Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Dorset
    • Page: 7
    • Show this many records per page: 100

  • Thumbnail image of DOR-655901

Record ID: DOR-655901
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Knee brooch. The wings are short with integral pierced end caps to house the axis bar of the sprung pin mechanism.The wings and end caps form a rounded box to contain the spring. The spring has two coils on either side of the integral pin and an arched chord below. The pin is shorter than the bow of the brooch and tapers to a sharp point. At the top of the wings is a small headloop with a circular aperture. The D-sectioned bow projects from the bottom of the wings and tapers downeards before flaring into a flat-based, oval foot. There is a slight central longitu…
Created on: Wednesday 29th August 2018
Last updated: Wednesday 29th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-553B92

Record ID: DOR-553B92
Object type: FLAKE
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A secondary flint waste flake produced during the process of lithic reduction. The flake is sub-oval with a trapezoidal cross section. Thick nodular cortex remains along the right side margin of the dorsal face showing through to the left side margin of the ventral face.The flint is semi-translucent and mid-brown with a low-gloss patina. The dorsal face shows broad flake removal scars with strong rippling. The ventral face shows a prominent bulb of percussion and terminates in a hinge fracture indicating probable use of a hard hammer.Date: Late Neolithic to early Bronze Age 3300 BC to …
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-5538AC

Record ID: DOR-5538AC
Object type: FLAKE
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A secondary flint waste flake produced during the process of lithic reduction. The flake is sub-oval with a trapezoidal cross section. Thick nodular cortex remains at the distal end of both faces.The flint is semi-translucent and mid-brown with a mid-gloss patina. The dorsal face shows broad flake removal scars with strong rippling. The ventral face shows a prominent bulb of percussion with rippling indicating probable use of a hard hammer. Date: Late Neolithic to early Bronze Age 3300 BC to 1600 BC. Dimensions:
Created on: Tuesday 28th August 2018
Last updated: Sunday 16th September 2018
Spatial data recorded.


  • Thumbnail image of DOR-55338E

Record ID: DOR-55338E
Object type: RETOUCHED FLAKE
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A retouched flint blade flake. Sub-oval with a rounded distal end, the proximal end has been snapped and it has a trapezoidal cross section. The flint is semi-translucent mid-grey and has a mid-gloss patina. The dorsal face shows three linear blade flake removal scars and very fine scaled, semi-abrupt retouch along the right side margin and distal end. The ventral face is concave and shows no apparent bulb of percussion indicating probable use of a soft hammer. Date: Neolithic - c 4000 BC to 2350 BC. Dimensions: 37.5mm x 22.9mm x 4.4mm. Weight: 5.5g.
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-552CD8

Record ID: DOR-552CD8
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A double ended flint end scraper. It is sub-oval with thick nodular cortex remaining across 70% of the dorsal face. The flint is semi-translucent mid-grey and has a mid-gloss patina. The retouch to the dorsal face is short, scaled and abrupt at the distal end where the cortex has been removed. The retouch to the proximal end and lower left and right margins is scaled and semi-abrupt. The ventral face is flat and shows no apparent bulb of percussion, however there are visible ripples indication the direction of percussion. Date: Mesolithic (possibly) to Neolithic 10000 BC to 2350 BC. Di…
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-5520D3

Record ID: DOR-5520D3
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A rounded scraper tool manufactured on a large secondary flake of flint. The scraper is sub-oval with thick nodular cortex remaining on approximately 80% of the central dorsal face and some small areas along the left side margin.The flint is opaque, mid to light grey and mottled with a low-gloss patina, some areas of ferrous iron staining are visible. The retouch to the dorsal face is long, sub-parallel and abrupt around the distal end and left side margin, the right side margin has a long and straight hinge fracture running from the distal end to half way down the tool, there is a sli…
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-550FEA

Record ID: DOR-550FEA
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy stirrup strap of Williams Class A, unclassified type. The mount is sub- triangular with one short straight edge (horizontal) and two long convex edges converging at the broken trilobed apex, the central aperture loop is now incomplete. The decoration is very worn and indistinct. It comprises several irregular shaped indentations, four arranged in a square with one in the centre and others scattered around the rest of the mount. On the reverse at the base of the mount is a rearward projecting flange. Above this is an extensive area of iron corrosion. There is …
Created on: Tuesday 28th August 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of DOR-550053

Record ID: DOR-550053
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead medieval pilgrim's badge of St Anne, dating to c.1400-1500. Probably from her shrine at Buxton, Derbyshire, but relics of St Anne were also claimed by Canterbury, Reading and Durham, and so it may alternatively have been produced at one of these places. The badge depicts St Anne teaching her daughter, the Virgin Mary, to read. St Anne and the Virgin Mary are both depicted wearing long dresses or robes. St Anne is wearing a veil or headdress. The Virgin Mary is depicted as being slightly smaller than St Anne. On the reverse is a bent, long and tapering integral attach…
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-54D16D

Record ID: DOR-54D16D
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy bow brooch of Aesica type. The pin and part of the wings are missing. The short open wings concealed the missing bar for the mechanism for the pin. The axis bar would have passed through a circular aperture in the rearward lug which projects from behind the middle of the wings. There are traces of iron corrosion product on this lug and the wings, indicating an iron axis bar. The head projects forwards from the top of the wings before curving back in to join the main body of the bow. It has a ridged longitudinal crest at the top with an oval aperture through i…
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-54C5F3

Record ID: DOR-54C5F3
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A flint rounded scraper tool dating to late Neolithic to early Bronze Age date. The scraper is sub-oval with a trapezoidal cross section and is manufactured on a tertiary flake. The flint is semi-translucent mid-grey with a mid-gloss patina. The dorsal face has a large oval light grey less silaceous area in the centre. The retouch around the dorsal face margins is long, scaled and semi-abrupt, this extends around 75% of the sides and proximal end. The ventral face has a prominent bulb of percussion with bulbar scar and rippling indicating probable use of a hard hammer. Date: 3300 BC to…
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-54B989

Record ID: DOR-54B989
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Published Find published
A fragment of copper alloy palstave. The blade end only. The blade is rectangular in cross-section. The cutting edge is flared and curving. There is a slight curving ridge on both faces across the body of the axe, behind the cutting edge The blade thins gradually from the break to the cutting edge. Date: Middle Bronze Age - 1600 BC to 1000 BC. Dimensions:45.1mm x 50.8mm x 13.8mm. Weight: 126.16g.
Created on: Tuesday 28th August 2018
Last updated: Monday 7th January 2019
Spatial data recorded.


  • Thumbnail image of DOR-5471D2

Record ID: DOR-5471D2
Object type: FLAKE
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A tertiary flint waste flake produced during the process of lithic reduction. The flake is sub-triangular with a triangular cross section. The flint is mid-brown and is covered almost entirely with a thin blue/white speckled re-cortification. The dorsal face shows broad flake removal scars with strong rippling. The ventral face shows a prominent bulb of percussion with rippling and terminates at the distal end in a hinge fracture indicating probable use of a hard hammer. Date: Neolithic to early Bronze Age - c. 4000 BC to 1600 BC. Dimensions: 49.4mm x 38.2mm x 9.9mm. Weight: 22.79g.
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-5465A5

Record ID: DOR-5465A5
Object type: KNIFE
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A flint knife. The knife is sub-oval with a rounded squared proximal end and has a largely plano convex cross section. The dorsal face shows covering, scaled, low angle and semi-abrupt flaking. The scars across the central ridge are broader with smaller scars around the margins. The ventral face is smooth and flat towards the distal end with a sight off centre bulb at the proximal end, several large flakes have been removed at the left side proximal end probably an attempt to remove the bulb of percussion. The original colour of the flint is a semi- translucent mid-brown, however the k…
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-544DCE

Record ID: DOR-544DCE
Object type: FLAKED AXEHEAD
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A small flaked axehead. The axe is cordate in shape, oval in cross section and is bifacially worked. Both faces show invasive covering flaking with some flakes terminating in hinge fractures indicating probable use of a hard hammer. The flint is opaque and with a light beige, chalky patina, with multiple areas of less siliceous honey-coloured flint. Areas of ferrous staining are visible mainly on the flake ridges. A remnant of a the striking platform is evident at one end and it is possible the axe was made on a large, naturally fractured piece. Date: Neolithic - c. 4000 - 2350 BC Dime…
Created on: Tuesday 28th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of SOM-53EB7B

Record ID: SOM-53EB7B
Object type: SPEAR
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Iron spearhead of probably late Medieval date. The blade is complete and a broad leaf shape with convex curved sides widening evenly form the point to the rounded base of the blade. A rounded rib runs from the socket about half way along the length of the blade on both sides; the ribs thicken towards the base but appear solid. The blade is otherwise flat and even in thickness. Due to the level of corrosion it is hard to identify the width of the sharpened edges, if any. The socket is conical and tapering, continuing the line of the ribs but only hollow until it meets the blade. The end…
Created on: Tuesday 28th August 2018
Last updated: Friday 28th September 2018
Spatial data recorded.


  • Thumbnail image of SOM-538451

Record ID: SOM-538451
Object type: PURSE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Medieval to Post-Medieval cast copper alloy purse bar dating to c.AD 1450 to 1550. The fragment consists of one arm with an integral spherical terminal surviving for 29.3 mm in length to an old break. The arm is circular in cross-section and measures 5.2 mm in diameter. The terminal is spherical and decorated with six twisting grooves. It measures 11.2 mm in diameter. The piece has a green patina and small areas of superficial corrosion. The fragment measure 29.3 mm in length, 5.2 mm in diameter at the arm and 11.2 mm in diameter at the terminal. It weighs 7.38 g. Ward …
Created on: Tuesday 28th August 2018
Last updated: Thursday 8th November 2018
Spatial data recorded.


  • Thumbnail image of DOR-D3D309

Record ID: DOR-D3D309
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A worn two-part lead alloy cloth seal dating to 1508 -1553. One face of the seal depicts a king enthroned, holding a spear and sceptre with the Arms of England visible on his tabbard. The letter H can be seen between the king's legs with a legend SIG[ILLVM CVS]TOM HENRY VIII. These cloth seals were used for imports of fine patterned cloth. Reference: comparisons are illustrated in the Salisbury Museum Medieval Catalogue volume 3 (Saunders et al. 1991, pg.63, nos.106-108, fig.23). A similar seal found in West Berkshire can be seen on the PAS database: BERK-CE29E4Date: Post Medieval.Diam…
Created on: Wednesday 22nd August 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-D3A5D5

Record ID: DOR-D3A5D5
Object type: DAGGER
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy dagger pommel of Oakshott Type A form, Petersen Type U, dating to c.950 - c.975. A flattened domed semi-circular pommel with a sub-circular slot at the top to accomodate the tang of the missing blade. The underside is open with a pointed oval opening. The domed top is decorated with two incised lines either side positioned towards the edge.Date: Early Medieval.Dimensions: 23.37 mm x 48.72 mm x 16.70mmWeight: 51.05 g
Created on: Wednesday 22nd August 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-D2923C

Record ID: DOR-D2923C
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of copper alloy enamelled bow brooch, probably a variant of Aesica type and categorised as a 'brooch with cylindrical spring-cover' by Bayley and Butcher. The head has one cylindrical wing to hold the axis bar for the hinged pin. The pin is missing. The surviving wing tapers and is rolled around the axis bar. The head of the bow projects forward from the wing. It expands into a large circular boss with a central hole. The boss has four raised knops each with a ridge so forming a cross. The recesses between the arms of the cross contain the remnants of light aqua blue enamel.…
Created on: Wednesday 22nd August 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-ACC818

Record ID: DOR-ACC818
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy developed T-shaped brooch. The pin is missing. The head of the brooch retains two cylindrical wing, decorated at the ends with incised vertical lines. The wings housed the iron axis bar for the hinged pin mechanism and are divided by a central pin slot at the back. There are traces of iron corrosion visible. The bow is arched fron the wings and drops vertically. It is a shallow oval in cross section and tapering.The head is decorated with a a short, central longitudinal ridge with incised angled lines along either side. Below this the bow is decorated with t…
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AC9F98

Record ID: DOR-AC9F98
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy developed T-shaped brooch. The brooch comprises the head, partial wings and part of the bow, The head of the brooch retains one cylindrical wing, the right has broken off) tdecorated at the end with incised vertical lines. The wings housed the missing axis bar for the hinged pin mechanism andare divided by a central pin slot at the back. The head is undecorated with a flanking ridge at each edge.The D-sectioned bow is decorated from below the the head with three incised raised lozenges, the upper and lower of which have a circular recess, probably for enamel…
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AC72A5

Record ID: DOR-AC72A5
Object type: MOUNT
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy enamelled mount. The mount is rectangular and thick with stubs of two integral circular cross-sectioned rivets set along the central, shorter axis at the rear. The front of the mount is decorated with two transverse zig-zag line metal reserves (also along the shorter axis) separated by a central band of reserved metal decorated with an incised line along the middle. In the recesses around the zigzags is enamel infill which may originally have been red. Date: Roman - c. AD 100 - 400 Dimensions: 15.29 mm x 14.43 mm x 7.84 mm Plate thickness - 5.13 mm Weight: 8…
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AC40A8

Record ID: DOR-AC40A8
Object type: BELL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy crotal bell. The bell comprises two hemispherical domes divided horizontally by a circumferential ridge. The upper hemisphere has two circular sound holes. An angular integrally cast suspension loop with off-centre drilled hole projects from the apex of the upper dome. The lower hemisphere has a long, thin sound slit with circular holes at the ends and has a broken hole at one side. The inner iron ball or clapper is in situ. Both hemispheres are decorated. The upper hemisphere has a series of incised flaring ovals set vertically. The lower hemisphere retains …
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AC03DE

Record ID: DOR-AC03DE
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy leg from a cauldron or skillet., broken across the leg. The underside of the foot is D-shaped in cross-section. The leg rises above and is D-shaped in cross-section at the (old) break. A prominent midrib runs along the centre of the leg to the front. The foot is crudely cast and there are numerous voids in the fabric. Date: Medieval to Late Post-Medieval (1200-1800) Dimensions: 52.07 mm x 51.06 mm x 25.71 mm Weight: 221 g Crudely made cast copper alloy vessels were widely used from c.1200-1800 for serving and cooking. Butler and Green (2003; 15) state 'there is evidenc…
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.


  • Thumbnail image of DOR-ABE993

Record ID: DOR-ABE993
Object type: DAGGER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy dagger pommel with lead infill. A domed circular pommel with a rectangular slot at the top to accomodate the tang of the missing blade. The underside is open with the sides tapered in and slightly waisted. In the hollow are remnants of lead infill to weight the pommel to balance the missing blade. The domed top is decorated with a series of incised lines radiating towards the edge.The sides below are decorated with two rows of short incised diagonal lines. Date: Late Medieval to Post Medieval - c. 1480 - 1550 (Ed Wood, pers. comm.)Dimensions: 30.79 mm x 18.39 mm, Wall th…
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.


  • Thumbnail image of DOR-ABBFE5

Record ID: DOR-ABBFE5
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy button. The button is circular with a convex front and concave back. The front of the button is decorated with design of incised lines, punched annulets and crescents. The design comprises an incised equal-armed cross with a central ring and dot and infill in the angles of small stamped annulets towards the centre and groups of stammped crescents (a line of three along the edge with two more forming an arch over the central crescent). A broken central integral rectangular shank projects from the reverse, with a circular drilled perforation.Date: Post Medieval…
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AB9601

Record ID: DOR-AB9601
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy buckle frame. One D-shaped loop and the centre bar only remaining. The frame is D-shaped in cross section. The front face is decorated with a moulded rosetted at the point in the outer edge (a central pellet with seven set around it in a cricle. There is a rounded knop on each side of the loop. The bar is narrowed fron the frame with a D-shaped cross section. At either end of the bar is an acorn-shaped knop.Date: Post Medieval - c. 1550 - 1650 Dimensions: 32.40 mm x 36.66 mm x 2.80 mm Weight: 7.46 gA similar buckle is recorded in Whitehead, R, 1996, Buckles 1…
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AA9F7C

Record ID: DOR-AA9F7C
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver threepence of Elizabeth I (1558 - 1603) dating to 1582. Mint of London. Reference: North Vol 2, 1998 Date: Post Medieval Diameter: 18.83 mm Weight: 1.00 g Die axis: 7
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AA7578

Record ID: DOR-AA7578
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver sixpence of Elizabeth I (1558 - 1603) dating to 1580. Mint of London.Initial mark: Plain cross. Reference: North Vol 2, Date: Post Medieval Diameter: 25.06 mm Weight: 2.08 g Die axis: 1
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AA5AE1

Record ID: DOR-AA5AE1
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver threepence of Elizabeth I (1558 - 1603) dating to 1572. Mint of London. Mint marks: ermine/ermine Reference: North Vol 2, 1998 Date: Post Medieval Diameter: 20.33 mm Weight: 1.27 g Die axis: 4
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of SOM-AA43C7

Record ID: SOM-AA43C7
Object type: STRAP END
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A probably complete Medieval cast copper alloy forked spacer for a composite strap end, dating to c.AD 1280 to 1420. It has a plain acorn knop with a collar dividing the acorn element from the two prongs. It measures 13.3 mm in length and 7.6 mm in width at the point of maximus expansion. The prongs are flat and rectangular in cross section and measure 2.0 mm in width. One prong measures 23.8 mm in length and the other one 18.6 mm. The shorter prong has a deep crack along the cross section. The inner profile of the forked spacer is sub-rectangular with rounded corners. It measures 40.…
Created on: Monday 20th August 2018
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Thumbnail image of DOR-AA3866

Record ID: DOR-AA3866
Object type: COIN
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver penny of Edward I (1272 - 1307) dating to 1280 - 1281. Mint of London. Class 3cd. Reference: North Vol 2, 1018/19 Date: Medieval Diameter: 20.24 mm Weight: 1.32 g Die axis: 11
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-AA10D9

Record ID: DOR-AA10D9
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver Anglo-Saxon sceat (penny) dating to 700 - 765. A secondary phase "Porcupine" obverse, "Votive standard" reverse type. The obverse shos a degenerate radiate bust and the reverse a square standard inscribed TOTII. Reference: Abramson 2012 , Group 94, Variety 10 Date: Early Medieval Diameter: 11.23 mm Weight: 0.98 g Die axis: 4
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A99967

Record ID: DOR-A99967
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of the House of Valentinian dating to AD 364 - 378 (Reece period 19). SECVRITAS REI PVBLICAE (Victory advancing left with a wreath) reverse. T Date: Roman Diameter: 18.21 mm Weight: 2.26 g Die axis: 6
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A97819

Record ID: DOR-A97819
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A contemporary copy of a copper alloy nummus of Magnentius or Decentius dating to AD 350 - 353 (Reece period 18). VICTORIAE DD NN AVG ET CAE (two Victories holding a shield inscribed VOT V MVL X) reverse. The edge of the coin has been clipped, removing the legends. Date: Roman Diameter: 17.57 mm Weight: 1.83 g Die axis: 6
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A94A7C

Record ID: DOR-A94A7C
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of Theodora, wife of Constantius I dating to AD 337 - 341 (Reece period 17). PIETAS ROMANA (Pietas standing, holding two infants) reverse. Date: Roman Diameter: 13.82 mm Weight: 1.78 g Die axis: 12
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A9287D

Record ID: DOR-A9287D
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of the House of Constantine dating to AD 330 - 335 (Reece period 17). Probably GLORIA EXERCITVS (two soldiers and two standards) reverse. Date: Roman Diameter: 15.13 mm Weight: 1.78 g Die axis: 9
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of SOM-A927C5

Record ID: SOM-A927C5
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A complete Medieval cast copper alloy bar mount with a pendent loop, dating to c.AD 1300 to 1400. The bar mount is sub-rectangular in plan, D-shaped in cross section and measures 15.4 mm in length. It widens from the top to the centre and then narrow to end. A single copper alloy rivet holds the bar and its folded end forming a suspension loop to hang the pendent. The pendent loop is an openwork quatrefoil with a D-shaped cross section. It measures 20.5 mm in width and 3.9 mm in thickness at the top. Three lobes have decorative circular knops projecting from their centre. The remain lo…
Created on: Monday 20th August 2018
Last updated: Sunday 2nd September 2018
Spatial data recorded.


  • Thumbnail image of DOR-A8FAC5

Record ID: DOR-A8FAC5
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy radiate of Claudius Gothicus dating to AD 268 - 270 (Reece period 13). IOVI VICTORI (Jupiter standing left holding a thunderbolt and sceptre) reverse. Date: Roman Diameter: 21.51 mm Weight: 2.79 g Die axis: 3
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A8DFE8

Record ID: DOR-A8DFE8
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy radiate of Gallienus dating to AD 260 - 268 (Reece period 13). SOLI CONS AVG (winged horse flying right) reverse. Reference: Cunetio no. 1337 Date: Roman Diameter: 21.95 mm Weight: 4.04g Die axis: 12
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A8C4A6

Record ID: DOR-A8C4A6
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy sestertius of Faustina Junior, wife of Marcus Aurelius (AD 147 - 175) probably dating to AD 161 - 175 (Reece period 8). The reverse is illegible but probably shows a standing figure. Date: Roman Diameter: 31.57 mm Weight: 21.82 g Die axis: uncertain
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A8A390

Record ID: DOR-A8A390
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver denarius of Marcus Aurelius (AD 161 - 180) dating to AD 166 - 167 (Reece period 8). TR P XXI IMP IIII COS III (Providentia standing holding a sceptre and pointing with a rod to a globe at her feet) reverse type. Date: Roman Reference: RIC Vol III, p. 227, No. 170 Diameter: 19.17 mm Weight: 2.55 g Die axis: 12
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A88BFB

Record ID: DOR-A88BFB
Object type: COIN
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper stater of the British Iron Age dating to c. 20 BC to AD 40 . South Western uninscribed (Durotrigian ) type. A stylised wreath on the obverse and a stylised horse on the reverse. Reference: ABC 2175, VA 1290, BMC cf.2790 - 2859 Diameter: 17.32 mm Weight: 2.10 g Die axis: uncertain
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-A86831

Record ID: DOR-A86831
Object type: COIN
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver stater of the British Iron Age dating to c. 60 BC to AD 20 . South Western uninscribed (Durotrigian ) type. A stylised wreath on the obverse and a stylised horse on the reverse. Reference: ABC 2169, VA 1235-1, BMC cf. 2667 Diameter: 19.74 mm Weight: 2.83 g Die axis: uncertain
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of SOM-6D7315

Record ID: SOM-6D7315
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A complete Medieval cast copper alloy rotary key dating to c. AD 1150-1400. The key has a sub-circular bow with a circular central perforation. The bow measures 12.7 mm in diameter and thickens toward the shank. The shank measures 21.7 mm in length and 4.0 mm in thickness. It has a sub-rectangular section and tapers toward to a hollow recessed end. The bit measures 9.4 mm in length and 12.6 mm in width. It is very simple with two opposing notches on the upper and lower edge. The key has a dark green patina. The key is similar to Egan (1998:112) no. 294 but with more squared clefts. An…
Created on: Friday 17th August 2018
Last updated: Sunday 2nd September 2018
Spatial data recorded.


  • Thumbnail image of SOM-6CD936

Record ID: SOM-6CD936
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper-alloy strip-bow brooch dating to c. AD 25 to 70. The head and bow are formed of a single continuous strip. Foot, catchplate and pin are now missing. The head is plan and measures 14.6 mm in width. It is formed by rolling the top of the bow backward to hold an axis bar. On one side the lower part of this rolled section around the bar is now missing to an old break, leaving uncovered part of the copper alloy axis bar still in situ. A sub-rectangular slot has been cut into the reverse to accommodate a hinged pin, now missing. The bow consists of a thin strip o…
Created on: Friday 17th August 2018
Last updated: Sunday 2nd September 2018
Spatial data recorded.


  • Thumbnail image of SOM-6B4F5B

Record ID: SOM-6B4F5B
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Roman silver denarius of Trajan (AD 98-117) dating to AD 112 to 117 (Reece period 5). S.P.Q.R. OPTIMO PRINCIPI reverse type depicting Trajan's column surmounted with statue of the Emperor and two eagles at the base. Mint of Rome. RIC II Trajan no. 292.
Created on: Friday 17th August 2018
Last updated: Tuesday 28th August 2018
Spatial data recorded.


  • Thumbnail image of SOM-59A338

Record ID: SOM-59A338
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A complete Post Medieval cast copper alloy sword belt fitting dating to AD 1500 to 1700. The fitting consists of a plate with a hook-end at one attachment end. The integral hook projects upwards from the centre of the top and curves forwards. It has a convex outer side and a flatter inner side ad measures 3.3 mm in thickness. The hook thins and widens towards the plate. The plate is M shaped in plan with straight upper edge rounded upper corners, vertical sides which are convex at the top then concave in the lower part and pointed outwards lower corners. Also the centre of the lower s…
Created on: Thursday 16th August 2018
Last updated: Tuesday 28th August 2018
Spatial data recorded.


  • Thumbnail image of SOM-592350

Record ID: SOM-592350
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver sixpence of Elizabeth I (1558-1603) dating to AD 1582-1583. Third issue, bell initial mark. Mint of London. North (1991: 137) no.2015. The coin has snapped in half along a fold, the break is patinated.
Created on: Thursday 16th August 2018
Last updated: Tuesday 28th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-3FA667

Record ID: DOR-3FA667
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A possible copper alloy knife or other implement handle. An oval cross-sectioned bar which is solid metal for most of its length. It has a split aperture at one end in which there are remnants of a probable iron blade. Date: Probably Post Medieval - 1500 - 1800 Dimensions: 52.6mm x 9.2mm x 6.6mmWeight: 18.95g
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3F8E48

Record ID: DOR-3F8E48
Object type: AWL
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Published Find published
A copper alloy awl or gouge. The awl has an rectangular cross section. It tapers towards both ends from the centre. Both sides taper on all four faces and terminates in a sub circular sectioned point. One side is slightly bent upwards. Reference: Read.B, 2016, pg.99, no.694. Date: Possibly late Bronze Age 1150 to 800 BC. Dimensions: 67.2mm 5mm 4.6mm Weight: 7.42g.
Created on: Wednesday 15th August 2018
Last updated: Wednesday 27th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-3F8141

Record ID: DOR-3F8141
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Published Find published
An incomplete copper alloy facetted socketed axehead dating to 1000 BC - 800 BC. As we cannot see the collar the axehead can probably be classified as Meldreth type, Ewart Park phase of metalwork. The cutting edge is expanded and relatively undamaged. The sides are faceted, giving a six-sided cross section. The socket mouth is circular although the collar is missing. On the upper part of the axe is a D-shaped, oval sectioned (approx 8mm in depth) attachment loop, it is positioned unusually horizontally instead of vertically probably directly below the missing collar. Date: Late Bronze …
Created on: Wednesday 15th August 2018
Last updated: Sunday 10th February 2019
Spatial data recorded.


  • Thumbnail image of DOR-3F7089

Record ID: DOR-3F7089
Object type: BELL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy crotal bell dating to c.1600 - 1800. The bell comprises two hemispheres divided horizontally by a circumferential ridge. The upper hemisphere has two circular sound holes. A rounded suspension loop projects from the top of the upper hemisphere and has a drilled circular hole. The lower hemisphere has a long, thin sound slit with circular holes at the ends. The inner iron ball or clapper is in situ. There is no apparent decoration although the surface is heavily pitted. Dimensions: 43.39 mm x 34.3 mm Height: 43.3mm Weight: 59.77g.
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3F6207

Record ID: DOR-3F6207
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy pot leg dating to c.1400-1450. The object comprises a semi-cylindrical leg or foot with the curved vessel base at one end and a flat end on which the foot would have rested. Running down the outside of the leg are five moulded vertical ridges with deep grooves between them. Copper alloy vessels were used from the medieval period until the 19th century though cast iron pots became increasingly prevalent from the mid 17th century.Reference: Egan 1998, p.164-165. A similar pot leg can be seen on the PAS database: DOR-A93421Date: Medieval. Dimensions: 60.9mm x 32.6 x 15.9mmW…
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3F4F48

Record ID: DOR-3F4F48
Object type: BEAD
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A probable copper alloy bead, probably leaded bronze. It has a broadly oval cross section with slightly flattened sides. It has a heavy dark green patina which retains traces of possible decoration in the form of moulded cross-hatched ridges on the side faces. The central aperture is circular. Date: Iron Age Diameter: 28.3mm Aperture: 9.87 mm Thickness: 8.61mmWeight: 29.81g
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3F42F3

Record ID: DOR-3F42F3
Object type: KEY (LOCKING)
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy rotary key dating to c.50 AD - c.200 AD The terminal of the key is trilobate, now missing its probable fleur de lis terminal. The stem continues from the terminal into a bulbous area defined by a collar continuing along the stem to where is narrows to accomodate the bit. The stem is hollow and sub-circular in cross section. The bit drops down from the end of the stem at a right angle and has two circular notches at the outer edge. Part of the tip of the stem is missing on one side.The key is similar to a number of key handles (copper alloy handles which …
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3F26F2

Record ID: DOR-3F26F2
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy strap distributor dating to c.1000-1100. It comprises a lozengiform frame and a short bar leading to a central globular knop. The bar is a semi-circular in section. At the end of the bar is a lozengiform frame with a knop at each of the three corners and a central sub-circular aperture. The fitting would have possibly had a decorative central boss which extended into the symmetrical other half which is now missing. The reverse is undecorated, the frame of the terminal loop is hollowed and angled up towards the central circular loop. Reference: Williams, D, 20…
Created on: Wednesday 15th August 2018
Last updated: Monday 7th January 2019
Spatial data recorded.


  • Thumbnail image of DOR-3F190B

Record ID: DOR-3F190B
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy single looped buckle frame with expanded rectangular pin detail dating to a probable medieval to post medieval date. The frame is trapezoidal with a pin looped around its shortest side resting on its longest side. The side around which the pin is looped is plain and narrowed, the three other sides are decorated with knops in the corners, the upper and lower side has a central knop, the side on which the pin rests has three knops spaced at regular intervals, the central more rectangular knop is the pin rest. The pin tapers from the loop and has a rectangular section, it t…
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3F00F1

Record ID: DOR-3F00F1
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy book mount of Howsam type B.1.4, dating to c.1150 - c.1200. The object is lozenge-shaped and has a C-shaped cross-section. There is a flat circular knop at each of the four points; these each have a circular perforation through them. The edge of each side flares out to meet its neighbour at the centre, forming a elongated V-shaped edge. The front of the object has been decorated with a cross formed of three deeply incised grooves, forming two ridges that run from the knops to the centre. Overlying this is a cross consisting of two incised grooves with a central…
Created on: Wednesday 15th August 2018
Last updated: Monday 21st January 2019
Spatial data recorded.


  • Thumbnail image of DOR-3EF3DD

Record ID: DOR-3EF3DD
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An copper-alloy belt loop slide dating to c.1750 - c.1900. The strap fitting is sub rectangular in section, and a flattened 'U' shape in profile. The top is rectangular, with rounded corners. It has been decorated by a series of four incised lozenges joining at their tips. Remnants of an iron or rivet are present in the centre of each projecting side. The rear face and sides of the strap fitting are plain and undecorated. There are traces of gilding across the upper surface. Similar objects can be seen on the PAS database: IOW-155AE3, LVPL-8894ED Date: Post Medieval. Dimensions: 33.2 m…
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3ED86E

Record ID: DOR-3ED86E
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy strap fitting. A purse hanger. The object comprises a large hook extending into a rectangular frame with one aperture. The hook has a backward projecting terminal at the top of the arm below which is a recessed section with a possible cross hatched decoration. The hook then widens into a D sectioned curve before expanding into the rectangular frame. The frame is set in the same alignment as the arm so that it extends backwards. Date: Late Medieval - Early Post Medieval c. 1450 -1550Dimensions: 41.5 mm x 29.5 mm x 8.4 mmWeight: 12.51gIdentified by David Williams as a…
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-3E9A7C

Record ID: DOR-3E9A7C
Object type: STRAP FITTING
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An unusual Carolingian-style copper-alloy strap slide probably dating to c.800 - c.1000. It is cast in one piece, in the shape of a plain rectangular loop which is now slightly bent with one long side expanded into a hollow and domed decorative rectangular plate. This is convex with a hollow back and has deeply carved symmetrical zoommorphic decoration. At each end is an open mouthed beast with a snout and eye indentation either side facing outwards. Between the heads is a girth ridge flanked by a row of sub-circular indentations (six on each side). The frame of the loop is D-shaped i…
Created on: Wednesday 15th August 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-ADA2B1

Record ID: DOR-ADA2B1
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A silver siliqua of Valens (AD 364 - 378) dating to AD 367 - 375 (Reece period 19). VRBS ROMA (Roma seated on a throne, holding a spear and Victory on a globe) reverse. Mint of Trier. Mint mark: //TRPS. Reference: RIC Volume IX, Trier 27b Date: Roman Diameter: 16.3 mm Thickness: 1.15 mm Weight: 1.43 g Die axis: 12
Created on: Wednesday 8th August 2018
Last updated: Wednesday 6th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AD9846

Record ID: DOR-AD9846
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Published Find published
An Early-Medieval silver sceat of Secondary Phase Series E (SEDE; type 89) divided by saltires with central saltire / coiled serpent with radiate lines down back protecting cross and biting pellet), c.AD 715-730. The SEDE type is probably an English variety. Ref: Abramson (2006:109) E700. Date: Early Medieval Diameter: 11.1 mm Thickness: 1.64 mm Weight: 1.17 g
Created on: Wednesday 8th August 2018
Last updated: Monday 25th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AD8D68

Record ID: DOR-AD8D68
Object type: COIN
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver quarter stater of the British Iron Age. South West uninscribed (Durotrigian) geometric type. dating to c. 50-10 BC. A geometric design including a zig-zag and circular elements. References: BMC cf. No. 2748 - 79; Rudd ABC 2211 Date: Late Iron Age Diameter: 13.9 mm Thickness: 1.7 mm Weight: 0.63 g
Created on: Wednesday 8th August 2018
Last updated: Thursday 7th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AD7774

Record ID: DOR-AD7774
Object type: AWL
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Published Find published
A complete Late Bronze Age (c.1150-800 BC) copper alloy probable awl, with a square cross-section tapering into a flat rectangular sectioned tang at one end, and an oval cross section tapering to a rounded point at the other. Date: Late Bronze Age Dimensions: 60.8mm x 3.9mm x 3.9mm Weight: 3.55g Similar to database record HAMP-10928A
Created on: Wednesday 8th August 2018
Last updated: Wednesday 27th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AB7E5C

Record ID: DOR-AB7E5C
Object type: BRACELET
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of copper alloy sectional bracelet dating to c. 400 BC - AD 43. An almost complete short section, probably from a two-part bracelet. The piece is parallel sided and curving, C-shaped in cross section (convex on the upper face). The ends are straight with a rectangular pierced lug projecting on the vertical axis from the centre of one edge and an oval cross-sectioned pointed lug projecting from the centre of the opposite end. The lug has a large circular aperture and would have attached to an axis point on the missing part of the bracelet in order to form a hinged opening. Th…
Created on: Wednesday 8th August 2018
Last updated: Monday 26th November 2018
Spatial data recorded.


  • Thumbnail image of DOR-AB7422

Record ID: DOR-AB7422
Object type: TOGGLE
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy type toggle of late Iron Age to Roman date, c.100 BC - AD 250. The head of the object is formed of two pierced loops in a figure of eight. An integral shank extends down from the reverse of the head and bends at 90 degrees before splitting in to two arms, forming a triangular loop. The orientation of the shank results in the head and arms being on different plains.The metal has a shiny dark green patina. The head is 20.6mm long and 7.5mm in diameter. Date: Probably Late Iron Age to Roman Dimensions: 22.1 mm x 21.1 mm x 3.9 mm Weight: 7.78 g The shank and loop …
Created on: Wednesday 8th August 2018
Last updated: Wednesday 13th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AB6294

Record ID: DOR-AB6294
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy object, possibly a furniture fitting of a Roman date. A circular plate with a central recess around a central flat-topped boss and a central projection at the rear with iron corrosion (probably an attachment spike). The outer edge of the front of the plate is decorated with a series of concentric ridges. Reference: Crummy N, 1983 Colchester Archaeological Report 2, pg. 166, fig.203, no.4640. Date: Roman - c. AD 43 - 410 Diameter: 32.0 mm Thickness: 12.4 mm Weight: 12.69 g
Created on: Wednesday 8th August 2018
Last updated: Wednesday 13th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AB1642

Record ID: DOR-AB1642
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Published Find published
An incomplete copper alloy zoomorphic plate brooch of Mackreth, Type 4.a2 dating to AD 150 - 200. The brooch is in the shape of a bird, probably a duck. The body and head project from a flat, oval base which concealed the pin and catchplate. The pin is missing but the lug which is the loop for the pin is extant with the remains of the pin present in the hole. Part of the catchplate is present but the pin curl is missing. The underside is undecorated. On the top of the brooch, four inlays with remains of red enamel in the inner two and green in the outer two represent the back and folde…
Created on: Wednesday 8th August 2018
Last updated: Wednesday 13th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AB0176

Record ID: DOR-AB0176
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy plate brooch of the Hattatt's 'Tutulus' type dating to the second century AD. The brooch is umbonate with six rounded recessed lugs spaced evenly around its outside edge. It has a large central field within a circular incised recess just inside the lugs, it rises and peaks to a central conical boss which flattens off to a plateau with a slight recess for enamel. There are traces of red enamel inside each lug recess and the central boss. One lug contains red enamel set around a circular pieces of white enamel, probably a section of glass rod. On the reverse at…
Created on: Wednesday 8th August 2018
Last updated: Wednesday 13th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AAF414

Record ID: DOR-AAF414
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy enamelled symmetrical plate brooch dating to c.100 AD - c.200 AD. The brooch is lozenge shaped. The central lozenge section has one large central cell of the same shape, filled with 16 small blocks of millefiori. Such blocks were formed by cutting slices from a composite glass rod, formed by arranging coloured rods of glass in a pattern, heating them enough to fuse and then stretching them into long thin, composite rods. The pattern seen on this brooch comprises alternating lozenge-shaped blocks of two patterns: one is a blue flower-like design, with a red cent…
Created on: Wednesday 8th August 2018
Last updated: Wednesday 13th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-AAD4CF

Record ID: DOR-AAD4CF
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy enamelled plate brooch dating to c. AD 100 - c.AD 200. The plate only remains. The plate is cruciform, cross being comprised of two vertically opposing oval arms and two horizontally opposed shorter triangular arms (pointing inwards) with circular knops at the ends. The oval arms are recessed and contain traces of orange enamel. The triangles are recessed and contain aqua blue enamel and the circular projections are also recessed and contain orange enamel. On the reverse of the two longer oval arms, at one end is a pierced lug and the stub of a second lug. T…
Created on: Wednesday 8th August 2018
Last updated: Wednesday 13th March 2019
Spatial data recorded.


  • Thumbnail image of DOR-196E54

Record ID: DOR-196E54
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Object 1: An unidentified lump of copper alloyDate:Dimensions: 11.9mm x 4.6mm.Weight: 1.50g. Object 2: An unidentified lump of copper alloy. Date: Dimensions: 8mm x 5.62mm. Weight: 1.24g.
Created on: Wednesday 1st August 2018
Last updated: Thursday 31st January 2019
Spatial data recorded.


  • Thumbnail image of DOR-191194

Record ID: DOR-191194
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy strap slide dating to c.1150 to 1400. The slider consists of a single, trapezoidal loop with upwards curved upper edges. There are a pair of opposed internal triangular projections about a quarter of the way up the sides of the frame. The sides of the frame are rectangular in section apart from the longer upper edge which has a rounded top. Reference: Egan and Pritchard (1991: 234) illustrate a number of similar examples, including ref. 1265 which they assign to a late 12th to late 14th century date. They note that the type with internal projections are thought to be the…
Created on: Wednesday 1st August 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of DOR-18DABC

Record ID: DOR-18DABC
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of The House of Valentinian dating to AD 364-378 (Reece period 19). Reverse type GLORIA ROMANORVM depicting emperor with standard going right dragging captive. Date: Roman Diameter: 16.34 mm Thickness: 0.94 mm Weight: 0.78 g Die axis: 12
Created on: Wednesday 1st August 2018
Last updated: Saturday 10th November 2018
Spatial data recorded.


  • Thumbnail image of DOR-03D227

Record ID: DOR-03D227
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A 17th century trade token. Issued by Thomas Williams in Chard, Somerset in 1656. Reference: Boyne 1858, P. 393, No. 74 Date: Post Medieval Diameter: 15.68 mm Weight: 0.83 g Die axis: 6
Created on: Tuesday 31st July 2018
Last updated: Tuesday 31st July 2018
Spatial data recorded.


  • Thumbnail image of DOR-9D59EA

Record ID: DOR-9D59EA
Object type: FLAKE
Broad period: MESOLITHIC
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A secondary flint blade flake probably produced during blade manufacture. Sub-rectangular, it has a triangular cross-section.The flint is mid-grey and is now covered in a thin smooth layer of speckled blue-white recortification giving a low-gloss patina. Thick nodular cortex remains on around 70% of the dorsal face from the distal end down the central ridge of the flake with surrounding linear blade flake removal scars. The ventral face is concave and shows no apparent bulb of percussion indicating probable use of a soft hammer. Date: Mesolithic 10000 BC to 4000 BC.Dimensions: 47.4mm x…
Created on: Thursday 26th July 2018
Last updated: Thursday 9th August 2018
Spatial data recorded.


  • Thumbnail image of WAW-99E1A0

Record ID: WAW-99E1A0
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval coin: halfgroat of Henry VIII (1509-1547) minted in Canterbury, between 1544 and 1547. North No. 1852.
Created on: Thursday 26th July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of WAW-8D702B

Record ID: WAW-8D702B
Object type: JETTON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval jetton: Rose and orb jetton, appear to be most popular jettons of Hans Schultes I and Hans Krauwinckel II and probably date from 1490 and continues to 1585 (Mitchiner, 1988). This type of jetton are also seen into the 17th century, for example of Wolf Lauffer II which date to 1612 and 1651. Obverse: Illegible legend. Three Crowns, alternately with three lis, arranged centrifrugally around a central rose. Reverse: Illegible legend. Imperial orb surmounted by a cross patty, within a tressure with three main arches. Mitchiner, M. 1988 Jettons, Medalets and Tokens: The Medie…
Created on: Wednesday 25th July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of WAW-8D5217

Record ID: WAW-8D5217
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval coin: penny of Henry VIII (1509-1547) minted in London, between 1544 and 1547. North No. 1854-55.
Created on: Wednesday 25th July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of WAW-8D3752

Record ID: WAW-8D3752
Object type: COIN
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Medieval coin: halfpenny of Richard II (1377-1399) minted in London between 1377 and 1399. Type 1a. North Nos. 1331.
Created on: Wednesday 25th July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of WAW-8A9B02

Record ID: WAW-8A9B02
Object type: COIN
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Medieval coin: penny of Henry III (1216-1272) minted in Bristol by Jacob between 1248 and 1250 AD. Class 3b: North 987.
Created on: Wednesday 25th July 2018
Last updated: Wednesday 25th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-881705

Record ID: DOR-881705
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of the House of Constantine dating to AD 330-335 (Reece period 17). VRBS ROMA obverse with wolf and twins with stars above reverse. The coin is worn. Mint of Trier. Reference: LRBC Part I, no.70 Mint mark: //TRP*Date: RomanDie axis: 6 Diameter: 17.56mm, thickness: 1.79mm, weight: 2.66g
Created on: Wednesday 25th July 2018
Last updated: Tuesday 14th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-876D55

Record ID: DOR-876D55
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a cast copper-alloy vessel, probably a skillet or cauldron, of Medieval to Post-Medieval date, circa 1200-1700. The rim is beaded internally and there are file markings on the internal surface. The shaping of the lower section of the fragment suggests that the vessel may have had an everted rim. The object is pitted, with a blackened surface suggesting sooting. The vessel fragment is 60.91mm in length, 37.67mm in width and 4.36mm in thickness. It weighs 46.91g.
Created on: Wednesday 25th July 2018
Last updated: Tuesday 14th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-871A89

Record ID: DOR-871A89
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy vessel fragment from the Medieval to Post-Medieval periods, circa 1250-1750, possibly from a cauldron or skillet. The rim is beaded internally and there are file markings on the internal surface. The rim has a straight wall on the outer surface which is pitted. Both surfaces are blackened suggesting sooting. The fragment is 29.07mm in length, 38.05mm in width and 4.36mm in thickness. It weighs 15.41g.
Created on: Wednesday 25th July 2018
Last updated: Tuesday 14th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-86B26E

Record ID: DOR-86B26E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Post Medieval cast copper alloy double-looped oval buckle frame, missing the pin and one of the loops. There is moulded decoration on the surviving outer edge of the frame and at either end of the strap bar. The buckle frame has bevelled inner and outer edges and a rear surface is flat, making the frame sub-triangular in section. On the outer edge of the frame there evidence of a worn moulded rosette with a raised central pellet, which projects into the centre of the buckle. There is no evidence of a pin rest. The strap bar is narrowed and bevelled on either side and has …
Created on: Wednesday 25th July 2018
Last updated: Tuesday 14th August 2018
Spatial data recorded.


  • Thumbnail image of SOM-6FEFAB

Record ID: SOM-6FEFAB
Object type: STRAP END
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval copper alloy strap end dating to AD 1275 to 1450. The strap end consists of two pieces of copper alloy sheet forming the front and back plates. The sheets are trapezoidal in shape and riveted togheter with two rivets in situ, one near each end. The strap end is triangular in long section with a gap between the plates at the attachment end to take the strap, the gap is now filled with soil. The strap end has a worn and partly broken edge at the attachment end and with very worn lateral edges with one lower corner missing. The terminal was formed of two convex curv…
Created on: Tuesday 24th July 2018
Last updated: Wednesday 22nd August 2018
Spatial data recorded.


  • Thumbnail image of DOR-5B973F

Record ID: DOR-5B973F
Object type: MINIATURE OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A lead possible toy or miniature horseshoe. The horse shoe has a U-shaped aperture, traces of a calkin at the end of one arm and traces of indentations to indicate nail holes around it on one face. Date: Post Medieval - c 1500 - 1700 Dimensions: 22.26 mm x 18.09 mm x 2.69 mm Weight: 4.37 g The miniature shoe is similar in style to types generally dated to c. 1250 - 1600
Created on: Monday 23rd July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5B8D72

Record ID: DOR-5B8D72
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of copper alloy sheet metal, probably part of a strip bow brooch. A short section of tapering sheet metal, broken at both ends. It is angled at the widest end. The lower section is decorated with an incised line along either of the long sides. Date: Roman- c. 25 - 70 Dimensions: 15.78 mm x 8.03 mm x 0.60 mm Weight: 0.45 g
Created on: Monday 23rd July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5B81BB

Record ID: DOR-5B81BB
Object type: FINGER RING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy finger ring with an empty oval setting. The ring is "stirrup-shaped" and has bevelled inner edges to the band. The band is broken at the rear and has an oval cross section. The bezel is thickened from the band with angled sides (forming a truncated triangle), There is an oval recess at the apex which has two conical depressions inside it, possibly for two gems or pieces of glass to have been set into it. Date: Medieval - c 1150-1450 Dimensions: 21.55 mm x 21.79 mm x 5.77 mm Weight: 2.89 g A similar ring is recorded in Egan G and Pritchard F, 1991, Dress Ac…
Created on: Monday 23rd July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5B7AE7

Record ID: DOR-5B7AE7
Object type: STRAP END
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy sheet metal strap end. Part of the rectangular folded sheet-metal plate only. It is possibly missing the whole of one long side. The front half of the plate is rectangular with a single circular attachment hole at one corner. The rear half of the plate has been cut diagonally into a point with a circular attachment hole at the apex. The two attachment holes are set one directly behind the other. The transverse fold in the middle plate is U-shaped. The plate is undecorated Date:Medieval - c. 1200- 1400 Dimensions: 17.95 mm x 9.70 mm x 0.39 mm Weight: 0.64 g
Created on: Monday 23rd July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5B7519

Record ID: DOR-5B7519
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy sheet metal buckle plate. Half of the plate only remaining. A rectangular sheet metal plate broken at both ends, there are two corroded, sub-circular iron rivets, one at either end of the plate and both set off-centre. The front of the plate is decorated with incised lines and dashes. The detail of the design is unclear and obscured by corrosion from the iron rivets in places. The rear of the plate is undedcorated. Date: Medieval - c. 1200- 1400 Dimensions: 29.30 mm x 15.01 mm x 0.64 mm Weight: 1.44 g
Created on: Monday 23rd July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5B39D3

Record ID: DOR-5B39D3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy double buckle pin. The pin has a rectangular cross section. It is looped at one end for attachment to the bar of a buckle and tapers to a point at the other end. Date:Medieval to Post Medieval - c. 1300- 1700 Dimensions: 25.11 mm x 4.61 mm x 1.92 mm Weight: 1.29 g
Created on: Monday 23rd July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5B2497

Record ID: DOR-5B2497
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy double looped buckle frame. One loop only remaining. The pin is missing. The frame is a shallow D-shape in cross section. The loop is D-shaped. At the outer edge is a flattened knop with moulded shell-like decoration. The bar is narrowed from the frame and D-shaped in cross section with a small knop at either end. Date: Post Medieval - c. 1550 - 1650 Dimensions: 23.60 mm x 16.68mm x 1.70 mm Weight: 1.58 g A similar buckle is recorded in Whitehead 1996, p. 64, No. 392
Created on: Monday 23rd July 2018
Last updated: Thursday 26th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5A9123

Record ID: DOR-5A9123
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy strap-slide. A rectangular loop with a rectangular-section frame. At one edge is an integral external rivet with a sheet metal rove attached and the end splayed. The rove is rectangular and set lozenge fashion. Date: Medieval - c. 1250 - 1400. Dimensions: 13.93 mm x 14.82mm x 3.67 mm. Weight: 0.1.44 g. A similar strap-slide is recorded in Egan and Pritchard 1991, 230 - 232, no. 1245.
Created on: Monday 23rd July 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of DOR-5A73FD

Record ID: DOR-5A73FD
Object type: STRAP END
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy "shield-shaped strap end with a separate bar mount at the attachment end. The plate is rounded with a single, central hole at the lower edge and a notch on either side. The bar mount has a C-shaped cross section and is attached with an single, central rivet that has a sheet metal rove at the rear. The rove is rectangular and incomplete. Date: Medieval - c. 1350 - 1400 Dimensions: 15.86 mm x 12.66 mm x 3.33 mm Weight: 0.93 g A similar strap end is recorded in Egan & Pritchard, 1991, p. 156 - 157, No. 735 and others are recorded on the database e.g. ESS-0B9A86 & SO…
Created on: Monday 23rd July 2018
Last updated: Wednesday 25th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-5A0BC8

Record ID: DOR-5A0BC8
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy horse harness pendant. The plate is trapezoidal in shape and has a circular hole pierced through it towards the lower edge. There are traces of possible decoration on one face, but the surface is too corroded to be certain of what this comprises. At the centre of the upper edge is a suspension loop with a small circular hole, two of the corners of the plate have been bent inwards. Date: Medieval - c. 1200 - 1400 Dimensions: 42.25 mm x 29.27 mm x 0.75 mm Weight: 5.44 g
Created on: Monday 23rd July 2018
Last updated: Wednesday 25th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-1BBA5E

Record ID: DOR-1BBA5E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy double looped buckle frame. The frame has two oval loops with a flat back and beveled inner edges. The centre bar is narrowed from the frame and has a triangular section. The pin is missing, but there are traces of iron corrosion product on the centre bar, possibly from an iron pin. Date: Late Medieval to Early Post Medieval, c. 1350 - 1600 Dimensions: 23.73 mm x 18.12 mm x 3.52 mm Weight: 3.86 g Finds from London indicate broad date range, see examples published in Egan G and Pritchard F, 1993, Dress Accessories p 82-6, cf no.331 and 349 and Egan, G, 2005 Materia…
Created on: Friday 20th July 2018
Last updated: Wednesday 25th July 2018
Spatial data recorded.


  • Thumbnail image of DOR-1B1B76

Record ID: DOR-1B1B76
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy hooked strap fitting. The tapering plate is slightly convex at the front and slightly concave at the rear. At the top the corners are rounded and the centre is slightly indented creating a bifid terminal. The sides of the plate taper inwards to a transverse rectangular expansion. From this the plate constricts into tapering backward hook with a squared end. The hook is a shallow 'D'-shaped in cross-section, flat at the rear. Along the longitudinal centre-line of the plate are two rivet holes, one filled with iron corrosion. Date: Post Medieval - c. 1500 - 170…
Created on: Friday 20th July 2018
Last updated: Wednesday 25th July 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 12,163
Search server index: asgard

You are viewing records: 601 - 700.

Search statistics

  • Total quantity: 16,778
  • Mean quantity: 1.390
  • Maximum: 662

Filter your search

601 - 700 of 12,163 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.