Back to simple search | Back to advanced search

    You searched for:

    • Allen: EPP

  • Thumbnail image of WAW-7B05A2

Record ID: WAW-7B05A2
Object type: BUCKLE
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval (13th to mid 14th century) pin from a disc-on-pin buckle: The pin has a large oval plate with a circular high-relief ring in the centre. There are two arms each paced on opposing sides, one arm is an elongated triangle while the other arm is curled and would have curled around the strap bar. The surface of the pin has an abraded red-brown matte surface. The pin measures 22.68mm long, 11.33mm wide, 5.33mm thick at the curl and weighs 1.16g. This buckle pin can be classified as a Redmayne (2014) Type B.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of KENT-7ADF28

Record ID: KENT-7ADF28
Object type: UNIDENTIFIED OBJECT
Broad period: BRONZE AGE
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast Bronze Age object, probably from a spear of Mid-Late Bronze Age date. Description: The fragment is irregularly shaped with very worn breaks. It has a vertically running central rib. The surface and breaks are heavily patainted and pitted from corrosion making its' exact features uncertain Measurements: 20.68mm long, 19.78mm wide, 6.41mm thick (including rib, 5.05mm without) 8.81g in weight.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of WAW-7ACC21

Record ID: WAW-7ACC21
Object type: PIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Possible Roman (1st to 4th centuries) copper alloy pin or stud: The pin head is globular and tapers towards the integral pin shaft. The shaft protrudes from the base of the pin head and tapers to a sharp point. The shaft is only 15.03mm long. The pin has traces of a well developed light green patina, otherwise it is heavily abraded. The pin measures 22.71mm long, 8.84mm diameter. It weighs 2.93g. The pin probably dates to the Roman period and it is a pin rather than stud it would fall into the Cool typology Group 1, a knob head type. Cool, H. 1990 'Roman Metal Hair Pins From Southern…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of DYFED-7AA2ED

Record ID: DYFED-7AA2ED
Object type: FLEAM
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Post Medieval Fleam/ Blood Letting Knife. Object consists of a copper alloy casing, which contains an undetermined number of blades inside which fold outwards. There is heavy corrosion and therefore the blades do not move anymore. The object has a long handle which then bulbs at the end to copy the shape of the blades within. There is a hinge and the thinnest part which piercers through the blades and allows them to swing outwards. The object weighs 29.5g and is 83.90mm in length.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded. This findspot is known as 'Templeton', grid reference and parish protected.


  • Image not taken

Record ID: NMS-7A9AE5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle frame, thick chamfered outside edge with five filed grooves, slightly convex sides, narrowed rectangular-sectioned bar with offset at mid-point (length 16.5mm, width 21mm, outside edge 5mm thick). See Egan and Pritchard (1991), 96, fig.61, no.438, although without vestigial transverse ridges at corners. 14th century.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Image not taken

Record ID: SF-7A78A7
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy late medieval to early post-medieval square uniface coin weight for a French 'ecu au soleil' dating to the period c.AD 1475-1654. The outer face has a raised heraldic shield charged with a sun with eight wavy arms or streams below an open bifoliate crown inside a pellet circle. The reverse is undecorated. Withers and Withers 1995, 39, no.70. Length: 14.98mm, width: 14.34mm, thickness: 1.91mm, weight: 2.66g
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.


  • Image not taken

Record ID: NMS-7A6C86
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy strap fitting, a trapezoidal pendent loop with a rounded lobe at each corner, and with the shortest side (8.5mm) narrowed for the accommodation of a folded sheet strip bar mount with single rivet at the attachment end. Loop: Height 10.5mm. Width 15mm. Thickness 1.5mm. 14th century.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of LEIC-7A6A7C

Record ID: LEIC-7A6A7C
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (Anglo-Scandinavian) copper alloy stirrup strap mount, 39mm long, 24mm wide and 10mm thick (including the lip) with a weigh of 19.04g. The object is rectangular in form and cross section. It has an upper surface formed of a central rounded projection, flanked by a dip and then a rounded terminal. Below the central projection is a circular fixing hole. Each side has two rounded recesses flanking two small rounded projections and the base is flat with a sub rectangular lip projecting from its reverse which has a, now filled, circular attachment hole. The decoration is …
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of DYFED-7A51B3

Record ID: DYFED-7A51B3
Object type: COIN
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Silver Danish 12 Skilling Coin from the Danish West Indies dated to 1767. The obverse features a crowned monogram of a large 'C' with a 'VII' in the centre of it. There is a legend around the circumference of the coin which reads 'D G DAN NOR VAN GOT REX'. The Reverse of the coin features the image of a ship in the centre of a circle, with the date 1767 beneath it. There is also a legend around the circumference of the coin which reads 'AMERICANSK M XII SKILL DANSKE'. This coin was struck with a frozen date of 1767 but was produced in 1782, 1790, 1791, 1795 and 1800. The coin is 22.47…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded. This findspot is known as 'Black Bridge', grid reference and parish protected.


  • Image not taken

Record ID: NMS-7A1EA0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval gilt copper alloy buckle plate, rectangular, folded widthways and narrowed and shortened on the reverse, with a pin slot, frame recesses, five copper alloy rivets with domed heads and traces of a bordering line of engraved rocker arm on the face. Length 38.5mm. Width 14mm. Width of rear part of plate 10mm. 13th - 14th century.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of WAW-79E426

Record ID: WAW-79E426
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Roman (2nd to early 3rd centuries) disc brooch fragment: Approximately a fifth of the brooch remains, which includes the centre and portion of the rim. Originally the brooch was circular, but is not sub-triangular in fragmentary state. The brooch has a conical shaped profile with the apex being truncated with a high-relief ring-and-dot design. At the base of the conical there is a flange which has concentric two high-relief rings and a rim as a border. The reverse has two perforated double lugs which would be where the spring was fixed, only the iron axis bar is remains. One the revers…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of LEIC-79D516

Record ID: LEIC-79D516
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Early Post Medieval copper alloy end cap from a knife handle, 15mm long, 14mm wide and 8mm thick with a weight of 11.81g. The object is sub rectangular in form and oval in cross section. It appears to have a stylised zoomorphic design, possibly of a dog or bear? It is simply decorated with two diagonal incised lines on its two widest faces (the shorter one butting up to the muzzle). One short edge has two vertical incised lines and the other houses a small projection near one end, formed of three linear ridges forming a muzzle. The underside is covered in iron staining where the tang …
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of WAW-79AB5C

Record ID: WAW-79AB5C
Object type: FINGER RING
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Roman (1st to 2nd centuries) finger ring: The copper alloy finger ring, which has been cast, has a horizontal oval cell bezel. The cell has traces of the original filling which appears to be a black ceramic substance, which may be a type of adhesive. The shoulders are decorated forming a pointed oval around the cell and tapers towards the loop, of which only a small portion remains. The breaks of the loop are not too recent. The loop has an oval section. The surface of the ring has a matte corroded, mid green colour. It measures 23.04mm long across the hoop terminals, 15.76mm wide ac…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Image not taken

Record ID: NMS-796558
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval gilt copper alloy strap end formed from one rectangular piece of sheet copper alloy folded widthways with a wide gap at the fold. There is an integral copper alloy rivet on the reverse of the upper end where the folded end is secured through a cracked rivet-hole. Length 25.5mm. Width 14mm. c.1270 - c.1400.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of WAW-794704

Record ID: WAW-794704
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy hinged Durotrigan Type (strip bow) brooch dating to the period c. AD 43 - 70. The majority of the brooch's bow survives although its head and catchplate are very fragmentary. The head of the brooch projects backwards from the bow in a sub-rectangular plate which is incomplete and has a central slot cut into the edge. This section is curled forwards to form a cylinder. The axis bar and pin is missing. The bow of the brooch is D-shaped in cross section and is an elongated triangle which tapers to a blunt foot. In profile the bow is very curved, convex…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Image not taken

Record ID: NMS-793A3F
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Just over one partly distorted half of a post-medieval double-looped buckle frame, both loops oval (or B-shaped), with a lobe at the ends of the bar and an acorn knop in the centre of the surviving edge, cf. Whitehead 2003, no. 405. Estimated length 60mm. Width 28mm. Mid 16th - mid 17th century.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-7863AA

Record ID: WMID-7863AA
Object type: BUCKLE
Broad period: MEDIEVAL
County: Telford and Wrekin
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy buckle, dating to the Medieval period, c. AD 1300 - c. AD 1400. Around 45 % of the buckle remains consisting of the outer edge of the loop. The axis bar, pin and rest of the loop are missing, presumed lost in antiquity. The object is broadly D shaped. The outer edge has been decorated with a central triangle consisting of two raised diagonal rectangular strips joining to a point towards the outside of the buckle, forming a decorated pin rest. To either side of the pin rest, diagonal lines form decorative features. The loop narrows towards the pin bar, but i…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Image not taken

Record ID: WILT-7835B3
Object type: BROOCH
Broad period: IRON AGE
County: South Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
An Irong age to Roman copper alloy Langton Down brooch, probably dating to c. AD 25-60. The brooch is incomplete and consists of the head and upper bow only. At the head of the bow cylindrical wings expand transversely, formed of rolled copper alloy sheet, retaining the spring of a sprung pin in situ. A rectangular slot was cut into the reverse to accomodated a hinged pin, now lost, although much of the reverse of the head has been lost to post-depositional damage. The bow drops out of the head vertically in profile, with a convex upper edge viewed in plan and slightly tapering sides. …
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Image not taken

Record ID: WILT-77A9F3
Object type: BROOCH
Broad period: ROMAN
County: South Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy initial T-shaped brooch, probably dating to c. AD 50-100. The brooch is incomplete, consisting of the head and upper bow only. At the head of the bow cylindrical wings expand transversely, retaining an iron axis bar in situ and with a rectangualr slot cut into the reverse to accommodate a hinged pin, now lost. The bow of the brooch is shallowly plano-convex, tapering from the head into towards an old break, where it is truncated. The bow is decorated with a central, short, longitudinal ridge immediately below the head of the brooch with an incised longitudinal groo…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of PUBLIC-7689EA

Record ID: PUBLIC-7689EA
Object type: COIN
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Published Find published
An incomplete copper alloy Roman nummus of Constans (AD 333-350), dating to the period AD 347-348. (Reece period 17). VICTORIAE DD AVGGQ NN reverse type depicting Two Victories standing facing one another holding wreaths. Mint of Trier. As RIC VIII, p. 152, no. 196. Dimensions: Diameter 15.2 mm, thickness 1.3 mm, weight 1.6 gm. Die axis 1 o'clock. Coin has black patina.
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 843,990
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 1,277,145
  • Mean quantity: 1.520
  • Maximum: 52,504

Filter your search

1 - 20 of 843,990 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.