Finds within constituency of North East Derbyshire

A complete list of all finds recorded
Image Object Type Find number Broadperiod County Actions
COIN Coin SWYOR-4E37A4
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
A Post Medieval silver coin; a penny of Elizabeth I (1558 - 1603), second issue (1561 - 1582), London mint. Though the mintmark is visible, it cannot be matched to any of the known mintmarks. This may be due to wear or being poorly struck. See North number 2001.
MUSKET BALL Musket ball SWYOR-4DED77
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
A Post Medieval lead allot pistol shot or small musket ball. It has been cast but the casting seam has been trimmed. It is almost spherical. It has a well developed white patina. It dates form 1600 - 1800.
CORE Core SWYOR-4DDE46
Find waiting to be validated
Mesolithic Derbyshire xml | csv
json
A flint core probably dating form the Mesolithic period. It is formed from opaque dark grey flint with cortex on the proximal end. It is multi-directional and blades and bladelets have been removed from it.
VESSEL Vessel SWYOR-4DCC55
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
A shard from a ceramic vessel of Post Medieval date. The shard is a base shard from a small vessel. The base is beaded. The fabric is hard, a yellow cream colour and the breaks are fine. There are sparse grey inclusions which are very small. Both faces are glazed, with a clear glaze on the outsi...
VESSEL Vessel SWYOR-4D9AF1
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
A shard from a ceramic vessel of probable Post Medieval date. The shard is a rim shard from a thick earthenware bowl. The rim is rounded and slightly out-turned. The fabric is fairly hard, a bright red/orange colour reduced to grey on the inside. The breaks are irregular and the inclusions are s...
VESSEL Vessel SWYOR-4D5EB6
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
A shard from a ceramic vessel of probable Medieval to Post Medieval date. The vessel is square or rectangular in plan. This shard is part of the base and wall, and is a straight edge. The base is beaded. The inside is a rounded curve in section. The fabric is hard, a bright red/orange colour with...
COIN Coin SWYOR-1010D4
Find waiting to be validated
Post medieval South Yorkshire xml | csv
json
A copper alloy Post Medieval coin; an Irish crown of James II (1685 - 1691), Gunmoney coinage (1689 - 1690) dated 1690. See Spink Volume II number 6578.
SLAG Slag SWYOR-3745E8
Find waiting to be validated
Post medieval South Yorkshire xml | csv
json
A piece of metalworking slag of unknown date. Light-weight, magnetised and slightly convex piece of slag, possibly part of a crucible, or maybe cinder slag. The material is pale grey in the centre; one surface is blackened and the other surface is dark brown in colour; it has a rough and pitted s...
SPINDLE WHORL Spindle whorl SWYOR-36E840
Find waiting to be validated
Medieval South Yorkshire xml | csv
json
A lead alloy spindle whorl of probable Medieval date. The spindle whorl is plano convex, with one face more shallow than the other, and it has a raised border around the outer edge. There is also a central circular perforation which tapers from a diameter of 10.6mm to 9.4mm; there is no indentat...
WEIGHT Weight SWYOR-252684
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
A crudely cast, circular lead weight of Medieval or Post Medieval date. It is circular and the upper surface is slightly dished. There is a narrow groove which partly cuts across the middle of the upper surface, but this is probably accidental damage. There are no marks of value, but at a weight ...
TOKEN Token DENO-FFD1F6
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Incomplete cast lead alloy probable spindle whorl of probable late Medieval to early post Medieval date. Only half of the whorl survives. The whorl is small in size compared to typical whorls of similar design. The whorl is bi-convex in profile and has a central circular perforation - the break...
TOKEN Token DENO-FF9797
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Complete cast lead alloy token of probable late Medieval to early post Medieval date. The token is a uniface token bearing the raised design of a six-petalled flower on one side and is blank on the other side. Although difficult to date, primarily due to the ease and simplicity of their productio...
SPINDLE WHORL Spindle whorl SWYOR-25E644
Find waiting to be validated
Medieval Derbyshire xml | csv
json
A cast, lead alloy spindle whorl, probably dating from the medieval period, AD1200-1500. It is plano-convex; both sides being decorated with raised lines forming a four pointed star pattern with raised pellets in the internal and external angles. one side is more worn than the other. There is n...
ARROWHEAD Arrowhead DENO-C43F02
Find waiting to be validated
Neolithic Derbyshire xml | csv
json
Near complete Neolithic leaf-shaped flint arrowhead. Bifacially worked, with abrupt and semi-abrupt re-touching of edges, with tip broken off. Modern damage reveals an amber coloured flint but the majority of the surface is now covered with a white-grey/purple patina. Dated to the Neolithic perio...
SCRAPER (TOOL) Scraper (tool) DENO-2C7402
Find waiting to be validated
Neolithic Derbyshire xml | csv
json
Flint flake or scraper; leaf-shaped. Hard hammer bulb at widest end. Dorsal - 4 flake scars; nibbling along right edge; retouch at proximal end. Length 33.2mm, width 24.98mm, thickness 8.5mm, weight 5.59g.
SWORD BELT Sword belt DENO-D0EF75
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Incomplete cast copper alloy sword belt fittings of post Medieval date. The surviving part of the fittings is approximately one third of what would have made up the entire piece and consists of one end of the main belt attachment plate with single rivet hole and one integrally cast suspension lo...
UNIDENTIFIED OBJECT Unidentified object DENO-D43192
Find waiting to be validated
Medieval Derbyshire xml | csv
json
TREASURE ITEM 2011 T285: Incomplete unidentified silver fitting of late Medieval date. The item consists of a single sheet of silver which has been rolled and pressed into a wedge-shaped cone. The seam, which is aligned edge to edge rather than overlapping, runs from the top to bottom along one...
Coin Coin DENO-2FC8A4
Find waiting to be validated
Medieval Derbyshire xml | csv
json
Medieval coin; silver cut farthing of Henry II, cross and crosslets (Tealby) type, uncertain class and mint/moneyer, 1158-1180; Length 9.8mm, width 9.4mm, weight 0.23g.
Token Token DENO-F8C866
Find waiting to be validated
Medieval Derbyshire xml | csv
json
Medieval/post-Medieval cast lead alloy token. One side has raised moulded decoration of 15 randomly placed pellets (diameter c3.5mm); the other side is undecorated. Thick cream patina. One edge slightly bent upwards. Diameter 21.4mm, thickness 2.8mm, weight 5.38g.
Token Token DENO-F8C587
Find waiting to be validated
Medieval Derbyshire xml | csv
json
Medieval/post-Medieval cast lead alloy token. Sub-circular disc; one side has raised moulded decoration of a long cross; the other side is undecorated. Two casting sprues on the edge at c.120 degrees apart. Mid grey patina. Diameter 23.7-24.2mm, thickness 2.6mm, weight 7.21g. Possibly based on a...
BROOCH Brooch LEIC-B9A364
Find waiting to be validated
Roman Derbyshire xml | csv
json
Roman copper alloy bow brooch, 25mm long, 22mm wide and 14mm thick. The object is in fair condition and weighs 7.79grams. It consists of semi-circular sectioned wings missing their spring and a plain sub circular sectioned bow, missing its catchplate.
WEIGHT Weight LEIC-3C7A11
Find waiting to be validated
Medieval Derbyshire xml | csv
json
Medieval? lead weight, 43mm long, 39mm wide and 28mm thick. The object is in poor condition and weighs 209grams. The object consists of a sub oval shaped roughly hollow cast weight which has a cross of copper alloy wire set into its centre, probably for suspension.
Token Token DENO-12FCB2
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Post-Medieval (probably) cast lead alloy token or medalet with faint relief-moulded decoration. One side shows a horse and rider going right, the rider possibly brandishing a ?sword behind him, and with an S to the left of the head and a retrograde C to the right. The other side bears an orb and ...
HOOKED TAG Hooked tag DENO-12FB14
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Post-Medieval cast copepr alloy hooked tag, Read Class E Type 7. Heart-shaped relief moulded openwork body with three apertures with rope lines between; two knops projecting from either side (forming an X with the rope lines); small bifoliate knop projecting into the loop; trapezoidal loop; compl...
Mount Mount DENO-12F906
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Post-Medieval cast copper alloy mount, 16th/17th century. Sub-circular body with collared circular terminal with collared projecting knop at one end and broken across a rivet hole at the other end. Another rivet hole in the circular terminal which still retains a broken copper alloy rivet. Hollow...
Mount Mount DENO-12F863
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Post-Medieval cast copper alloy mount, 16th/17th century. Sub-circular body with double collar terminal at one end (a loop may be broken off this, but there is no trace), and collared circular terminal with collared projecting knop at the other end. Two rivet holes, one behind the double collar t...
KEY (LOCKING) Key (locking) DENO-12B187
Find waiting to be validated
Medieval Derbyshire xml | csv
json
Medieval cast copper alloy rotary key. Incomplete - bow and part of shank only. Lozenge shaped bow with four circular holes (diameter c.5mm), one in each corner. The bow terminates in a hollow circular tubular loop (external diameter 14.5mm) set at 90 degrees to the bow; its outside is decorated ...
KEY (LOCKING) Key (locking) DENO-12B187
Find waiting to be validated
Medieval Derbyshire xml | csv
json
Medieval cast copper alloy rotary key. Incomplete - bow and part of shank only. Lozenge shaped bow with four circular holes (diameter c.5mm), one in each corner. The bow terminates in a hollow circular tubular loop (external diameter 14.5mm) set at 90 degrees to the bow; its outside is decorated ...
BUCKLE Buckle DENO-9ADAD1
Find waiting to be validated
Post medieval Derbyshire xml | csv
json
Complete cast copper alloy buckle frame of Post-Medieval date. It is a double loop trapezoidal buckle which is missing its pin. The sides of the buckle frame are pointed and at either end of the strap bar there is a lobed projection. The outside edge of the frame is slightly bevelled but there is...
HARNESS FITTING Harness fitting DENO-72EA46
Find waiting to be validated
Early medieval Derbyshire xml | csv
json
Early Medieval Anglo-Scandinavian cast copper alloy harness cheek piece fragment, Wililams Type 1 (see Finds Research Datasheet 39, fig 3), 11th century. Part of one loop only. Flat-sectioned with engraved decoration which would have formed one of a pair animals (debased zoomorphic design). Brown...

1 - 30 of 209 records.

This page is available in: xml json kml rss atom representations.

Social Bookmarking: