Medieval date, circa 1250-1750. In section, the leg is roughly eliptical,with a prominent vertical ridge to the front. This is a centre section of the leg with old breaks to each end which are smoothed and have a green patina. Externally from the breaks there is a coating of soot which is a common feature with open fire cooking. Height of leg: 38.83 mm Thickness: 19.96 mm. Weight: 140 grams.
Created on: Sunday 11th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-4C3542

Record ID: PUBLIC-4C3542
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy rim fragment from a domestic cooking vessel from the Medieval to post-Medieval periods, circa 1200-1650 . The fragment is thin walled,with a simple outward angled rim. The breaks are worn and there is evidence of sooting to both surfaces. Height: 21.07 mm. Width: 20.21 mm. Thickness: 3.57 mm. Weight: 6.424 grams.
Created on: Sunday 7th December 2014
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-4BF15E

Record ID: PUBLIC-4BF15E
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy rim fragment from a domestic cooking vessel from the Medieval to post-Medieval periods, circa 1200-1650 . The fragment is thin walled with an inverted rim of D-shaped cross section. The breaks are smooth, with a green patina and the exterior has evidence of sooting. Height:14.11 mm Width: 38.08 mm. Thickness 2.58 mm. Weight 7.407 grams.
Created on: Sunday 7th December 2014
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 93
Search server index: asgard

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 93
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

1 - 40 of 93 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.