Back to simple search | Back to advanced search

    You searched for:

    • Broad period: EARLY MEDIEVAL
    • Created by: Angie Bolton

  • Thumbnail image of WAW-9AAF3A

Record ID: WAW-9AAF3A
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) stirrup strap mount: The copper alloy mount is sub-triangular in plan, the sides are undulating. The tip narrows to a rounded blunt point which originally may have had a zoomorphic head. Below the tip there is a rivet hole with the remains of an iron rivet. The mount is decorated with a central tree-like device. The lower edge of the mount has two rivet holes; both have the traces of iron rivets. The reverse of the mount is undecorated and has, along the lower edge a shallow stepped flange. The surface is abraded and has a red/brown copper corroded sur…
Created on: Monday 12th November 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of WAW-7500F8

Record ID: WAW-7500F8
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Published Find published
An early-medieval silver penny of Coenwulf of Mercia (796-821), minted by Wihtred in an East Anglian mint, probably Ipswich (North 372; Cn 109; Naismith E12.7). Ref: North 1994: 95; Naismith 2011. The edges are crumpled, folded and incomplete. The reverse design is most similar to Naismith 12.7d with annulets instead of pellets within the cental box.
Created on: Friday 5th October 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of WAW-4C42B5

Record ID: WAW-4C42B5
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (9th century) cast copper alloy strap end. The strap end has two components, a long tapering shaft and a flat trapezoid which is the widest terminal and forms a '>' shape in profile, although one plate is only a trace. This terminal is abraded and is probably incomplete as the rivet holes are not visible. The shaft is sub-oval in section, and tapers to a slightly moulded probably zoomorphic terminal. The surface of the strap end is heavily abraded and the original surface has gone, therefore any potenital decoration is not visible. The strap end measures 44.28mm lon…
Created on: Friday 21st September 2018
Last updated: Monday 22nd October 2018
Spatial data recorded.


  • Thumbnail image of WAW-4AFF93

Record ID: WAW-4AFF93
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early-Medieval (Anglo-Saxon) buckle (c. 475-c. 800) buckle: In plan, the copper-alloy frame is an elongated sub oval shape, which has a slightly narrowed bar. The frame is oval in section. The strap bar is circular in cross-section and slightly narrowed. The pin has a semi-circular section which is slightly undulating on the upper surface. It is curled around the strap bar. The pin is a grey-brown coloured patina. The buckle measures 20.5mm long, 23.03mm wide, 8.93mm thick across the pin loop and weighs 6.5g. The buckle probably dates to the late 5th to 7th centuries. A similar buckl…
Created on: Friday 21st September 2018
Last updated: Monday 22nd October 2018
Spatial data recorded.


  • Thumbnail image of WAW-65B1D4

Record ID: WAW-65B1D4
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) stirrup strap mount: The copper alloy mount is sub-triangular in plan, the sides are slightly convex. The tip has a sub-trefoil knop with a circular perforation on the upper surface. The mount is decorated by a lion, facing right, and looking upwards, with one front paw raised. The tail is curled between the legs and in front of the body, curling towards the back of the head. The lower edge of the mount has two rivet holes, both have the traces of iron rivets. The reverse of the mount is undecorated and has, along the lower edge a shallow stepped flange. T…
Created on: Monday 10th September 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of WAW-410444

Record ID: WAW-410444
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Early Early-Medieval (late 5th to 6th centuries) saucer brooch made from gilded copper alloy. It is sub-circular and has abraded and incomplete edges. There is an incomplete lipped edge which is obliquely angled outwards. The front of the brooch is decorated with high-relief Style I animal motifs that are degenerate and are spiralling around a central undecorated boss. The motifs are formed by double-stranded curved blocks all within a high-relief border with transverse grooves. The angled rim has a fine linear groove running around the centre. The brooch appears to have a circular per…
Created on: Wednesday 15th August 2018
Last updated: Monday 8th October 2018
Spatial data recorded.


  • Thumbnail image of WAW-17C39A

Record ID: WAW-17C39A
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (c. AD 400 to 600) Small-Long Brooch: The cast copper alloy brooch is incomplete, only the head-plate remains which has a flat semi-circular knops on the sides and upper edges. The bow protrudes from the lower edge, and it is a 'C' shape in profile and is an oval in section. The lower edge of the bow is broken, but not recently. The reverse of the headplate has a central, perforated vertical lug, which is incomplete. The brooch has a well-developed grey-green patina. It measures 34.93mm long, 31.89mm wide, 8.99mm thick and weighs 9.43g. The brooch dates to th…
Created on: Monday 13th August 2018
Last updated: Thursday 18th October 2018
Spatial data recorded.


  • Thumbnail image of WAW-874985

Record ID: WAW-874985
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval hooked tag: An incomplete copper alloy hooked tag which originally had a triangular plate but the lower tip with the integral hook is missing. The upper edge has a tri-lobed edge, although one lobe is missing. Each lobe has a circular perforation for fastening. The decoration on the outer face has a double stranded lower-relief linear border. The upper edge at the lobes with a closed zig-zag design. The body of the tag is decorated with two scrolls, one in each upper corner with a voided pointed oval below. The reverse is undecorated. One upper corner is bent slightly. …
Created on: Friday 13th July 2018
Last updated: Friday 13th July 2018
Spatial data recorded.


  • Thumbnail image of WAW-2C799E

Record ID: WAW-2C799E
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) stirrup terminal: The copper alloy terminal is semi-cylindrical and the outer, convex face has moulded decoration whose lower terminal is slightly tapered and rounded. The decoration has a triangular protruding eyes, behind prominent ridges which are the eyes. Behind the eyes there are obliquely undulating grooves. The upper edge is broken, but not recently. On there reverse there are traces of solder. The surface of the terminal is slightly abraded and has a matte mid green colour with traces of a dark brown patina. The terminal measures 36.54mm long, 9.…
Created on: Monday 21st May 2018
Last updated: Monday 21st May 2018
Spatial data recorded.


  • Thumbnail image of WAW-E2CA3C

Record ID: WAW-E2CA3C
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) incomplete stirrup-strap mount: The cast copper alloy mount is a sub triangle with a debased animal head at each corner. The lower corners extend below the edge of the mount. The body of the mount does not appear to be decorated. On the reverse, along the lower edge there is a right-angled flange. Above the flange there are two circular perforations one of which has an iron rivet remaining. The surface is has a mottled mid-brown patina but is still coated in a fine layer of soil. It measures 67.83mm long, 39.39mm wide and 12.21mm thick. It weighs 36.81g.…
Created on: Wednesday 11th April 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of WAW-B9A509

Record ID: WAW-B9A509
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) harness fitting: harness link. The copper alloy cheek piece consists of an arm terminating with a loop at each end. The arm is a D-shaped in section, and has a swollen centre. This central section has a bulbous section and the arms protruding on either side is narrowed. Integral to each terminal is a loop, one is complete, the other incomplete. The breaks of the loop taper to a blunt point so the breaks are not recent and may be due to wear. The surface of the fitting is heavily abraded and has a matte red-brown surface. It measures 58.91mm long, 19.76mm …
Created on: Wednesday 28th March 2018
Last updated: Friday 6th April 2018
Spatial data recorded.


  • Thumbnail image of WAW-7EA8D0

Record ID: WAW-7EA8D0
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval coin: silver sceat of an unknown mint and ruler. Series not known. The obverse depicts a bust wearing a diadem. Minted between 675 and 750 AD. The coin is either copper alloy or a debased copper alloy.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of WAW-450EBE

Record ID: WAW-450EBE
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early-Medieval (late 8th and 10th centuries) copper-alloy strap end: in plan the strap end is an elongated oval with rounded terminals and is composed of two plates. The upper plate is decorated with two inward pointing chevrons which represent eyes or ears. Behind the ears, on the body of the strap end, there is a rectangular panel within a plain border, which itself is within a border decorated with transverse notches. The second terminal has a rivet hole on each plate. The reverse of the strap end is undecorated. The surface of the strap end has a dark brown patina. In length…
Created on: Wednesday 14th February 2018
Last updated: Wednesday 14th February 2018
Spatial data recorded.


  • Thumbnail image of WAW-B11F93

Record ID: WAW-B11F93
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Early-Medieval (c. AD 500 - c. AD 600) radiate-headed brooch: The copper alloy cast brooch is incomplete, only the head plate and a fragment of the bow remains. The head plate is semi-circular with five equi-distant, integral, knops on the outside edge. The knops have a double-stranded linear groove at the base. The outer face is decorated with a plain border within which there are three spiral motifs. The reverse of the head plate is has two integral, vertical, perforated lugs with traces of iron corrosion. Protruding from the lower edge of the head plate is a narrowed, integral b…
Created on: Wednesday 7th February 2018
Last updated: Thursday 8th March 2018
Spatial data recorded.


  • Thumbnail image of WAW-42F48D

Record ID: WAW-42F48D
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (c. 500 to 600 AD) incomplete long brooch, cruciform type; the copper alloy brooch is incomplete with only a fragment of the headplate and a portion of the bow remaining. The brooch has been cast, in copper alloy. The head plate is sub-square with the left-hand edge being broken, but not too recently. The upper edge has an integral, elongated triangular projection which has a rounded tip. The right-hand edge has a small broken section where presumably a projection is now missing. The head plate is decorated on the outer face with a central trapezoidal, undecorated pa…
Created on: Friday 2nd February 2018
Last updated: Friday 2nd February 2018
Spatial data recorded.


  • Thumbnail image of WAW-B15522

Record ID: WAW-B15522
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (c.6th-12th century) copper-alloy hooked tag: It has a flat circular plate with two circular sewing holes at the top. Extending from the base of the plate is a fragment of the integral hook now largely corroded. The front face of the plate has two grooves but the overall design is not clear due to corrosion. It measures 14.4mm long, 9.73mm wide, 0.71mm thick and weighs 0.26g. This is a hooked tag of Early-Medieval date. It belongs in Read's (2008, pp. 14-17, nos. 54,55,56, 72) Class A Type 2 hooked tags and is of c.6th-12th century AD date. Read, B., 2008.Hooke…
Created on: Friday 26th January 2018
Last updated: Friday 26th January 2018
Spatial data recorded.


  • Thumbnail image of WAW-DE13E6

Record ID: WAW-DE13E6
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early-Medieval (late 8th and 10th centuries) copper-alloy strap end: in plan the strap end is an elongated triangle with a broken terminal, not a recent break and is cast as one piece on this fragment. The tip of the strap end is rounded. The upper face is decorated which is divided into two portions. The portion towards the tip has a linear groove bisecting the length of this portion and the edges have fine notches which continue along the second portion of the decoration. The second portion is decorated with a lozenge within a frame and beyond it the decoration is unclear due to cor…
Created on: Thursday 4th January 2018
Last updated: Thursday 4th January 2018
Spatial data recorded.


  • Thumbnail image of WAW-97A7A7

Record ID: WAW-97A7A7
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) stirrup strap mount: The copper alloy mount is sub-trapezoidal, with the upper edge forming the longer edge. The mount is decorated with openwork, there are three larger sub-oval perforations across the centre with two sub-triangular perforations above and below with a circular perforation in each upper corner. The reverse of the mount is undecorated and has, along the lower edge an angled flange which has an iron rivet at either end. The mount measures 36.19mm long and 43.21mm wide. It weighs 17.85g. The mount is a stirrup strap mount dating to th…
Created on: Tuesday 19th December 2017
Last updated: Wednesday 3rd January 2018
Spatial data recorded.


  • Thumbnail image of WAW-5B39CA

Record ID: WAW-5B39CA
Object type: SWORD
Broad period: EARLY MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (c. AD 900 to 950) sword guard, probably Petersen Type P: The guard is rectangular in plan with a concave lower edge and convex upper edge. In section the guard is slightly trapezoidal with rounded corners. The terminals taper to a rounded vertical edge with one terminal having a hole due to corrosion. The guard is hollow and has a slot running the length of the lower edge and is squashed together in two places forming three holes. The upper edge has a central sub-rectangular slot with a circular cell or rivet hole either side. The surface of the guard is heavily abr…
Created on: Monday 4th December 2017
Last updated: Monday 18th December 2017
Spatial data recorded.


  • Thumbnail image of WAW-3711E8

Record ID: WAW-3711E8
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) stirrup terminal: The copper alloy terminal is semi-cylindrical and the outer, convex face has moulded decoration whose lower terminal is slightly tapered. The decoration has an elongated scroll on either side, droplet-shaped eyes and small projecting ears. In section the terminal is semi-circular and filled with iron on the reverse. The upper edge is broken, but not recently. The surface of the terminal is slightly abraded and has a matte mid green colour with traces of a dark brown patina. The terminal measures 37.85mm long, 13.9mm wide, 10.45mm thi…
Created on: Wednesday 8th November 2017
Last updated: Friday 10th November 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 444
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 548
  • Mean quantity: 1.234
  • Maximum: 100

Filter your search

1 - 20 of 444 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.