Record ID: HAMP-E4E444
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete copper alloy medieval to post medival strap fitting or button. The head of the fitting is biconvex in shape, and each half of the head has eight flat sides. There is a central knop on the top of the head. The stem and loop are integral and extend from the flat back of the head. The stem is rectangular in cross section, and widens slightly towards the loop.The loop is circular and measures 4.1mm in diameter. There is no decoration on the fitting, which has a dark green patina. The fitting measures 24.8mm in length, and 10.9mm in diameter. The stem measures 13.9mm in length, …
Created on: Friday 1st April 2016
Last updated: Monday 4th April 2016
Spatial data recorded. This findspot is known as 'Buriton', grid reference and parish protected.

Record ID: HAMP-E46A21
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A medieval silver farthing of Edward I-III (1282-1377), type 28-32 dating to 1300-44, struck on an oval flan. Mint of London.
Created on: Friday 1st April 2016
Last updated: Monday 4th April 2016
Spatial data recorded. This findspot is known as 'Buriton', grid reference and parish protected.

Record ID: HAMP-D252E3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete medieval copper alloy buckle with composite plate. The buckle frame is oval in shape, with the outer edge widening and forming a triangular point in the centre. The outer edges of the frame are bevelled, and the frame is triangular in cross section. The forked spacer is covered by a rectangular copper alloy sheet folded over. This measures 13.1mm by 14.4mm. It has a central notch close to the pin bar for the pin to sit in. At the attachment end there is rectangular recess with iron corrosion in. There are patches of iron staining across the plate and on the pin. The pin is …
Created on: Thursday 31st March 2016
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Buriton', grid reference and parish protected.

Record ID: HAMP-D14DD5
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A silver medieval penny of Edward III (1327-77) dating from the pre-treaty period (4th coinage), series G (1356-1361). Mint of Durham, standard type 'G', a-g. Reference: North 1215-1220.
Created on: Thursday 31st March 2016
Last updated: Monday 4th April 2016
Spatial data recorded. This findspot is known as 'Buriton', grid reference and parish protected.

Record ID: HAMP-3D00D7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper alloy buckle with plate. The buckle frame is trapeziodal shaped, the outer edge is recessed slightly from the frame and measures 20.1mm in width, the plate bar is narrower at 17.1mm. The outer edge of the frame is bowed slightly, and there is a knop at each outer corner. The buckle is sub rectangular in cross section. The plate is formed of a copper alloy sheet that is wrapped round the plate bar, it is rectangular on the front measuring 20.8mm by 14.5mm. It recesses at the bar and narrows to 10.9mm on the reverse. There are two rivets still in situ at the edge of th…
Created on: Thursday 24th March 2016
Last updated: Monday 4th April 2016
Spatial data recorded. This findspot is known as 'Wylye', grid reference and parish protected.

Record ID: HAMP-3C8DFD
Object type: STRAP END
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete medieval copper alloy strap end. The strap end consists of two rectangular plates, and is possibly composite with a forked spacer inbetween. The plates narrow slightly towards the terminal end which is angled and ends in a pointed protrusion. At the terminal end above the pertrusion is a rivet still in situ. This is slightly off centre. At the attachment end there is a circular hole in both sheets for the seperate rivet, this is now missing. One end is missing around the rivet hole. There is no decoration on the strap end, which is a dark green colour with patches of lig…
Created on: Thursday 24th March 2016
Last updated: Monday 4th April 2016
Spatial data recorded. This findspot is known as 'Wylye', grid reference and parish protected.

Record ID: HAMP-C8F226
Object type: BROOCH
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper alloy medieval diamond- or square-shaped brooch, missing its pin. The frame is decorated with a border of punched rings running along the centre of each edge. These edges are bevelled and trapezoidal in cross-section. On one inside corner of the frame is a hole where the pin would have been attached; on the reverse is the remains of an iron rivet. There is no decoration on the reverse of the brooch. The object has a dark green patina with light brown patches of corrosion. The brooch frame is 3.1mm wide and 1.7mm thick. The brooch measures 16.1mm by 16.4mm, and wei…
Created on: Thursday 11th February 2016
Last updated: Monday 15th February 2016
Spatial data recorded. This findspot is known as 'Ropley', grid reference and parish protected.

Record ID: HAMP-C8522E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete medieval or post-medieval copper alloy double loop annular buckle, missing its pin. The buckle is decorated with moulded scalloping around the outer edge which is c.4.4mm wide. The moulded decoration resembles five flower petals. The central pin bar is narrower at 1.9mm and is sub triangular in cross section. The buckle has a brown green patina. The buckle measures 27.3mm in length, 24.8mm in width, and is 2.2mm thick. The buckle weighs 4.11g. The buckle is similar to Whitehead 1996, p.39 nos. 272 and 273, which he dates from c.1450-1550.
Created on: Thursday 11th February 2016
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Horndean', grid reference and parish protected.

Record ID: HAMP-8B6BA2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A medieval copper alloy buckle plate. The plate consists of a rectangular sheet of metal, folded widthways to attach to the buckle. The fold on the reverse of the plate is approximately half the length of the plate, measuring 12.3mm in length. A central rectangular slot has been cut out on both sides for the attachment. There is iron staining within this slot suggesting the buckle pin was made of iron. At the opposite end on the longer plate there is a rivet hole with the iron rivet still in situ. Close to the slot there are two possible incised V-shapes, suggesting possible decoratio…
Created on: Wednesday 27th January 2016
Last updated: Thursday 4th February 2016
Spatial data recorded. This findspot is known as 'East Meon', grid reference and parish protected.

Record ID: HAMP-8AEAAB
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
A medieval to post-medieval copper-alloy double-looped buckle frame, missing its pin. The loops are oval and thin rectangular shaped in cross-section. The frame is angled. On both loops there is a central notch for the missing pin. The pin bar is offset, narrowed and circular in cross section. There is no decoration on the frame. The buckle frame has a green brown patina. The frame measures 26.3mm in length, 21.1mm in width, and weighs 3.45g. It is similar to an iron buckle illustrated by Egan (1991, 85; no. 347) which dates from c.1350-1400, although a later date cannot be ruled o…
Created on: Wednesday 27th January 2016
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'East Meon', grid reference and parish protected.

Record ID: HAMP-90E1F4
Object type: BUCKLE
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Published
An incomplete copper-alloy medieval buckle with trapezoidal frame and integral plate. The frame has been folded over itself. The two outer corners of the frame have a rounded knop. The frame is oval in cross section and is 2.2mm thick. The frame is 18.9mm at the longer end. The plate is sub triangular in shape, at the frame end there is a circular hole which has abraded through at the frame in an old break. This would have originally held the pin, which is now missing. There is a rivet hole beside this with the iron rivet still in situ. The other end is also broken, the curved remains…
Created on: Friday 15th January 2016
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'Harting', grid reference and parish protected.

Record ID: HAMP-667778
Object type: PURSE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete medieval purse hanger or arched pendent mount. This is a three-arched example consisting of a central inverted keyhole-shaped opening flanked by an open semi-circle either side. At the junctions between the arches are diagonal moulded projections. The short horizontal bar at the top of the central opening is worn from use; originally this would have attached to a suspension loop. At both terminal ends there is a knop flanked by a vertical moulding; each would have held a suspension loop in place. Another vertical moulding flanks the end of the semi-circle. On the inside of …
Created on: Wednesday 13th January 2016
Last updated: Friday 27th April 2018
Spatial data recorded. This findspot is known as 'Coombe Bissett', grid reference and parish protected.

Record ID: HAMP-65B4DD
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Medieval copper alloy (c.1270-1350) single plate strap end with hook. The plate is rectangular and has three rivet holes longitudinally arranged. Extending from one of the short ends is a curved hook which terminates in an old break as it begins to curve. One rivet hole is close to the hook-end; the rivet here is still in place. The other two rivets are situated at the other end of the plate; one is still in place and retains a sheet rove while that flanking the short edge is missing. There is no decoration on the strap end. The strap end measures 33.2mm in length, 5.5m…
Created on: Wednesday 13th January 2016
Last updated: Thursday 4th February 2016
Spatial data recorded. This findspot is known as 'Coombe Bissett', grid reference and parish protected.

Record ID: HAMP-63DF61
Object type: STRAP END
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Medieval (1250-1450) sheet copper alloy, tongue-shaped (with one short edge being curved) strap-end. It is engraved with zigzags longitudinally arranged along the centre (traces of gilding are visible here) and along the edges of the upper surface. The curved end has been folded over and the edge opposite has a central, separate rivet still in place. There is no decoration on the reverse. The strap end is 31.3mm in length, 14.3mm in width, and 0.8mm in thickness. The strap end weighs 2.51g.
Created on: Wednesday 13th January 2016
Last updated: Thursday 4th February 2016
Spatial data recorded. This findspot is known as 'Coombe Bissett', grid reference and parish protected.

Record ID: HAMP-62B31E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Medieval copper alloy buckle plate dating from 1250-1450. The plate consists of a rectangular sheet of metal which would have folded over at one short aned to curl around the buckle; the plate is now broken along this edge. The plate is recessed for the pin. There is a central rivet hole at the other end of the plate, the rivet is missing. The upper surface is decorated with a double line of punched circles running along the edge of the plate. The reverse is undecorated. The buckle plate measures 28.5mm in length, 13.7mm in width, and is 0.6mm thick. It is 1.29g in weig…
Created on: Wednesday 13th January 2016
Last updated: Thursday 4th February 2016
Spatial data recorded. This findspot is known as 'Coombe Bissett', grid reference and parish protected.

Record ID: HAMP-018A64
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete medieval to post-medieval (1350-1650) copper alloy double-loop annular buckle frame missing a pin. The frame is triangular in cross-section, being flat to the underside with an angled upper edge, and has a central bar rectangular in cross-section (1.1x3.3mm). The frame has no decoration. It measures 29.7mm in diameter, 3.3mm in thickness and weighs 5.54g. There are traces of iron staining along the central bar.
Created on: Tuesday 15th December 2015
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: HAMP-00EA9D
Object type: VESSEL
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A damaged but complete cast lead vessel which has been squashed almost flat. The vessel would have originally been semi circular in cross section. The vessel flares out at its sides, and is flat on one side, this would have been originally attached to a vertical surface. There is a flat raised rib with prominent edges along the lower rim of the vessel, and an incised line flanking the actual rim. The vessel is a grey white colour At the base the vessel measures 36.6mm by 17.7mm. The top measures 58.1mm by 27.1mm. The vessel is 42.1mm in height. The vessel weighs 79.25g. Robert W…
Created on: Tuesday 15th December 2015
Last updated: Wednesday 1st May 2019
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: HAMP-0075C6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete medieval (1200-1400) copper alloy buckle plate, consisting of the upper plate only and missing two rivets. The sheet-metal plate (0.6mm thick) is rectangular in shape with a rectangular cut-out at one short end and a smaller and decorative triangular cut out at the opposite end. A rivet hole (0.9mm diameter, pushed through from front to back) is in each corner to either side of the triangular cut-out. The long edge either side of the rivet hole is decorated with two smaller trianglular indentations. The areas of buckle plate to either side of the larger rectangular cut-…
Created on: Tuesday 15th December 2015
Last updated: Friday 18th December 2015
Spatial data recorded. This findspot is known as 'Wonston', grid reference and parish protected.

Record ID: HAMP-585EFB
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A medieval (1200-1400) copper alloy harness pendant hanger, for the suspension of a harness pendant. The object is T-shaped consisting of a long bar D-shaped in cross-section with a short arm (triangular in cross-section) projecting from the centre of one long edge. From this arm extend two loops, containing iron corrosion. This would have held the axis bar on which the pendant would have been suspended. On the reverse of the mount (which is flat) there are two integral rivets c.2mm in diameter, one at each end. Much of the original patina is lost but traces of gilding survive, in pa…
Created on: Wednesday 25th November 2015
Last updated: Friday 15th September 2017
Spatial data recorded. This findspot is known as 'Thruxton', grid reference and parish protected.

Record ID: HAMP-44701C
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete medieval base silver farthing of Edward I (1272-1307), Edward II (1307-27) or Edward III (1327-72). Class 10-15 (Withers 28-32), minted in London, dating to 1300-1344. A third of the coin is missing. Reference: Withers 28-32.
Created on: Tuesday 24th November 2015
Last updated: Tuesday 24th November 2015
Spatial data recorded. This findspot is known as 'Thruxton', grid reference and parish protected.