Record ID: WMID-19A977
Object type: BELL
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy crotal or rumbler bell of probable Post Medieval dating (16th to 17th Centuries AD). The bell is sub circular in plan and profile, with an integrally cast sub rectangular suspension loop attached to the top. The edges of the rectangular suspension loop have been bevelled. The base of the bell is semi circular, with a rectangular slot across the base, with circular ends. The Iron 'pea' is still present inside the bell. Minimal decoration appears visible on the lower hemispheres of the bell. The bell was cast in one piece, using two opposing moulds.…
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-F3CBE7
Object type: PIPE TAMPER
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy pipe tamper (stopper) of Post Medieval dating (AD 1700 to AD 1900). Over 75% of the pip tamper is present, with the stopper part missing. It is sub-rectangular in plan, with a moulded scene at the top forming a handle, and the remains of a stopper projecting from the base, with a patinated break. Both sides of the handle are moulded. One face shows an erotic or bawdy scene of a man and woman copulating under the canopy of a tree. Both figures are standing and the woman has her left leg raised to the horizontal, supported by the man's…
Created on: Wednesday 28th February 2024
Last updated: Wednesday 28th February 2024
Spatial data recorded.

Record ID: WMID-3BC0B4
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy double looped buckle, of Post Medieval dating (c. AD 1550 to c. AD 1650). 50% of the buckle frame is present, with only one loop, pin and the central bar surviving. The strap plate are missing, presumed lost in antiquity. The frame is sub oval in plan, and rectangular in cross section. The outer loops are both expanded, with one oblique groove present as pin rest. The remains of sub triangular knops are present at either end of the central strap bar. The back is flat and no decoration present. Traces of a black coating are pres…
Created on: Friday 26th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WMID-3B3A3E
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy zoomorphic strap fitting or belt hook, of Post Medieval dating dating (1500 to 1600 AD). It is S shaped with an oval cross section. A zoomorphic or animal head terminal is present at both ends, with a rounded nose, and circular eye. At the centre of the S is a 'waisted' area comprising a central flower design, with leaves pointing away on both sides. Iron corrosion products are present at the centre, and indicate that the pin may have been made from iron. The strap fitting measures 31.4 mm in length, 16.4 mm wide and 7.1 mm thi…
Created on: Friday 26th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WMID-2F40CD
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy probable furniture fitting of Post Medieval dating (AD 1700 to AD 1800).  The probable furniture fitting consists of a disc with twelve points, though with one larger and more angular than the rest. One side bears a moulded radial pattern, with each ray bordered like a petal. The larger petal forms part of an attachment/suspension fitting, with a longitudinal ridge on the reverse. The reverse of the disc has the remains of a central attachment spike in the centre.  It measures 31.9 mm in length, 22.5 mm wide and it is 4.9 mm thick. The metal is 2.…
Created on: Wednesday 20th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1C1DA8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy trapezoidal buckle and spindle, of Post Medieval dating (AD 1660 to AD 1720). The buckle frame is trapezoidal in plan, with a drilled frame, for a separate spindle. The frame exhibits moulded decoration. Scrolled knops are present on either side of the spindle holes and a moulded pin rest is present on both of the outer loops. Annulet decoration is present on the outer loops. The pin rest moulding consists of engraved opposing oblique lines, imitating either a scallop shell or a leaf.  The buckle measures 27.3 mm in length, 17.5 mm&nbs…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1BF257
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy trade weight of Post Medieval dating (17th to 18th Centuries AD). The weight is circular in plan. The obverse has a raised ring around the edge as a border. Three stamps are present. A Staffordshire Knot, a capital letter V and a capital letter H. The base of the weight is undecorated. Filemarks are present on the base. It has a diameter of 18.8 mm and is 4.4 mm thick. It weighs 5.7 g (0.20 oz). Several similar trade weights have been recorded on the PAS database, including: WMID-0EA67A, WMID-12D771 and SUR-82D25D. A cr…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-4835F3
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy coin weight for 21 shillings, of Post Medieval dating (AD 1760 to AD 1773). The coin weight is circular, with the same design on both faces: Italic S above 21, 5 D 9 G below. A beaded border is present around the outside. It has a diameter of 18.7 mm and is 4.3 mm thick. It weighs 7.6 g (116.7 gn). The coin weight is a mid brown colour, with an even surface patina. This would have been part of a set of 11 weights for Guinea, Moidore and Johannes coins; The Guinea series (21s, 10s 6d, 5s 3d) the moidore series (27s,13s 6d, 6s 9d) and the Johannes series (&pou…
Created on: Monday 27th November 2023
Last updated: Monday 11th December 2023
Spatial data recorded.

Record ID: WMID-474EBA
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A copper alloy chafing dish handle of Medieval to Post Medieval date (AD 1400-1600). The handle is roughly trapezoidal in shape, being wider at the bottom with rounded corners and a slightly inward curving lower edge whilst the upper edge short and straight. The bottom right corner has been bent slightly upwards. The handle has a square cross section throughout. There is an incomplete attachment lug. The lug has a more drop-shaped, sub-oval body in profile that is rectangular in cross section. There is a rectangular collar at the narrow end of the body of the lug and wh…
Created on: Monday 27th November 2023
Last updated: Monday 11th December 2023
Spatial data recorded.

Record ID: WMID-629B96
Object type: PURSE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy purse bar of Late Medieval to Post Medieval dating (AD 1450 to AD 1550). Around 50% of the purse bar is present, with one arm and the central block present. The rest is missing, presumed lost in antiquity. The arm are oval, near circular in cross-section. Beginning at the block, the arm has a stylised animal head with open jaws. Now quite worn and difficult to see, these take the form of a short length of the bar that is thickened and widened, with a V-shaped notch on the top of each, separating and defining a brow and muzzle. The rest of the…
Created on: Thursday 16th November 2023
Last updated: Thursday 16th November 2023
Spatial data recorded.

Record ID: WMID-C1AA16
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy dress hook (single sharp hooked eye), of Early Post Medieval dating (AD 1500 to AD 1600). Around 50% of the dress hook is present, with the hook and part of the trefoil openwork design incomplete. The hooked eye is irregular in plan, and rectangular in section. It is of an openwork design, with a large sub rectangular eye section. The openwork plate consists of a hatched Hungerford knot in a trefoil shape, with two undecorated pellets at the junction between the eye and the plate. The outer loops are incomplete. The reverse is undecorated. Th…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-F0E86E
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy possible African coin of probable Post Medieval dating (AD 1700 to AD 1900. Edges of the probable coin exhibit layers. Obverse: Probable negro head facing left, hoop earring, hair tied back to the right. Reverse: unclear. Diameter: 18.2 mm Thickness: 3.6 mm Weight: 4.0 g.
Created on: Monday 11th September 2023
Last updated: Monday 20th November 2023
Spatial data recorded.

Record ID: WMID-8C5E8B
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy half penny trade token, issued by Richard Whitmore of Stone in 1667. C.f. Williamson, Staffordshire, 72. p 1057. Diameter: 16.6 mm Thickness: 0.8 mm Weight: 0.8 g
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-2357D2
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy domed button of Early Post Medieval dating (AD 1500 to AD 1600). Around 50% of the button is present, consisting of the domed head. The shank is missing. The domed head is undecorated apart from a concentric circle around the base of the head. The back is flat. A scar is present where the shank should have been. It has a diameter of 17.9 mm and is 11.2 mm thick. It weighs 11.1 g. The button is a dark green colour with an even surface patina. Some iron corrosion products are present on the surface.
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-791387
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete curved copper alloy fragment of probable Post Medieval dating (AD 1500 to AD 1800). The fragment is sub rectangular in shape, and is convex. The lower edge is complete, the other edges incomplete with post-depositional patinated breaks. A rim is present along the lower edge. The outer surface is smooth, the inner rough and unpolished. The curvature is consistent with a 3 cm rim diameter and 20% of the rim is present. It measure 13.5 mm in length, 19.2 mm wide and 2.9 mm thick. It weighs 2.9 g. The fragment is a dark green colour, with an even surface patina.  The…
Created on: Wednesday 19th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

• 

  Image not taken

Record ID: WMID-6813F6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete post-Medieval copper-alloy hooked strap-fitting for a sword-belt (c. 1600-c. 1700). The main body of the fitting is sub-circular in plan, convex at the front and concave at the rear. The front of the main body has three vertical facets. Curvilinear decoration is visible on the front. At one end a rounded knop is pierced, with an internal diameter of 2.6 mm. Between the knop and main body there is a single transverse ridge. The rearwards projecting hook is 'D'-shaped in cross-section and incomplete. Between the hook and main body is a pair of transverse ridge…
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-661AAC
Object type: CUFF LINK
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy cuff link element of Post-Medieval dating (AD 1662-1700). 'Crown and Heart' Form 1, Type A (Lewis (2013). The object is sub-circular due to breaks across the upper portion. The outer edges are downturned. The button is decorated in relief with a design of a crown above two hearts on a crosshatched background. The back is flat with an integral attachment It has a diameter of 16.7 mm and is 4.9 mm thick. It weighs 1.0 g. The element is a mid to dark green colour with an even surface patina.  The design on this object is usually associ…
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-654385
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy zoomorphic strap fitting or belt hook, of Post Medieval dating dating (1500 to 1600 AD). Around 50% of the strap fitting is present. It was originally S shaped with an oval cross section. A zoomorphic or animal head terminal is present at one end, with a rounded nose, and circular eye. At the centre of the S is a 'waisted' area comprising a central flower design, with leaves pointing away on both sides. The strap fitting measures 29.2 mm in length, 19.2 mm wide and 4.6 mm thick. It weighs 4.9 g. The…
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-2D4EAC
Object type: SPUR
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy spur fragment of Post Medieval dating (AD 1600 to AD 1800). Less than 25% of the spur is present, part of the spur arm.  The spur arm is rectangular in shape and flat in cross section. No decoration is present on either side. It measures 52.3 mm in length, 7.0 mm wide and 3.8 mm thick. It weighs 7.7 g. The spur is a dark green to brown colour with an even surface patina.
Created on: Monday 3rd July 2023
Last updated: Monday 3rd July 2023
Spatial data recorded.

Record ID: WMID-EAA268
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A heavily worn copper alloy penny of George III (AD 1760 to AD 1820), dating to AD 1797. Minted at Birmingham, at the Soho Mint. C.f. Spink 3777. Diameter: 34.9 mm Thickness: 2.8 mm Weight: 18.8 g
Created on: Friday 30th June 2023
Last updated: Friday 30th June 2023
Spatial data recorded.