Rights Holder: Kent County Council
CC License:
Our images can be used under a CC BY attribution licence (unless stated otherwise).
Unique ID: KENT-F0560B
Object type certainty: Possibly
Workflow
status: Awaiting validation
An uncertain tear-drop shaped lead-alloy object likely post medieval c. AD 1500-1800 palm guard.
Description: The object is tear drop shape in plan, both faces are flat, the sides slant by approx. 10mm from face to face. The object has some minor damage with a nick in one edge a third of the way up. On the narrower face there are the remnants two circular posts, of unknown purpose. The broader face has some slight indentations on the wider part.
Measurements: length: 60.96mm, width: 35.96mm, thickness: 12.23mm, weight: 147.58g.
Class: Palm guard
Subsequent action after recording: Returned to finder
Broad period: POST MEDIEVAL
Period from: ROMAN
Period to: POST MEDIEVAL
Date from: Circa AD 1500
Date to: Circa AD 1800
Quantity: 1
Length: 60.96 mm
Width: 35.96 mm
Thickness: 12.23 mm
Weight: 147.58 g
This information is restricted for your access level.
Primary material: Lead Alloy
Manufacture method: Cast
Completeness: Incomplete
4 Figure: TR2146
Four figure Latitude: 51.17052014
Four figure longitude: 1.15998154
1:25K map: TR2146
1:10K map: TR24NW
Grid reference source: GPS (from the finder)
Unmasked grid reference accurate to a 10 metre square.
No references cited so far.
Find number: KENT-F0C002
Object type: THIMBLE
Broadperiod: POST MEDIEVAL
An uncertain tear-drop shaped lead-alloy object, likely a leather working palm guard of post medieval c.AD 1500-1800 date.
Description: Th…
Workflow: Awaiting validation
Find number: KENT-0B5C75
Object type: THIMBLE
Broadperiod: POST MEDIEVAL
A complete cast lead alloy probable palm guard from the Post-Medieval period dating to c.AD 1500-1800.
Description: The object is tear dro…
Workflow: Awaiting validation
Find number: LANCUM-53DF0A
Object type: THIMBLE
Broadperiod: MEDIEVAL
A cast lead object, probably a leather working palm guard. It is tear-drop shaped, and has one flat face, with a convex reverse. The surface …
Workflow: Awaiting validation