Back to simple search | Back to advanced search

    You searched for:

    • Broad period: POST MEDIEVAL
    • Created by: Robert Webley

  • Thumbnail image of PAS-8CE462

Record ID: PAS-8CE462
Object type: COIN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A slightly clipped post-medieval silver penny of Charles I (1625-1649). Probably Group D, fourth bust (probably North 2267). Initial mark: unclear, possibly one pellet, dating to c. 1634-1640. Mint of London (Tower). North (1991, 163). It measures 13.3mm in diameter, 0.4mm in thickness and weighs 0.46g. It has suffered some small circumferential abrasions, in addition to probable clipping.
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8CD8BD

Record ID: PAS-8CD8BD
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-looped buckle of post-medieval date, complete with pin. It measures 28.8mm by 23.4mm by 3.3mm and weighs 6.63g. The loops are oval and are bevelled externally on the upper surface; the lower surface is flat with some steep internal bevelling. At both ends of the pin bar is a thin moulded knop. The pin bar is recessed. Around it a pin of thick sheet folded construction survives in place. The buckle is of a dull red-brown colour. The loops have been angled upwards, possibly through use rather than damage. For comparable buckles see Whitehead (1996, 54); they are co…
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8CD185

Record ID: PAS-8CD185
Object type: DIVIDERS
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment from a post-medieval copper-alloy and iron precision instrument - pair of dividers dating to the 16th-17th century. Such dividers comprised two hinged arms; the upper section is copper alloy while the lower arms are iron; here only one upper section survives, broken at both ends. At one angled end of the fragment was where the piece hinged with the other upper section. The arms are decoratively cast so that they have a varied, faceted appearance. On the middle section of the arms this faceting has created an oval depression on the internal surface. Externally the equivalent…
Created on: Thursday 22nd October 2015
Last updated: Thursday 4th February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8CC3DD

Record ID: PAS-8CC3DD
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy post-medieval dress hooked of Read's Early Post-Medieval Class E, Type 3, with a sub-circular openwork plate with a central fleur-de-lis. It has a flat plate, integral rectangular attachment loop, and integral rear-curving hook. The plate has openwork decoration consisting of a central fleur-de-lis moulded on the front within an inner circle. The border surrounding the inner circle has moulded decoration on the front surface with openwork between the inner circle and the border. Above the inner circle is a wide trefoil whose upper side forms the base of the …
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8CB5E6

Record ID: PAS-8CB5E6
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy post-medieval double-looped buckle frame of asymmetrical form. One loop is trapezoidal while the other is D-shaped. The former has a central pin rest and rebated outer edge. The D-shaped loop is similarly rebated on its outer edge and features a central rounded protrusion internally. Overall the front of the frame is bevelled shallowly from the internal edge to the external. The pin is missing; traces of ferrous corrosion product towards the centre of the pin bar suggest that it would have been made of iron. The buckle is angled in profile, probably from use rather than…
Created on: Thursday 22nd October 2015
Last updated: Friday 5th February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8CB0CB

Record ID: PAS-8CB0CB
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post-medieval unusual dress hook of composite construction (c. 16th century). The front plate would have comprised three hollow-domed bosses, only two of which survive following old breaks. The bosses are apparently undecorated; both are becoming detached from the plate at places. That set uppermost is missing its counterpart. When complete, these upper bosses would have had a central perforation. In the perforation of the extant boss is located one end of a separate copper-alloy angular wire loop, retained in place by a lead fill in the hollow reverse. The lower boss, s…
Created on: Thursday 22nd October 2015
Last updated: Tuesday 23rd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8CA942

Record ID: PAS-8CA942
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy mount: probably a post-medieval book fitting (hook piece). The artefact is generally flat a sheet-like, but has been bent slightly as a result of old damage. The main body takes the form of a lozenge truncated at each end. At the attachment end there is a basic, rectangular transverse protrusion on each side with an abraded terminal beyond. The rectangular arrangement is echoed at the other end of the lozenge. Beyond this, is a flared terminal with two notches that create a low central triangle. A separate iron rivet is retained within the flared terminal at its centre.…
Created on: Thursday 22nd October 2015
Last updated: Thursday 4th February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8C8180

Record ID: PAS-8C8180
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy 17th-century token halfpenny issued by Thomas Norris of Aynho, Northamptonshire. Williamson (1891, 885) Northamptonshire no. 2, dating to 1648-1672. It measures 17.7mm in diameter, 0.8mm in thickness and weighs 0.77g
Created on: Thursday 22nd October 2015
Last updated: Thursday 19th November 2015
Spatial data recorded.


  • Thumbnail image of PAS-8C4347

Record ID: PAS-8C4347
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval or post-medieval cast copper-alloy double-looped buckle incomplete in so far as it is missing its pin. The frame is formed of two conjoined ovals such that the sides incurve. The frame is shallowly bevelled externally on the upper surface; it is otherwise flat, as is the lower surface. The pin bar has a trapezoidal cross-section and is recessed slightly on the front. The buckle frame has a mid-grey/green patina and is covered in file marks on the front. Length: 22.4mm, Width: 18.8mm, Thickness: 2.9mm, Weight 3.32g.
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8C3555

Record ID: PAS-8C3555
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy shoe or knee buckle with separate pin and stud chape, the latter broken through its loop. The frame of the buckle is symmetrical, comprising two D-shaped loops that form a continuous oval frame. These have shallow curved internal expansions along each short edge. At the centre of each of long side the frame is thickened, visible on the reverse as a discrete area, and drilled for a separate iron spindle/axis; traces of corrosion product are visible. A separate chape is also retained attached by the axis bar, which sits within a cylindrical sleeve at the cha…
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8C2B96

Record ID: PAS-8C2B96
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A damaged and incomplete copper-alloy post-medieval double-looped buckle frame, missing most of one of its loops as well as its pin. The pin bar extends beyond the sides in thin lobes, with recesses to each side which emphasise them. The reverse and upper surfaces are flat, and the frame bevelled internally and externally on the upper surface, giving it a semicircular cross-section. On the front of the outer edge of the extant loop is a centrally located eight petalled rosette. The buckle has a dark-green patina. Length: 25.9mm; Width: 28.4mm; Thickness: 2.1mm; Weight: 3.13g Suc…
Created on: Thursday 22nd October 2015
Last updated: Wednesday 7th February 2018
Spatial data recorded.


  • Thumbnail image of PAS-8BD48D

Record ID: PAS-8BD48D
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy post-medieval double-looped buckle dating to the period c. 1550-1650. The buckle is D-shaped in form, having lost a loop, and in cross-section. It has a circular knop at the centre of the outer edge of the surviving loop, possibly with small decorative radial moulded ridges, now unclear. The pin bar has a small, pointed moulded knop at either end. The pin consists of a separate copper-alloy thick sheet which has been bent around the pin bar. This has corroded to a light-green colour, compared to the dark-brown of the frame, and may represent a repair; the lo…
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8BCC73

Record ID: PAS-8BCC73
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy uniface strap mount in the form of an acorn (c. 17th century). On the front the cup is delineated from the nut by a transverse grooved low ridge. At the cup's base the acorn has a small rounded knop. The upper surface of the cup may have been decorated with cross-hatching but any decoration appears to have been worn away over time. The front is shallowly convex; the reverse is hollowed. The reverse features a pair of small integral lugs arranged longitudinally towards each end of the mount; one is broadly central, the other more off centre. They have been …
Created on: Thursday 22nd October 2015
Last updated: Wednesday 3rd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8BC400

Record ID: PAS-8BC400
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy square coin weight possibly for a half ('spur') ryal of James I, tariffed at XVIs, VId, indicating it related to coins of the revalued 2nd coinage, dating to 1612-1619. One side seemingly depicts a spur with central rose; the other a mark of value with a crown above: the 's' denoting shilling might be discernible. These weights were replaced by round ones with similar designs post-1632 (Withers and Withers 1995, 38). Highly corroded, the coin weight measures 15.2mm by 14.9mm, 3.8mm thick and weighs 5.32 grams (81.94 grains).
Created on: Thursday 22nd October 2015
Last updated: Monday 14th December 2015
Spatial data recorded.


  • Thumbnail image of PAS-8BB4F7

Record ID: PAS-8BB4F7
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A damaged and incomplete cast copper-alloy leg and foot from a later medieval to post-medieval cooking vessel. The object is splayed at the base in a simple, out-turned, pad-like foot of now sub-oval cross-section, significantly worn at both front corners, and probably abraded at the reverse corners. The front of the foot and the leg are faceted around the central longitudinal plane, giving the fragment a five-sided cross-section, with flat reverse. The long sides of the leg appear to be heavily abraded. The break where the leg would have joined the body of the vessel is old. The fl…
Created on: Thursday 22nd October 2015
Last updated: Thursday 4th February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8BA8A7

Record ID: PAS-8BA8A7
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy dress hook dating to the post-medieval period (c. 16th century). The body is sub-rectangular, with two large attachment holes uppermost, when the hook is orientated down. The plate features a broad transverse groove with a moulded ridge above, between this and the holes, and another ridge below. The ridges are decorated with a cabled pattern, that is, diagonal ridges. Below the lowermost ridge is a pair of pointed knops, either side of the hook. The knops sit either side of curved cut-outs that echo the attachment holes above. The hook itself curves round on it…
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8BA238

Record ID: PAS-8BA238
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy early post-medieval toggle clasp. The main body of the clasp is a convex oval shape with hollow reverse. At one end there is a transverse ridge dividing the main body from a rounded terminal element with knop. This latter retains traces of a rivet, with orange corrosion product on both faces suggesting the rivet was made of iron. A similar rivet hole with corroded rivet is located at the base of the main body. Below this is a double transverse ridge beyond which the object is rebated and narrowed, but soon truncated. The artefact is similar to an early po…
Created on: Thursday 22nd October 2015
Last updated: Tuesday 2nd February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8B7FD5

Record ID: PAS-8B7FD5
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A damaged and incomplete cast copper-alloy leg and foot from a later medieval to post-medieval cooking vessel. The object is splayed at the base in a simple, out-turned, pad-like foot of now sub-rectangular cross-section, now broken. The front of the foot and the leg are faceted around the central longitudinal plane, giving the fragment a five-sided cross-section, with flat reverse. The long sides of the leg are straight, and expand very gradually towards the foot. The break where the leg would have joined the body of the vessel is old and stepped. The flat back and base make an obtus…
Created on: Thursday 22nd October 2015
Last updated: Sunday 7th February 2016
Spatial data recorded.


  • Thumbnail image of PAS-8B7A72

Record ID: PAS-8B7A72
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A clipped post-medieval silver halfpenny of Henry VIII (1509-1547) dating to 1532-1542. Second coinage, Withers type 1D (North 1815). Initial mark: arrow. Mint of London. North (1991, 112). This coin measures 11.1mm in diameter and weighs 0.39g. The clipping and losses at the circumference extend around most of the coin.
Created on: Thursday 22nd October 2015
Last updated: Monday 14th December 2015
Spatial data recorded.


  • Thumbnail image of PAS-8B7152

Record ID: PAS-8B7152
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy hooked tag dating to the post-medieval period. The artefact has survived well and all of its attributes are intact, with the exception of the tip of the curved hook, the remainder of which has been twisted to one side. At the other end of the mount is a trapezoidal attachment loop. The body below is heart-shaped, though with a straight top formed of the base of the loop. The reverse is flat apart from a slight hollow at the centre, while the upper surface of the body has moulded decoration on a sunken field within a raised border. The field features sym…
Created on: Thursday 22nd October 2015
Last updated: Thursday 4th February 2016
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 340
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 343
  • Mean quantity: 1.009
  • Maximum: 2

Filter your search

1 - 20 of 340 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.