Back to simple search | Back to advanced search

    You searched for:

    • Broad period: ROMAN
    • Created by: Kevin Leahy
    • Show this many records per page: 100

  • Thumbnail image of FAKL-BCEB7D

Record ID: FAKL-BCEB7D
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy Roman (c. 60-150) brooch of 'Trumpet' type represented only by the loop and rosette once fixed to the head of the brooch. This consists of a 14.0mm diameter, diamond sectioned ring the ends of which taper and pass through two holes in a rectangular plate on the underside of the rosette after which they are splayed out. The rosette is circular and contains a conical central boss surrounded by radiating petals. Length 21.7mm, Width 21.1mm, Height 9.1mm, Mass 3.10g.
Created on: Friday 14th September 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8E9B24

Record ID: FAKL-8E9B24
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
Cast copper alloy Roman brooch of Polden Hill type, Mackreth 2011, Chapter 3, Part 3, CD PH 4.d., A.D 75-150. Between two vertical ridges on the upper bow is a panel of stamp impressions. The wings are separated from the bow by two raised, circular panels, the wings are semi-circular and hollow with circular plates at each end through which are holes for the axial pin. Length 55.7mm, Width 26.2mm, Height 18.6mm, Mass 14.40g.
Created on: Wednesday 12th September 2018
Last updated: Thursday 13th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8D0D18

Record ID: FAKL-8D0D18
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy Roman sestertius of Faustina II (AD 145-176) Reece Period 8, Diana issue, inscription lost on both faces, Obverse: bust of Faustina, right, Reverse: Diana advancing right with an arrow and bow flanked by S C. Coin struck under Antoninus Pius, 145-161, RIC 1383. Diameter 30.1mm, Mass 14.44g.
Created on: Wednesday 12th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-6995C5

Record ID: FAKL-6995C5
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Cast copper alloy Roman brooch of 'Trumpet' type, 1st - 2nd century date, poor condition, the foot is missing and there is much loss of its original surface, the scrolled moulding on the upper part of the bow being almost lost. The bow is decorated with a central, transverse moulding flanked by two deep grooves and two smaller mouldings. The decorative details of the lower foot are lost. On the end of the bow is a disc-like projection bearing a deep, annular groove which contains traces of what may have been enamel. The underside of the 'trumpet' is hollow to a depth of 10mm. On either…
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-694837

Record ID: FAKL-694837
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy nummus of the House of Constantine (348-364) (Reece Period 18). FEL TEMP REPARATIO, reverse depicting a soldier spearing a horseman, AD 348-353. Condition poor with much loss of the edge and obverse surface. Diameter 17.4mm, Mass 2.35g.
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-686572

Record ID: FAKL-686572
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy brooch, Roman, 1st to 2nd century, T shaped type, poor condition with much loss of surface, end of foot missing, details of bow lost, plain, tubular wings with a central recess to accomodate a self-tensioned pin. Length 18.5mm, Width 15.2mm, Height 7.8mm, Mass 2.17g.
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-151CC3

Record ID: FAKL-151CC3
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
Cast copper Roman brooch of 'T' shaped form, incomplete, the foot being missing. The bow is divided into three, longitudinal panels by two ribs. These are separated from the foot by two transverse grooves, below which are two, angled grooves. The bow is angled at the point where it meets the two wings. These are round sectioned and contain traces of iron pin (revealed by a magnet). Between the wings is a notch into which was fitted a self-tensioned pin. On the end of the head are the remains of a loop. Length 26.0mm, Width 15.8mm Height 10.2mm, Mass 3.80g.
Created on: Thursday 6th September 2018
Last updated: Thursday 6th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-14C600

Record ID: FAKL-14C600
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
Copper alloy nummus of the House of Constantine (AD 330-348) Reece Period 17. GLORIA EXCERCITVS reverse type, two soldiers with two standards, Mint of Trier, LRBC 60-62. Diameter 16.3mm, Mass 1.57g.
Created on: Thursday 6th September 2018
Last updated: Thursday 6th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-4F96E1

Record ID: FAKL-4F96E1
Object type: VESSEL
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published Find published
Roman sherd, (50-400) grey, form of vessel unknown, dark grey fabric, quartze filler, rounded black grains, density sparce. No original edges. 34.0 x 18.0mm x 5.0mm thick . Mass 4.11g.
Created on: Tuesday 11th July 2017
Last updated: Tuesday 11th July 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4F80D1

Record ID: FAKL-4F80D1
Object type: VESSEL
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published Find published
Roman sherd, (50-400) grey, form of vessel unknown, light grey fabric with a paler core, quartze filler, rounded black grains, medium density. No original edges. 32.4 x 25.5mm x 6.8mm thick, Mass 8.49g.
Created on: Tuesday 11th July 2017
Last updated: Tuesday 11th July 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4F2722

Record ID: FAKL-4F2722
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
A worn copper-alloy Roman probable duponsius of Vespasian (AD 69-79), dating to the period AD 69-79 (Reece period 4). [...] AVG, [S] C reverse type depicting uncertain standing female figure left, possibly Pax or similar. Probably mint of Lyon. cf. RIC II (2nd ed.), p.144, no. 1191 passim for similar types. Diameter: 26.3mm; Weight: 8.36g.
Created on: Tuesday 11th July 2017
Last updated: Wednesday 12th July 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4E6B35

Record ID: FAKL-4E6B35
Object type: COIN
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
A heavily worn copper-alloy Roman nummus of the House of Constantine, dating to the period AD 330-340 (Reece period 17). CONSTANTINOPOLIS reverse type depicting Victory left on prow holding shield and sceptre. Probably mint of Lyon. Diameter 16.8, Mass 0.91g
Created on: Tuesday 11th July 2017
Last updated: Thursday 13th July 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4DA937

Record ID: FAKL-4DA937
Object type: PIN
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman pin, fragment, with one surviving 5.7mm diameter terminal set above what appear to be two circumferencial mouldings separated by a narrower moulding (the details have been lost to corrosion). The shank tapers to Length 28.7mm, Width 21.8mm, Thickness 1.2mm, Mass 4.42g. It is possible that this object reprsents the remains of a penannular brooch but it is felt that its tapering form is better interpreted as a pin..
Created on: Tuesday 11th July 2017
Last updated: Tuesday 11th July 2017
Spatial data recorded.


  • Thumbnail image of FAKL-7B5E08

Record ID: FAKL-7B5E08
Object type: VESSEL
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published Find published
Roman vessel body sherd, greyware, no features or original edges. vessicular, holes representing a lost calcareous filler, grains, rounded, sparce, well sorted by with some, larger, angular grains. Mid-grey colour. Length 28.3mm, Width 18.7mm, Thickness 7.4mm, Mass 3.78g
Created on: Monday 19th June 2017
Last updated: Monday 19th June 2017
Spatial data recorded.


  • Thumbnail image of FAKL-EC06F7

Record ID: FAKL-EC06F7
Object type: VESSEL
Broad period: ROMAN
County: Rotherham
Workflow stage: Published Find published
Roman vessel body sherd, greyware, no features or original edges. quartz filler, sparce, rounded grains, well sorted by with some, larger, angular grains. Mid-grey colour. One edge recently broken. Length 16.5mm, Width 13.7mm, Thickness 7.2mm, Mass 2.45g
Created on: Monday 12th June 2017
Last updated: Monday 12th June 2017
Spatial data recorded.


  • Thumbnail image of FAKL-40B251

Record ID: FAKL-40B251
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, severly corroded, probably a nummus. Obverse: Bust left, Inscription? Reverse: ? Diameter 15.8mm, Mass 1.47g.
Created on: Sunday 4th June 2017
Last updated: Sunday 4th June 2017
Spatial data recorded.


  • Thumbnail image of FAKL-3F4479

Record ID: FAKL-3F4479
Object type: COIN
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman coin, silver denarius of Hadrian (117-138) Obverse: Laureate draped bust, right, [i] MP CAESAR TRAIAN HADRIANVS AVG. Reverse: Standing figure of Hadrian in military dress, left, holding an inverted spear in his left hand and a rudder in his right, P M T N P (sic) RIC 110 Diameter 17.9mm, Mass 2.46g.
Created on: Sunday 4th June 2017
Last updated: Sunday 4th June 2017
Spatial data recorded.


  • Thumbnail image of FAKL-3F161D

Record ID: FAKL-3F161D
Object type: BROOCH
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman headstud type brooch fragment, c. AD 100-200, consisting of the wings, head ring, headstud and part of the bow. The headstud consist of a pellet set within an annulet. The underside of the bow is hollow cast and, across the underside of the wings, is a groove for the spring. Length 20.8mm Width 13.9mm, Height 13.2mm, Mass 2.79g.
Created on: Sunday 4th June 2017
Last updated: Sunday 4th June 2017
Spatial data recorded.


  • Thumbnail image of FAKL-F04628

Record ID: FAKL-F04628
Object type: COIN
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
Roman coin, copper alloy radiate, poor condition with little surviving detail, Obverse: Radiate bust, right. Reverse: Standing male figure, left Diameter: 18.2mm, Mass 2.40g.
Created on: Friday 19th May 2017
Last updated: Friday 19th May 2017
Spatial data recorded.


  • Thumbnail image of FAKL-F015E5

Record ID: FAKL-F015E5
Object type: COIN
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
Roman coin, plated copy of a silver Denarius of Septimus Severus (AD193-211) RIC 261, Obverse: Laureate bust, right. Inscription? Reverse: Standing, draped, female figure holding a cornucopia and a caducus in her right hand. FELICIA AVGG. Chipped revealing core. Diameter: 19.4mm, Mass 1.82g.
Created on: Friday 19th May 2017
Last updated: Friday 19th May 2017
Spatial data recorded.


  • Thumbnail image of FAKL-C4CB25

Record ID: FAKL-C4CB25
Object type: PLATE BROOCH
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
Roman plate brooch, c. AD120-200. Cast copper alloy with some traces of red enamel. Disc shaped with concentric decoration consisting of a central setting within a boss. This is surrounded by a circumferencial groove which in turn is set within a band containing a row of pellets. On the edge of the plate are two D shaped projections containing ring and dot decoration. Beneath these are the pin fittings. The brooch has a thin section which has been broken through in the area of the groove. Length 37.5mm, Width 29.8mm, Thickness 3.0mm, Mass 7.57g.
Created on: Wednesday 17th May 2017
Last updated: Tuesday 8th May 2018
Spatial data recorded.


  • Thumbnail image of FAKL-C49EFE

Record ID: FAKL-C49EFE
Object type: BROOCH
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
Roman brooch of Headstud type, AD100-200. trapezoid sectioned bow with a groove down its length, cylindrical terminal with a circumferential triple moulding and a recessed face containing a central boss. . Oval headstud also containing a central boss. Below this is a rectangular lug. Wings marked by transverse grooves, through them runs a longitudinal bar that secured the hinged pin (missing). The brooch has undergone some recent damage. Length 40.0mm, Width 20.4mm, Height 18.3mm, Mass 11.09g.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 17th May 2017
Spatial data recorded.


  • Thumbnail image of FAKL-C15804

Record ID: FAKL-C15804
Object type: COIN
Broad period: ROMAN
County: Rotherham
Workflow stage: Published Find published
Roman coin, copper alloy Sestertius of Faustina Junior (AD146-175). Reece Period 8. Obverse: female bust right, hair in a bun, FAVSTINA AVG [ ]. Reverse: standing draped female figure left, holding a torch, Vesta? [consecratio?] S - [c]. Diameter 30.7mm, Mass 19.38g.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 17th May 2017
Spatial data recorded.


  • Thumbnail image of FAKL-9CD6AA

Record ID: FAKL-9CD6AA
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Roman cast copper alloy Colchester derivative, rear spring hook brooch of Mackreth, 2011, Chapter 2, Part 2 Group 1.b., 60-63, Plate 38 of first century AD. Bow D sectioned and decorated with a longitudinal groove containing a stamped, chain like line. The catch plate is missing as is one wing of the head bar and the pin and spring mechanism. The underside of the head bar is hollow to hold the pin spring. Length 45.5mm, Width 19.4mm, Height 12.8mm, Mass 7.05g.
Created on: Monday 15th May 2017
Last updated: Tuesday 27th March 2018
Spatial data recorded.


  • Thumbnail image of FAKL-35E90A

Record ID: FAKL-35E90A
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
Roman coin, sestertius of Antoninus Pius (138-161), condition poor and worn with much loss of detail. Obverse: Laureate bust, right. Reverse: standing female figure, left, right arm raised. Diameter 29.5mm, Mass 18.08g.
Created on: Friday 28th April 2017
Last updated: Friday 28th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-21BB7A

Record ID: FAKL-21BB7A
Object type: FIGURINE
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman (probably) lead figurine, perhaps of Priapus, now heavily worn with only the broadest details visible. The figure is flat backed and appears to be on an integral plate which extends beyond the it sides. The head is rounded and smooth, the legs are shown, the right one perhaps slightly advancing. It is difficult to see details of the arms but they appear folded. Length 38.5, Width 12.4mm, Thickness 7.0mm, Mass 20.51g. Figures like this are difficult to date but this object resembles a series of flat backed figures of Priapus (LEIC-C96B33; SWYOR-A153A2; LVPL-D9A6B5 and WAW-B5A6B8)…
Created on: Thursday 27th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-20CB45

Record ID: FAKL-20CB45
Object type: FIGURINE
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman lead figurine of Priapus, this is carefully modelled in three dimensions which is unusual for a lead Priapus as other examples, (LEIC-C96B33; SWYOR-A153A2; LVPL-D9A6B5 and WAW-B5A6B8) have flat backs.On this example the back, buttocks and thighs are accurately shown. Little of the face survives and the phallus is truncated, this may be due to use: a copper alloy priapic figure is known on which these features are worn, probably by touching as a safeguard against the evil eye. The arms are folded across the upper abdomen and do not reach down to the phallus as on other examples. …
Created on: Thursday 27th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-0C5964

Record ID: FAKL-0C5964
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, corroded with much loss of detail but probably a nummus of the House of Valentinian (AD350-353) Obverse: bust, right, inscription lost, Reverse: standing figure, left, 'victoria avggg?'. Reece Period 18, AD 388-395, Diameter 11.5mm Mass 0.57g
Created on: Wednesday 26th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-0C0ED8

Record ID: FAKL-0C0ED8
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, corroded with much loss of detail but probably a Miliarensis of Magnentius (AD350-353) Obverse: draped, bear headed bust, right, inscription lost, Reverse: Chi-rho Christogram, inscription lost but probably 'salus dd.nn. avg et caes'. Reece Period 18, Diameter 27.2mm Mass 6.87g
Created on: Wednesday 26th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-0A672A

Record ID: FAKL-0A672A
Object type: COIN
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
Roman coin, corroded with the loss of all detail, either a radiate or a nummus, iregular shape, Diameter 20.3mm, Mass 3.23g.
Created on: Wednesday 26th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4D38D2

Record ID: FAKL-4D38D2
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, a nummus of the House of Constantine, heavily corroded with some loss of surface, Obverse: helmeted bust, right, Reverse: Globe on altar, [ beata tra] NQVILITAS Reece 16, AD321-323. Diameter 19.5mm, Mass 1.58g.
Created on: Monday 17th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4D0E02

Record ID: FAKL-4D0E02
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
Roman coin, a nummus, heavily corroded with much loss of surface, Obverse: bust, right, Reverse: Altar? beata tranquilitas? Reece 16, AD321. Diameter 16.9mm, Mass 0.94g.
Created on: Monday 17th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4CEA82

Record ID: FAKL-4CEA82
Object type: COIN
Broad period: ROMAN
County: Rotherham
Workflow stage: Published Find published
Roman coin, a nummus, heavily corroded with much loss of surface, Obverse: bust, right, AD300-400. Diameter 12.2mm, Mass 0.72g.
Created on: Monday 17th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4CD13A

Record ID: FAKL-4CD13A
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, a nummus of the House of Valentinian, fragment, corroded with much loss of surface, Obverse: bust, right, Reverse: standing draped female figure advancing left, holding a cornucopia in left arm, raising right arm. probably 'securitas rei publicae' Reece 19, AD364-378. Diameter 16.2mm, Mass 0.69g.
Created on: Monday 17th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4CA7C2

Record ID: FAKL-4CA7C2
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, corroded with much loss of surface but indications of a helmeted bust, right, suggest that it was a nummus of 'Urbs Roma' or 'Constantinopolis' type. Reece 17, AD330-340. Diameter 12.6mm, Mass 0.70g.
Created on: Monday 17th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4C3721

Record ID: FAKL-4C3721
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, corroded with a complete loss of surface but indications of a bust suggest that it was a nummus. Diameter 14.0mm, Mass 0.76g.
Created on: Monday 17th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-4C12DD

Record ID: FAKL-4C12DD
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, nummus of the House of Constantine, corroded, very poor condition but probably: Constantius II or Constans, Obverse: bust, right, Reverse: two facing Victories facing, 'victoriae dd avgg q nn' Diameter 13.7mm, Mass 1.21g.
Created on: Monday 17th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded.


  • Thumbnail image of FAKL-B9B6ED

Record ID: FAKL-B9B6ED
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published Find published
Roman coin, heavily corroded but probably a nummus. Diameter 15.6mm, Mass 1.29g.
Created on: Wednesday 29th March 2017
Last updated: Thursday 7th September 2017
Spatial data recorded.


  • Thumbnail image of FAKL-A9C9C5

Record ID: FAKL-A9C9C5
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman copper alloy coin, heavily worn and incomplete, a Q-Radiate of Allectus (AD 293-296) (Reece Period 14). Obverse: [ ... ], radiate bust right, Reverse: [VIRTVS AVG?], unclear galley. Mint unclear. Diameter 19.2mm, Mass 1.33g. This coin has been considered for Sam Moorhead's corpus for RIC.
Created on: Thursday 16th March 2017
Last updated: Friday 11th August 2017
Spatial data recorded.


  • Thumbnail image of FAKL-88C183

Record ID: FAKL-88C183
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Leeds
Workflow stage: Published Find published
Roman steel yard weight, cast lead, biconical. On its top, traces of iron corrosion products represent its iron loop, there is a small, pointed projection at its base which failed to respond to a magnet. Weights of this form are usually dated to the Roman period. Diameter: 31.3mm, Height 44.0mm, Mass 116.10g
Created on: Monday 6th February 2017
Last updated: Tuesday 7th February 2017
Spatial data recorded.


  • Thumbnail image of FAKL-6277B2

Record ID: FAKL-6277B2
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
Roman silver denarius of Trajan (98-117) RIC 361, AD 114-117. Obverse: Laureate bust, right, [imp caes] NER TRAIAN OTIMO AVG DAC [dac]. Reverse: Providentia with a globe at her feet, PARTHICO PM TR.P COS VI [PSPQR]; PRO-VID separated by the figure. Diameter 17.4mm, Mass 3.00g.
Created on: Monday 23rd January 2017
Last updated: Monday 23rd January 2017
Spatial data recorded.


  • Thumbnail image of FAKL-5F5B81

Record ID: FAKL-5F5B81
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
Roman brooch of 'Headstud' type. The foot is missing but sufficient survives to show that this was a fine brooch. Part of the bow is present and, on its underside, is the end of the catch plate. Down the top of the bow runs a broad groove. At the apex of the bow is a circular rosette-like element, its outer edge marked by a ring of radial notches. In the centre of this is a small setting containing blue enamel. This is surrounded by an annular groove which may also have contained enamel. On each wing of the head are two panels of blue enamel inlay and, while the details of lost, these…
Created on: Monday 23rd January 2017
Last updated: Monday 23rd January 2017
Spatial data recorded.


  • Thumbnail image of FAKL-C54608

Record ID: FAKL-C54608
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published Find published
Roman coin, silver denarius of Geta (198-209). Obverse: draped bust, right PSEPT GETA CAES PONT. Reverse: Geta standing, left holding a spears, to his right a stand of arms, PRIN [C IVVE] NTVTIS. (RIC IV, 106), Diameter 18.2mm, Mass 2.61g.
Created on: Monday 28th November 2016
Last updated: Thursday 7th September 2017
Spatial data recorded.


  • Thumbnail image of FAKL-C42EFE

Record ID: FAKL-C42EFE
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published Find published
Roman coin, a nummus of the House of Valentinian, very poor condition. Obverse: pearl diademed bust, right, inscription lost. Reverse: Victory, advancing left, holding a wreath, 'securitas rei publicae' type, AD 364-378, Reece Period 19. Diameter 17.5mm, Mass 1.99g.
Created on: Monday 28th November 2016
Last updated: Thursday 7th September 2017
Spatial data recorded.


  • Thumbnail image of FAKL-07374E

Record ID: FAKL-07374E
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, nummus of fourth century date. Poor condition, fragment but enough survives of the obverse to show the coin to have been a nummus and traces on the reverse suggest that it is of the 'two soldiers and two standards' type, "gloria exercitus", House of Constantine, AD330-225, Reece 17. Diameter 15.9mm, Mass 0.76g.
Created on: Saturday 19th November 2016
Last updated: Saturday 19th November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-07118E

Record ID: FAKL-07118E
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, nummus of fourth century date. Little detail survives but the faint outline of the bust shows the coin to have been a nummus rather than a radiate. Diameter 17.0mm, Mass 1.22g.
Created on: Saturday 19th November 2016
Last updated: Saturday 19th November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0677F6

Record ID: FAKL-0677F6
Object type: BROOCH
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman brooch fragment, too little surviving to allow classificaton but its pointed end would be appropriate for a number of first and second century Colchester derivative types. On the underside of the fragment is the catch plate which has been bent flat. The fragment has a flat, keel-shaped section the start of the bow being marked by two transverse mouldings flanking a larger moulding. Length 26.0mm, Width 9.1mm, Thickness 3.1mm, Mass 2.41g.
Created on: Saturday 19th November 2016
Last updated: Saturday 19th November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-F0A125

Record ID: FAKL-F0A125
Object type: COIN
Broad period: ROMAN
County: Leeds
Workflow stage: Published Find published
Roman coin, silver denarius of Trajan (AD98-117). Obverse: Laureate bust right, TRAIANO OPTIMO AVG [ ]. Reverse: Standing female figure, left, draped and holding a cornucopia in left arm, right arm raised and holding an object the details of which are lost to wear. [cos?] VI PP SPQR. Diameter 18.5mm, Mass 2.01g
Created on: Friday 18th November 2016
Last updated: Saturday 19th November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-096C4A

Record ID: FAKL-096C4A
Object type: VESSEL
Broad period: ROMAN
County: Rotherham
Workflow stage: Published Find published
Roman sherds (3) Sherd A represents part of the body and the rim of a flanged bowl, of the type used c. 230-360. The vessel had straight, expanding, sides with a sharply projecting flange above which is a small, vertical bead. There are indications of crossing, incised lines on the exteriour. Colour light grey throughout. Thickness 6.0mm, Mass 20.21g. Sherd B, plain body sherd, pale grey exterior, white core. Thickness 8.0mm, Mass 16.20g Sherd C, plan body shere, dark grey throughout. Thicknsess 8.0mm, Mass 10,46g All three fabrics are otherwise as: Fabric: Colour: as…
Created on: Monday 7th November 2016
Last updated: Wednesday 9th November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-CD0934

Record ID: FAKL-CD0934
Object type: BRACELET
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Published Find published
Roman bracelet fragment (probably). Copper alloy with three longitudinal grooves running down its length. These are flanked by two narrower groves, all of the grooves contain fine tooling marks. The fragment is flat, not curved but is sufficiently like WILT-4FA360 to suggest that it was part of a bracelet. Length 33.4mm, Width 17.0, Thickness 1.2mm, Mass 2.71
Created on: Friday 4th November 2016
Last updated: Wednesday 9th November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-8CB9CC

Record ID: FAKL-8CB9CC
Object type: BROOCH
Broad period: ROMAN
County: Leeds
Workflow stage: Published Find published
Roman brooch of 'trumpet' type, first-second century. Cast copper alloy, foot missing, The bow has a D shaped section with multiple mouldings around its mid point. These consist of a central, semi-circular, transverse disc, flanked, on each side, by three conical projections. beyond these are broad, transverse grooves and two incised lines. The bow expands to form the eponymous 'trumpet' on the underside of which is an integarally cast loop by which the spring was attached. Length 34mm, Width 12.6mm, Height (crushed 8.4mm, Mass 3.65g.
Created on: Tuesday 1st November 2016
Last updated: Wednesday 9th November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-315129

Record ID: FAKL-315129
Object type: VESSEL
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman folded beaker body sherd, terracotta colour, sides deeply indented, band of finely incised vertical lines around body. Rilling marks left by throwing cover the interiour. Diameter of vessel cannot be determined, Height 57mm, Width 44mm Thickness 2.2mm, Mass 6.36g Fabric: Colour: terracotta surfaces, pink core. Hard fired fabric, Inclusions: black mineral, sparse density, grain size >0.2mm, sub angular, well sorted. Shaping: wheel thrown, no surface treatment,, sherd appears unabraded. Form: Folded beaker body sherd.
Created on: Friday 28th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-1CBB08

Record ID: FAKL-1CBB08
Object type: VESSEL
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman mortarium rim fragment, off-white fabric possibly with a light brown slip applied to its exterior. White quartz grits, > 2.5mm on interior of bowl. Heavy down turned rim with a pronounced internal beading. Diameter of vessel 380mm, Height 44mm, Thickness (bowl) 10mm, Mass 190.16g Fabric: Colour: off white throughout. Hard fired fabric, Inclusions: black mineral, medium density, grain size >0.5mm, sub angular, well sorted. Shaping: wheel thrown, Light brown slip on exterior, white grits applied to inside of bowl, sherd appears unabraded. Form: Mortarium rim sherd.
Created on: Thursday 27th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-1C592D

Record ID: FAKL-1C592D
Object type: VESSEL
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Knob from a vessel, top in the form of a flat topped cone below which is a narrowed waist. The underside of the cone is hollowed. Date and function uncertain. Diameter 38mm, Height 24mm Thickness (section) 5mm, Mass 28.13g Fabric: Colour: terracotta coloured throughout. Hard fired fabric, Inclusions mixed dark coloured minerals: sparce density, grain size >0.3mm, angular, well sorted. Shaping: wheel thrown? No surface treatment, sherd appears abraded. Form: handle knob?
Created on: Thursday 27th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-1BD10B

Record ID: FAKL-1BD10B
Object type: VESSEL
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman face jar fragment, fine, well made fabric, and apparently representing the forehead and hair, the latter represented by raised areas contining pellets set within a double rings. Finger marks on the reverse show the raising of the curls. An eyebrow is suggested by two grooves. The vessel appears to have had a diameter of around 270mm. Width 91mm, Length 74mm, Thickness 5mm, Mass 34.28g. Fabric: Colour: surfaces terracotta coloured, core: light grey. Hard fired fabric, Inclusions quartz: medium density, grain size >0.2mm, rounded, well sorted. Shaping: hand made, modelled de…
Created on: Thursday 27th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0A5CEC

Record ID: FAKL-0A5CEC
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman coin, radiate of Victorinus, AD 269-271, Obverse: Radiate head, right, VICTORINVS PF AVG: Reverse. Standing figure of Sol with right arm raised, star under arm, IN [victut] VS. Cunetio 2534. Diameter 20.40mm, Mass 1.95g
Created on: Wednesday 26th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0A3100

Record ID: FAKL-0A3100
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman coin, barbarous radiate possibly based on Tetricus II, AD 272-274, Obverse: Radiate head, right, inscripion unclear: Reverse. Sacrificial implements, Diameter 18.0mm, Mass 2.77g
Created on: Wednesday 26th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-09854A

Record ID: FAKL-09854A
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman coin, barbarous radiate, Obverse: Radiate head, right, ]PIR [... Reverse: Standing female figure, advancing left, holding a cornucopia and scales, ] ETA [ (Aequitas Avg?) AD 275-285, Diameter 20.7mm, Mass 3.68g
Created on: Wednesday 26th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0915A1

Record ID: FAKL-0915A1
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman coin, nummus of the House of Constantine, Obverse: laureate, cuirassed, bust, right, CONSTANTINVS [ ] Reverse: Two soldiers with one standard, GLORIA EXERC [itvs], mint mark TRP. AD 335-341, Diameter 15.3mm, Mass 1.17g
Created on: Wednesday 26th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-08DD0E

Record ID: FAKL-08DD0E
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman coin, nummus of the House of Constantine, Obverse: laureate bust, right, consa ] NTI [in ? Reverse: Two soldiers with one standard, GLORIA EXERCITVS, mint mark uncertain. AD 335-341, Diameter 15.0mm, Mass 1.52g
Created on: Wednesday 26th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-08AAE7

Record ID: FAKL-08AAE7
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman coin, barbarous radiate, Obverse: radiate head, right, inscription lost, Reverse:seated? female figure, left, draped, right hand raised. ]HE [ AD 275-285, Diameter 15.4mm, Mass 1.05g
Created on: Wednesday 26th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0816F2

Record ID: FAKL-0816F2
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published Find published
Roman coin, barbarous radiate, Obverse: radiate head, right, inscription lost, Reverse: standing female figure, left, draped, holding a staff (?). SPE [ec] AVG, star and ringed dot in to left and right of figure, AD 275-285, Diameter 15.0mm, Mass 1.70g
Created on: Wednesday 26th October 2016
Last updated: Wednesday 2nd November 2016
Spatial data recorded.


  • Thumbnail image of FAKL-4B2935

Record ID: FAKL-4B2935
Object type: BROOCH
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman brooch of 'Knee (varient)' type, the catch plate is missing and is represented by a transverse scar running across the width of the brooch suggesting that it had the transverse form seen on the example illustrated by Hattatt, Fig. 195. The terminal is marked by an expanded, half-round moulding from which the bow expand towards the head, around it is a circumferential groove. Close to the end of the brooch its profile changes from curved to straight. On the underside of the brooch is a cast loop linking the foot to the bow, on the end of the head is a projecting ring. The expande…
Created on: Monday 17th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-4AACE9

Record ID: FAKL-4AACE9
Object type: BROOCH
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman brooch of 'T shaped' type, small, up turned projection on foot, the bow has a rectangular section tapering towards the foot. Down its length runs a central groove flanked by two smaller grooves. The head appears to have been formed from a flat plate, rolled to form a tube, part of a seam is visible. On each side of the head are two transverse grooves. First-second century AD. Length 35.17mm, Width 22.6mm, Height 13.4mm, Mass 6.11g.
Created on: Monday 17th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-4A8004

Record ID: FAKL-4A8004
Object type: BROOCH
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman brooch of 'Trumpet' type, cast copper alloy, corroded with loss of its original surface. Foot missing. The lower part of the bow has a trianguar section, the top of the bow bears an expanded moulding consisting of a central disc either side of which are three lug-like projections.Flanking the disc are two transverse mouldings. The bow expands into the eponymous 'trumpet' marking the head. On the underside of this is an intregrally cast ring by which the pin was secured. Length 29.7mm, Width 13.9mm, Height 17.8mm, Mass 6.14g.
Created on: Monday 17th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-4A3F35

Record ID: FAKL-4A3F35
Object type: BROOCH
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman brooch of 'Trumpet' type, cast copper alloy, corroded with loss of its original surface. Cylindrical boss on its foot, marked by a circumferential groove. The lower part of the bow has a trianguar section, the top of the bow bears an expanded moulding bearing two rings of projects around its circumference. This moulding is flanked by two smaller mouldings made up of two circumferential bands each bearing a central groove The bow expands into the eponymous 'trumpet' marking the head. On the underside of this is an intregrally cast ring by which the pin was secured. The head is no…
Created on: Monday 17th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-3A0AC6

Record ID: FAKL-3A0AC6
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Roman coin, radiate of Gallienus (253-268, poor condition, inscription lost. Obverse: Radiate bust, right, Reverse: Standing female figure, left, draped, with a cloak trailing behind her, she is holding an object in her right hand, there may be an X in the field behind her. Some traces of slivering survive on the reverse. Diameter 17.1mm, Mass 1.99g.
Created on: Sunday 16th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-10941A

Record ID: FAKL-10941A
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Wakefield
Workflow stage: Published Find published
Fragment of cast copper alloy, leaf shaped and bearing deeply incised lines. These from a central groove across which are three, curved, transverse grooves. At one end is a 3.0mm diameter hole which appears to be slightly countersunk on its upper face. On the underside of the object the hole is surrounded by a burr left by drilling. The object has a flattened D shaped section. At one end is a rounded finial, separated from the main part of the object by a transverse groove. At the other end of the object is what might be a highly stylised animal's head, a diamond shaped area with a ce…
Created on: Friday 14th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-10507E

Record ID: FAKL-10507E
Object type: BROOCH
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Roman brooch of 'Trumpet' type, foot missing, detail lost to corrosion, Central moulding on bow apparently consisting of a ring of pellets flanked by two transverse mouldings and circumferential grooves. The head expands into the eponymous trumpet shape below which is an integrally cast ring which secured the spring mechanism. First-second century AD. Length 35.7mm, Width 11.9mm, Height 16.7mm, Mass 8.72g.
Created on: Friday 14th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0FA68B

Record ID: FAKL-0FA68B
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Barnsley
Workflow stage: Published Find published
Sheet copper alloy strip, tapering slightly along its length, decorated with a pattern of small repouse bosses, the design consists of a central line of bosses flanked by bosses making up triangles While the two fragment do not joint it is likely that they formed part of the same strip. The broader end of the strip is, transversly, slightly curved. This object is clearly of some antiquity but its date and function are unknown. Patterns of raised bosses are used on Roman votive plates but also appear on Early Anglo-Saxon bucket mounts. Associations on the site suggest a Roman date. Len…
Created on: Friday 14th October 2016
Last updated: Monday 17th October 2016
Spatial data recorded.


  • Thumbnail image of FAKL-15C418

Record ID: FAKL-15C418
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch, probably of 'trumpet' type but only part of the head survives. Cast copper alloy and fitted with a hinged pin. The head expands in trumpet style but is truncated at a transverse moulding. A scar across the end of the expanded end may represent the loop commonly seen on trumpet brooches. Length 17.8mm, Width 13.0mm, Thickness 6.6mm, Mass 3.30g. .
Created on: Wednesday 15th June 2016
Last updated: Wednesday 15th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-12408B

Record ID: FAKL-12408B
Object type: FINGER RING
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman finger ring of Henig Type XIII, incomplete, most of the hoop missing, its section cannot be determined. The bezel is oval but contains a 6.0mm diameter setting, now empty. Either side of the bezel is a small moulding and a transverse groove. Henig Type XIII rings are dated to the third century. Length 21.3mm, Width (bezel) 7.6mm, Mass 1.53g.
Created on: Wednesday 15th June 2016
Last updated: Wednesday 15th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-01FE22

Record ID: FAKL-01FE22
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of T shaped type, foot and much of the bow missing, cast copper alloy, hinge type pin mechanism, the pin is missing but, unusually for a Roman brooch, it was made of iron, its stump reacting to a magnet. The wings of the head are decorated with deep transverse grooves. Length 21.0mm, Width 22.0mm, Height 13.0mm, Mass 7.50g.
Created on: Tuesday 14th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-015A58

Record ID: FAKL-015A58
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman, or Iron Age penannular brooch fragment, ring round sectioned, tapering from 3.7mm to 2.4mm diameter with an oblate, 7.5 x 6.2mm. Beneath the head is single, transverse moulding. These brooches are difficult to date and this find could date from Iron Age to the Roman period. Diameter c. 37.8mm, Mass 3.81g.
Created on: Tuesday 14th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-00F5B7

Record ID: FAKL-00F5B7
Object type: FINGER RING
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman finger ring made from a strip of sheet copper alloy rolled around to form a cylinder, jointed at one point but the joint has now opened. The decoration is incised and consist of two circumferential grooves, one down each side. Between them are two rows of crescentic marks, probably executed with a curved ended chisel. The pattern is interruped by a circular mark, made by conjoined crescents, on each side of this is a row of single crescents, four on one side and three on the other. It has been suggested that finger rings like this were made from re-used bracelets but this is fel…
Created on: Tuesday 14th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-00A60C

Record ID: FAKL-00A60C
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of headstud type, cast copper alloy with some traces of red enamel. The foot of the brooch is missing but the remaining part of the bow bears a latice pattern of diamond shaped and triangular champleve cells containing traces of red enamel. On the crest of the head is a circular stud on which is a smaller, central boss. The pin mechanism was of the self-tensioned, hinged type. On the end of the head is the remains of an integrally cast ring. Length 23.0mm, Width 15.3mm, Height 13.4mm, Mass 5.75g.
Created on: Tuesday 14th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-FE98D9

Record ID: FAKL-FE98D9
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of plate type, circular with a central boss surrounded by a recessed area and two circumferential mouldings. The brooch is in poor condition and encrusted/earth covered making it impossible to see the surface. On the back is a perforated lug for the attachment of the pin and a catch plate. Diameter 26.7mm, Height 6.2mm, Thickness 2.8mm, Mass 7.58g.
Created on: Tuesday 14th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-FDFB14

Record ID: FAKL-FDFB14
Object type: NAIL CLEANER
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman finger nail cleaner, a varient of Crummy's Type 2a, Copper alloy, surmounted by a ring, worn through and in the same plane as the cleaner. Beneath the ring are two rounded indents giving the cleaner a waisted appearance. The lower part of the cleaner tapers, a groove down its length reflecting the now missing bifurcation. Length 38.7mm, Width 9.4mm, Thickness 1.9mm, Mass 1.18g.
Created on: Tuesday 14th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-FDB195

Record ID: FAKL-FDB195
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of 'headstud type. Cast copper alloy, incomplete and damaged, the setting within the headstud is missing, the foot bent. The bow has a tapering, oval section beneath which are traces of the catch plate. In front of the headstud socket is a small projection. The pin mechanism was of hinged type. Length 25.7mm, Width 18.0mm, Height 10.9mm, Mass 4.44g
Created on: Tuesday 14th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-ED29D6

Record ID: FAKL-ED29D6
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of 'bow and fantail' type. Cast copper alloy with enamel inlay, traces of tinning/silvering on the head. The foot is expanded to form the 'fan' its surface inlaid with three triangular panels containing red champleve enamel. These are surrounded by a band of 'rocked tracer' decoration. The bow has a square section, 4.1 x 3.4mm with two longitudinal grooves down its length. The wings on the head are cylindrical with narrow plate extending across its end. Attached to this plate is an integrally cast terminal loop. The pin is of hinged type and survives as does the catch pla…
Created on: Monday 13th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-ECDA54

Record ID: FAKL-ECDA54
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of 'trumpet' type. Cast copper alloy poorly preserved but pin present. The foot terminates in a transverse disc around which are two, circumferential grooves. On its underside is a triangular catch plate. The bow has a keeled, triangular section up to its mid-point where it meets the elaborate mouldings consisting a transverse disc set between petal-like projections spreading from the bow. This is flanked by pairs of plain, transverse mouldings. The upper part of the bow has a circular section expanding to form the eponymous 'trumpet' on the brooch's head. The brooch pin …
Created on: Monday 13th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-EC386D

Record ID: FAKL-EC386D
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of Hod Hill type, cast copper alloy with a tinned surface. Bow straight, tapering down its length and bearing two, longitudinal grooves. On the catch plate are two openings: both circular but the larger has a triangular notch on one side. There are two transverse beak-like projections on the head below which is the fitting for a hinge-type pin mechanism. Length 63.6mm, Width 17.0mm, Height 15.3mm, Mass 6.91g.
Created on: Monday 13th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-EB1B16

Record ID: FAKL-EB1B16
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman trumpet type brooch, fragment representing the distorted head of the brooch, the round sectioned bow broken and distorted. The head is oval and beneath it is a cylindrica fitting in the centre of which is the notch for the missing pin. No surface decoration. Length 19.6mm, Width 22.8mm, Height 13.7mm, Mass 8.85g.
Created on: Monday 13th June 2016
Last updated: Tuesday 14th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-EAC37B

Record ID: FAKL-EAC37B
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman plate brooch, cast copper alloy, very poorly preserved with much loss of the stone settings and all of the surface. Oval with a central oval setting. There are indications of concentric stamp marks around this setting. On the back are the remains of the pin mount and catch plate. Length 37.2mm, Width 25.7mm, Height 3.2mm, Thickness 2.0mm, Mass 9.32g.
Created on: Monday 13th June 2016
Last updated: Wednesday 19th July 2017
Spatial data recorded.


  • Thumbnail image of FAKL-D862C2

Record ID: FAKL-D862C2
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of Headstud type, cast copper, the eponymous is lost, leaving a hole. The tip of the foot is missing and it appears that work has been carried out on the catch plate, one side of which bears a 4.0mm wide band of dark material, probably solder. The other side of the catch plate bears traces on incised decoration: two horizontal lines linked by angled lines above which is a curving line. The bow has a square section sweeping down to a hollow, cylindrical head, in the centre of which are the remains of a hinge-type pin mechanism. At each end of the cylinder is a projection, …
Created on: Sunday 12th June 2016
Last updated: Sunday 12th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-D82829

Record ID: FAKL-D82829
Object type: VOTIVE MODEL
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman lead votive model axe, now damaged. Blade flaring, butt originally perforated with a 2.0mm diameter hole in the plane of the blade, now broken. Other lead votive axes have been found; cf. FAKL-B0C080. Length 14.9mm, Width (blade) 7.4mm, (shafthole) 5.2mm, Thickness 3.5mm, Mass 1.56g.
Created on: Sunday 12th June 2016
Last updated: Sunday 12th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-AC879D

Record ID: FAKL-AC879D
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman, or Iron Age penannular brooch, ring round sectioned, 2.0mm diameter with expanded oblate, 4.2mm diameter, terminals which bear incised radial lines. Pin missing. These brooches are difficult to date and this find could date from Iron Age to the Roman period. Diameter c. 24.2mm, Mass 2.45g.
Created on: Friday 10th June 2016
Last updated: Friday 10th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-A92677

Record ID: FAKL-A92677
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of Headstud type, cast copper allow with traces of enamel and silver wire inlay. The foot terminal is cupped, its hollow interior stepped and extending through the section. Within the cup are traces of what appears to be blue enamel. The outer face of the cup is marked by a line of incised arches. Between the cup terminal and the bow is a circumferential groove and a line of twisted silver wire. The bow has an oval section with a flat upper face which appears darker than the rest of the surface suggesting localised plating of some sort. This is flanked by two longitudinal…
Created on: Friday 10th June 2016
Last updated: Friday 10th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-9955D3

Record ID: FAKL-9955D3
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman brooch of Headstud type, corroded with much loss of surface. The foot terminates in a disc-like moulding separated from the bow by a series of circumferential grooves (the details of which are lost to corrosion). The bow has a 'D' shaped section the top of which is decorated with a series of incised notches, giving a herring-bone effect. On the head of the bow is the eponymous headstud, which is cylindrical with a small, central hollow. There is a ring on the end of the brooch's head: this appears to be heavily worn or corroded. Head is cylindrical with a central notch into whic…
Created on: Thursday 9th June 2016
Last updated: Friday 10th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-987600

Record ID: FAKL-987600
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
Roman brooch, copper alloy, of Fantail type, complete with pin. The fantail foot bears chapleve enamel, a 'D' shaped panel containing two confronted scrolls, surrounded by mid-blue enamel, above this is a diamond shaped panel. Two longitudinal grooves run down the bow. The head is cylindrical with a transverse projecting bar across its end on which is an integral ring. The pin is articulated with a hinge type mechanism. On the underside of the foot plate is a triangular catch plate. Length 40.2mm, Width (fantail) 18.7mm, (head) 15.8mm, Height 14.5mm, Mass 7.82g.
Created on: Thursday 9th June 2016
Last updated: Friday 10th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-052646

Record ID: FAKL-052646
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, Sestertius, probably of Antoninus Pius (AD138-161). Much detail and the lettering lost ot wear and corrosion. Obverse: Laureate bust, right. Reverse: Standing, draped female figure, right arm raised, to her sides: S C. Diameter: 30.4mm, Mass 19.14g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-04FB7A

Record ID: FAKL-04FB7A
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, Radiate or Nummus (AD260-410) very worn and corroded making identification impossible. All detail and lettering lost. Diameter: 15.0mm, Mass 1.46g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-04E2D5

Record ID: FAKL-04E2D5
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, Radiate, (AD260-285) very worn and impossible to identify. Obverse: Radiate bust, right. Reverse: Standing figure. Diameter: 17.1mm, Mass 1.35g
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-046F73

Record ID: FAKL-046F73
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, barbarous Radiate (AD275-285), appears blundered and unclear. Obverse: Traces of a radiate head. Reverse: Stick-like figure, apparently advancing left. Diameter 17.8mm, Mass 3.32g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0440AB

Record ID: FAKL-0440AB
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, copy of a Nummus of the House of Constantine (AD310-316). Obverse: Imperial bust, helmeted, cuirassed with a spear over shoulder, inscription blundered. Reverse: Mars leaning on a shield and holding a spear, [marti conservatori]. Diameter 15.8mm, Mass 1.48g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-03FE0B

Record ID: FAKL-03FE0B
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, Nummus of the House of Constantine (AD330-335). Obverse: Imperial bust, all detail and lettering lost to corrosion. Reverse: Two soldiers with two standards. [gloria exercitus]. Diameter 16.6mm, Mass 1.35g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-039F08

Record ID: FAKL-039F08
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, Nummus of the House of Theodosius (AD 388-402). Obverse: Imperial bust, diademed, right, very small. [ ] IVS PF AVG . Reverse: Victory dragging a captive, chi-rho to the left. SALVS REI [publicae]. Mint mark CONS. Diameter 13.0mm, Mass 1.09g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-0366DB

Record ID: FAKL-0366DB
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, Nummus of the House of Valentinian (AD 364-378) worn condition. Obverse: Imperial bust, diademed, right, inscription? . Reverse:Emperor dragging a captive? gl] ORI [a romanorum]. Diameter 13.3mm, Mass 0.69g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-033792

Record ID: FAKL-033792
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
Roman coin, Nummus of Magnentius (AD350-353) very worn, its small size suggesting that it might be a contemporary copy. Obverse: Imperial bust, right. Reverse: Large Chi-Rho symbol. All lettering lost. Diameter 25.0mm, Mass 4.24g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
Spatial data recorded.


  • Thumbnail image of FAKL-030185

Record ID: FAKL-030185
Object type: COIN
Broad period: ROMAN
Workflow stage: Published Find published
Roman coin, Radiate of Victorinus (AD 269-271). Obverse: Radiate bust, right IMP C VIC [torinus]. Reverse: Standing figure, right, ] A [. Diameter 17.5, Mass 2.88g.
Created on: Thursday 2nd June 2016
Last updated: Saturday 4th June 2016
No spatial data available.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 649
Search server index: valhalla

You are viewing records: 1 - 100.

Search statistics

  • Total quantity: 651
  • Mean quantity: 1.003
  • Maximum: 3

Filter your search

1 - 100 of 649 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.