Back to simple search | Back to advanced search

    You searched for:

    • Broad period: POST MEDIEVAL
    • Created by: Laura Burnett
    • Sort: workflow

  • Thumbnail image of SOM-8DFCA2

Record ID: SOM-8DFCA2
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Unusually wide post medieval cast copper alloy double loop asymmetrical buckle frame with one D-shaped and one trapezoid loop. The D-shaped loop curves out at the centre of the outer edge to create a projecting point in the shape of an ogee arch. The loops are trapezoid in section with bevelled sides and a flat back although the outer edge of the trapezoid loop is worn to an oval shape. The sises of the D-shaped loop are slightly wider. The strap bar is missing with old breaks at either end; there are pairs of lobed knops on the outer side opposite the breaks. The surface has a silver…
Created on: Thursday 8th September 2011
Last updated: Wednesday 14th September 2011
Spatial data recorded. This findspot is known as 'Misterton', grid reference and parish protected.


  • Thumbnail image of SOM-2CAD57

Record ID: SOM-2CAD57
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Post Medieval cast copper-alloy strap fitting, probably for a sword belt of 16th-17th century date. One end of the strap fitting survives with part of a pendant loop. It is a shaped plate with a flat back and moulded front. At one end is a circular terminal with a further projecting terminal knop at the end, now lost to an old break. The circular section has a recessed front with a raised fleur de lis in the centre surrounded by a circular border the ends of which curl back creating a scolled effect. The next element is a waisted section with five incised transverse lines a…
Created on: Monday 21st February 2011
Last updated: Friday 8th April 2011
Spatial data recorded. This findspot is known as 'Martock', grid reference and parish protected.


  • Thumbnail image of SOM-EEE618

Record ID: SOM-EEE618
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete probably Post Medieval mount with hook at the end which holds a separate copper alloy ring. Most of the mount, including any attachments are missing to an old break with just the lower end of the probably rectangular plate remaining. It is flat with a broad incised horizontal line running across it just above the end. At the end the plate narrows into a long hook, the tip of which is bent back in a loop. The hook is trapezoid in section with bevelled sides and wider back and tapers gradually in width from the plate to the blunt end. The hook holds a plain copper alloy ring,…
Created on: Wednesday 20th April 2011
Last updated: Monday 2nd May 2011
Spatial data recorded. This findspot is known as 'Zeals', grid reference and parish protected.


  • Thumbnail image of SOM-026484

Record ID: SOM-026484
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval Venetian silver soldino of Doge Leonardo Loredan (1501-1521).
Created on: Thursday 21st April 2011
Last updated: Monday 2nd May 2011
Spatial data recorded. This findspot is known as 'Micheldever', grid reference and parish protected.


  • Thumbnail image of SOM-587964

Record ID: SOM-587964
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Post Medieval cast copper-alloy mount of probable 16th or 17th century date. The mount takes the form of a flat plate with bevelled sides. One end is complete and is divided into three branches, the outer branches curve in and this curve continues to a narrow point below the terminal. Beyond this narrow point the sides curve out again as the plate widens out to points on both sides before begining to narrow again to the old break. It is possible the mount was symetrical with the points creating a lozenge centre flanked byt three branched terminals at each end. Extending fr…
Created on: Monday 25th April 2011
Last updated: Monday 2nd May 2011
Spatial data recorded. This findspot is known as 'Micheldever', grid reference and parish protected.


  • Thumbnail image of SOM-582637

Record ID: SOM-582637
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper-alloy mount of probable 16th or 17th century date. The mount takes the form of a flat plate with bevelled sides. The long plate has an oval centre flanked by widened double collars beyond which are circular terminals. The double collars are seperated from each other by a deep groove but the front is otherwise flat. Extending from the reverse are two integral attachment spikes, they are flat and taper gradually from a wide base to pointed tip. The spikes start near each end and are bent inwards at 90 degrees towards the middle. The mount measures 34.0mm lon…
Created on: Monday 25th April 2011
Last updated: Monday 2nd May 2011
Spatial data recorded. This findspot is known as 'Micheldever', grid reference and parish protected.


  • Thumbnail image of SOM-58B948

Record ID: SOM-58B948
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy oval buckle frame with a central strap bar creating two D-shaped loops. The frame is triangular in section with flat back and inner side and angled outer side. The strap bar is narrowed. It is 25.6mm long, 20.8mm wide and 2.1mm thick, it weighs 2.54 grams. The buckle is similar to one illustrated in Whitehead (2003:48) no.278, who suggests it is a show buckle of c.1650-1720 AD.
Created on: Monday 25th April 2011
Last updated: Monday 2nd May 2011
Spatial data recorded. This findspot is known as 'Micheldever', grid reference and parish protected.


  • Thumbnail image of SOM-EBFDB3

Record ID: SOM-EBFDB3
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver threepence of Elizabeth I (1558-1603), initial mark portcullis, dated 1566 on coin, North 1998.
Created on: Monday 2nd May 2011
Last updated: Wednesday 22nd June 2011
Spatial data recorded. This findspot is known as 'Dinton', grid reference and parish protected.


  • Thumbnail image of SOM-EC27D4

Record ID: SOM-EC27D4
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver half crown of Charles I (1625-1649), London (Tower) mint, Group III, early horseman, initial mark tun, 1636-1638 AD, North 2209. The coin is double struck.
Created on: Monday 2nd May 2011
Last updated: Wednesday 22nd June 2011
Spatial data recorded. This findspot is known as 'Dinton', grid reference and parish protected.


  • Image not taken

Record ID: SOM-009097
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper-alloy mount of probable 16th to 18th century date with two sections of leather still attached. The mount takes the form of a long, narrow, plate with a complicated outline and curved in profile. At the centre is a lozenge shaped section with a raised central lozenge, it is concave o the back behind the raised section. The lozenge is flanked by ovals with are as wide as it is but much thinner.From the ovals project piriform sections, they curve out to a shoulder just beyond the ovals before curving inwards to a narrow waist. One has broken across this waist wh…
Created on: Tuesday 3rd May 2011
Last updated: Wednesday 15th February 2012
Spatial data recorded. This findspot is known as 'Pilton', grid reference and parish protected.


  • Thumbnail image of SOM-10EB37

Record ID: SOM-10EB37
Object type: RIVET
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Two copper alloy sheet late Medieval or Post-Medieval rivets, of the type usually used for repairing metal vessels. The rivets are formed from kite shaped pieces of sheet metal, rolled into a cone, with the top folded over to form the head. Rivet 1 (photo): Length: 29.2mm, Width of head: 12.1 by 8.9mm, Maximum diameter of shank: 7.1mm, Weight: 3.25g Rivet 2: Length: 23.4mm, Width of head: 10.0 by 6.8mm, Maximum diameter of shank: 7.6mm, Weight: 2.10g A discussion of these rivets can be found in Egan (2005, p.101). Egan suggests that these were a later form a rivet, which took …
Created on: Friday 4th March 2011
Last updated: Sunday 6th March 2011
Spatial data recorded. This findspot is known as 'Alvediston', grid reference and parish protected.


  • Thumbnail image of SOM-3F15F8

Record ID: SOM-3F15F8
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval lead two disk cloth seal with a large letter A flanked with annulets and with an annulet below all within a pellet border on one side and with a pinecone in a cusped border on the other. The tab that would have joined the two disks is missing from an old break. It is 21.2mm by 18.5mm and 3.6mm thick; it weighs 6.87 grams. The design indicates it is from a mixed linen-warp and cotton weft fabric from Augsberg, Germany, dating to the 16th or 17th century. Cf. Egan (1994) nos.308-10.
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.


  • Thumbnail image of SOM-3FDBB7

Record ID: SOM-3FDBB7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval, 17th century, cast copper alloy openwork mount with integral attachment spikes. The mount is flat and shaped into four lobes, two large pointed oval lobes alternating with two smaller circular lobes. The tip of one of the pointed oval lobes is lost, possibly to damage. The lobes have circular holes in the centre and there is a further hole in the centre of the mount; the holes in the pointed oval lobes join the central hole while those in the circular lobes are connected to it by an indent on the front. On the back are two integral spikes, one is complete and bent inwar…
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.


  • Thumbnail image of SOM-400FE3

Record ID: SOM-400FE3
Object type: BRIDLE FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval, 17th century, cast copper-alloy circular bridle boss. The boss is a hollow hemisphere, with an openwork design and a flat border around the edge. A break to one side has removed part of the border and one of the pair of rivet holes. The boss has a raised central knop, around which is the openwork main body, consisting of slim curving arms. The less worn arms are decorated with a scale like patten of raised semi-circles running down each arm and incised lines down their inner sides which continue at the base to meet the base of the next arm. Around this is a narrow rop…
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.


  • Thumbnail image of SOM-09E840

Record ID: SOM-09E840
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post medieval cast copper alloy mount with a flat back and moulded front. It is circular with a raised line border outside which is symmetrical foliate decoration rising to eight peaks with pellets at the points, the outer edge is shaped to this decoration. The cental field is recessed with a raised helmeted and bearded head facing right in profile in the centre. The head is flanked by two circular rivet holes for attachment. There are remains of gilding on the front and traces on the back. It is 31.0mm in diameter, 2.9mm thick and weighs 7.02 grams. The style suggests an early to …
Created on: Wednesday 16th March 2011
Last updated: Thursday 17th March 2011
Spatial data recorded. This findspot is known as 'Hinton St George', grid reference and parish protected.


  • Thumbnail image of SOM-DE1BE3

Record ID: SOM-DE1BE3
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy mount moulded in the shape of a double six petalled rose. The front has a domed centre moulded into a central pellet surrounded by six leaves. The flat outer border and edge is moulded into six further petals with pointed sepals between. The back has a concave centre oppsite the domes front flanked by the stubs of two integrally cast spikes for fixing the mount to a leather strap. The mount measures 32.1mm diameter, 6.8mm thick excluding the spikes, 11.6mm including and weighs 10.69 grams. This mount probably dates to the 16th-17th centuries.
Created on: Monday 14th March 2011
Last updated: Monday 14th March 2011
Spatial data recorded. This findspot is known as 'Holford', grid reference and parish protected.


  • Thumbnail image of SOM-DFC8E6

Record ID: SOM-DFC8E6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy hooked mount, probably a 17th century sword belt fitting. The mount has a flat oval central plate with moulded decoration on the front in the form of a double stranded lozenge with concave sides, probably with stamped flowers and line decoration around it, now obscured by corrosion. At one end of the plate is a projecting circular flat knop with a smaller oval terminal knop beyond it. The circular knop has the remains of an iron rivet through the centre. At the opposite end of the plate is an oval-sectioned backward-facing hook which curves through a he…
Created on: Monday 14th March 2011
Last updated: Monday 14th March 2011
Spatial data recorded. This findspot is known as 'Nether Stowey', grid reference and parish protected.


  • Thumbnail image of SOM-E0E185

Record ID: SOM-E0E185
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy traders token half penny issued by Jeffery Grove of Taunton, Somerset in 1664; Williamson (1891:989), Somerset 257.
Created on: Monday 14th March 2011
Last updated: Wednesday 16th March 2011
Spatial data recorded. This findspot is known as 'Milverton', grid reference and parish protected.


  • Thumbnail image of SOM-E367E3

Record ID: SOM-E367E3
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy sword belt fitting. It is roughly foliate in form, with incised decoration forming a leaf pattern. It has a trefoil shaped terminal at one end below which it narrows before widening to rounded shoulders about a third of the way down. from which it tapers to the other end where there are two lugs flanking a forward projecting hook. The hook is oval in cross section and ends in a spherical terminal. There are two circular fixing holes containing iron corrosion, one near the trefoil terminal and one above the hook. It is 51.3mm long, 20.4mm wide and 11.6mm…
Created on: Monday 14th March 2011
Last updated: Monday 14th March 2011
Spatial data recorded. This findspot is known as 'Nether Stowey', grid reference and parish protected.


  • Thumbnail image of SOM-1EC421

Record ID: SOM-1EC421
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper-alloy asymmetrical buckle frame. The frame has one rectangular and one D shaped loop. Both look to have a groove along the outer edge. At the centre of the D shaped look the inner side projects inwards in a point forming a wider area. The strap bar is narrowed and recessed. There are traces of a white metal, silver or tin, coating on the front. It is 38.1mm long, 28.3mm wide and 2.5mm thick and weighs 6.90grams. Whitehead (2003:91) illustrates a similar example, no.566, which he dates to c.1575-1700 AD.
Created on: Thursday 17th March 2011
Last updated: Thursday 13th February 2014
Spatial data recorded. This findspot is known as 'Godney', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,152
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 1,504
  • Mean quantity: 1.306
  • Maximum: 100

Filter your search

Institution

1 - 20 of 1,152 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.