Record ID: NLM-FB4A13
Object type: RING
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead alloy ring fragment. One half of a cast lentoid-section ring, broken in antiquity and patinated overall. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Diameter: 54mm, Band Width: 8.7mm, Band Thickness: 5.9mm, Weight: 32.08gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FA06F5
Object type: STYLUS
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible stylus. Cast round section rod with a moulded point at one end, flat at the other. The form closely resembles that of both lead dry-points of medieval date and the similar lead pencils for schoolroom use which are of later post-medieval date. Late Roman finds are prominent in the vicinity, so this may be a fragment wjhich has lost the spatulate eraser usually associated with Rpman styli. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 42.6mm, Diameter: 5.1mm, Weight: 6.14gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-F9CA2E
Object type: WEIGHT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead weight, made from offcut. A fragment of cast lead of trapezoid section, with cut and chatter marks on all sides; patinated. The mass might approach that of one lighter Viking-Age Ora/Ore comprising six sub-units of 4.07gms to enable use as a weight at that time, though the correspondence with that value is less exact than would normally be deemed significant by this reporter. Other finds from the vicinity are of mainly Roman date, though with later material present. Suggested date: Unknown, Roman to Early Medieval, 43-950 Length: 24.0mm, Width: 15.3mm, Thickness: 9.3mm, Weight: 23.22gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-E84488
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead metalworking debris. A small droplet of solidified lead melt, patinated. Suggested date: Unknown, Roman to post-Medieval, 43-1800 Length: 21.7mm, Thickness: 6.3mm, Weight: 6.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E6CAF3
Object type: PIN
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy pin. A small pin with a tapered square-section shank and an expanded integrally cast globular head. This might alternatively have functioned as a rivet. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 17.1mm, Diameter (head): 4.7mm, Weight: 0.74gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E64FA1
Object type: DISC
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead disc. A small lead disc, probably cast as a border appears on one side, with a narrow lug or sprue projecting from one edge, damaged at the opposite edge. Patinated. Suggested date: Unknown, Medieval to Post-Medieval, 1200-1800 Length: 17mm, Width/Diameter: 13.9mm, Thickness: 1.4mm, Weight: 1.55gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E565DA
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A fragment of cast lead sheet of structural gauge with a roughly textured underside [as cast] suggesting manufacture of the sheet using a sanded surface. This is the mark of a professional scheme of casting work. One or two adjacent edges are cut; the object has subsequently been partly melted. Patinated. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Length: 59.7mm, Width: 35.3mm, Thickness: 4.4mm, Weight: 67.78gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E52CC6
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A rectangular fragment of lead sheet which has been cut on all sides, folded or rolled, lightly grooved or scratched in one direction; now patinated. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Length: 25.2mm, Width (as found): 16.5mm, Thickness (sheet): 2.4mm, Weight: 15.89gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E4F454
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead possible spindle whorl. Cast globular or bun-shaped whorl with opposed flat sides and with a slightly off-centre square moulded aperture of c.8mm square; patinated, with a cut by the hole on one side which might represent a tying notch. The thick patina points to an object of some age. If indeed a whorl – the square hole would be an aberrant feature – the spindle hole size would fall between the ranges accepted for earlier and later parts of the early medieval period. Whorls in other materials acquired lathe-turned globular forms from about the 13th century, which migh…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-66FB8E
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
Workflow stage: Awaiting validation
Copper alloy metalworking debris. A small trail of solidified copper allot melt, presumably spillage from an episode of casting or recycling. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Length: 25.3mm, Weight: 5.23gms
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
No spatial data available.

Record ID: NLM-D53320
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
Lead spindle whorl. Cast flat-sided whorl with a central moulded aperture of diameter 7mm and  rounded outer edge. Patinated. The spindle hole size could admit a Roman or Anglo-Saxon date while the mass would permit use spinning a fine yarn. Patinated and fiercely abraded. Suggested date: Unknown, Roman to Early Medieval, 43-850 Diameter: 19.2mm, Thickness: 4.6mm, Weight: 8.16gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'South Owersby', grid reference and parish protected.

Record ID: NLM-2D1104
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead metalworking debris. Forty-four small scraps of lead melt or partly melted cast lead sheet, much of which has set on a flat surface; patinated. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Combined Weight: 459.49gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-2CA60B
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcuts. Eleven fragments of cast lead sheet of structural gauge, all with one or more cut edges; patinated. Reported along with a mass of lead melt. Such scraps may have been gathered for recycling. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Thickness (up to): c.5mm, Combined Weight: 211.51gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-2A2BC1
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead probable spindle whorl. Cast cylindrical whorl with a central moulded aperture of diameter 11.6mm, Walton Rogers form B. A possibly moulded design has been partially carried over to one flat side only, unless these irregularities represent shrinkage in an open mould, and lipping appears on the opposite side. Patinated, and probably lightly distorted. The mass points to a primary function plying cord, if not as a flywheel for some other mechanical purpose. The size of spindle hole could admit an Anglo-Scandinavian date, but the possible decoration on one side might rather point to …
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-292B05
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead metalworking debris. Five small scraps of melt and foil, the latter of thickness 1.1mm. Patinated. From over a wide area. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Combined Weight: 13.75gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

Record ID: NLM-19AF0E
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A thin scrap of cast lead sheet of thickness 3.1mm, with cut edges, a deep knife cut on one side, and an open crosshatch of similarly deeply incised lines on the other. Patinated. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 32.4mm, Width: 8.8mm, Thickness: 3.1mm, Weight: 6.22gms
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: NLM-196D84
Object type: BALANCE
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible balance fragment. A short rounded bar with slotted ends, one perhaps retaining a rivet or pivot with a sliver of another object, perhaps the end of a pivoting bar; and the other end possibly broken across the hole for another rivet or axle. Abraded. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 17.1mm, Diameter: 4.4mm, Weight: 1.05gms
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: NLM-192514
Object type: CHAIN
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy chain fragment. Two links of a chain, each comprising a round-section cast bar of length 44mm with a constriction and bend at either end, two ends being linked to each other and the others being broken across their thinnest point. This might be from a light suspension chain, though other uses might be posited. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 81.6mm, Diameter: 3.2mm, Weight: 4.85gms
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: NLM-C4E04E
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy unidentified object. Triangle of thin sheet metal with two rounded corners and two tiny [diameter 1.1mm] holes, one blind. Possibly for a small value from a set of chemist’s weights. The discovery of a scale of Roman lorica squamata (NLM-C42002) which also has cut corners, reported along with this object, might alternatively suggest this to be another piece of scale armour, albeit of different form. Suggested date: Unknown, Roman to Post-Medieval, 43-1850 Length: 12.9mm, Width: 13.3mm, Thickness: 0.7mm, Weight: 0.45gms
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.

Record ID: NLM-C3C968
Object type: EAR RING
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible earring. A cast penannular D-section oval hoop, tapered towards one pointed end and one blunt end. A similar object (NLM-C1F814) was recently reported from the vicinity. Suggested date: Unknown, Roman to Early Medieval, 43-1000 Length: 23.1mm, Width: 17.5mm, Thickness: 2.9mm, Weight: 1.89gms
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.