Record ID: HAMP-B2D455
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete cast copper-alloy swivel of medieval to post-medieval date. Each loop is broadly D shaped in plan and rectangular in cross section, one loop has been bent upwards slightly. Each loop expands towards the perforated oval bezel. The loops are connected by a copper-alloy rivet which widens on one side, it has a flattened top on the other side. The swivel has a mid green patina with the red-brown underlying metal visible in places.
Created on: Thursday 20th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-B0B771
Object type: STUD
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded cast copper-alloy stud of probable medieval date. The stud is rectangular in plan and cross-section with an integral circular cross-sectioned shank central on the lower surface. The stud is slightly concave, the two tips are both bent upwards slightly. The surface is worn and corroded; the decoration is indiscernible. The metal has corroded to a red/brown colour.
Created on: Thursday 20th September 2012
Last updated: Thursday 20th September 2012
Spatial data recorded.

Record ID: HAMP-AF2BA8
Object type: MOUNT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete cast copper-alloy probable mount of probable medieval date. The mount is broadly oval in plan and D shaped in cross section. The mount is convex and domed. In the centre of the mount is a circular perforation (3.85mm in diameter). The reverse is recessed and undecorated.
Created on: Thursday 20th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-AE6C66
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete and damaged copper-alloy medieval sheet buckle plate. Half of the plate survives; it would have been created from a broadly rectangular strip twice the length. It is broadly trapezoidal and narrows slightly at the attachment end (W.: 15.6mm). The other end is recessed to accommodate the frame and has broken at this weak point. There is a central notch for the pin at this end; the tabs curve round, one is incomplete. A central perforation towards the attachment end would have held an iron pin judging by the orange/brown corrosion product around it on the lower surface. Th…
Created on: Thursday 20th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-ADAF44
Object type: RIVET
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete medieval to post-medieval sheet copper-alloy rivet. The rivet is made from a kite-shaped piece of copper-alloy rolled into a cone. The top is flattened to form a head. The function for these objects is unclear. However, it is thought that they may have been used for repairing metal vessels.
Created on: Thursday 20th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-9EAFF5
Object type: STRAP END
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A sheet plate from a copper-alloy medieval composite strap-end. The plate is trapezoidal in form, narrowing gradually to an tapered end with flattened tip. The second plate is missing. The strap-end is held together by a pair of rivets, both survive. The object has corroded to a variable mid/dark-green colour. It has been bent upwards slightly. It can be dated to the 13th to 14th century and examples can be found illustrated in Egan and Pritchard (1991, 147; ref. 698) and also Griffiths et al. (2007, 134-135; ref. 1552).
Created on: Wednesday 19th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-9E8285
Object type: STRAINER
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A damaged fragment of a copper-alloy strainer/skimmer plate of probable medieval/post-medieval date. Three pierced circular holes of slightly irregular outline are present plus at least six incomplete holes on the four broken edges. Various more complete plates can be found on the database (e.g. WILT-0F6255, GLO-068886 and BH-F41444) and they seem to commonly break up along the perforations. Evidence from excavations in London suggests that most of these artefacts probably date from later medieval to early post-medieval period (see Egan 1998, 155-158). This fragment has corroded to …
Created on: Wednesday 19th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-9D4D72
Object type: RIVET
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete medieval to post-medieval sheet copper-alloy rivet. The rivet is made from a kite-shaped piece of copper-alloy rolled into a cone. The top is flattened to form a head. The function for these objects is unclear. However, it is thought that they may have been used for repairing metal vessels.
Created on: Wednesday 19th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-9A07C5
Object type: MOUNT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete medieval copper-alloy bar mount with separate rivets. The bar mount is rectangular in plan and trapezoidal in cross section. There are two complete copper-alloy rivets within the mount. A similar example can be found in Griffiths et al 2007, page 126 no 1220.
Created on: Wednesday 19th September 2012
Last updated: Wednesday 26th September 2012
Spatial data recorded.

Record ID: HAMP-713AA0
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A broadly circular mount of medieval date, abraded at the circumference. The mount is of copper-alloy sheet, perforated near the edge at opposing points. One surface is tinned; the other is covered in fine diagonal striations. The perforations are through the coated surface but no rivets survive. For mounts of similar construction see Egan and Pritchard (1991, 166; fig. 107). The edge has been bent slightly as a result of old damage. A similar example can be found on the database: HAMP-4C4148.
Created on: Wednesday 5th September 2012
Last updated: Thursday 20th September 2012
Spatial data recorded.

Record ID: HAMP-61BD97
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A very worn, slightly clipped early 14th-century silver medieval penny of Edward I, London mint (AD 1306-1307; Class 10cf2a-cf3)
Created on: Tuesday 4th September 2012
Last updated: Wednesday 12th September 2012
Spatial data recorded. This findspot is known as 'Hartley Wintney', grid reference and parish protected.

Record ID: HAMP-602488
Object type: VESSEL
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy medieval to post-medieval chafing dish drop handle. In plan, the handle frame is sub-trapezoidal with rounded corners, the frame is rectangular in cross-section. It has three concave sides and one shorter straight side that around which is a copper-alloy attachment lug. The attachment lug is sub-oval in plan and rectangular in cross-section (25.4 by 15.5 by 9.3mm). It has a short circular rivet with shoulders above at the end that secured it to the side of the dish. The frame has a dark-grey patina with some areas of green corrosion product, as is the lug. There…
Created on: Tuesday 4th September 2012
Last updated: Sunday 9th June 2019
Spatial data recorded. This findspot is known as 'Hartley Wintney', grid reference and parish protected.

Record ID: HAMP-A4BAD0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy probable buckle of possible Medieval date. The buckle is rectangular in cross section. The artefact has a central perforation and expands from the centre towards two projections. The artefact expands from the centre forming two concave recesses one on either side. The right expansion is broadly semi-circular in plan and is decorated with six radiating ridges seperated by seven broadly triangular recesses. The radiating ridges expand outwards from the central perforation. the left projection expands to form two perforations which appear to have two old b…
Created on: Thursday 2nd August 2012
Last updated: Tuesday 7th August 2012
Spatial data recorded.

Record ID: HAMP-1674F4
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn and clipped 15th-century silver medieval halfpenny possibly of Henry VI or Edward IV (1422 - 1483). This coin has been pierced at 4 o clock on the obverse.
Created on: Thursday 26th July 2012
Last updated: Monday 26th November 2018
Spatial data recorded.

Record ID: HAMP-1634B5
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A slightly bent silver 14th-century medieval farthing of Edward I or Edward II, struck at London (1300 - 1317 AD; Class 10; Withers type 30)
Created on: Thursday 26th July 2012
Last updated: Tuesday 7th August 2012
Spatial data recorded.

Record ID: HAMP-161238
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn 13th-century Medieval silver penny of Edward I or Edward II, Classes 10a5 - 11a, Durham mint, possibly class 11a issued under bishop Bek (1303 - 1312 AD)
Created on: Thursday 26th July 2012
Last updated: Tuesday 7th August 2012
Spatial data recorded.

Record ID: HAMP-15F0B0
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A slightly worn 13th-century silver medieval penny of Henry III, struck by Alein at Canterbury (Long voided cross class Vg - Vh; 1258 - 1275 AD).
Created on: Thursday 26th July 2012
Last updated: Tuesday 7th August 2012
Spatial data recorded.

Record ID: HAMP-1591B4
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn and clipped 15th-century silver medieval penny possibly of Henry VI or Edward IV, Durham mint (1422 - 1483).
Created on: Thursday 26th July 2012
Last updated: Tuesday 7th August 2012
Spatial data recorded.

Record ID: HAMP-156857
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn 13th-century Medieval silver penny of Edward I, Classes 1 - 9, London mint (1279 - 1300 AD). This coin has suffered slight circumferential losses.
Created on: Thursday 26th July 2012
Last updated: Tuesday 7th August 2012
Spatial data recorded.

Record ID: HAMP-153241
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn late 12th-century or early 13th-century silver medieval cut halfpenny of uncertain ruler, Walter moneyer, uncertain mint (Short voided cross Classes 1-8; probably Classes 5c-6a; 1180-1247 AD).
Created on: Thursday 26th July 2012
Last updated: Tuesday 7th August 2012
Spatial data recorded.