Record ID: NMGW-D28B2C
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A hammered gold sheet of uncertain date. The sheet has a maximum length of 51.4mm, width of 39.3mm, 0.7mm thick and weighs 14.76g. The sheet is lacking any diagnostic features so the use and date cannot be determined. Small percussion marks on the surface indicate the sheet was intentionally flattened before being deposited, discarded, or lost. Due to the uncertainty of the date, the object is not considered Treasure under the Treasure Act 1996.
Created on: Friday 2nd February 2024
Last updated: Friday 2nd February 2024
Spatial data recorded.

Record ID: WAW-EAE471
Object type: CASTING WASTE
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A probable corroded cast copper alloy casting jet or "gate". The object is roughly sub-trapezoidal in plan with a concave reverse and convex, domed top with two sub-rectangular sprue projections near the top. The surfaces are textured with pits from abrasion. This type of object is the result of casting into a mould and represents waste where molten bronze solidifies at the entrance of the mould around the gate and the casting channel/channels. Casting waste is difficult to date, and can potentially be prehistoric to post Medieval. The object may be Bronze Age in d…
Created on: Wednesday 10th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WAW-9FE15A
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy object of unknown date, likely Roman to Post Medieval (c. AD 43-1800). The object is rectangular in plan and profile and has a central oval perforation (7.87mm long, 5.67mm wide). At the bottom of the object, it is 14.94mm wide and 3.75mm thick, stepping up to 16.04mm wide and 5.15mm thick and then gradually increasing to 18.57mm wide and 6.07mm thick just before the break at the top and then to 7.35mm thick at the break. Whilst the bottom two thirds of the object appear to be solid, it does appear as if there may be a short section near the top t…
Created on: Thursday 9th March 2023
Last updated: Thursday 6th July 2023
Spatial data recorded.

Record ID: WAW-48B0CD
Object type: AXE
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, iron axehead of unknown date, probably Early Medieval to Modern (c. AD 900-1900). The axehead starts at 96.77mm high near the blade, tapering to 53.98mm high near the back whilst also expanding from 6.01mm wide to 18.78mm wide towards the back of the head. At this point, it suddenly curves towards a triangular section that starts at 7.34mm wide and tapers to 3.51mm wide near the end. There are no remains of a socket and the axe is corroded and incomplete. Dimensions. Length: 109.21mm. Width: 18.78mm. Height: 96.77mm. Weight: 570g.
Created on: Thursday 22nd December 2022
Last updated: Tuesday 10th January 2023
Spatial data recorded.

Record ID: WAW-B48876
Object type: STUD
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy stud of uncertain date ranging from Roman to Post Medieval (c. AD 43-1700). The head is sub-oval with a convex outer surface and a concave reverse. Parts of the head are missing. There is an integral shank with a square cross section that tapers to a point, and it is now slightly off-centre of the currently existing head. The surface of the stud is worn and has a light green patina. Dimensions. Length: 15.68mm. Width: 14.59mm. Height: 10.43mm. Weight: 3.11g.
Created on: Thursday 15th December 2022
Last updated: Thursday 6th July 2023
Spatial data recorded.

Record ID: NMGW-E2C2AB
Object type: BEAD
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A near-complete cast tin alloy bead of unknown date. The bead is roughly circular in plan and sub-oval in section with external diameter of 13.6 and 8.5mm thick. The central perforation is warped but the side with less warpage has an internal diameter of 5.8mm x 3.9mm. The bead lacks diagnostic characteristics so a definite date cannot be obtained, however two tin beads are recorded from Medieval (15th century) contexts and examples are described by Egan and Pritchard (2002: 315-316 no. 1584, 1585). The metal is a medium grey and shiny in places with a weight of 4.17g. References…
Created on: Monday 6th June 2022
Last updated: Thursday 16th June 2022
Spatial data recorded.

Record ID: WMID-39F84B
Object type: INTAGLIO
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A complete copper alloy possible intaglio, of uncertain dating but probably Post Medieval (AD 1600 to AD 1700). The possible intaglio is oval in shape. It has a flat cross section. Various facets have been removed from the top edge. No design appears to be present on the top surface. The reverse surface is recessed in the centre. It measures 12.6 mm in length, 9.7 mm wide and 4.7 mm thick. It weighs 2.8 g. The possible intaglio is a dark brown to shiny yellow colour.  The shape and size of this artefact is similar to that found as intaglios either for finger rings or for fob s…
Created on: Tuesday 17th May 2022
Last updated: Tuesday 17th May 2022
Spatial data recorded.

Record ID: WAW-282021
Object type: COIN
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A very worn silver coin of unknown denomination or date. Obverse description: worn away. Obverse inscription: illegible. Reverse description: worn away. Reverse inscription: illegible. Diameter: 19.47mm. Thickness: 0.96mm. Die axis: unknown.
Created on: Tuesday 8th February 2022
Last updated: Thursday 10th March 2022
Spatial data recorded.

Record ID: NMGW-AABB8D
Object type: WEIGHT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Perforated stone weight of uncertain date possibly medieval The weight is of irregular rectangular form (93.9mm long, 66.6mm wide and weighing 150.5g), of variable thickness (with a maximum thickness of 19.5mm) and is made from a coarse-grained sandstone. The top edge and one of the side edges appear to be moderately rounded and are likely to be unmodified, while the other two edges are irregular and probably trimmed to the desired shape. The perforation is circular (10.6mm diameter) and is wider at one face, but appears to have been drilled rather than pecked. One face (convex) …
Created on: Wednesday 4th August 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded.

Record ID: NMGW-04CB62
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Decorated copper alloy rod of uncertain date The rod now forms an open, sub-oval ring but was of uncertain original from (with a length of 48.1mm, a height of 35mm, a straightened length of approximately 106mm and a weight of 5.5g) and is broken on one end. The complete terminal is flattened (with a thickness of 1.6mm and 4.0mm wide) but the loss of the surface has removed any decoration. The rod is of sub-square section (4.0mm wide and 3.5mm thick) and is decorated with closely spaced ribbing. The decoration covered all four sides of the rod but has worn away on the upper face, …
Created on: Tuesday 26th January 2021
Last updated: Tuesday 26th January 2021
Spatial data recorded.

Record ID: NMGW-EFE39C
Object type: FIGURINE
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Copper alloy bird figurine of uncertain date, possibly Roman The cast zoomorphic figurine is of a bird, perhaps an eagle with splayed wings and is near-complete. Missing part of the base or attachment pin (with a surviving length of 39mm and a weight of 24.8g). The bird is depicted with head with its head facing to one side. The truncated beak is open and the eye is depicted with an incised ring-and-dot. The neck (with a length of 10mm) widens to breast. The outstretched wings (with a thickness of 2.0mm – 2.8mm and giving a width of 40.0mm) are axe-shaped. The tail expand to it…
Created on: Monday 25th January 2021
Last updated: Monday 25th January 2021
Spatial data recorded.

Record ID: GLO-5EA0A2
Object type: DEBITAGE
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Flint debitage, this is a tertiary flake. The flint has a large bulb of percussion on the ventral and mutable flaking scars on the dorsal. There as small flaking scars on both sides of the flint, but this is the result of natural process rather than knapping. Dark grey flint with lighter patches that has a general prehistoric date
Created on: Thursday 1st October 2020
Last updated: Thursday 1st October 2020
Spatial data recorded.

Record ID: GLO-5BAA54
Object type: DEBITAGE
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Flint debitage, this is a tertiary flake. This is a long thin flake with a convexo-concave profile. There are two arrises on the dorsal and a small bulb of percussion on the ventral. there are chips taken out of one side but this natural damage rather that reworking. Mode grey flint with lighter speckles.
Created on: Thursday 1st October 2020
Last updated: Thursday 1st October 2020
Spatial data recorded.

Record ID: NMGW-7BCD74
Object type: DEBITAGE
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A complete flint flake dating from between the Mesolithic and Bronze Age. The flake is roughly triangular in shape and has a white patinated surface. The dorsal surface bears multiple removal scars, including many hinged and stepped fractures at the proximal end. The butt is still present and is simple. This flake is likely debitage, perhaps a rejuvenation flake.
Created on: Thursday 27th August 2020
Last updated: Tuesday 1st December 2020
Spatial data recorded. This findspot is known as 'Stretton Grandison', grid reference and parish protected.

Record ID: NMGW-7BC28D
Object type: BEAD
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Four handmade glass beads of differing colours and manufacturing methods. Dates unknown, may range from the Roman period to the 19th century. An opaque yellow glass bead with cylindrical, slightly tapering form. Produced by forming molten glass around a rod and rolling to form the smooth sides of the bead. The PAS database has two records of similar shaped beads, SWYOR-110E90 and YORYM-B2E6D4, which are tentatively dated as early medieval. 6.8mm long, 8.7mm diameter, 0.77g. A globular bead of transparent light blue-green glass. The bead has been produced by drilling the …
Created on: Thursday 27th August 2020
Last updated: Tuesday 1st December 2020
Spatial data recorded. This findspot is known as 'Stretton Grandison', grid reference and parish protected.

Record ID: HESH-96BA8A
Object type: HAMMER
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A complete cast copper alloy hammer or possibly small anvil of unknown - probably post medieval, date. The body of the hammer comprises of a cylindrical shape which tapers at both ends - one into a wedge shape the opposite into a four sided point. The remains of an iron riod extends from one face and it is at this point that one egde is wide than the other. A direct paralell has not been found but given the method of manufacture and also the patina it is most likely to post medieval (1500-1800) The artefact measures 81.5mm length, 31.5mm width and is 28.0mm thick; the iron rod has …
Created on: Monday 11th November 2019
Last updated: Thursday 30th January 2020
Spatial data recorded. This findspot is known as 'Weobley', grid reference and parish protected.

Record ID: HESH-B01393
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Copper Alloy unidentified object, rectangular in plan, oval in cross section, with a swelling at the midpoint. This object is a copper blue with a light brown. An unknown feature which runs across half of one face stopping in the midpoint indicates that it became detached from a larger object. 30.29mm in length, 10.23mm in width and 6.32mm in height. It weighs 3.90 grams
Created on: Friday 26th July 2019
Last updated: Thursday 31st October 2019
Spatial data recorded.

Record ID: HESH-092832
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A cast lead alloy / pewter strip of uncertain date and function - it is triangular in section with a raised longitudinal seam on the upper face. The metal is a mid grey colour with an even 'pewter like' patina. This object has a length of 29.55mm, a width of 21.46mm and a thickness of 4.58mm; it weighs 9.4 grams
Created on: Friday 12th April 2019
Last updated: Monday 17th October 2022
Spatial data recorded.

Record ID: HESH-078129
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A cast copper alloy hoop of copper alloy - possibly from a knife handle of uncertain date. The artefact has a dark grey green colour with well formed surface patina. The artefacts measures / has a diameter of 14.00mm and a height of 15.94mm; the metal is 1.8mm thick. It weighs 5.8 grams
Created on: Friday 12th April 2019
Last updated: Wednesday 3rd July 2019
Spatial data recorded.

Record ID: HESH-056353
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A cast copper alloy rectangular loop of uncertain date. The aperture of the loop measures 18.1mm x 2.3mm. The loop is a mid grey green colour with a laminated surface which has a mid brown colour. It measures / has a length of 30.34mm, a width of 12.65mm and a thickness of 3.3mm. It weighs 3.9 grams.
Created on: Friday 12th April 2019
Last updated: Wednesday 3rd July 2019
Spatial data recorded.