Back to simple search | Back to advanced search

    You searched for:

    • Broad period: MEDIEVAL
    • Created by: Amy Downes

  • Thumbnail image of SWYOR-2C2635

Record ID: SWYOR-2C2635
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Medieval harness mount dating from AD 1200 - 1400. The mount has a main body which is square and which is decorated with a recessed circles within which is a Occitan cross (or Cross of Toulouse) in relief. This cross is hollow, has flaring arms, and each arm terminates in three widely spaced roundels. This design would probably have been enamelled, but no traces remain. Projecting from each end of the main body of the mount, and integral to it, is a slightly trapezoidal projection containing two empty rivet holes. Extending from the far end of one of these projections is…
Created on: Thursday 2nd August 2018
Last updated: Sunday 5th August 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-2BC072

Record ID: SWYOR-2BC072
Object type: COIN
Broad period: MEDIEVAL
County: Wakefield
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver coin; a round farthing of Edward II (AD 1307 - 1327), Class 11, dating from AD 1310 - 1314. Withers' Type 30b. Mint of London. The coin is 12.5mm diameter, 0.5mm thick and 0.3g. See North number 1070/1 on page 38 of Volume II (1991), and Withers (2005), page 33 of Halfpennies and Farthings; Edward I and II.
Created on: Thursday 2nd August 2018
Last updated: Monday 13th August 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-2BB5DF

Record ID: SWYOR-2BB5DF
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Medieval rotary key dating from about AD 1200 - 1500. Ony the bow survives. It is quatrefoil with projecting ridges in the angles between the lobes, and circular holes through each lobe. The hole in the outmost lob is larger than the others and worn, suggesting the key was suspended from this point. A hollow or depression in the centre of the bow is filled with concretion, though the cavity does not appears to extend through the bow into a hole. The lobe adjacent to the stem is broken and the stem and bit are missing. The key has a glossy green patina. It is 38.1mm long…
Created on: Thursday 2nd August 2018
Last updated: Monday 13th August 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-CB6ACB

Record ID: SWYOR-CB6ACB
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver coin; a halfpenny probably of Richard II (AD 1377-1399) dating from AD 1377 - 1399, of Withers Type 5b, but perhaps of Henry IV (AD 1399 - 1413). See Withers and Withers (2005) Halfpennies and Farthings; Edward III and Richard II, page 51. The coin is incomplete. It is 13.6mm diameter, 0.6mm thick and 0.5g.
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-CA9B27

Record ID: SWYOR-CA9B27
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval coin; a penny of Edward I (AD 1272 - 1307), Class 4e dating from AD 1287 - 1289. Mint of London. See North number 1027. The coin is 20.4mm diameter, 0.8m thick and 1.2g.
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-CA8207

Record ID: SWYOR-CA8207
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval coin; a penny of Edward I (AD 1272 - 1307), Probably Class 2 dating from AD 1279 - 1280, minted at London. The coin is 18.1mm diameter, 0.5mm thick and 0.6g. See North number 1014 or 1015 on page 28 of Volume II (1991). The Ns are reverse barred.
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-CA479D

Record ID: SWYOR-CA479D
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver coin; a voided short cross cut halfpenny of Henry II, Richard I or John dating from AD 1180 - 1204, class 1-4, minted at a mint beginning with L, probably London. The coin is incomplete. It is 15.9mm long, 9.8mm wide and 0.6mm thick. 0.46g.
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-CA2A5A

Record ID: SWYOR-CA2A5A
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver coin; a voided long cross penny of Henry III (AD 1216 - 1272), class 5b dating from AD 1250 - 1256, minted by Ian at Canterbury. See North number 992. The coin is 17.7mm diameter, 0.8mm thick and 1.2g.
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-CA0A13

Record ID: SWYOR-CA0A13
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval coin; a sovereign penny of Henry VII (AD 1485 - 1509), dating from AD 1485 - 1500, issued at York under Archbishop Rotherham, one pillar on throne, rosette stops. See North number 1728. There are keys on the reverse under the shield. A small part of the coin is missing. It is 15.4mm diameter, 0.7mm thick and 0.6g.
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-C96B42

Record ID: SWYOR-C96B42
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval coin; a short cross cut farthing of Richard I, John or Henry III, dating from AD 1189 - 1247, Class 2-8, probably minted at Canterbury. The coin is 10.5mm long, 8.2mm wide and 0.6mm thick. 0.24g.
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-C94A19

Record ID: SWYOR-C94A19
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast lead alloy seal matrix of medieval date, about AD 1200 - 1400. The seal is a pointed oval or vessica shape with the remains of a perforated lug set at one end in the centre of the reverse. Just over half of the seal survives. It may have been broken deliberately to decommission it. The reverse is decorated with a moulded fleur de lis, with the handle lug at the base. The front face bears a central motif of a cross surmounting a long, pointed oval object, surrounded by the legend "+S'HE[...]I.LES" probably representing a personal seal of an individual. The impression…
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-C9179A

Record ID: SWYOR-C9179A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy, single loop, medieval buckle, dating from about AD 1350-1400. The frame is of an elongated D shape (stirrup shaped) and has a hemispherical knop with a raised collar projecting from the centre of the outer edge. The strap bar is narrowed and offset. There are transverse ridges across the frame, one on each side, near the bar. The reverse is flat. The pin is copper alloy wire and is looped round the bar. The plate is missing. The buckle has a dark grey patina while the pin is a much brighter green. They have been given a surface treatment post recovery. The buckle i…
Created on: Monday 16th July 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-15B7B5

Record ID: SWYOR-15B7B5
Object type: COIN
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A Medieval Scottish coin; a cut half penny of William I (AD 1165 - 1214) or Alexander II (AD 1214 - 1249), Short Cross and Stars coinage dating from AD 1195 - 1249. See Spink (2003) Coins of Scotland, Ireland and the Islands, number 5027 - 5038. Mint unknown. The coin is 18.4mm long, 8.6mm wide and 0.6mm thick. 0.5g.
Created on: Sunday 8th July 2018
Last updated: Wednesday 18th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-15AF08

Record ID: SWYOR-15AF08
Object type: COIN
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A medieval silver coin: a cut farthing of Henry II (AD 1154-1189), probably class 1b dating from AD 1180 - 1185, Oxford mint, moneyer unknown. It is 13.9mm long, 9.8mm wide and 0.7mm thick. 0.3g. See North (1994), volume 1, number 963.
Created on: Sunday 8th July 2018
Last updated: Wednesday 18th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-15A92B

Record ID: SWYOR-15A92B
Object type: BUCKLE
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy, single loop, D-shaped buckle with an expanded outer edge and a narrowed strap bar (Meols type 1), dating from the Medieval period, probably AD 1200 - 1400. The pin is missing. The buckle has a grey green patina. It is 19mm wide, 14.1mm long and 3mm thick. 2.2g. Similar buckles are illustrated in Whitehead, 2003, Buckles 1250 - 1800, page 19, numbers 52 - 54. See also Meols page 84.
Created on: Sunday 8th July 2018
Last updated: Tuesday 17th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-15822C

Record ID: SWYOR-15822C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A Medieval single loop, D-shaped copper alloy buckle with a lipped frame and a narrowed and offset strap bar, of Meols type 4, dating from AD 1350 - 1450. The upper side of the frame is bevelled and the pointed and projecting lip has a central pin notch. The pin and plate are missing. It is 17.5mm long, 24.3mm wide and 4.8mm thick. It weighs 3.93gm. Similar buckles are illustrated in Griffiths, Philpott and Egan, 2007, Meols: The Archaeology of the North Wirral Coast, page 91.
Created on: Sunday 8th July 2018
Last updated: Tuesday 17th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-157D56

Record ID: SWYOR-157D56
Object type: BUCKLE
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy, single loop, D-shaped buckle (Meols type 1), dating from the Medieval period, probably AD 1200 - 1400. The pin is missing. The buckle has a smooth, grey patina. It is 21.6mm long, 26.7mm wide and 2.8mm thick. It weighs 3.07gm. This type of buckle is ilustrated in Grffiths, Philpotts and Egan, 2007, Meols: The Archaeology of the North Wirral Coat, page 84.
Created on: Sunday 8th July 2018
Last updated: Tuesday 17th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-1578D1

Record ID: SWYOR-1578D1
Object type: STRAP END
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy strap end, dating from the Medieval period, about AD 1200 - 1400. It consists of two sub-rectangular plates, which taper from a square attachment end to a rounded outer end, and are held together by two copper alloy rivets, one at teach end. Both rivets remain in place. The strap end is undecorated and has a patchy, smooth, green patina. It is 20.6mm long, 8.3mm wide and 2.7mm thick. It weighs 1.42gm. Strap ends of this type are illustrated in Egan, 1991, Dress Accessories c. 1150 - 1450, page 133, number 609, though the rivet arrangement is different.
Created on: Sunday 8th July 2018
Last updated: Tuesday 17th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-1573F2

Record ID: SWYOR-1573F2
Object type: COIN
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval coin; a corroded and illegible round farthing dating from AD 1272 - 1509. The coin is 12.1mm diameter, 0.6mm thick and 0.3g. Surface corrosion obscures the obverse completely. Mint of London probably.
Created on: Sunday 8th July 2018
Last updated: Wednesday 18th July 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-151BCA

Record ID: SWYOR-151BCA
Object type: STRAP END
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Medieval globular or spherical strap-end dating from about AD 1200 - 1500. The strap end is a sub-spherical knop with a flattened end and a projecting sub-rectangular sectioned shaft which splits into two plates, which have rounded ends with a corroded rivet hole through both plates. It is 16.3mm long, 11.5mm diameter and 5.2g. Such objects are not readily paralleled in the literature, but a number have been recorded on this database, e.g. WMID-498871, WAW-414503, NLM-74B5E9, NLM-26AF51 and SF-264006.
Created on: Sunday 8th July 2018
Last updated: Wednesday 18th July 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 3,331
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 3,779
  • Mean quantity: 1.134
  • Maximum: 71

Filter your search

Institution

1 - 20 of 3,331 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.