Back to simple search | Back to advanced search
You searched for:
Record ID: SOM-8C84C7
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A Roman copper-alloy lower part of the bow and catch-plate of a brooch. The upper part of the bow, the head of the brooch and pin are missing due to an old patinated break. In cross-section, the bow is rectangular with rounded corners; it generally has flat upper and lower surfaces. The bow is elongated trapezoidal and tapers gradually from the point of the break (W.: 5.9mm) to a width of 3.5mm at the foot. The foot is simply squared off and decorated with two transversely incised grooves; the leg above is plain. On the lower surface the solid catch-plate survives well. It is broa…
Created on: Monday 12th August 2013
Last updated: Monday 12th August 2013
Spatial data recorded.
This findspot is known as 'Misterton CP', grid reference and parish protected.
Record ID: SOM-21B4C2
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Roman probable initial T-shaped brooch, incomplete in so far as it is missing its pin (later 1st-century AD). The brooch survives well, only having suffered some post-depositional abrasions and slight pitting.
The head has tubular wings, flattened slightly on their upper surface. They are apparently plain. The axis bar is largely obscured by the wings, but is can be said to have been made from iron judging by orange corrosion product both at the wing terminals and within the pin slot. The hinged pin is missing.
The upper bow emerges from the wings initially at a…
Created on: Monday 19th August 2013
Last updated: Monday 19th August 2013
Spatial data recorded.
This findspot is known as 'Near Frome', grid reference and parish protected.
Record ID: SOM-4AC795
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Roman zoomorphic plate brooch in the shape of a rabbit shown in profile. The rabbit is depicted seated with compact, rounded body and proportionally small head. The fore and hind paws seem to be truncated, but would not have been that prominent to judge from comparanda. The eye is formed of a punch and a small ear extends behind the head. The body is corroded and pitted; it is pitting that seems visible rather than recesses for enamel found on similar brooches. The lower surface features a broken and abraded double pin lug at the centre of the rabbit's rear, and a a…
Created on: Friday 9th August 2013
Last updated: Wednesday 4th September 2013
Spatial data recorded.
This findspot is known as 'Misterton CP', grid reference and parish protected.
Record ID: SOM-87A344
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragment from a Roman cast copper-alloy developed T-shaped brooch dating to c. AD 75-150. The fragment consists of the abraded bow and foot with catch-plate on the reverse; the head and pin are both missing. The bow is flat with rounded edges. At its centre it expands into a flattened lozenge shape. This shape is decorated on the front with a moulded lozenge within a lozenge recess. Within the moulding is a further recess with traces of red enamel. The bow curves gradually in profile. The catch-plate is abraded at the foot. For similar brooches see Hattatt (2000, 303; refs. 318, 319).
Created on: Thursday 5th September 2013
Last updated: Wednesday 23rd October 2013
Spatial data recorded.
Record ID: SOM-B70767
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper alloy T-shaped brooch of early Roman date. This Wilsford type brooch is incomplete in as much as it is missing its pin. The cylindrical wings conceal the copper-alloy axis bar for the hinged pin. Their upper surfaces are decorated with two incised lines at each end. The head of the pin has a pointed projection for tensioning, but this is all that survives of the pin (loose). The bow has a D-shaped cross-section and projects forward from the wings. The upper bow has moulded decoration in the form of four ridges with central grooves either side of a central recessed rib. Its l…
Created on: Tuesday 19th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded.
This findspot is known as 'Wincanton', grid reference and parish protected.
Record ID: SOM-7C0E95
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
The lower part of the bow and catch-plate of a Roman copper-alloy brooch. The upper part of the bow, the head of the brooch and pin are missing due to an old, twisted irregular break. In cross-section, the bow is rectangular with rounded corners; it generally has flat upper and lower surfaces, though with a recessed channel on the lower . The bow is elongated trapezoidal and tapers gradually from the point of the break (W.: 8.5mm) to a width of 5.6mm at the foot. The foot terminates in a transverse ridge decorated with two angled incisions. The leg above is finely decorated above a pa…
Created on: Monday 4th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded.
This findspot is known as 'Otterhampton CP', grid reference and parish protected.
Record ID: SOM-B764A1
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy Dorset-type T-shaped brooch of early Roman date. The head, pin and upper part of the bow are missing to old breaks; the rest of the bow, the leg and catch-plate survive. The head is lost to a horizontal break, at which point the bow has also been twisted. The bow is sub-rectangular in cross-section. The front is moulded with two ridges at the sides and a central bevelled ridge with deep longituidinal groove. Compared to the bow the plain leg is thinned. It tapers gradually, terminating in a ridged foot knob. On its lower surface the catch-plate survi…
Created on: Tuesday 19th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded.
This findspot is known as 'Wincanton', grid reference and parish protected.
Record ID: SOM-ACACA4
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A Roman copper-alloy initial T-shaped brooch, incomplete in so far as it is missing the majority of its pin. The brooch consists of cylindrical wings, bow and foot with catch-plate at the back. The wings are decorated with a pair of incised lines at their tip on the upper surface. The front of this decoration is demarcated by a incised longitudinal line which travels towards the slot, without reaching it. The remains of the circular copper alloy axis bar is visible at the tips. Between the wings is a slot in which the remnants of the pin are hinged. The pin has a pointed spur at its h…
Created on: Monday 6th January 2014
Last updated: Monday 6th January 2014
Spatial data recorded.
This findspot is known as 'Bawdrip CP', grid reference and parish protected.
Record ID: SOM-5DE141
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
A damaged and incomplete copper-alloy 2nd-century Roman disc brooch of the tutulus type. The circular brooch would have originally had eight plain, squared off peripheral lugs; three are now missing. The lugs are external on a rim. The rim is echoed by a ridge within; the groove within may have held enamel. This border has received considerable old damage leading to fractures and losses at the circumference and the grooved zone within. A second zone of similar width sits within the inner ridge and before the central boss; this has suffered considerable losses and abrasions too. The ce…
Created on: Thursday 22nd August 2013
Last updated: Friday 10th January 2014
Spatial data recorded.
Record ID: SOM-9F9187
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
An incomplete large Roman cast copper-alloy developed T-shaped brooch dating to the late 1st to early 2nd century AD. The pin, lower part of the bow and the foot are missing following old damage. The head has two hollow cylindrical wings with flattened upper surfaces. They held the axis bar for the hinged pin. The axis bar survives in part, largely corroded, made of iron. Between the wings on the under side of the head is a slot in which the pin would have hinged. On the underside of the wings behind the slot is a thickened patch which may have helped retain the pin in use. R…
Created on: Tuesday 13th August 2013
Last updated: Friday 10th January 2014
Spatial data recorded.
This findspot is known as 'Misterton CP', grid reference and parish protected.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 25
Search server index: valhalla
You are viewing records: 1 - 10.
1 - 10 of 25 records.