Record ID: WILT-0CB640
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A silver Medieval cut halfpenny of William I. Moneyer Godric, uncertain mint (North 844; AD 1072-1074).
Created on: Monday 12th May 2014
Last updated: Monday 23rd June 2014
Spatial data recorded. This findspot is known as 'Salisbury', grid reference and parish protected.

Record ID: WILT-30C7C6
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy unidentified object of probable Medieval or post-Medieval date. It is 35.55 mm in length, 33.25 mm in width, 20.15 mm in depth and weighs 35.81 grams. It has a large circular cavity in its base which suggests it was placed on the end of another object. The object is in the form of the torso of a bearded man. The man has two proportionally short and thin arms which jut out from the body so that there is a gap between the elbow and the sides of the body. The arms are bent at almost 90 degrees. He holds a vessel in his right hand. His left hand is held against his body. On…
Created on: Thursday 20th June 2013
Last updated: Friday 28th June 2013
Spatial data recorded. This findspot is known as 'Rushall', grid reference and parish protected.

Record ID: WILT-326644
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper-alloy seal matrix of Medieval date. The seal matrix is pointed oval in plan, with a raised band running down the centre on the reverse with a semi-circular lug at one end drilled with a circular perforation. The central device has two registers: the upper has Mary holding the infant Christ and the lower register contains a man facing left holding keys. The figures are separated by triangular and rectangular shapes which appear to represent church architecture. There is a a pellet border separating the device from the inscription. There is also a pellet border around th…
Created on: Thursday 20th June 2013
Last updated: Friday 28th June 2013
Spatial data recorded. This findspot is known as 'Rushall', grid reference and parish protected.

Record ID: WILT-C6A335
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete silver medieval penny of Henry I, uncertain mint and moneyer either Eadweard or Godwine, (AD 1117-1119; North 866).
Created on: Monday 2nd December 2013
Last updated: Wednesday 12th February 2014
Spatial data recorded. This findspot is known as 'Salisbury', grid reference and parish protected.

Record ID: WILT-C74D21
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An silver medieval penny of Edward I, London mint (AD 1280-1291; Class 3-5).
Created on: Monday 2nd December 2013
Last updated: Wednesday 12th February 2014
Spatial data recorded. This findspot is known as 'Salisbury', grid reference and parish protected.

Record ID: WILT-DEDD81
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper-alloy Medieval/Post-Medieval (AD 1200-1800) seal matrix with a circular die and a hexagonally faceted handle, terminating in a pierced lozenge above a single-ridged moulded collar. The object stands 21.85mm in height and weighs 8.72g. The die measures 16.90mm in diameter. Th die bears a single 'R' with a plant on each side. There is a circular indentation on the top side of the die aligned with the top of the 'R' so that the user could align the seal matrix correctly. For a parallel die design see BUC-80A155. For a parallel handle design see WILT-AD32B6.
Created on: Tuesday 3rd December 2013
Last updated: Monday 20th January 2014
Spatial data recorded. This findspot is known as 'Quarley', grid reference and parish protected.

Record ID: WILT-DF74E2
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A silver medieval short-cross cut farthing. Uncertain mint and uncertain moneyer (AD 1180-1247; North 962-982)
Created on: Tuesday 3rd December 2013
Last updated: Monday 20th January 2014
Spatial data recorded. This findspot is known as 'Quarley', grid reference and parish protected.

Record ID: WILT-E0CE12
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper-alloy medieval to post-medieval (AD c1450-1550) single loop kidney shaped buckle, missing its pin and part of its plate. It has an expanded front flanked by two transverse triangular ridges. The strap bar is narrowed and offset, and the plate is still attached. This plate bends back on itself over the strap bar and narrows from 20.40mm to 10.05mm. It has a recess for the pin and has broken off in line with the hole for the rivet. It is very similar in shape to Whitehead 'Buckles' no.117 but without the punched decoration or triangular pin notch. Overall the …
Created on: Tuesday 3rd December 2013
Last updated: Thursday 13th February 2014
Spatial data recorded.

Record ID: WILT-F10A25
Object type: VESSEL
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete, cast copper-alloy, vessel foot probably from a cauldron, skillet or ewer, of medieval or post medieval date. The top end has been broken off (an old break). The pot leg is broadly D-shaped in section, with a smooth flat back, and a fluted front consisting of 5 semi-circular ribs that run the length of the leg from top to foot. There is a horizontal ridge across the width of the front face near the break at the top. The leg expands in width (20.50mm to 26.00mm) and thickness (10.25mm to 14.00mm) from below this ridge to the bottom but appears to be completely straight…
Created on: Wednesday 4th December 2013
Last updated: Thursday 13th February 2014
Spatial data recorded.

Record ID: WILT-F17C94
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper-alloy medieval strap loop with an integral external rivet. The strap loop is bent out of shape but has a subrectangular frame. Overall it measures 13.75mm long, 11.85mm wide, 3.50mm thick and weighs 0.76g.
Created on: Wednesday 4th December 2013
Last updated: Thursday 13th February 2014
Spatial data recorded.

Record ID: WILT-F45E73
Object type: PURSE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper-alloy possible pendent frame from a late medieval (c1400-c1500) purse. The fragment is broken at both ends and is 45.45mm long, 8.20mm wide and 6.15mm thick. The frame fragment is curved gently and is broadly triangular in section with the inner edge extending slightly.
Created on: Wednesday 4th December 2013
Last updated: Thursday 13th February 2014
Spatial data recorded. This findspot is known as 'Rockbourne', grid reference and parish protected.

Record ID: WILT-08CAC3
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A silver medieval halfpenny or farthing probably of Edward III to Henry VII (AD 1351-1485). Uncertain initial mark and mint.
Created on: Thursday 5th December 2013
Last updated: Monday 20th January 2014
Spatial data recorded. This findspot is known as 'Quarley', grid reference and parish protected.

Record ID: WILT-09D621
Object type: KNIFE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
A copper-alloy end-cap from a medieval knife handle. It takes the form of a single narrow trapezoidal curved plate measuring 28.25mm in length, tapering in width from 8.20mm to 4.40mm, 1.45mm in thickness and weighing 1.13g. It has a small rectangular perforation 10.65mm from the narrow end which measures 3.80mm in length. The guard is slightly concave on the handle side. Compare Cowgill et al. 1987, especially no. 116. 14th century.
Created on: Thursday 5th December 2013
Last updated: Friday 2nd May 2014
Spatial data recorded.

Record ID: WILT-0A7E96
Object type: STRAP END
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper-alloy medieval to post-medieval (AD c1300-1500) strap end or buckle plate. The object is formed from a rectangular plate (0.45mm thick) with rounded terminals, which has been bent back on itself so that it now measures 10.95mm in length, 6.65mm in width, and 2.80mm in thickness. It weighs 0.36g. There are two circular perforations through it, the one closest to the bend being slightly larger than the other, perhaps indicative that this was for the pin of a buckle rather than a rivet hole. The smaller hole still contains part of the iron rivet on one side. The plate is otherwi…
Created on: Thursday 5th December 2013
Last updated: Thursday 13th February 2014
Spatial data recorded.

Record ID: WILT-1A6F63
Object type: MOUNT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete medieval or post-medieval possible mount or strap-end, broken at one end. It is formed from a flat broadly rectangular plate measuring 24.60mm long, 15.75mm wide and 0.85mm thick, and weighs 1.69g. The plate has two circular perforations near the top edge, presumably for attaching it to something else. Decoration consists of a raise zigzag border and a rectangle formed with a grooved border containing and X at the top left and bottom right corner. There is gilding on the upper surface, though most has worn off. The reverse is flat and undecorated.
Created on: Friday 6th December 2013
Last updated: Tuesday 9th August 2016
Spatial data recorded.

Record ID: WILT-98FF21
Object type: MOUNT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper-alloy medieval (AD c1250-c1350) D-section (cut 'wire') bar mount. It is sub-rectangular in plan and D-shaped in section, measuring 4.20mm long, 15.90mm wide and 1.70mm thick (3.20mm including the rivets), and weighing 0.55g. It has two rivets on the flat underside, one at each end. cf. Griffiths, et al 2001 p123 no.1201-1219.
Created on: Thursday 12th December 2013
Last updated: Thursday 13th February 2014
Spatial data recorded.

Record ID: WILT-99C7F3
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A silver medieval penny of Edward I. Class 2a. London mint. (Jan.-May AD 1280; North 1015).
Created on: Thursday 12th December 2013
Last updated: Monday 20th January 2014
Spatial data recorded. This findspot is known as 'Chilmark', grid reference and parish protected.

Record ID: WILT-9D5877
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper-alloy medieval (AD c1250-1400) single loop oval buckle, missing the pin and the buckle plate. The frame has a notched lip flanked by two pairs of transverse knops and is D-shaped in cross-section. The strap bar is narrowed and offset with a slight groove for the pin and is square in cross-section. Overall it measures 16.70mm long, 18.25mm wide and 4.30mm thick. It weighs 1.78g.
Created on: Thursday 12th December 2013
Last updated: Thursday 13th February 2014
Spatial data recorded. This findspot is known as 'Durnford', grid reference and parish protected.

Record ID: WILT-0C5965
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper-alloy medieval shield-shaped harness mount. The shield is of the common 'heater' shape, that is, with a flat top, and sides which curve steeply to a point. The mount features an integrally cast rivet projecting for c. 6.1mm from a centre position. The rivet has a hammered terminal and has a washer on it which suggests that the mount was attached to a soft or flexible material. The front of the mount is decorated heraldically thus: Gules, three lions passant guardant surrounded by red enamel. These are the arms of England before AD 1340, important to note other unofficial uses…
Created on: Monday 13th May 2013
Last updated: Thursday 10th September 2020
Spatial data recorded.

Record ID: WILT-0D7886
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper-alloy seal matrix of Medieval date. The seal matrix is pointed oval in plan, with a raised band running down the centre on the reverse with a semi-circular lug at one end drilled with a circular perforation. The central design has Mary seated holding the infant Christ, with a pellet border separating the device from the inscription. There is also a pellet border around the outer edge of the inscription. The inscription is located within the circumferential band on the front face and runs all the way round from 12 o'clock counter clockwise on the seal matrix. The inscriptio…
Created on: Monday 13th May 2013
Last updated: Monday 20th May 2013
Spatial data recorded.