Rights Holder: The Portable Antiquities Scheme
CC License:
Our images can be used under a CC BY attribution licence (unless stated otherwise).
Unique ID: LANCUM-E352C2
Object type certainty: Certain
Workflow
status: Awaiting validation
A Post Medieval lead alloy four-part cloth seal dating from AD1668 or 1669. The seal was folded whereas the integral rivet was pushed through the perforated disc and hammered flat to secure it. Disc one includes the integral rivet. Disc two bears a square royal shield whilst on disc three the lettering "CAR/SAY" is still legible. Disc two is the first inner disc and shows an animal, possibly horse, with raised fore leg and the letters PH. Disc four is the final perforated disc and has no markings.
The word CARSAY refers to the cloth Kersey:
(http://en.wikipedia.org/wiki/Kersey_(cloth)): "Kersey is a kind of coarse woollen cloth that was an important component of the textile trade in Medieval England. It derives its name from kersey yarn and ultimately from the village of Kersey, Suffolk, having presumably originated in that region. However the cloth was made in many places. It was being woven as early as 1262 in Andover, Hampshire, where regulations prohibited the inclusion of Spanish wool in kerseys. By 1475, the West Riding of Yorkshire including Calderdale was also a major producer. Kersey was a lighter weight cloth than broadcloth. English kerseys were widely exported to central Europe and other places: a surviving business letter from the end of the 16th century recommends to trade kerseys for good wine on the Canary Islands.
Kersey yarns were spun in large gauges (thicknesses) from inferior carded wool, and made thick and sturdy cloth. Kersey was a warp-backed, twill-weave cloth woven on a four-treadle loom.
As a rule, half the relatively small, numerous and closely set warp ends [threads] were struck with a big kersey weft in a two-and-two, unbalanced and highly prominent twill. The rest of the ends were simultaneously struck in a one-and-three twill, so they appeared mainly on the back of the cloth, while the back-warp stitches on the face of the cloth were concealed among the face-warp threads. One of the secrets of weaving a good kersey lay in combining the adequate stitching of the weft by the back warp with the concealment of the back-warp stitches.
The back of the cloth was napped and shorn after fulling, producing a dense, warm fabric with a smooth back."
Reference: Egan, G. 1992. Leaden Cloth Seals. Datasheet 3. Finds Research Group 700-1700 Datasbeets 1-24. 1985-1998. Reprographic Unit, University of Oxford.
Subsequent action after recording: Returned to finder
Broad period: POST MEDIEVAL
Subperiod from: Early
Period from: POST MEDIEVAL
Subperiod to: Early
Period to: POST MEDIEVAL
Date from: Circa AD 1668
Date to: Exactly AD 1669
Quantity: 1
Length: 31 mm
Height: 3 mm
Width: 11.1 mm
Thickness: 1 mm
Weight: 7.2 g
Date(s) of discovery: Tuesday 1st May 2012
This information is restricted for your access level.
Primary material: Lead Alloy
Manufacture method: Cast
Completeness: Complete
Grid reference source: From a paper map
Unmasked grid reference accurate to a 1 metre square.
No references cited so far.