Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Dorset
    • Sort: workflow
    • Primary material: Copper alloy
    • Show this many records per page: 40

  • Image not taken

Record ID: SOM-074143
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy coin, either a radiate or a nummus, dating to the period AD 260 to 402. Reverse type uncertain. Mint uncertain.
Created on: Thursday 6th December 2012
Last updated: Thursday 3rd January 2013
Spatial data recorded. This findspot is known as 'Near Frampton', grid reference and parish protected.


  • Thumbnail image of SOMDOR1124

Record ID: SOMDOR1124
Object type: RAPIER
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment of copper alloy rapier blade, from close to the tip as it is gently tapering. Elongated oval section with a flat topped central rib running along the length. Slightly bent.
Created on: Monday 30th July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET WARMWELL', grid reference and parish protected.


  • Thumbnail image of SOMDOR1053

Record ID: SOMDOR1053
Object type: COIN
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Contemporary copy of a South Western uninscribed stater.
Created on: Monday 9th July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET SIXPENNY HANDLEY', grid reference and parish protected.


  • Thumbnail image of SOMDOR1121

Record ID: SOMDOR1121
Object type: BROOCH
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy annular brooch. Hexagonal frame with constriction for pin (pin missing). On the front it is decorated at each of the corners - the frame is thickened and on two diagonally opposite corners are two circular recesses (for enamel or stones), at the others are small moulded zoomorphic heads. The back is flat and undecorated.
Created on: Monday 30th July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET PUDDLETOWN', grid reference and parish protected.


  • Thumbnail image of SOMDOR1032

Record ID: SOMDOR1032
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy gaming piece - copying 18th century spade half-guinea. Production was banned in 1885
Created on: Monday 9th July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET PENTRIDGE', grid reference and parish protected.


  • Thumbnail image of SOMDOR1161

Record ID: SOMDOR1161
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy hooked tag with niello inlay decoration. Isosceles triangular tag with two attachment holes at the top. At the bottom (i.e. the apex of the triangle)is a thickened stub of a hook. The front of the hook is decorated with a curvilinear/foliate design in niello with a framing border of short lines. The back is flat and undecorated.
Created on: Wednesday 12th September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET OSMINGTON', grid reference and parish protected.


  • Thumbnail image of SOMDOR197

Record ID: SOMDOR197
Object type: SPEAR
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy spear tip. Off centre central rib. Diamond shaped section.
Created on: Wednesday 13th October 1999
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET WEYMOUTH', grid reference and parish protected.


  • Thumbnail image of SOMDOR190

Record ID: SOMDOR190
Object type: BROOCH
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Single piece brooch. Very narrow bow. The bow is leaf shaped, tapering to a pointed foot. Small catchplate remains. The bow is decorated with an incised central line with diagonal lines either side at the top end of the bow. The spring is of round sectioned wire, two coils remaining on the left side and broken off at the end of the chord.
Created on: Wednesday 13th October 1999
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET OWERMOIGNE', grid reference and parish protected.


  • Thumbnail image of SOMDOR1357

Record ID: SOMDOR1357
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy terret ring. D-sectioned copper alloy loop. Sub-circular with two rounded projections flanking a constriction at one side. Sally Worrell writes: Although this record has no image and a limited description, and therefore appears to be of little use, it has been retained on the database in the hope that it will be of use to someone.
Created on: Monday 29th October 2001
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'DORSET PIDDLEHINTON', grid reference and parish protected.


  • Thumbnail image of SOMDOR1353

Record ID: SOMDOR1353
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy oval lipped frame with attached sheet metal plate. The bar of the frame is offset and narrowed. The plate is of sheet copper alloy folded over the bar to form a front and back plate. The plates are of tapering rectilinear shape, notched for the frame. It has a rectangular notch for the pin. There are four rivet holes (two at each end. The front plate is decorated with a repousse zoomorphic design - four legs and a raised head and tail - on a field of dots. There are traces of gilt on the plate.
Created on: Monday 29th October 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'DORSET WEYMOUTH', grid reference and parish protected.


  • Thumbnail image of SOMDOR200

Record ID: SOMDOR200
Object type: BUCKLE
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buckle frame and plate. Mid green patina. Simple oval frame with integral plate. Front surface of the plate densely decorated with ring and dot punching. Frame is also decorated in this way. Retains two copper alloy rivets for attachment to belt. Date: Probably Roman - 1st to 4th century
Created on: Wednesday 13th October 1999
Last updated: Monday 4th February 2013
Spatial data recorded. This findspot is known as 'DORSET TARRANT RUSHTON', grid reference and parish protected.


  • Thumbnail image of SOMDOR788

Record ID: SOMDOR788
Object type: BRACELET
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
2 refitting fragments of a middle bronze age ribbed bracelet. Five ribs, more or less evenly spaced. The outer two ribs form an everted flange around either edge. The central rib has an angular crest and is higher than the two flanking it. These two also have angular crests and are decorated with transverse incised notches. The back/inside of the bracelet is fairly flat but there are traces of the ribs.
Created on: Thursday 23rd November 2000
Last updated: Friday 1st April 2011
Spatial data recorded. This findspot is known as 'DORSET PUDDLETOWN', grid reference and parish protected.


  • Thumbnail image of SOMDOR452

Record ID: SOMDOR452
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy strap end. Zoomorphic terminal. Tapering shape. Two rivets for attachment at split end.
Created on: Thursday 11th May 2000
Last updated: Monday 25th January 2016
Spatial data recorded. This findspot is known as 'Weymouth', grid reference and parish protected.


  • Thumbnail image of DOR-CFB735

Record ID: DOR-CFB735
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of Constantius II dating to AD 330 - 335 (Reece period 17). GLORIA EXERCITVS (two soldiers and two standards) reverse. Date: Late Roman - AD 330 - 335 Diameter: 14.36 mm Weight: 0.94 g Die axis: 2
Created on: Wednesday 21st November 2012
Last updated: Thursday 13th December 2012
Spatial data recorded. This findspot is known as 'Fifehead Magdalen', grid reference and parish protected.


  • Image not taken

Record ID: SOM-0747F4
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy coin, either a radiate or a nummus, dating to the period AD 260 to 402. Reverse type uncertain. Mint uncertain.
Created on: Thursday 6th December 2012
Last updated: Thursday 3rd January 2013
Spatial data recorded. This findspot is known as 'Near Frampton', grid reference and parish protected.


  • Thumbnail image of SOMDOR-E06048

Record ID: SOMDOR-E06048
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A small cast copper alloy object identified by Geoff Egan as a pendant component from a medieval horse harness pendant. The object is 20.28mm in length, 17.82mm wide and 7.55mm thick. It weighs 5.08g. At the proximal end there is a circular loop which is set at 90 degrees to the rest of the object. Below this is tear drop shaped shaft, also set at 90 degrees. From the base of this two spheres project, one to each side. Both are decorated with a moulded outwards-facing X shape. The object would have been suspended from a harness mount, possibly with other pendants.
Created on: Wednesday 18th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'West Stafford', grid reference and parish protected.


  • Image not taken

Record ID: SOMDOR-FA33D1
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A probable medieval horse harness pendant component, cast in copper alloy with enamel decoration. The object is globular, 9.66mm in diameter at its widest point and narrows gradually. It superficially resembles an Anglo-Saxon pinhead, however at the thin end there are the worn remains of a suspension loop. The object is decorated with 13 small concave depressions, which are fairly regularly spaced in three lines (the upper of 5, the central line of 5 and the line closest to the loop of 3). Most of the depressions contain enamel, which has degraded to a creamy colour. The harness pendan…
Created on: Thursday 19th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-0B1D95

Record ID: SOMDOR-0B1D95
Object type: BELL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The upper half of a spherical bell, probably medieval in date. The bell has been cast from copper alloy, which has a high lead content judging by the silvery appearance. The hollow bell would have been spherical in shape, with a diameter of 29.76mm. The surviving half is 26.41mm tall, it weighs 26.64g and its body is around 3.25mm thick. The bell has a rounded integrally cast lug on the apex, 13.39mm by 9.61mm, with central circular hole for suspension. Inside the bell there is a thin loop of copper alloy below the suspension lug which would once have supported the now missing clapper.…
Created on: Friday 20th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-FABD92

Record ID: SOMDOR-FABD92
Object type: STRAP END
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy three piece strap end with sheet spacer, probably of fourteenth century date. The strap end consists of a sheet back plate which extends the whole length of the object, including the terminal, a central sheet spacer which occupies the whole width of the object but only extends for about two thirds of its length, and a sheet front plate, which extends only to the terminal. The three components are held together by four copper alloy rivets, all still in situ. Three are located towards the proximal end (for the strap) and the other is towards the distal end, just before the…
Created on: Thursday 19th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-4BCF01
Object type: BRACELET
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a possible hinged copper-alloy bracelet, brooch or other item of personal adornment of Roman date. This is a tapering, D-sectioned, cast fragment with a narrowed, pierced tang at the wider/proximal end. It is broken at the distal end. The object is curved with a convex front. There is a small triangle of blue enamel inset on the mid line of the main body of the object, towards the distal end. The point of the triangle is towards the distal end. The back is undecorated. The tang projects from the middle of the wide end of the object in the same plane as the main body. The s…
Created on: Monday 23rd January 2006
Last updated: Thursday 26th January 2017
No spatial data available.


  • Image not taken

Record ID: SOMDOR-4D6A44
Object type: KEY (LOCKING)
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Probable copper-alloy handle of Roman date, possibly a key handle in an elaborate turned baluster style. The top is a flat circular disc with a flat-topped projection in the centre. The shaft of the handle tapers below, then flares out to a more oval sectioned knop with a slight ridge above and below. Below this is a short constriction before the shaft widens slightly again. After this there are no further knops or constrictions, but the (oval-sectioned) shaft gentle tapers towards the attachment end and is decorated with irregularly spaced deep girth grooves for much of its length. T…
Created on: Monday 23rd January 2006
Last updated: Thursday 26th January 2017
No spatial data available.


  • Thumbnail image of SOMDOR-0FBD73

Record ID: SOMDOR-0FBD73
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The front of a sheet copper alloy plate from a medieval buckle. The plate is almost square, measuring 28.51 by 26.18mm by 0.57mm thick, and it has been broken at the end which would have wrapped around the buckle hoop. The back of the plate is missing. There are three perforations for the rivets which would have held a leather belt in place. Two are close to the corners of the end furthest from the buckle and one is in the centre at the end closest to the buckle. The front of the plate is decorated with short engraved parallel lines. This is in the form of a square around an 'X'. The p…
Created on: Friday 20th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-4B6FD2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy single loop buckle of medieval date. The frame is oval and flat with a narrowed, offset bar. The outer edge is curved, wide at the mid-point and tapering as the sides curve around to joint the bar. The ends of the frame are squared and decorated on one side with incised lines running parallel to the bar. The bar has a rectangular profile. The wide outer edge of the frame has a pin notch across it, which is flanked by a band of incised cross hatched decoration on each side. The back of the brooch is flat and undecorated. There are traces of iron corrosion on the bar…
Created on: Monday 23rd January 2006
Last updated: Thursday 26th January 2017
No spatial data available.


  • Thumbnail image of SOMDOR-119C22

Record ID: SOMDOR-119C22
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A small cylindrical object, cast from copper alloy, which is probably the end cap (pommel) from a sixteenth century knife. The object measures 12.55mm in diameter and 11.81mm in length. It weighs 9.14g. Iron corrosion from the knife blade fills a narrow and shallow slot through the centre of one end. In the centre of the other end there is a circular concave depression, 4.5mm in diameter. Lines of stamped annulets are faintly visible around this depression and on the side of the cylinder. There are also two parallel lines which run around both the top and bottom of the side. The upper …
Created on: Friday 20th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-A082F6

Record ID: SOMDOR-A082F6
Object type: KNIFE
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy tanged knife of late Bronze Age date. The knife measures 141.15mm in length, 21.87mm in maximum width and 3.9mm in maximum depth. It weighs 49.87g. It has a rounded tip and widens only slightly along the length of the blade. It then narrows to the damaged tang, which is 16.18mm wide at this point and narrows to 14.22mm. The length of the tang is about 22.5mm. The object's mid olive green patina is patchy and much of the surface has flaked off. Similar knives have been found at Maesbury Camp, near Wells in Somerset and at Bilbury Rings in Wiltshire. The Maesbury Camp…
Created on: Friday 27th January 2006
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of SOMDOR-792658

Record ID: SOMDOR-792658
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The cast copper alloy end cap from a small sixteenth century knife, measuring 13.8mm by 13.56mm by 4.74mm and weighing 3.02g. The end cap is loosely trapezoidal, with a wider distal end which consists of three perforated lobes. Beneath these lobes a small lip protrudes from each side and below this point there is a longitudinal slot which contains the remains of an iron tang. There are traces of gilding on one side of the end cap. A similar knife end cap has been found at Covehithe in Suffolk (SF-5F44B4).
Created on: Wednesday 25th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Tarrant Hinton area', grid reference and parish protected.


  • Thumbnail image of SOMDOR-79D045

Record ID: SOMDOR-79D045
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper-alloy nummus of Constantine II (AD 317-340) dating from the period AD 330-35 (Reece period 17). GLORIA EXERCITVS reverse type depicting two soldiers with two standards. Mint uncertain.
Created on: Wednesday 25th January 2006
Last updated: Friday 21st October 2016
Spatial data recorded. This findspot is known as 'Hinton St Mary', grid reference and parish protected.


  • Thumbnail image of SOMDOR-D12EB3

Record ID: SOMDOR-D12EB3
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Part of one half of a probable sheet copper alloy two-piece dress fastener, probably of seventeenth century date. The fastener would have formerly had three holes for sewing onto cloth, one at the distal end and one on each side. Just one of the side holes survives intact. The end hole has broken off entirely. Because the hook or loop at the proximal end is missing, it is not possible to say which half of the two-piece fastener this object represents. The engraved decoration on the front of the fastener consists of a tall flower with stem and side leaves, and ring and dot decoration ar…
Created on: Thursday 5th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Puddletown area', grid reference and parish protected.


  • Thumbnail image of SOMDOR-D06333

Record ID: SOMDOR-D06333
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A 16th century trade token farthing produced by Richard Strangar of Tiverton.
Created on: Thursday 5th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Puddletown area', grid reference and parish protected.


  • Thumbnail image of WAW-4B7FA1

Record ID: WAW-4B7FA1
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The object is a vessel lid. It is sub circular in plan, with a sub-semi circular platform protruding from one edge. There are at least 5 very small angular protrusions which are probably decorative. The upper surface is slightly convex, the under surface is concave. Only the upper surface is decorated. The decoration is in the form of ‘ring and dots’ forming a border around the edge, and an inner circle which has trefoils of ‘ring and dot’ designs in the centre. There are also two fine concentric grooves between the inner and outer ‘ring and dot’ borders. The semi-circular …
Created on: Friday 11th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-C721B7

Record ID: SOMDOR-C721B7
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Late 3rd century barbarous radiate. Probably as Reece and James nos. 24 or 25, which date from AD 269-74.
Created on: Thursday 17th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Bradford Peverell', grid reference and parish protected.


  • Thumbnail image of WAW-47C0A3

Record ID: WAW-47C0A3
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A farthing of Charles I.
Created on: Friday 11th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-B45488

Record ID: SOMDOR-B45488
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Roman disc brooch, probably dating from the 2nd century AD. The disc brooch is circular with a very slightly convex front and eight evenly spaced oval peripheral lugs. Its diameter, including the lugs is 36.65mm, it is 2.92mm thick and weighs 12.59g. One lug is broken but the others are all decorated with one incised ring and dot. One of the central dots is perforated, although this appears to be the result of wear rather than an original feature. From what remains of the broken lug, it was deliberately perforated (hence it is broken but the others are not). The decoration on the mai…
Created on: Thursday 9th February 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


  • Thumbnail image of SOMDOR-B4FC92

Record ID: SOMDOR-B4FC92
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy seal matrix, probably dating from the fourteenth century. The seal is vesica shaped (oval with pointed ends). It is 37.19mm in length, 22.08mm in width, 2.86mm thick and weighs 10.43g. Behind one of the pointed ends there is a small perforated lug, 8.67mm by 5mm by 3.56mm. The legend around the edge of the seal reads S' MARIE DE HERTFORDE and in the centre there is a depiction of a running stag and some foliage. There are traces of gilding on both sides of the seal matrix.
Created on: Thursday 9th February 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


  • Thumbnail image of ESS-16F6A6

Record ID: ESS-16F6A6
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Complete post-medieval copper alloy signet ring. The ring weighs 6.02g, has an external diameter of 25.52mm and an internal diameter of 21.90mm. The hoop is 2.82mm wide and 1.86mm thick. The bezel of the ring is oval in shape, being 17.48mm long and 8.98mm wide and is integral to the ring, not cast separately. It is crudely decorated with a grooved line border, within which is the letter W. The letter W reads correctly both ways, but had this been another letter, it would have been shown in negative, so as to appear the right way round once impressed into wax. Normally we would expect …
Created on: Thursday 17th June 2004
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Blackmore', grid reference and parish protected.


  • Image not taken

Record ID: SOMDOR-6B9D65
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper-alloy nummus of the House of Constantine I dating from the period AD 318-24 (Reece period 16). BEATA TRANQVILLITAS reverse type depicting a globe on an altar inscribed VOTIS XX. Mint uncertain.
Created on: Monday 21st June 2004
Last updated: Thursday 12th January 2017
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-6BBDA7
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Rose farthing token of Charles I
Created on: Monday 21st June 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-6BD8A2
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Royal farthing token of Charles I
Created on: Monday 21st June 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-BFC6D2
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper-alloy nummus of Constantius II dating from the period AD 348-50 (Reece period 18). FEL TEP REPARATIO reverse type depicting a soldier advancing right, leading a figure from a hut. Mint uncertain. The reverse appears to be off-struck.
Created on: Friday 25th June 2004
Last updated: Saturday 15th October 2016
No spatial data available.


  • Thumbnail image of SOMDOR-3C18D2

Record ID: SOMDOR-3C18D2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy hooked mount. It is a triangular plate with a backward hook at the apex. The hook has a rectangular sectioned shaft. The plate has a slight notch in the edge opposite the apex. There are two iron rivets set longitudinally in the centre of the plate. The back is flat and undecorated.
Created on: Wednesday 7th April 2004
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 7,507
Search server index: objects

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 8,509
  • Mean quantity: 1.133
  • Maximum: 303

Filter your search

1 - 40 of 7,507 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.