Record ID: FAKL-8CE912
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
Unidentified, copper alloy fitting of unknown, date; it consist of a piece of sheet metal curved around to form a 3.8mm wide gap; its upper edge is curved, the two sides taper and it is slightly curved down its length. The surface has been tinned. Similar clips are common in Anglo-Saxon graves were they represent parts of wooden vessels, it would, however, be unsafe to assume an Early Medieval date for this find. Length 19.0mm Width 17.1mm tapering to 8.2mm. 0.7mm thick sheet metal, Mass 1.98g
Created on: Monday 23rd September 2019
Last updated: Wednesday 25th September 2019
Spatial data recorded.

Record ID: FAKL-668733
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Published
Cast copper alloy fitting, hollow, D sectioned with a 2.0mm wide x 0.9mm deep, square sectioned, transverse rib around its wider end. Both ends are now open but the opening on the flatter end may be a result of damage. The date and function of this object are unknown. It section, at 2.1mm at the open end and 1,0mm at the open end is too thin for it to be a Bronze Age gouge and a later date seems likely. Length 46.5mm, Width 27.6mm, Thickness 14.5mm, Mass 35.86g (including earth fill).
Created on: Monday 10th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.

Record ID: FAKL-169D16
Object type: PIN
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Published
Pin, copper alloy, the shank has an irregular section c. 3.5mm in diameter,from which it tapers to a point. Its surface appears scaled and fibrous. On the other end is a flat sectioned 3.8 x 2.2mm loop the end of which is tapered to 3.3mm in diameter and scrolled around the shank. No parallel has been found for this object and it might date from the Iron Age or Early Medieval periods. Length 102.4mm, Diameter 3.5mm, Width 13.3mm, Mass 8.95g
Created on: Wednesday 15th June 2016
Last updated: Wednesday 15th June 2016
Spatial data recorded.

Record ID: FAKL-FE081E
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Cast copper alloy object of unknown function and date. Lentoid with a D shaped section tapering toward each end, it is divided down its length into three zones by two narrow, longitudinal ribs betwee which are three bands of angled ribs defined by grooves giving a herring-bone effect. The underside of the object is slightly curved longitudinally and bears some faint hammer marks. Length 25.7mm, Width 10.0mm, Thickness 5.1mm, Mass 5.33g.
Created on: Saturday 2nd April 2016
Last updated: Saturday 2nd April 2016
Spatial data recorded.

Record ID: FAKL-937A64
Object type: WEIGHT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Lead weight of uncertain date, shape irregular but broadly a flat topped cone. Through its length is a 2.3mm diameter hole. Diameter 16.7mm tapering to 9.5mm, Height 16.1mm, Mass 20.21g..
Created on: Sunday 3rd January 2016
Last updated: Sunday 3rd January 2016
Spatial data recorded.

Record ID: FAKL-403820
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Unidentified and undated object made from cast copper alloy and iron. The object has a hollow, plano-convex section with an iron core. Iron corrosion products are also present on the object's flat back. The main part of the object appears to have been parallel sided but has been damaged and truncated, resulting in the loss of most of what much have been a D shaped socket which contained iron. The other end of the object is narrowed and constists of a transverse moulding from which extends an expanding projection. This has angled faces and terminates in a transverse fracture. Detail of…
Created on: Wednesday 30th December 2015
Last updated: Wednesday 30th December 2015
Spatial data recorded.

Record ID: FAKL-71E224
Object type: LITHIC IMPLEMENT
Broad period: UNKNOWN
County: Norfolk
Workflow stage: Published
Piece of flint covered with ochreous iron staining, One face covered with cortex, the other bears signs of a conchoidal fracture, some limited edge flaking, scaled, semi-abrupt. Some of the flaking post dates the iron staining. Length 91.1mm, Width 78.4mm, Thickness 23.0mm, Mass198.70g
Created on: Monday 17th March 2014
Last updated: Saturday 12th April 2014
Spatial data recorded.

Record ID: FAKL-71C812
Object type: LITHIC IMPLEMENT
Broad period: UNKNOWN
County: Norfolk
Workflow stage: Published
Piece of flint covered with ochreous iron staining, Keel-shaped dorsal formed by the removal of converging, scaled, semi-abrupt flakes surrounding a large, concave flake scar. Some signs of battering and of damage to the iron stained surface. The ventral surface is covered by a single, conchoidal flake scar. Length 125.5mm, Width 62.7mm, Thickness 44.2mm, Mass 326.30g
Created on: Monday 17th March 2014
Last updated: Saturday 12th April 2014
Spatial data recorded.

Record ID: FAKL-719DB2
Object type: LITHIC IMPLEMENT
Broad period: UNKNOWN
County: Norfolk
Workflow stage: Published
PIece of flint covered with ochreous iron staining, one face covered with cortex, the other bears a single, conchoidal fracture with a second flake removed from the area of its bulb of percussion. Around the edges are traces of scaled, semi-abrupt, flaking, some of which appears to post-date the iron staining. There also appears to be some traces of later damage. Length 115,0mm, Width 91.6mm, Thickness 30.0mm, Mass 343.20g
Created on: Monday 17th March 2014
Last updated: Saturday 12th April 2014
Spatial data recorded.

Record ID: FAKL-714917
Object type: LITHIC IMPLEMENT
Broad period: UNKNOWN
County: Norfolk
Workflow stage: Published
Piece of flint covered with ochreous iron staining and bearing extensive evidence of conchoidal flaking. Some areas of cortex present, one corner bears traces of battering. The implement tapers to a rounded point which appears to have been produced by the removal of scaled, semi-abrupt flakes from the dorsal face. The ventral surface is formed by a single, conchoidal fracture, although some attempt may have been made to reduce the bulb of percussion. There appear to be some traces of later damage. Lenght 142.4mm, Width 113.3mm, Thickness 45.0mm, Mass 769.8g
Created on: Monday 17th March 2014
Last updated: Saturday 12th April 2014
Spatial data recorded.

Record ID: FAKL-0243E2
Object type: STUD
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Published
Copper alloy stud or rivet, 7.4mm diameter oblate head separated from the shank by a sharp edged moulding. Shank unbroken and complete, some signs of expansion due to hammering/riveting on end. Function unknown but probably some form of box fitting, undated. Length 13.2mm, shank diameter 3.2mm, Mass 2.24g.
Created on: Monday 23rd September 2013
Last updated: Wednesday 2nd October 2013
Spatial data recorded.

Record ID: FAKL-A4E548
Object type: LITHIC IMPLEMENT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Flint implement, irregular shape, translucent, mid-grey flint, some cortex, coarse/natural flaking but one edge heavily battered/crushed. Difficult to date: Neolithic-recent, it could be a hammer-stone or a strike-a-light. Length 42.6m; Width 30.1mm; Thickness 13.1mm; Mass 23.78g
Created on: Tuesday 13th August 2013
Last updated: Tuesday 21st January 2014
Spatial data recorded. This findspot is known as 'Kettlethorpe', grid reference and parish protected.

Record ID: FAKL-0418E3
Object type: HAMMERSTONE
Broad period: UNKNOWN
County: Lancashire
Workflow stage: Published
Oblate hammerstone made from quartzite the surface of which is dark brown. Around the equator is a band of marks left by hammering. On the opposite side of the equator is a smaller battered area. Not datable but probably Prehistoric. 51.6 x 49.6mm diameter x 40.8mm High.
Created on: Sunday 30th June 2013
Last updated: Sunday 30th June 2013
Spatial data recorded. This findspot is known as 'Laneshaw Bridge', grid reference and parish protected.

Record ID: FAKL-73BCE4
Object type: BEAD
Broad period: UNKNOWN
County: Bradford
Workflow stage: Published
Possible bead made from pale grey silica frit with a very open texture: faience? Cylindrical with circumferential ribbing around exterior. The interior also bears circumferential ribbing which resembles a screw thread but does not appear to be helical. No trace of glazing. Length 5.6mm, Outside diameter 8.2mm, Inside diameter 3.5mm, Mass 0.30g
Created on: Tuesday 11th June 2013
Last updated: Monday 20th January 2014
Spatial data recorded. This findspot is known as 'Ilkley Moor', grid reference and parish protected.

Record ID: FAKL-246B85
Object type: RING
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Published
Ring, cast copper alloy made from a strip of metal 12.3 wide x 5.2 thick rolled around to form a 21.0mm diameter ring with a butt jointed seam. Outer face of strip has rounded edges. Asymmetric and not well finished. Diameter 21.0mm: Height 12.3mm; Mass 18.18g
Created on: Monday 18th February 2013
Last updated: Monday 18th February 2013
Spatial data recorded. This findspot is known as 'Saxton', grid reference and parish protected.

Record ID: FAKL-240823
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Published
Unidentified object consisting of a 1.4mm thick disc, both faces silvered. In its centre is a projecting pin, 2.2mm diameter x 0.3mm high. It is unclear if it is visible on the other face. On one side of the disc is an integral projection, rectangular, 4.5 x 2.5mm, stepping down to 3.3 x 3.3mm. This may represent the damaged end of a shank. Through the projection is rivet with a 2.0mm diameter head, on the other side of the projecting plate are two curved arms 2.0mm wide x 1.1mm thick which follow the edge of the disc for 6.5mm. A notch on the edge of the disc opposite the projection …
Created on: Monday 18th February 2013
Last updated: Monday 18th February 2013
Spatial data recorded. This findspot is known as 'Saxton', grid reference and parish protected.

Record ID: FAKL-0E6DE7
Object type: PIN
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Published
Pin or spike, cast copper alloy, one end truncated (hackly fracture), other pointed, signs of longitudinal faceting down length. Date and function unknown. Length 57.1mm, Diameter 5.4mm, Mass 7.43g.
Created on: Sunday 17th February 2013
Last updated: Monday 18th February 2013
Spatial data recorded. This findspot is known as 'Saxton', grid reference and parish protected.

Record ID: FAKL-FD4A16
Object type: RING
Broad period: UNKNOWN
County: York
Workflow stage: Published
Copper alloy ring, plain flat section with rounded/bevelled edges. Irregular shape with tooling marks. The function and date of these rings is unknown but they are unsuited for use as finger rings or dress fittings. Rings of this type are not uncommon and may have been used in a variety of ways.
Created on: Monday 6th August 2012
Last updated: Tuesday 14th August 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-BB20F2
Object type: STRAP FITTING
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast copper alloy strap slider, rectangular with one side thickened to 4.0 x 2.8mm from which the section steps down to 2.0mm thick. Clearly hand-made but not datable, in view of the amount of archaeological material from this field it is considered worthy of record.
Created on: Friday 3rd August 2012
Last updated: Tuesday 14th August 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-BAC0E5
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast copper alloy ring, roughly made and probably unfinished. Section circular c.2.6mm diameter, irregular. One end terminates in a point the other appears broken. Not datable but owing to the large amount of cultural debris from this field and in view of other mis-cast objects from the site was considered worth of record.
Created on: Friday 3rd August 2012
Last updated: Monday 15th April 2013
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-698EB5
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead object, in the form of a low cone, covered with sharply defined radial ribs. Part of disc missing, back appears to have been cast in an open mould. Not datable. This object may be one of the lead objects often found which appear to have no function and owe their origin to the ease with which lead can be cast.
Created on: Monday 30th July 2012
Last updated: Tuesday 14th August 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-6970A7
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead cylinder, base flat, top slightly rounded suggesting that it was cast in an open mould. Shape irregular with some grooves around sides. Not datable.
Created on: Monday 30th July 2012
Last updated: Tuesday 14th August 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-64C256
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead cone, sides slightly curved, irregular, small shrinkage cavity on underside. The date and function of this object are unknown but it bears some resemblance to Viking period weights making it worthy of recording.
Created on: Monday 30th July 2012
Last updated: Tuesday 14th August 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-FD2C27
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast copper alloy strip, rectangular section with slightly raised edges, at one end is a 6.0mm diameter hole flanked by three projecting spikes. The other end is split and contains the corroded remains of iron. While this object has not been dated and a recent date is suspected the presence in the area of much historical material makes it worth recording.
Created on: Wednesday 25th July 2012
Last updated: Thursday 9th August 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-C9E804
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead weight, domed/ plano-convex with a 5.0mm diameter central hole set set off-centre. Poorly shaped and irregular.
Created on: Monday 4th June 2012
Last updated: Monday 4th June 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-C9D830
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead weight, annular, plano-convex with a 13.7mm diameter central hole set set off-centre. Ancient damage to one side. Not datable.
Created on: Monday 4th June 2012
Last updated: Monday 4th June 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-C9C9A3
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead weight, annular, square section both faces marked by circumferential groove which may be an inadvertent product of the casting process. Central hole 10.9mm diameter. Not datable.
Created on: Monday 4th June 2012
Last updated: Monday 4th June 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-C9B7E8
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead weight or, possibly, a spindle whorl. Domed/plano-convex shape, neat central hole 8.9mm diameter. Not datable.
Created on: Monday 4th June 2012
Last updated: Tuesday 5th June 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-C994F2
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead weight, domed/plano-convex, central hole 6.7mm diameter, set off-centre, the object is generally irregular. Not datable.
Created on: Monday 4th June 2012
Last updated: Monday 4th June 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-C98586
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead weight, conical, sides faceted forming an octagon. Underside flat with a central shrinkage cavity, top also flat with traces of an iron wire suspension loop. Not datable, other finds from the site show activity over a long period of time which, again, is not helpful in suggesting a date.
Created on: Monday 4th June 2012
Last updated: Monday 4th June 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-C95733
Object type: WEIGHT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast lead weight, annular with a square section. No features that might allow it to be dated. The 9.8mm diameter hole is slightly off-centre making it unlikely that this is a spindle whorl.
Created on: Monday 4th June 2012
Last updated: Monday 4th June 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-D14D84
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Strip of sheet copper alloy tapering along its length from 7.2mm to 4.0mm, its thickness also tapering from 2.0mm to 1.6mm. One end rounded, the other broken. Poorly centred in the broader, rounded end is a 3.0mm diameter hole. Funcion and date unknown.
Created on: Friday 11th May 2012
Last updated: Friday 11th May 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-D10952
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Copper alloy plate, tongue-shaped with a 3.3mm diameter hole at the squared end. The function and date of this object are uncertain, it could be some sort of pendant or a simple strap end.
Created on: Friday 11th May 2012
Last updated: Friday 11th May 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-B93C16
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Cast copper alloy object semi-cylindrical in form, its end asymmetrical and pointed. The function and date of this object are unknown and it might represent casting spillage.
Created on: Thursday 10th May 2012
Last updated: Thursday 10th May 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-B8E904
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: York
Workflow stage: Published
Object made from 1.0mm thick copper alloy sheet, rolled to from a cone; open top, now broken and torn,apex of cone also open. This object resembles the chape from a scabbard but appears to be too open for this function and it might be paralleled by two other finds from this site; FAKL-A76683 and FAKL-A8EE36.
Created on: Thursday 10th May 2012
Last updated: Thursday 10th May 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

Record ID: FAKL-E9BF91
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Fragment of a strip of sheet copper alloy, bent across its width to form a ridge-like curve. Through one end is a 2.3mm diameter hole, the other end is torn and is torn and truncated. Not datable but included in view of the other material found in the immediate area.
Created on: Sunday 5th February 2012
Last updated: Wednesday 8th February 2012
Spatial data recorded. This findspot is known as 'North Kesteven', grid reference and parish protected.

Record ID: FAKL-E9A4E4
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Fragment of what may have been a sheet copper alloy vessel, Shape triangular, folded to form a double layer, one corner tuned down to form a dog-ear, through one corner is a 4.0 x 3.0mm nail hole. Not datable but included in view of the other material found in the immediate area.
Created on: Sunday 5th February 2012
Last updated: Wednesday 8th February 2012
Spatial data recorded. This findspot is known as 'North Kesteven', grid reference and parish protected.

Record ID: FAKL-E99131
Object type: VESSEL
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Fragment of what is likely to have been a sheet copper alloy vessel, Shape irregular, folded, no sign of an original edge or any features. Not datable but included in view of the other material found in the immediate area.
Created on: Sunday 5th February 2012
Last updated: Wednesday 8th February 2012
Spatial data recorded. This findspot is known as 'North Kesteven', grid reference and parish protected.

Record ID: FAKL-E8D688
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Iron object in the form of a wing-shaped plate, it corners swept back and its underside slightly concave. On the top of the plate is what looks like a swept back fin. The function and date of this object are unknown but in view of the other material coming from the immediate area it is considered to be worthy of record.
Created on: Sunday 5th February 2012
Last updated: Wednesday 8th February 2012
Spatial data recorded. This findspot is known as 'North Kesteven', grid reference and parish protected.

Record ID: FAKL-E8C116
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Published
Strip of sheet copper alloy, rectangular, one end truncated, through the other are three 1.7mm diameter holes. Surfaces corroded but plain. Date and function unknown.
Created on: Sunday 5th February 2012
Last updated: Wednesday 8th February 2012
Spatial data recorded. This findspot is known as 'North Kesteven', grid reference and parish protected.

Record ID: FAKL-AD93A6
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Lead weight, annular/cylindrical with slightly tapering sides, out side 28.0-20.8mm, hole 11.2-9.0mm. Roughly finished, undecorated.
Created on: Sunday 16th October 2011
Last updated: Tuesday 18th October 2011
Spatial data recorded. This findspot is known as 'Burton Fleming', grid reference and parish protected.

Record ID: FAKL-3230B6
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Cast lead weight, oblate with a slightly flattened lower face. Hole 6.4mm diameter, slightly off-set.
Created on: Friday 16th September 2011
Last updated: Sunday 18th September 2011
Spatial data recorded. This findspot is known as 'South Cave', grid reference and parish protected.

Record ID: FAKL-30A985
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Cast lead weight, pyramidical with a 3.0mm diameter hole at its apex.
Created on: Saturday 23rd April 2011
Last updated: Sunday 22nd May 2011
Spatial data recorded. This findspot is known as 'Ellerker', grid reference and parish protected.

Record ID: FAKL-2C9DB6
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Small, irregular plano-convex weight with a 6.9mm diameter hole.
Created on: Saturday 23rd April 2011
Last updated: Sunday 22nd May 2011
Spatial data recorded.

Record ID: FAKL-2C1957
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Cast lead weigth, tall pyramidical with a small flat top. The underside concave with a hole, 6.0mm diameter x 10.0mm deep in its centre.
Created on: Saturday 23rd April 2011
Last updated: Sunday 22nd May 2011
Spatial data recorded.

Record ID: FAKL-DA4198
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Weight in the form of an orthorhombic block of cast lead. Faces plain with some signs of battering, corners rounded.
Created on: Tuesday 19th April 2011
Last updated: Sunday 22nd May 2011
Spatial data recorded. This findspot is known as 'Newbald', grid reference and parish protected.

Record ID: FAKL-D81113
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Cast lead weight, trapezoid tapering from 8.0 to 12.6mm, thickness also tapers 3.8 to 5.6mm. Hole at one end, 3.2mm diameter, the presence of a burr suggests that it was drilled after the weight was cast.
Created on: Tuesday 19th April 2011
Last updated: Sunday 22nd May 2011
Spatial data recorded. This findspot is known as 'Newbald', grid reference and parish protected.

Record ID: FAKL-6FF567
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Unidentified cast copper alloy object. Cylindrical with an off-set hole down its length, at one end this is surrounded by an angled edge. Around the outer surface of the cylinder are two broad circumferential grooves.The object's finish is generally poor.
Created on: Wednesday 19th January 2011
Last updated: Saturday 19th February 2011
Spatial data recorded. This findspot is known as 'Burton Constable', grid reference and parish protected.

Record ID: FAKL-D49596
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Piece of jet, irregular but generally flat. Through it has been drilled a 6.3mm diameter hole which burst through on one side causing some of the surface to break away. One face bears parallel scratch marks and two roughly cut grooves suggesting that an attempt had been made to remove the ends making the piece more symmetrical.
Created on: Wednesday 24th November 2010
Last updated: Thursday 25th November 2010
Spatial data recorded. This findspot is known as 'Near Driffield', grid reference and parish protected.

Record ID: FAKL-26E506
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Fragment of a perforated stone object, disc shaped with a flattened oval section 35.4 x 16.0mm. Hole, 22.3mm diameter chipped through centre, hour-glass type perforation. The object is irregularly shaped and has suffered much damage, only half survives and one face of this half is missing. Stone fine grained with some particles of angular quartz. It likely to be a quartz dolerite from the Whin Sill which would suggest a late Neolithic - early Bronze Age date. The exterior of the object is light brown, the interior mid grey.
Created on: Tuesday 16th November 2010
Last updated: Thursday 25th November 2010
Spatial data recorded. This findspot is known as 'Near Driffield', grid reference and parish protected.

Record ID: FAKL-471816
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Lead disc, now corroded, its faces bear traces of what might be incuse lettering. Broken perhaps once folded.
Created on: Tuesday 12th October 2010
Last updated: Monday 29th November 2010
Spatial data recorded. This findspot is known as 'Near Market Weighton', grid reference and parish protected.

Record ID: FAKL-44C4B7
Object type: WEIGHT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Lead weight, conical or, to be more accurate, sugar-loaf shaped. A hole (7.4 x 4.6mm) runs down its length. This is off-set from the centre. Generally rough and poorly made.
Created on: Tuesday 12th October 2010
Last updated: Monday 29th November 2010
Spatial data recorded. This findspot is known as 'Near Market Weighton', grid reference and parish protected.

Record ID: FAKL-1AE171
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Fitting made from sheet copper alloy, now distorted but originally bent around to form a U shaped loop. Ends exanded to 5.2mm wide and pointed. Through each of them is a 2.0mm diameter hole, one of which still retains a copper alloy rivet, 1.7mm diameter x 2.6mm long. At the top of the loop are three parallel, incised grooves, running for 8.5mm down its length.
Created on: Sunday 10th October 2010
Last updated: Sunday 22nd May 2011
Spatial data recorded. This findspot is known as 'Near Market Weighton', grid reference and parish protected.

Record ID: FAKL-1AB425
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Lead fragment, apparenly originally cross-shaped the arms D sectioned with expanded terminals. Only two arms survive. At the junction of the arms is a raised boss.
Created on: Sunday 10th October 2010
Last updated: Sunday 22nd May 2011
Spatial data recorded. This findspot is known as 'Near Market Weighton', grid reference and parish protected.

Record ID: FAKL-B32D83
Object type: KNIFE
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Published
Fragment of a bone handle a whittle tanged knife or fork. Section rectangular and incomplete. Edges rounded. At one end is a 4.8mm diameter blind hole which tapers out. There appear to be some signs of iron staining on the back of the handle but none within the hole.
Created on: Tuesday 5th October 2010
Last updated: Monday 29th November 2010
Spatial data recorded. This findspot is known as 'Near Driffield', grid reference and parish protected.