Back to simple search | Back to advanced search

    You searched for:

    • Complete: Complete
    • County: Dorset
    • Object type: VESSEL
    • Sort: workflow
    • Primary material: Copper alloy
    • Show this many records per page: 100

  • Thumbnail image of WAW-4B7FA1

Record ID: WAW-4B7FA1
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The object is a vessel lid. It is sub circular in plan, with a sub-semi circular platform protruding from one edge. There are at least 5 very small angular protrusions which are probably decorative. The upper surface is slightly convex, the under surface is concave. Only the upper surface is decorated. The decoration is in the form of ‘ring and dots’ forming a border around the edge, and an inner circle which has trefoils of ‘ring and dot’ designs in the centre. There are also two fine concentric grooves between the inner and outer ‘ring and dot’ borders. The semi-circular …
Created on: Friday 11th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-E9ED10
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy pot leg. A small tapering pot leg from a tripod vessel. It is flat at the back, convex at the front. It has a collar at one end with a tapering leg below
Created on: Thursday 15th April 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


  • Image not taken

Record ID: SOMDOR-EA01F6
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy pot leg. It is a small pot leg from a tripod vessel. It is flat at the back, convex at the front. There is a collar at one end with a leg below. The foot is slightly tri-lobed.
Created on: Thursday 15th April 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


  • Image not taken

Record ID: SOMDOR-EA1671
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy pot leg. It is a small pot leg from a tripod vessel. It is flat at the back, convex at the front. There is a collar at one end with a leg below. The foot is slightly tri-lobed.
Created on: Thursday 15th April 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


  • Image not taken

Record ID: SOMDOR-8F18B1
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy object. Probably a pot leg. It is arrow shaped protruding from a slightly curved lump of copper alloy. Possibly one of tripod legs from a cooking pot. Very pitted possibly through cleaning.
Created on: Wednesday 5th May 2004
Last updated: Thursday 24th February 2011
No spatial data available.


  • Image not taken

Record ID: SOMDOR-B97380
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Cast, copper alloy leg from a cauldron.Pinted, triangular sectioned foot, above which is a transverse collar. The triangular sectionedl eg continues beyond to where it has broken away from the cauldron body. It retains a small area of the internal surface of the cauldron, which is smooth.
Created on: Tuesday 12th October 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-A8E6C5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy pot leg. Incomplete vessel leg with a trapezoidal section. Decorated with a single longitudinal ridge on the outer face. A leg from a cauldron or skillet.
Created on: Wednesday 29th September 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-A8FE48
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Small copper alloy pot leg from a skillet. Baluster shaped leg with a convex front and flat back
Created on: Wednesday 29th September 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-BD75C4
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy vessel foot or pot leg. Incomplete. Large solid cast foot from a tripod vessel. It has a flat base. There is a moulded central rib on the upper surface. It is a tapering form with a rounded end.
Created on: Wednesday 7th January 2004
Last updated: Wednesday 30th September 2015
Spatial data recorded. This findspot is known as 'Puddletown', grid reference and parish protected.


  • Thumbnail image of SOMDOR-3C7384

Record ID: SOMDOR-3C7384
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy wide, everted rim from a cooking pot. Fragment only. There is a raised rim around the outer edge of the vessel rim on the inner surface. There are traces of sooting on the outside
Created on: Wednesday 7th April 2004
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cerne Abbas', grid reference and parish protected.


  • Image not taken

Record ID: DOR-84C4F5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Part of a leg from a cast copper alloy tripod cooking vessel of medieval or post-medieval date. The leg would be from a cauldron or similar vessel. The upper part has a D-shaped cross-section. The back is flat and undecorated. The foot projects forwards and widens out from the upper part. It is damaged at one corner but is broadly paw-shaped having a central rib and and a rounded corner. Dimensions: 34.10 mm x 19.07 mm x 4.61 mm Weight: 5.47 g
Created on: Monday 14th May 2007
Last updated: Tuesday 30th August 2016
Spatial data recorded.


  • Thumbnail image of DOR-858F35

Record ID: DOR-858F35
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Cast, copper alloy leg probably from a copper alloy vessel. It is sub-circular with a paw-like lobed shape at the front (five lobes, one large in the centre with two smaller each side). At the back is a wide, vertical groove. the underside is uneven. The top surface is higher at one side than the other, probably to allow for attachment to a vessel. Date: Post-medieval Dimensions: 24.15 mm x 36.16 mm x 24.87 mm Weight: 115.97 g
Created on: Saturday 12th July 2008
Last updated: Thursday 24th February 2011
No spatial data available.


  • Image not taken

Record ID: DOR-7A4727
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Three fragments of cast copper alloy vessels. Two are rim fragments (one pointed rim, one rounded rim) and the third is a small fragment of vessel body. All are scored and sooted in the exterior surfaces. They are probably fragments of late medieval to post medieval cauldrons.
Created on: Wednesday 12th March 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Frampton', grid reference and parish protected.


  • Thumbnail image of DOR-DC6575

Record ID: DOR-DC6575
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper alloy vessel. A piece of cauldron or skillet rim. The rim is pointed with a slight internal bead. The external surface is rough cast. Date: Late medieval to Post-medieval - 15th to 17th Century Dimensions:48.95 mm x 41.40 mm x 23.52 mm Weight: 18.84 g
Created on: Tuesday 22nd April 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of DOR-DC8742

Record ID: DOR-DC8742
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper alloy vessel. Probably a piece of a bowl or lid. The rim is flat topped and has an internal bead. The external and internal surfaces are rough cast. Date: Late medieval to Post-medieval - 15th to 17th Century Dimensions: 30.02 mm x 67.35 mm x 7.35 mm Weight: 52 g
Created on: Tuesday 22nd April 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: DOR-DB8962
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy vessel leg. An angular, ridged leg from a cauldron or large skillet. THe shaft of the leg is D shaped with the curve on the back and a central raised ridge on the front face.The foot is triangular in profile and projects forward fron the leg. The central ridge continues on to the foot. The base of the foot is uneven. There is a break at the top of the leg. The object is poorly cast with a number of voids visible at the breaks. Date: Post-medieval - 16th to 17th Century Dimensions:48.95 mm x 41.40 mm x 23.52 mm Weight: 106 g
Created on: Tuesday 22nd April 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOM-F02A52

Record ID: SOM-F02A52
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy vessel of probable post-medieval date. It is difficult to be certain if this is a rim or a base fragment. It is possibly a piece of a base from a pedestal footed vessel. It has a curved outer edge with a groove and ridge around the circumference. The vessel is thinned considerably from the edge.
Created on: Monday 5th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Corfe Castle', grid reference and parish protected.


  • Thumbnail image of DOR-2DCB21

Record ID: DOR-2DCB21
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper alloy jug handle. A curvilinear/leaf-shaped lower terminal escutcheon with relief decoration of two human feet. There are traces of solder at the back where the escutcheon would have attached to the body of the jug and the surface is keyed by diagonal scoring to improve adherance. The escutcheon is slightly curved to accomodate the curve of the jug to which it was attached. Date: Roman - possibly 1st to 2nd century Dimensions: 49.33 mm x 33.59 mm x 5.67 mm Weight: 21.62 g
Created on: Thursday 8th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Castleton', grid reference and parish protected.


  • Thumbnail image of SOM-30CF62

Record ID: SOM-30CF62
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A leg from a cast copper alloy cooking vessel such as a cauldron or skillet, of medieval or post-medieval date. The leg measures 46.1mm by 22.1mm by 11.5mm and weighs 52g. The cross-section is D-shaped, with a flat undecorated back and a curving front. The D-shaped base is slightly rounded and at a near right-angle to the rest of the leg. From the base the leg narrows gradually but widens again briefly after about 20mm. Alove and below the wider section there are five linear vertical grooves which are equally spaced around the curving front. This leg would have been one of three on the…
Created on: Tuesday 20th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Over Compton', grid reference and parish protected.


  • Thumbnail image of SOMDOR-16B0C2

Record ID: SOMDOR-16B0C2
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a medieval or post-medieval metal cooking vessel, probably a post-medieval skillet judging by its dimensions and hoof-like form. The leg measures 53.11mm in length, 31.06mm in width and 18.10mm in thickness. It weighs 111.47g. The cross-section is D-shaped. From the base the leg narrows gradually to the point of the break, although in the centre of the surviving fragment the leg thickens briefly. There are also three slight vertical ridges which are equally spaced over the curving front. This leg would have been one of three on the complete vessel.
Created on: Thursday 15th June 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Pamphill', grid reference and parish protected.


  • Thumbnail image of SOMDOR-FDA123

Record ID: SOMDOR-FDA123
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy foot from a cooking vessel of medieval or post-medieval date. The foot measures 48.5mm by 27.5mm by 19.8mm and weighs 102.6g. It has a D-shaped base and a flat front with a central vertical ridge which is set at 45 degrees. The foot would have been one of three on a cauldron, skillet or posnet.
Created on: Thursday 7th September 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kington Magna', grid reference and parish protected.


  • Thumbnail image of SOMDOR-FDC635

Record ID: SOMDOR-FDC635
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy object which is probably the terminal from the drop handle from a vessel of later medieval or early post-medieval date. The zoomorphic terminal measures 23.4mm by 17mm by 14.8mm and weighs 24.4g. Both ends are flat with a off-centre hole which is much narrower at the mouth end. The terminal appears to be moulded to resemble a dog, with diagonally orientated leaf-shaped ears, sunken eyes, slightly narrowed snout, upwards projecting nose and open mouth. A similar zoomorphic terminal collar is illustrated in Egan (1998, p. 175, no. 487). Egan states that a comparable h…
Created on: Thursday 7th September 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kington Magna', grid reference and parish protected.


  • Thumbnail image of SOMDOR-0FE673

Record ID: SOMDOR-0FE673
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The broken terminal end of a Roman copper alloy patera (skillet) handle. The sides of the handle taper towards the break with a double grooved linear border on either side. The terminal of the handle is circular with a beaded border running around its circumference, the centre is pierced for suspension and also has a beaded rim around its edge. A good parallel for this handle is provided by a complete vessel from Gloucestershire recorded on the database as GLO-048BB1. The handle would originally have been cast as one with the vessel. However, there is evidence for re-use. the broken e…
Created on: Monday 2nd October 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-FEE5F8
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Cast, copper alloy pot leg. Incomplete. Cast with a central, logitudinal ridge at the front. The back is flat. The base of the foot is worn and irregular. The Top is broken. The surface retains traces of a black coating, possibly sooting. The foot from a cauldron or large skillet. Medieval to post medieval.
Created on: Thursday 9th March 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of WILT-164EF4

Record ID: WILT-164EF4
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Late medieval/ early post medieval copper alloy foot from probably a large and substantial cauldron. On the underside it is D-shaped , the long straight side being beneath the toes. The toes slope upwards and backwards so the foot is triangular in section, being thickest at the (ancient) break. there is a central rib which ends just below the break. The toes downturn very sharply. Measures 52mm wide, 39.5mm long and 26.5mm thick. Weighs 139.78g.
Created on: Friday 10th March 2006
Last updated: Tuesday 27th September 2016
Spatial data recorded.


  • Thumbnail image of SOMDOR-AA4F34

Record ID: SOMDOR-AA4F34
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A very worn or miscast copper alloy leg from a cauldon, skillet or posnet of medieval or post medieval date. The surfaces of the object are very uneven although the front appears to have a moulded vertical central ridge. The leg would have been one of the three required to support the vessel, although if this example was indeed miscast it would never have been used. Dimensions: 43.55mm by 41.19mm by 18.85mm Weight: 103.2g
Created on: Friday 17th March 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Compton Abbas', grid reference and parish protected.


  • Thumbnail image of SOMDOR-AA8641

Record ID: SOMDOR-AA8641
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A small cast copper alloy leg from a small cauldron, skillet or posnet of medieval or post medieval date. The base of the leg is flat and D-shaped and the leg is steeply angled. The leg would have been one of three required to support the vessel. Dimensions: 34.66mm by 24.71mm by 13.72mm Weight: 42.28g
Created on: Friday 17th March 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Compton Abbas', grid reference and parish protected.


  • Image not taken

Record ID: SOMDOR-705D51
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment of cast, copper alloy vessel. Fragment from the body just below a flaring rim. Some external sooting. Probably from a cauldron.
Created on: Saturday 19th February 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-706CE3
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Very small fragment of cast, copper alloy vessel. Fragment from the plain rim. Probably from a cauldron, ewer or skillet
Created on: Saturday 19th February 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: SOMDOR-709FB7
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
1 fragment of a cast copper alloy vessel. Thin walled vessel. The rim is pointed with an internal overhang. Below it on the internal surface of the vessel is an incised girth line. The internal surface is smooth and blackened (?laquer). the external surface is pitted and sooted. Probably from a cauldron.
Created on: Saturday 19th February 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SOMDOR-9AE3A5

Record ID: SOMDOR-9AE3A5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy cauldron leg. D sectioned leg which flares towards the base and has a thick, rounded collar near the top. The back is flat and undecorated and the fornt is decorated with five longitudinal cast ridges (the same alignment above and below the collar). The collar is undecorated. The underside of the foot is worn and blackened. Originally soldered to a cauldron or skillett. Date: Post-medieval 16th to 17th century
Created on: Monday 23rd August 2004
Last updated: Thursday 6th September 2012
Spatial data recorded.


  • Thumbnail image of SOMDOR-1DA597

Record ID: SOMDOR-1DA597
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Part of a leg from a cast copper alloy cooking vessel of medieval or post-medieval date. The leg measures 37.2mm in length, 33mm in width and 16.7mm in thickness. It weighs 71g. The cross-section is D-shaped, with a flat undecorated back and a curving front with five vertical ribs. The D-shaped base is fairly flat and is at a sixty degree angle to the rest of the leg. From the base the leg starts to narrow but widens again after about 25mm. At the top of this wider section the break has occurred. The leg would have been one of three on the complete vessel. Its dimensions and hoof-like …
Created on: Thursday 1st February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of SOMDOR-1DC364

Record ID: SOMDOR-1DC364
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Part of a leg from a cast copper alloy cooking vessel of medieval or post-medieval date. The leg measures 41.6mm in length, 27.6mm in width and 14mm in thickness. It weighs 58.3g. The cross-section is D-shaped, with a flat undecorated back and a curving front with five slight vertical ribs. The D-shaped base is rounded. From the base the leg starts to narrow but widens again after about 26mm. Just above this wider section the break has occurred. The leg would have been one of three on the complete vessel. Its dimensions and hoof-like form suggest that it came from a post-medieval skillet.
Created on: Thursday 1st February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of SOMDOR-1DD442

Record ID: SOMDOR-1DD442
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A worn and incomplete leg from a cast copper alloy cooking vessel of medieval or post-medieval date. The leg measures 45.9mm in length, 31.8mm in width and 14.2mm in thickness. It weighs 73g. The cross-section is a long oval with slightly pointed ends. The back appears to have three slight facets (although one side is damaged) and the front appears to have a low and wide vertical rib in its centre. The break is concave. The leg would have been one of three on the complete vessel.
Created on: Thursday 1st February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of SOMDOR-5A6882

Record ID: SOMDOR-5A6882
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a posnet or skillet and dating from the 13th-17th century. The leg is thin and flat (sub-rectangular section) with a rounded foot. It is approximately 36mm long.
Created on: Friday 16th February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Toller Down', grid reference and parish protected.


  • Thumbnail image of SOMDOR-24E512

Record ID: SOMDOR-24E512
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The leg of a cast copper alloy cooking vessel, either a cauldron, a posnet or a skillet, of medieval or post medieval date. The leg measures 60.6mm by 35.8mm by 16.4mm and weighs 104g. It has a flat D-shaped cross-section with a flat front and trapezoidal facetted back. The front face has a central projecting vertical rib. The leg widens towards the flattish sub-pentagonal base. It would have been one of three on a complete vessel.
Created on: Monday 8th January 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Okeford Fitzpaine', grid reference and parish protected.


  • Thumbnail image of DOR-869351

Record ID: DOR-869351
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy vessel foot. A plain rectilinear L-shaped foot from a tripod vessel (skillet or cauldron). The casting is poor with inclusions and imperfections resulting in a large oval recess on the underside of the foot, where there is also sooting. Date: Post-medieval - 16th to 17th century Dimensions: 21.33 mm x 24.05 mm x 24.55 Weight: 32.00 g
Created on: Wednesday 29th October 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of DOR-86C6E5

Record ID: DOR-86C6E5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy vessel foot. A plain semi-circular foot from a tripod vessel (skillet or cauldron). The casting is poor with many inclusions and imperfections resulting several voids. There is also sooting over mich of the surface. Date: Post-medieval - 16th to 17th century Dimensions: 34.94 mm x 46.93 mm x 21.98 mm Weight: 92.04 g
Created on: Wednesday 29th October 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of DOR-836E91

Record ID: DOR-836E91
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy skillet leg. A long, D-sectioned leg. The convex front has cast decoration of a transverse ridge towards the top of the leg and three cast longitudinal ridges extending from the top to the base. DAte: Late Medieval to Post-medieval late 15th to 17th Dimensions: 58.4 mm x 29.01 x 16.2 mm Weight: 101.55 g
Created on: Thursday 22nd January 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of DOR-8396C5

Record ID: DOR-8396C5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy cauldron leg. A large triangular sectioned foot with a raised central rib on the front. Date: Late Medieval to Post-medieval late 15th to 17th Dimensions: 46.01 mm x 49.02 mm x 27.30 mm Weight: 174.01 g
Created on: Thursday 22nd January 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of DOR-BF5356

Record ID: DOR-BF5356
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment of rim from a copper alloy vessel. This is probably a rim from a cauldron or similar vessel. The rim is pointed with a bevelled interior face and flat exterior. The vessel wall is thinned from the rim. The interior surface appears smoothed whilst the exterior is rougher and covered in horzontal scratches. There are traces of sooting on the exterior. Late Medieval to post medieval. Possibly 15th to 18th century. Dimensions: 46.5 mm x 42.2 mm x 6.67 mm Weight: 52.35 g
Created on: Wednesday 22nd August 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of DOR-BF7A05

Record ID: DOR-BF7A05
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment from a copper alloy vessel. This is probably from a cauldron or similar vessel. The rim is incomplete, but is everted and thinned from the vessel body. The interior surface appears smoothed whilst the exterior is rougher and covered in horizontal scratches. There are traces of sooting on the exterior. Late Medieval to post medieval. Possibly 15th to 18th century. Dimensions: 44.02 mm x 53.36 mm x 3.83 mm Weight: 42.24 g
Created on: Wednesday 22nd August 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of DOR-BFC323

Record ID: DOR-BFC323
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Fragment from a copper alloy vessel. This is a large vessel leg probably from a cauldron. The fragment consists of the foot and part of the leg, which is has an irregular break at the top. The leg is tri-lobate in section with a rounded, prominent ridge running up the centre of the front of the leg. The back of the leg is flat. The foot projects forwards from the leg and has a triangular profile. The base of the foot apears mis-cast and is slightly hollowed and rough.The surface of the leg is quite pitted and bumpy. This also indicates mis-casting and poor finishing. Late medieval to …
Created on: Wednesday 22nd August 2007
Last updated: Thursday 28th March 2013
Spatial data recorded.


  • Thumbnail image of DOR-ADD7C4

Record ID: DOR-ADD7C4
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy vessel fragment. Part of a vessel wall and rim, probably from a large vessel such as a cauldron. The rim has a low internal bead. The exterior of the vessel is scored, probably as a result of the maunfacturing process. Date: Medieval to Post-medieval - c. 1100 - c.1650 Dimensions: 39.36 mm x 33.55 mm x 4.37 mm Weight: 13.42 g
Created on: Tuesday 16th February 2010
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of DOR-ADEF88

Record ID: DOR-ADEF88
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy vessel fragment. Part of a vessel wall and rim, probably from a large vessel such as a cauldron. The rim is plain and pointed. The exterior of the vessel is sooted. Date: Medieval to Post-medieval - c. 1100 - c.1650 Dimensions: 67.59 mm x 57.49 mm x 5.17 mm Weight: 62.24 g
Created on: Tuesday 16th February 2010
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of DOR-AE0346

Record ID: DOR-AE0346
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy vessel fragment. Part of a vessel wall and rim, probably from a large vessel such as a cauldron. The rim has a low internal bead. The exterior of the vessel is scored, probably as a result of the maunfacturing process and also sooted. Date: Medieval to Post-medieval - c. 1100 - c.1650 Dimensions: 97.47 mm x 38.58 mm x 5.19 mm Weight: 66.84 g
Created on: Tuesday 16th February 2010
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of DOR-A93421

Record ID: DOR-A93421
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy vessel leg from a cauldron or (more likely) a skillet. The leg is D sectioned and decorated with five parallel longitudinal ridges. The foot is rounded with a flattened and worn tip. At the top is a remnant of thin vessel wall with a smooth inner surface. Date: Post Medieval - c. 1500 - 1700 Diameter: 61.47 mm x 40.31 mm x 17.73 mm Weight: 119.52 g
Created on: Thursday 2nd August 2012
Last updated: Wednesday 16th March 2016
Spatial data recorded.


  • Image not taken

Record ID: DOR-C101D2
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy pot leg from a cooking vessel. The leg is D-shaped in cross-section with a flat front and convex back and a central raised rib running down the front. It has an old irregular break at the upper end. The leg flares forwards at the base to create the plain D-shaped foot. . The surfaces are sooted from use in a hearth. Date: Medieval to Post Medieval - c.1200-1650 AD. Dimensions: 52.46 mm x 59.49 mm x 28.20 mm Weight: 285 g Crudely made cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-1700 for serving and cooking.…
Created on: Friday 21st March 2014
Last updated: Thursday 27th March 2014
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of DOR-D60733

Record ID: DOR-D60733
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy vessel fragment. Part of a vessel wall and rim, probably from a large vessel such as a cauldron. The rim has a low internal bead. The exterior of the vessel is scored, probably as a result of the maunfacturing process and also sooted. Date: Medieval to Post-medieval - c. 1200 - c.1650 Dimensions: 26.10 mm x 22.17 mm x 4.24 mm Weight: 7.40 g
Created on: Saturday 22nd March 2014
Last updated: Thursday 27th March 2014
Spatial data recorded. This findspot is known as 'Spetisbury', grid reference and parish protected.


  • Thumbnail image of DOR-DCE8C5

Record ID: DOR-DCE8C5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy pot leg from a cooking vessel. The leg is D-shaped in cross-section with a flat front and convex back and a central raised rib running down the front. It has an old irregular break at the upper end. The leg flares forwards at the base to create the plain D-shaped foot. . The surfaces are sooted from use in a hearth. Date: Medieval to Post Medieval - c.1200-1650 AD. Dimensions: 59.68 mm x 56.22 mm x 45.55 mm Weight: Crudely made cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-1700 for serving and cooking. Butle…
Created on: Wednesday 26th February 2014
Last updated: Friday 28th February 2014
Spatial data recorded.


  • Thumbnail image of DOR-B405E2

Record ID: DOR-B405E2
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a metal cooking vessel such as a cauldron or skillet. It has a D-shaped cross section with the flat side at the back. The back has a slight longitudinal groove. The front of the leg is decorated with five parallel longitudinal ribs with the central one being slightl wider than the others. The foot is rounded and asymmetrical from wear. It would have been one of three on a complete vessel. Date: Medieval to Post Medieval - c. 1250 - 1700 Dimensions: 37.78 mm x 22.74 mm x 12.00 mm Weight: 45.67 mm
Created on: Tuesday 19th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'Marnhull', grid reference and parish protected.


  • Image not taken

Record ID: DOR-4F3A12
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a metal cooking vessel such as a cauldron or skillet. It has a broadly D-shaped cross section with the flat side at the front. The front of the leg is decorated with a centrallongitudinal rib.. The foot is broken. It would have been one of three on a complete vessel. The casting is poor with a couple of large voids at the back of the leg. Date: Medieval to Post Medieval - c. 1250 - 1700 Dimensions: 64.42 mm x 56.93 mm x 27.38 mm Weight: 198.11 mm
Created on: Tuesday 14th January 2014
Last updated: Tuesday 14th November 2017
Spatial data recorded.


  • Image not taken

Record ID: DOR-4F5FB4
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a metal cooking vessel such as a cauldron or skillet. It has a plano-convex cross section with the flat side at the front. The front of the leg is decorated with a central longitudinal rib.The foot has a flat underside which shows signs of wear and sooting. It would have been one of three on a complete vessel. Date: Medieval to Post Medieval - c. 1250 - 1700 Dimensions: 27.05 mm x 57.91 mm x 36.40 mm Weight: 154.04 mm
Created on: Tuesday 14th January 2014
Last updated: Tuesday 14th November 2017
Spatial data recorded.


  • Image not taken

Record ID: DOR-4F7867
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a metal cooking vessel such as a cauldron or skillet. It has a plano-convex cross section with the flat side at the front. The front of the leg is decorated with a central longitudinal rib.The foot has a flat underside which shows signs of wear and sooting. It would have been one of three on a complete vessel. Date: Medieval to Post Medieval - c. 1250 - 1700 Dimensions: 29.10 mm x 54.69 mm x 37.64 mm
Created on: Tuesday 14th January 2014
Last updated: Tuesday 14th November 2017
Spatial data recorded.


  • Image not taken

Record ID: DOR-4F86F5
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper alloy leg from a metal cooking vessel such as a cauldron or skillet. The base of the leg only remains. The front of the leg is decorated with a central longitudinal rib.The foot has a flat underside which shows signs of wear and sooting. It is broken in sevceral places and is cracked. It would have been one of three on a complete vessel. Date: Medieval to Post Medieval - c. 1250 - 1700 Dimensions: 29.40 mm x 64.53 mm x 15.92 mm Weight: 116.97 g
Created on: Tuesday 14th January 2014
Last updated: Tuesday 14th November 2017
Spatial data recorded.


  • Thumbnail image of SOM-E96EB1

Record ID: SOM-E96EB1
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy pot foot and part of the leg. The leg is D shaped in section with a flat back; it is broken off just above a transverse collar with an old break. The foot is also D shaped in section with five moulded 'toes' running down the front giving a scalloped lower edge and a flat back. The base of the foot is flat and would mean the leg sat at c.80 degrees to vertical. It is 39.5mm long, 22.4mm wide and 16.6mm thick; it weighs 41.74 grams. Cast copper alloy vessels were widely used from c.1200-1700 for serving and cooking. Butler et al (2009:4) sugges…
Created on: Thursday 25th November 2010
Last updated: Monday 6th December 2010
Spatial data recorded. This findspot is known as 'East Stoke', grid reference and parish protected.


  • Thumbnail image of SOM-FAFAB7

Record ID: SOM-FAFAB7
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Medieval or Post Medieval cast copper alloy pot leg, 1200-1700 AD. The leg is trapezoid in section with a wider front than back and a central raised rib running down the front. It has an old irregular break at the upper end. and has lost part of one side to a break or mis-casting; there are also several holes in the front from mis-casting The leg widens outwards at the base to create the plain trapezoid foot. The foot has an irregular front edge and may have been intended to have rounded front corners and an indented curved front with a central projection at the end of the rib bu…
Created on: Friday 26th November 2010
Last updated: Monday 6th December 2010
Spatial data recorded. This findspot is known as 'Piddlehinton', grid reference and parish protected.


  • Thumbnail image of WILT-98A173

Record ID: WILT-98A173
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Early Post-Medieval (c.1550-1700) sheet copper alloy handle attachment plate from a skimmer (or similar) with part of the original wooden core surviving. Part of the handle length is missing, as is the pierced skimming plate to which it would have attached. It survives in three pieces - the wooden core and attachment plate, of which a small piece is loose. It measures 100.22x40.44x(max)9.09mm and weighs 32.03g. The handle attachment itself comprises three separate pieces of sheet copper alloy. Two run the entire length of the surviving piece, one front and one back, wh…
Created on: Friday 23rd July 2010
Last updated: Friday 30th July 2010
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Image not taken

Record ID: DOR-181051
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy skillet or cauldron leg Date: Late medieval to post medieval Dimensions: 59.88 mm x 30.46 mm x 13.51 mm Weight: 57.0 g
Created on: Monday 5th July 2010
Last updated: Friday 9th December 2011
Spatial data recorded. This findspot is known as 'Chickerell', grid reference and parish protected.


  • Image not taken

Record ID: DOR-4438C0
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy pot leg from a cooking vessel. The leg is D-shaped in cross-section with a flat front and convex back and a central raised rib running down the front. It has an old irregular break at the upper end. The leg flares forwards at the base to create the plain D-shaped foot. There are several pits and cracks in the surface probably as a result of poor casting. Date: Medieval to Post Medieval - c.1200-1650 AD. Dimensions: 50.84 mm x 36.21 mm x 21.16 mm Weight: 106.20 g Cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-…
Created on: Wednesday 20th August 2014
Last updated: Tuesday 14th November 2017
Spatial data recorded. This findspot is known as 'Tarrant Launceston', grid reference and parish protected.


  • Thumbnail image of DOR-995E01

Record ID: DOR-995E01
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A large copper alloy vessel foot from a cauldron or skillet. The foot is tri-lobed at the front, giving a W shaped cross section. The lobes form ridges running up the body of the foot creating a paw-like shape. At the back the foot is convex and hs a retangular sectioned mid-rib running longitudinally. Date: Late Medieval to Post Medieval - 15th to 18th century Dimensions: 24.77 mm x 42.38 mm x 36.32 mm Weight: 109.18 g
Created on: Tuesday 28th June 2011
Last updated: Wednesday 8th February 2012
Spatial data recorded.


  • Thumbnail image of DOR-3D4E75

Record ID: DOR-3D4E75
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A possible vessel foot. Cast copper alloy. The object has an oval cross section, is waisted and has a rounded bi-lobed terminal. In overall shape it is reminiscent of a bone from mammal phalanges (finger or toe bone). The surface of the other terminal is irregular and rough suggesting this was attached to another object, possibly as a foot for a vessel or other object. Date: Possibly Roman, but it could be as late as Post Medieval Dimensions: 16.09 mm x 14.25 mm x 11.99 mm Weight: 8.21 g
Created on: Monday 18th July 2011
Last updated: Monday 18th July 2011
Spatial data recorded. This findspot is known as 'Near Puddletown', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-C3E0F1
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A large cast copper-alloy foot fragment from a cooking vessel of later medieval to post-medieval date, possibly a cauldron given its size. The object is trapezoidal in form and narrows from a width of 47.5mm at the point it has broken to 30.15mm at its terminal. It also thins, from 22.8mm thick at the point it has broken to c. 8.0mm at its terminal. A central rib runs up the front of the foot, this also thins with the foot. The break reveals that the leg had a trapezoidal cross-section with a triangular protrusion for the rib; the front is wider. This form of foot is comparable to the…
Created on: Thursday 28th June 2012
Last updated: Thursday 28th June 2012
Spatial data recorded.


  • Thumbnail image of SOM-C2EC85

Record ID: SOM-C2EC85
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy foot and part of the leg from a cooking vessel. It is roughly D-shaped in section, with flattened reverse and five ribs running down the convex front. The ribs are evenly spaced with one at each outer side. The rounded foot is separated from the leg by a prominent rounded transverse collar on the front. The ribs on the leg are less prominent. The leg is almost vertical when standing flat on the foot. At the top of the leg is a flat cur rather than a break. It measures 43.4mm in length, 30.8mm in width, 19.2mm in thickness and weighs 103.97g. A simil…
Created on: Thursday 28th June 2012
Last updated: Thursday 28th June 2012
Spatial data recorded. This findspot is known as 'Trent', grid reference and parish protected.


  • Thumbnail image of DOR-36ED24

Record ID: DOR-36ED24
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a cauldron or skillet. A cast copper alloy vessel leg from a cauldron or (more likely) a skillet. The leg is D sectioned and decorated with three parallel longitudinal ridges on the front. At the back the sides are beveled. The foot is rounded with a flattened and worn tip. At the top is a remnant of thin vessel wall with a smooth inner surface. Date: Late Medieval to Post Medieval - c. 1400 - 1700 Dimensions: 62.00 mm x 36.87 mm x 13.33 mm Weight: 157.84 g Cast copper alloy vessels were widely used from c.1200-1800 for serving and cooking. Butler an…
Created on: Wednesday 14th November 2012
Last updated: Tuesday 20th November 2012
Spatial data recorded. This findspot is known as 'Bradford Peverell', grid reference and parish protected.


  • Thumbnail image of DOR-37ADB8

Record ID: DOR-37ADB8
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a cauldron or skillet. A cast copper alloy vessel leg from a cauldron or (more likely) a skillet. The leg is D sectioned with a bulbous foot and a tapering leg/ There is a central longitudinal ridge. Date: Post Medieval - c. 1500 - 1800 Dimensions: 33.96 mm x 25.16 mm x 13.28 mm Weight: 33.35g Cast copper alloy vessels were widely used from c.1200-1800 for serving and cooking. Butler and Green (2003; 15) state 'there is evidence that (cast copper alloy) metal cooking vessels became increasingly common during the 13th and 14th centuries'. While certa…
Created on: Wednesday 14th November 2012
Last updated: Tuesday 20th November 2012
Spatial data recorded. This findspot is known as 'Bradford Peverell', grid reference and parish protected.


  • Image not taken

Record ID: DOR-6507C3
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of copper alloy cooking vessel. A piece from the rim of a cauldron or skillet. A pointed rim with a low internal bead. The exterior of the vessel is scored and sooted. Date: Medieval to Post Medieval - c. 1200 - 1650 Dimensions: 33.72 mm x 22.83 mm x 5.39 mm Weight: 13.50 g
Created on: Monday 26th January 2015
Last updated: Wednesday 4th March 2015
Spatial data recorded.


  • Image not taken

Record ID: DOR-653B42
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy pot leg from a cooking vessel. A large, poorly cast foot with a trapeziodal cross section. The front is decorated with three deeply moulded vertical ridges. It has an old irregular break at the upper end. The leg flares forwards at the base to create the foot. The surfaces are sooted from use in a hearth. Date: Medieval to Post Medieval - c.1200-1650 AD. Dimensions: 48.63 mm x 60.23 mm x 25.22 mm Weight:171 g Cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-1700 for serving and cooking. Butler et al. (2009:4)…
Created on: Monday 26th January 2015
Last updated: Wednesday 4th March 2015
Spatial data recorded.


  • Image not taken

Record ID: DOR-67342B
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper alloy probable vessel rim. Part of the rim of of a ewer, but it may also be the rim from a bell. A plain slightly everted rim with an narrow external bead at the base. Date: Medieval to Modern, c. 1250 - 1800 Dimensions: 61.04 mm x 17.43 mm x 2.77 mm Weight: 11.39 g
Created on: Monday 26th January 2015
Last updated: Wednesday 4th March 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-05B43B

Record ID: PUBLIC-05B43B
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval copper-alloy zoomorphic spout in the form of a dog's head dating to the period c. AD 1400 - 1500. The spout is from a ewer and exhibits a small section broken off at the base where is would have been attached to the body of the vessel and a small hole in the underside. The mouth of the spout protrudes from the open mouth of the dog's head. It has moulded eyes and stylised ears on either side of the head, the details of which are slightly worn. It has a green/brown patina and is slightly pitted in areas. Length: 73.80 mm, thickness: 20.92 mm, width: 23.68 mm, …
Created on: Wednesday 9th September 2015
Last updated: Tuesday 29th September 2015
Spatial data recorded. This findspot is known as 'Nether Compton', grid reference and parish protected.


  • Thumbnail image of PUBLIC-4AB701

Record ID: PUBLIC-4AB701
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A incomplete cast copper-alloy domestic vessel dating to the Medieval to Post-Medieval periods, (circa AD 1250-1750) A fragment of rim, probably from a cauldron or skillet. The rim internally is thickened and externally straight walled. The vessel is thin walled and the breaks are sharp indicating recent damage. The curvature of this vessel suggest a diameter of circa 200 mm which would of made this vessel very delicate and fragile in construction. Externally the finish is scored and pitted and there appears to be no sooting, internally the surface is very smooth and appears to have b…
Created on: Sunday 25th January 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of DOR-53F6CC

Record ID: DOR-53F6CC
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a cast copper alloy vessel dating to c.1200-1700. The object is the leg of a vessel or pot and has a D-shaped section with three cast vertical ridges and rounded foot. The back is hollowed. Crudely made cast copper alloy vessels were widely used throughout the Medieval and Post-Medieval periods for serving and cooking (Butler et al 2009). Date: Medieval to Post Medieval. Dimensions: 50.3mm x 31.9mm x 22.9mm. Weight: 100.58g.
Created on: Monday 4th December 2017
Last updated: Monday 8th January 2018
Spatial data recorded.


  • Thumbnail image of DOR-BBEA7E

Record ID: DOR-BBEA7E
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment from a cauldron leg. A fragment from the mid section of a large vessel leg with a distinct longitudinal mid-rib at the front. The back is concave and the leg has V-shaped cross section.There are breaks at both ends.The leg flares slightly. Date: Post Medieval - c. 1500 - 1700 Dimensions: 85.26 mm x 47.94 mm x 19.70 mm Weight: 157.55 g
Created on: Wednesday 11th February 2015
Last updated: Sunday 15th February 2015
Spatial data recorded.


  • Thumbnail image of LEIC-A0DBBD

Record ID: LEIC-A0DBBD
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Medieval to early Post medieval copper alloy vessel foot, 41mm in length, 22mm wide and 14mm thick with a weight of 56.73grams. The objcet is rectangular in form and semi-circular in cross section. It has a rounded collar just below the break and below this it is formed of three slight lobed areas above a flat base.
Created on: Wednesday 2nd November 2016
Last updated: Tuesday 8th August 2017
Spatial data recorded.


  • Thumbnail image of YORYM-05EDB3

Record ID: YORYM-05EDB3
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy Medieval to post Medieval vessel, dating to the period c.AD 1100-1700. The fragment comprises the foot, which is trapezoidal in cross section at the base. The cross section then narrows to become broadly lentoid when the foot extends upwards and narrows in width. A central longitudinal rib is present down the centre of the front.The upper terminal ends in a worn break. A green patina is on the surface, and sooting is present over much of the surface. Cast cooking vessels seem to have been in use from c.AD 1100 until c.1850, when they were superseded by …
Created on: Monday 7th November 2016
Last updated: Friday 11th November 2016
Spatial data recorded.


  • Thumbnail image of YORYM-068271

Record ID: YORYM-068271
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy Post-Medieval vessel, dating to the period c.AD 1500-1900. The fragment comprises the foot, which is broadly rectangular in plan and square in cross section. An integrally cast semi-circular flat surface is present at the upper terminal, with a worn break around its edge where it would have attached to the vessel. Its lower terminal slopes at an angle of 45 degrees to allow the leg to stand flat. A green-brown patina is on the surface.. A similar, but not identical example is dated to the 18th and 19th centuries (Butler, Green and Payne 2009, p.6), and …
Created on: Monday 7th November 2016
Last updated: Friday 11th November 2016
Spatial data recorded.


  • Thumbnail image of SOM-4A45C4

Record ID: SOM-4A45C4
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy zoomorphic spout of Medieval date, c. AD 1400 - 1500. The spout is from a copper alloy vessel, either a ewer or a laver. The spout is tubular with a zoomorphic head terminal in the form of a dogs head with gaping jaws that clasp a circular tube (7.3mm in diameter) that protrudes from its mouth by 3.19mm and is considerably worn by old breaks. The head iteself consists of a raised brow section which is square in plan which then curves downwards to form the dog's muzzle which takes the form of a small triangular knop with a curved apex. When viewed side on one…
Created on: Monday 17th October 2016
Last updated: Tuesday 25th October 2016
Spatial data recorded. This findspot is known as 'Burstock', grid reference and parish protected.


  • Thumbnail image of SOM-C481AA

Record ID: SOM-C481AA
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Post-Medieval pot leg, dating to the period c. AD 1500-1700. The leg is broadly triangular in cross section, the inner surface being flat and the outer surface formed of five conjoined convex ribs. The leg terminates downward in a flared, hoof-like foot, now very worn, separated from the leg by a raised collar. The object has a grey-green patina. The leg measures 50.3mm in length, 29.9.mm in width, and 15.2mm in thickness and weighs 93.59g. Butler et al (2009: 4) defines this type of pot leg as a type C, which was in use by the 16th century and almost universal du…
Created on: Thursday 9th February 2017
Last updated: Monday 13th February 2017
Spatial data recorded. This findspot is known as 'Castleton', grid reference and parish protected.


  • Thumbnail image of DEV-C40A15

Record ID: DEV-C40A15
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Medieval to Post Medieval copper alloy vessel foot, probably dating to c. AD 1200-1700. The foot is sub-trapezoidal in cross section, with the front, broad, face cast into three parallel longitudinal ribs and a central longitudinal ridge on the reverse. The underside is slightly concave and shows signs of sooting. Dimensions: length 43.0mm; width 52.3mm; thickness 15.3mm; weight 106.23g This is an example of Butler, Green and Payne's type A, which they suggest was in use throughout the medieval period and into the 17th century.
Created on: Wednesday 16th May 2018
Last updated: Wednesday 16th May 2018
Spatial data recorded.


  • Thumbnail image of DOR-BB7159

Record ID: DOR-BB7159
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy pot leg or foot from a cooking vessel. The leg is D-shaped in cross-section with a flat front and convex back and a central raised rib running down the front. It has an old irregular break at the upper end. The leg flares forwards at the base to create the foot. . The surfaces are sooted from use in a hearth. Date: Medieval to Post Medieval - c.1200-1650 AD. Dimensions: 37.44 mm x 48.03 mm x 20.84 mm Weight:115.49 g Cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-1700 for serving and cooking. Butler et al. (20…
Created on: Saturday 10th June 2017
Last updated: Wednesday 14th June 2017
Spatial data recorded.


  • Thumbnail image of SOM-58D397

Record ID: SOM-58D397
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval cast copper alloy pot foot with a small remnant of the pot attached, dating to c. AD 1500-1700. The foot is triangular in cross-section, tapering downwards. There are three longitudinal, convex raised ribs running down the front, the central rib protruding further than the others (thus forming the triangular cross-section), and extending further up as it joins the remnant of the pot body. The ribs come together towards the base of the foot. The back of the foot is flat. It has an old irregular break at the lower end. The leg widens and spreads outwards towards the pot …
Created on: Thursday 15th February 2018
Last updated: Thursday 15th March 2018
Spatial data recorded.


  • Thumbnail image of DOR-9261E3

Record ID: DOR-9261E3
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of copper alloy cooking vessel. A piece from the rim of a cauldron or skillet. A pointed rim with internal bead. The exterior of the vessel is scored and sooted.Date: Medieval to Post Medieval - c. 1200 - 1650Dimensions: 42.39 mm x 39.76 mm x 5.22 mmWeight: 34.80 g
Created on: Friday 2nd March 2018
Last updated: Friday 16th March 2018
Spatial data recorded. This findspot is known as 'Ashmore', grid reference and parish protected.


  • Thumbnail image of WILT-03A637

Record ID: WILT-03A637
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Post-Medieval copper alloy pot leg, of Butler, Green and Payne's type C, probably dating to c. AD 1500-1700. The leg is sub-rectangular in plan and plano-convex in cross-section, with a prominent transverse collar dividing the foot and leg, with the latter lost to an old break. The inside edge is flat and plain, whilst the foot has five prominent longitudinal ridges down its front. Dimensions: length 46.7mm; width 26.1mm; thickness 18.0mm; weight 68.01g. Butler, Green & Payne (2009) classify such legs as their type C, in use by the 16th century and ubiquitous by the 17th.
Created on: Monday 5th November 2018
Last updated: Wednesday 12th December 2018
Spatial data recorded.


  • Thumbnail image of DOR-AC03DE

Record ID: DOR-AC03DE
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy leg from a cauldron or skillet., broken across the leg. The underside of the foot is D-shaped in cross-section. The leg rises above and is D-shaped in cross-section at the (old) break. A prominent midrib runs along the centre of the leg to the front. The foot is crudely cast and there are numerous voids in the fabric. Date: Medieval to Late Post-Medieval (1200-1800) Dimensions: 52.07 mm x 51.06 mm x 25.71 mm Weight: 221 g Crudely made cast copper alloy vessels were widely used from c.1200-1800 for serving and cooking. Butler and Green (2003; 15) state 'there is evidenc…
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.


  • Thumbnail image of DOR-F367B8

Record ID: DOR-F367B8
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy foot from a cooking vessel, broken across the leg. The end of the foot is paw-like with three ridges. The underside of the foot is D-shaped in cross-section. The leg rises above and is oval in cross-section at the (old) break. The foot is crudely cast. Date: Medieval to Late Post-Medieval (1200-1800) Dimensions: Weight: Crudely made cast copper alloy vessels were widely used from c.1200-1800 for serving and cooking. Butler and Green (2003; 15) state 'there is evidence that (cast copper alloy) metal cooking vessels became increasingly common during the 1…
Created on: Friday 24th May 2013
Last updated: Friday 14th September 2018
Spatial data recorded. This findspot is known as 'Iwerne Minster', grid reference and parish protected.


  • Thumbnail image of DOR-278B32

Record ID: DOR-278B32
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of copper alloy vessel rim. An everted, pointed rim with an internal bead. The fragment is externally sooted and scored. A rim fragment from a cauldron. There is a mend in the rim where a hole has been sealed with a handmade, rolled sheet metal rivet. Date: Medieval to Post medieval - 13th to 18th century Dimensions: 75.65 mm x 43.03 mm x 6.54 mm Weight: 63.14 g
Created on: Wednesday 8th February 2012
Last updated: Saturday 11th February 2012
Spatial data recorded.


  • Thumbnail image of PUBLIC-786F63

Record ID: PUBLIC-786F63
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy vessel handle missing its terminal. The handle still retains its two fixing rivets, with an attached fragment of the copper-alloy vessel. File marks are evident and the casting is not symmetrical. The handle has a mottled olive green patina. Probably of post-Medieval date, but no parallel has been traced. Dimensions are: Vessel fragment behind rivets c.1mm, Length 132 mm, Width at attachment end 30.1 mm, Width at terminal end 13.1 mm, Thickness 7.1 mm, Weight 124grams.
Created on: Friday 9th July 2010
Last updated: Tuesday 17th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of DOR-5325FB

Record ID: DOR-5325FB
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy pot leg from a cauldron, skillet or other cooking vessel. The leg is broadly D-shaped in section with convex front and flat back. It has an old irregular break at the lower end. The leg widens and spreads outwards at the base to create the foot which is mostly lost to breaks or wear. A raised rib runs down the centre of the front of the leg, becoming more pronounced on the foot. At the top is a rounded transverse ridge. There are remains of sooting on all faces. Date: Medieval to Post medieval - c1200 - 1650Dimensions: 64.86 mm x 37.87 mm x 25.89 mmWeigh…
Created on: Tuesday 28th February 2017
Last updated: Monday 25th June 2018
Spatial data recorded.


  • Thumbnail image of DOR-871A89

Record ID: DOR-871A89
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy vessel fragment from the Medieval to Post-Medieval periods, circa 1250-1750, possibly from a cauldron or skillet. The rim is beaded internally and there are file markings on the internal surface. The rim has a straight wall on the outer surface which is pitted. Both surfaces are blackened suggesting sooting. The fragment is 29.07mm in length, 38.05mm in width and 4.36mm in thickness. It weighs 15.41g.
Created on: Wednesday 25th July 2018
Last updated: Tuesday 14th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-876D55

Record ID: DOR-876D55
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a cast copper-alloy vessel, probably a skillet or cauldron, of Medieval to Post-Medieval date, circa 1200-1700. The rim is beaded internally and there are file markings on the internal surface. The shaping of the lower section of the fragment suggests that the vessel may have had an everted rim. The object is pitted, with a blackened surface suggesting sooting. The vessel fragment is 60.91mm in length, 37.67mm in width and 4.36mm in thickness. It weighs 46.91g.
Created on: Wednesday 25th July 2018
Last updated: Tuesday 14th August 2018
Spatial data recorded.


  • Thumbnail image of DOR-9739DB

Record ID: DOR-9739DB
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy leg from a cooking vessel. The leg is broadly rectangular with a D-shaped cross section. The front is has three wide longitudinal ridges below a thick transverse collar. Above the collar are four sharper, narrower longitudinal ridges, two on either side flanking a wider central ridge to the break. The base of the foot is smoothed and worn. Date: Medieval to Post Medieval - c.1200-1700 AD. Dimensions: 38.79 mm x 18.73 mm x 10.74 mm. Weight: 32.06 g Crudely made cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-1700 for…
Created on: Monday 12th November 2018
Last updated: Monday 26th November 2018
Spatial data recorded.


  • Thumbnail image of HAMP-CF038B

Record ID: HAMP-CF038B
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval (1200-1500) copper alloy anthropomorphic object of uncertain function, consisting of a short incomplete tube 16.5mm high with recentish damage to one side and a c.4mm diameter perforation at the centre of the edge opposite. To the outside surface, around this perforation, is a short moulded neck projecting from the tube at 90 degrees. To either side are shoulders (moulded to the tube) and short but spindly arms (parallel to the neck). Extending from the neck is a humanoid head, the face an inverted pentagon in shape with triangular chin and right-angled temples. …
Created on: Wednesday 2nd January 2019
Last updated: Friday 4th January 2019
Spatial data recorded. This findspot is known as 'St. Leonards and St. Ives', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-AB4E81
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy jug, with one handle. One of three containers for the Dorchester hoard found in 1936 (IARCH-5E5FEF). It was recorded as having a height of 1 foot 3/4 inches and a diameter at the top of 4 3/4 in. and at the base 4 in. Its maximum diameter was 7 inches. The handle was decorated with a vine branch and attached to the rim by two duck's beaks and to the body by a Silenus mask. Elements of the decoration were picked out in silver inlay. It had three soldered feet that had become detached. The VCH reference below notes "The blister feet are unusual but the jug is of Wheeler's …
Created on: Tuesday 31st March 2015
Last updated: Tuesday 31st March 2015
Spatial data recorded. This findspot is known as 'Dorchester', grid reference and parish protected.


  • Image not taken

Record ID: IARCH-AB5BAC
Object type: VESSEL
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy basin or bowl. One of three containers for the Dorchester hoard found in 1936 (IARCH-5E5FEF). It was recorded as having a diameter of 1 ft 4 in. and a height of 6 in. with a footstand 1 in. high.
Created on: Tuesday 31st March 2015
Last updated: Tuesday 31st March 2015
Spatial data recorded. This findspot is known as 'Dorchester', grid reference and parish protected.


  • Thumbnail image of DOR-60DEC4

Record ID: DOR-60DEC4
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a medieval copper alloy vessel handle from a tripod skillet. The Handle is cylindrical with an angled break at the end. At the opposite end is a fragment o0f the vessel rim and body. The rim is pinted with an internal bead and the internal surface is very smooth. The surface of the handle is rough and sooted. The breaks are worn. Date: Late Medieval to Post Medieval - c. 1400 - 1700 Dimensions: 54.94 mm x 24.75 mm, The handle is 12.30 mm in diameterWeight: 48.46 g.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 1st August 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-968D21

Record ID: PUBLIC-968D21
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
The lower portion of a leg from a cast copper-alloy cooking vessel. The leg base is sub-triangular and the upper edge is sub-oval in cross section.The outer face of the leg has a prominent vertical ridge which is triangular in section and tapers towards the base. There is evidence of sooting. Due to its size,it is probably from a cauldron. These are problematic to date closely when found out of contex as they were used over a long time span; however, it almost certainly dates from the Late Medieval to post-Medieval periods. See WAW 12EF35 for a similar example.
Created on: Friday 4th June 2010
Last updated: Wednesday 11th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-53FAC3

Record ID: PUBLIC-53FAC3
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy vessel leg of medieval to post-Medieval date, circa 1250-1750. In plan, the leg is sub-rectangular, with a rounded lower edge and broken upper edge. The break is not recent. The leg is of D-shaped cross section, there is a transverse collar to the upper end, and a central faint vertical ridge running down the front, (possibly a mould line). The leg is hoof like in appearance and has a mottled green/black patina. The object is probably from a skillet, ewer or cauldron. Height of leg: 32.66 mm Width: 26.04 mm. Thickness: 16.34 mm. Weight: 47 grams. Reference Pas WAW-7E20A5.
Created on: Sunday 25th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-34F5F5

Record ID: PUBLIC-34F5F5
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy domestic vessel rim fragment from the Medieval to post-Medieval periods, circa 1250-1750. The rim is beaded internally and has a straight wall on the outer face. The piece has a matt-green patina which extends to the well worn breaks. Height of vessel: 23.68 mm. Width: 24.67 mm. Thickness: 2.93 mm. Weight:8.267 grams.
Created on: Saturday 24th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-A933F7

Record ID: PUBLIC-A933F7
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy rim from a domestic cooking vessel of circa1250-1750.The rim is thickened, with the top angled outwards creating a sharp rim. The curvature of the section suggests the bowl had a diameter of approximately 200-220 mm. All the breaks are well worn.and both surfaces have evidence of sooting and a green patina. Width of rim: 44.86 mm. Thickness at rim: 5.17 mm. Height: 27.27 mm. Weight: 25 grams.
Created on: Saturday 17th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-260A71

Record ID: PUBLIC-260A71
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy domestic cooking vessel leg of medieval to post-Medieval date, circa 1250-1750. In section, the leg is roughly eliptical,with a prominent vertical ridge to the front. This is a centre section of the leg with old breaks to each end which are smoothed and have a green patina. Externally from the breaks there is a coating of soot which is a common feature with open fire cooking. Height of leg: 38.83 mm Thickness: 19.96 mm. Weight: 140 grams.
Created on: Sunday 11th January 2015
Last updated: Thursday 12th July 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 129
Search server index: objects

You are viewing records: 1 - 100.

Search statistics

  • Total quantity: 132
  • Mean quantity: 1.023
  • Maximum: 3

Filter your search

1 - 100 of 129 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.