Record ID: WMID-682F0A
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete copper alloy cruciform mount of Post Medieval dating (AD 1600 to AD 1800). The mount is cruciform in shape, with fleur de lis/lys knops on each corner. The front have been decorated with a central pellet surrounded by a circle of pellets, all within a lozenge shaped border. The edges have been bevelled. On the reverse, in the centre, is an integral attachment spike. This is square sectioned and measures 2.5 mm by 3.0 mm.  The mount has a length of 23.6 mm, a width of 24.0 mm and is 9.9 mm thick (including spike), 2.8 mm thick (not including spike. It weighs 3.3 g. …
Created on: Thursday 6th July 2023
Last updated: Tuesday 19th September 2023
Spatial data recorded.

Record ID: WMID-442CAC
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy shield shaped strap or harness mount, of Post Medieval dating (AD 1600 to AD 1800). Over 75% of the mount is present. It is shield shaped, with two integral attachment spikes on the reverse. The shield-shaped part is flat with convex side edges. The top edge is concave, At the opposite end there is a circular plano-convex terminal knob. The spikes on the reverse are circular in cross-section, positioned off-centre, and are bent away from each other. The lower one is incomplete. The front of the shield bears foliate decoration in low moulded relief …
Created on: Thursday 22nd June 2023
Last updated: Thursday 22nd June 2023
Spatial data recorded.

Record ID: WMID-E41BF6
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete copper alloy domed mount or strap fitting, of probable Post Medieval dating (AD 1500 to AD 1700). The mount is sub circular in shape, and domed. No decoration is visible on the front of the mount. The remains of two attachment spikes are located on opposite sides of the reverse.  It measures 15.1 mm in length, 12.2 mm wide and 4.6 mm thick. It weighs 1.2 g. The mount is a mid green to brown colour, with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in a loss of some of the original surface detail.
Created on: Friday 12th May 2023
Last updated: Friday 12th May 2023
Spatial data recorded.

Record ID: WMID-3AB967
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy mount or strap fitting of Post Medieval dating (AD 1550 to AD 1700). The plate has two round lobes at one end which taper to a triangular terminal at the other which give the whole mount a phallic shape. At the back are two circular sectioned integral attachment lugs, with blunt points at the apex and at the opposite end of the long axis. The surface is undecorated. It measures 19.6 mm in length, 11.3 mm wide and 7.4 mm thick (including spikes). 2.1 mm thick (not including spikes). It weighs 0.9 g. The mount is similar to other phallic shaped m…
Created on: Thursday 4th May 2023
Last updated: Thursday 4th May 2023
Spatial data recorded.

Record ID: WMID-FC51FE
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
CHECK GRID REF! An incomplete copper alloy mount of probable Post Medieval dating (AD 1600 to AD 1800). The mount is roughly arrow shaped with a central tang, and curved wings with barbs to either side. Each barb terminates with a rounded pellet. There is a central raised ridge which continues into the tang, which expands slightly. The wings are decorated with a curvi-linear line. On the reverse are two integral attachment spikes, these have an diameter of 2.2 mm. The mount has been bent almost at ninety degrees, below the point of the arrowhead. It measures 21.3 mm in length, 17.0 …
Created on: Wednesday 19th April 2023
Last updated: Wednesday 19th April 2023
No spatial data available.

Record ID: WMID-F54234
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A complete copper alloy zoomorphic (lion) domed mount, of probable Post Medieval dating (AD 1600 to AD 1800). The mount has no signs of attachment. The mount is shield shaped, with a rounded lower half and and an endented top edge, with central point. It is zoomorphic, depicting a lion facing forwards. The mane is present around the outside edge. The face is domed, the nose prominent and triangular in shape in the centre. Two rounded cheeks below and above the mouth. The eyes are set lower above the nose, with prominent eyebrows. The reverse is undecorated and concave. It measures 30…
Created on: Friday 17th February 2023
Last updated: Friday 17th February 2023
Spatial data recorded.

Record ID: WMID-36E1A4
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete copper alloy mount of Early Post Medieval dating (c. 1500 to c. 1600). The mount is in the form of an extended fleur de lis (lys). The centre expands into a pear-shaped body between a collared section at the top which tapers into a smaller knop, with a tapered trefoil knop at the base. The front is convex and the reverse is largely flat. The reverse has the stubs of two integral corroded rivets. Traces of tinning survive in patches on the surface. It measures 24.4 mm in length, 8.4 mm wide and 5.9 mm thick. It weighs 2.3 g. The mount is a dark green…
Created on: Tuesday 17th May 2022
Last updated: Tuesday 17th May 2022
Spatial data recorded.

Record ID: WMID-A54BC7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper-alloy mount with integral rivets, of Post-Medieval period dating (c. AD 1500 - AD 1700).  The mount is kite-shaped (convex kite/deltoid) in plan and broadly trapezoidal in cross-section, with a raised kite-shaped central plate.  On the reverse, the mount is flat with two downward projecting integral rivets. The rivets taper to a sharp point. A recessed border is present around the edge of the mount.  It measures 18.2 mm in length, 11.1 mm wide and 5.3 mm thick (including rivets). It weighs 1.2 g. Several similar kit shaped mounts have been …
Created on: Tuesday 10th May 2022
Last updated: Tuesday 10th May 2022
No spatial data available.

Record ID: WMID-A237AD
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete figurative, flat copper alloy strap fitting or belt mount of Post Medieval date (AD 1600 to AD 1700). The mount is in the form of a stylised acorn, and includes on the reverse two broken-off integrally cast attachment spikes. The front of the mount is convex, and the reverse concave. The general shape is a pointed oval with an short forked extension at the bottom end representing the twig of the tree from which the acorn has sprouted. A rounded extension at the top represents the growing tip of the acorn. The lower half of the mount is cross-hatched to resem…
Created on: Tuesday 10th May 2022
Last updated: Tuesday 10th May 2022
No spatial data available.

Record ID: WMID-90BF4B
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy domed sexfoil mount of the Late Medieval to Early Post Medieval period, dating to AD 1400 - AD 1600. The mount consists of a domed head with six diagonal incised lines, creating a petal like design, each petal has a semi circular lobed projection forming the edge of the petal. The reverse of each petal is slightly concave, and has a small circular area cast slightly off centre, presumably the remains of the attachment spike.  The object measures 36.3 mm in length and is 37.1 mm wide. It has a thickness of 6.8 mm …
Created on: Tuesday 1st February 2022
Last updated: Monday 4th April 2022
Spatial data recorded.

Record ID: WMID-7484BA
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Solihull
Workflow stage: Awaiting validation
An incomplete copper alloy conical mount of probable Post medieval dating (AD 1500 to AD 1700).  The mount is conical in shape. It has a rounded flattened knop on the top, and then it gradually expands with a couple of decorative grooved collars as it extends downwards. Two circular attachment holes are present, each on opposite sides. It has a diameter of 3.0 mm. The mount has a sub circular flat base with a grooved ring running around the outside. On the inside of the mount, it is concave, with traces of iron corrosion products. It measures 24.1 mm tall. It has a diameter of 6…
Created on: Monday 13th December 2021
Last updated: Monday 13th December 2021
Spatial data recorded.

Record ID: WMID-9100A1
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper alloy mount or furniture fitting of Post Medieval dating (AD 1500 to AD 1700). The mount has a square flat head, with a circular sectioned attachment spike to the reverse. This attachment spike is incomplete, it has a diameter of 4.2 mm. The front of the mount bears the remains of a saltire design within a square border. It measures 16.0 mm in length, 16.7 mm wide and 2.4 mm thick (not including attachment spike). It is 9.2 mm thick including the attachment spike. It weighs 3.6 g. The mount is a dark green to brown colour, with an even surface pati…
Created on: Monday 8th November 2021
Last updated: Monday 8th November 2021
Spatial data recorded.

Record ID: WMID-9085EC
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete lead alloy pseudoheraldic mount of Post Medieval dating (AD 1600 to AD 1750). The mount is roughly oval in shape. The front bears moulded decoration. A flat topped shield is central, with a border. Around the edges are scrolls to the top and ribbons to the bottom. The reverse shows traces of three integral iron attachment spikes. It measures 38.2 mm in length, 30.0 mm wide and 5.3 mm thick. It weighs 19.2 g. The mount is a mid grey colour, with an even surface patina. A similar lead alloy mount has been recorded as DOR-C8748E and is considered to be P…
Created on: Monday 8th November 2021
Last updated: Monday 8th November 2021
Spatial data recorded.

Record ID: WMID-FED4DA
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete circular copper alloy mount of Post Medieval dating (AD 1500 to AD 1800). The mount is circular with a convex domed front face. No decoration is visible on the front face. The reverse is concave, with a centrally located integrally cast attachment spike. The spike has a square cross section and is incomplete, with a break approximately at the mid way point. The point is missing. It has a diameter of 29.0 mm and is 12.1 mm thick. It weighs 12.1 g. A similar mount has been recorded as SF-EED0BB on the PAS database and is considered to be Post medieval in dat…
Created on: Tuesday 27th July 2021
Last updated: Monday 14th February 2022
Spatial data recorded.

Record ID: WMID-D9C575
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy dodecafoil floral mount of Post Medieval dating (c. 1500 to c. 1700). It consists of a domed circular dodecafoil floral mount, with scalloped edges and a concave back. Staining is present in the cavity where the iron fixing pin, which was formerly embedded in a small central boss, has rusted away. The 'petals' are moulded in high relief, and traces of silvering are present in the grooves between them and on the reverse. It measures 25.9 mm in diameter and is 6.8 mm thick at the apex, and weighs 8.0g. The mount is a light grey to green colour. …
Created on: Thursday 1st July 2021
Last updated: Thursday 21st October 2021
Spatial data recorded.

Record ID: WMID-9EE8C3
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy domed mount of Post medieval dating (AD 1600 to AD 1800). The mount is sexfoil in shape, with extra triangular knops between each rounded petal. The triangular knops are decorated with three circular bosses. The mount is domed on the front and concave on the reverse. On the reverse a square sectioned attachment spike is present, located centrally. The attachment spike is incomplete, with a patinated break visible. It has a diameter of 23.3 mm and is 11.0 mm thick (including spike), 5.00 mm thick (not including spike). It weighs 4.7 g. The moun…
Created on: Wednesday 16th June 2021
Last updated: Wednesday 16th June 2021
Spatial data recorded.

Record ID: WMID-8B8D8A
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy mount or strap fitting of Post Medieval dating (AD 1600 to AD 1800). The mount consists of a plate with integrally cast attachment spikes, both broken. Each attachment spike has a circular cross section, with a diameter of 2.7 mm. The plate is sub circular, with a moulded design. This design starts with a winged cherub face at the top of a vine with radiating foliage, contained within a border composed of S-shaped scrollwork. The lowest portion of the mount terminates in two opposing scrolls. It measures 28.5 mm in length, 23.5 mm wide and 4.5 mm t…
Created on: Wednesday 10th March 2021
Last updated: Wednesday 10th March 2021
Spatial data recorded.

Record ID: WMID-F9F2B3
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy decorative mount, of Post Medieval dating (AD 1500 to AD 1700). This mount is broadly heart-shaped with a fleur-de-lis at one end and a rounded knop at the other. Raised decoration at the front consists of a central oval, within an oval cartouche. To either side, probable foliage. A six petalled flower is positioned at the base of the fleur-de-lis. The rear face is slightly concave and there is the remains of an integral spike at each end. Each spike has a circular cross section, with a diameter of 2.8 mm. It has a length of 38.1 mm, is 19.0 mm wid…
Created on: Wednesday 3rd March 2021
Last updated: Wednesday 3rd March 2021
Spatial data recorded.

Record ID: WMID-F95CDC
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy bar mount of Post Medieval dating (AD 1600 to AD 1800). The bar mount consists of a sub rectangular bar, with rounded corners. The front surface is slightly domed. No decoration, other than iregular scratches is present on the front. On the bar, situated at either end, are two integral circular sectioned incomplete rivets. The rivets have a diameter of 4.7 mm. The reverse is undecorated. It has a length of 44.7 mm, is 9.9 mm wide and 5.3 mm thick. It weighs 6.7 g. The bar mount is a mid to dark green colour, with an even surface patina.
Created on: Wednesday 3rd March 2021
Last updated: Wednesday 3rd March 2021
Spatial data recorded.

Record ID: WMID-6841E1
Object type: MOUNT
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete moulded figurative mount of probable Late Post Medieval to Modern dating (18th Century onwards). The mount is sub triangular in shape, with openwork details. The back is recessed. On the left hand side of the front, is a figurative person. The head is raised prominently away from the base of the mount. The detail for hair or a hat is uncertain. The eyes are circular and infilled with a dark material, possibly jet. A triangular nose is positioned between and below the eyes. No neck is present, and the figure continues downwards, wearing a robe with right arm held up …
Created on: Wednesday 24th February 2021
Last updated: Wednesday 24th February 2021
Spatial data recorded.