Record ID: SOM-4AC795
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Roman zoomorphic plate brooch in the shape of a rabbit shown in profile. The rabbit is depicted seated with compact, rounded body and proportionally small head. The fore and hind paws seem to be truncated, but would not have been that prominent to judge from comparanda. The eye is formed of a punch and a small ear extends behind the head. The body is corroded and pitted; it is pitting that seems visible rather than recesses for enamel found on similar brooches. The lower surface features a broken and abraded double pin lug at the centre of the rabbit's rear, and a a…
Created on: Friday 9th August 2013
Last updated: Wednesday 4th September 2013
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-8C84C7
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A Roman copper-alloy lower part of the bow and catch-plate of a brooch. The upper part of the bow, the head of the brooch and pin are missing due to an old patinated break. In cross-section, the bow is rectangular with rounded corners; it generally has flat upper and lower surfaces. The bow is elongated trapezoidal and tapers gradually from the point of the break (W.: 5.9mm) to a width of 3.5mm at the foot. The foot is simply squared off and decorated with two transversely incised grooves; the leg above is plain. On the lower surface the solid catch-plate survives well. It is broa…
Created on: Monday 12th August 2013
Last updated: Monday 12th August 2013
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-21B4C2
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Roman probable initial T-shaped brooch, incomplete in so far as it is missing its pin (later 1st-century AD). The brooch survives well, only having suffered some post-depositional abrasions and slight pitting. The head has tubular wings, flattened slightly on their upper surface. They are apparently plain. The axis bar is largely obscured by the wings, but is can be said to have been made from iron judging by orange corrosion product both at the wing terminals and within the pin slot. The hinged pin is missing. The upper bow emerges from the wings initially at a…
Created on: Monday 19th August 2013
Last updated: Monday 19th August 2013
Spatial data recorded. This findspot is known as 'Near Frome', grid reference and parish protected.

Record ID: SOM-87A344
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragment from a Roman cast copper-alloy developed T-shaped brooch dating to c. AD 75-150. The fragment consists of the abraded bow and foot with catch-plate on the reverse; the head and pin are both missing. The bow is flat with rounded edges. At its centre it expands into a flattened lozenge shape. This shape is decorated on the front with a moulded lozenge within a lozenge recess. Within the moulding is a further recess with traces of red enamel. The bow curves gradually in profile. The catch-plate is abraded at the foot. For similar brooches see Hattatt (2000, 303; refs. 318, 319).
Created on: Thursday 5th September 2013
Last updated: Wednesday 23rd October 2013
Spatial data recorded.

Record ID: SOM-7C0E95
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
The lower part of the bow and catch-plate of a Roman copper-alloy brooch. The upper part of the bow, the head of the brooch and pin are missing due to an old, twisted irregular break. In cross-section, the bow is rectangular with rounded corners; it generally has flat upper and lower surfaces, though with a recessed channel on the lower . The bow is elongated trapezoidal and tapers gradually from the point of the break (W.: 8.5mm) to a width of 5.6mm at the foot. The foot terminates in a transverse ridge decorated with two angled incisions. The leg above is finely decorated above a pa…
Created on: Monday 4th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'Otterhampton CP', grid reference and parish protected.

Record ID: SOM-B70767
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper alloy T-shaped brooch of early Roman date. This Wilsford type brooch is incomplete in as much as it is missing its pin. The cylindrical wings conceal the copper-alloy axis bar for the hinged pin. Their upper surfaces are decorated with two incised lines at each end. The head of the pin has a pointed projection for tensioning, but this is all that survives of the pin (loose). The bow has a D-shaped cross-section and projects forward from the wings. The upper bow has moulded decoration in the form of four ridges with central grooves either side of a central recessed rib. Its l…
Created on: Tuesday 19th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'Wincanton', grid reference and parish protected.

Record ID: SOM-B764A1
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy Dorset-type T-shaped brooch of early Roman date. The head, pin and upper part of the bow are missing to old breaks; the rest of the bow, the leg and catch-plate survive. The head is lost to a horizontal break, at which point the bow has also been twisted. The bow is sub-rectangular in cross-section. The front is moulded with two ridges at the sides and a central bevelled ridge with deep longituidinal groove. Compared to the bow the plain leg is thinned. It tapers gradually, terminating in a ridged foot knob. On its lower surface the catch-plate survi…
Created on: Tuesday 19th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'Wincanton', grid reference and parish protected.

Record ID: SOM-F92DC6
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragmentary cast copper alloy T-shaped brooch of early Roman date. Present is the head, with broken pin, and upper bow; the lower bow, including leg and catch-plate, are missing. The head is formed of cylindrical wings with a central slot. The wings contain the copper-alloy axis bar for the hinged pin, viewable within the slot. The head of the copper-alloy pin, with spur, is still in the slot; only the beginnings of the rest of the pin survives in addition, bent to one side. Both wings are decorated with a trio of lines at the end on the upper surface. There is no evidence for a tab…
Created on: Monday 4th August 2014
Last updated: Monday 4th August 2014
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.

Record ID: SOM-F9D5FA
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragmentary cast copper alloy developed T-shaped brooch of early Roman date. Present is the most of the head and upper bow; the pin, lower bow, including leg and catch-plate, are missing. The head is formed of cylindrical wings with a central slot. One of the wings is broken with only about half of the original wing surviving. Orange/brown corrosion product in the slot and on the lower surface of the bow below suggests that the axis bar for the hinged pin was made of iron. Both wings are decorated with a trio of grooves, thus creating a pair of ridges, at the end largely on the lowe…
Created on: Monday 4th August 2014
Last updated: Wednesday 6th August 2014
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.

Record ID: SOM-2451B2
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragmentary cast copper alloy T-shaped brooch of early Roman date. Present is part of the head and upper bow; the rest of the head, pin, lower bow, including leg and catch-plate, are missing. The head was formed of cylindrical wings with a slot that is slightly off centre; one of the wings has been lost beyond the head. Retained in the extant wing is the remnant of the copper-alloy axis bar for the former hinged pin, viewable within the slot. The surviving wing is decorated with a pair of transverse lines at the end on the upper surface. An integral headloop protrudes from the centr…
Created on: Wednesday 6th August 2014
Last updated: Wednesday 13th August 2014
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.