Finds within constituency of High Peak
| Image | Object Type | Find number | Broadperiod | County | Actions |
|---|---|---|---|---|---|
|
|
Coin | WMID-14D575 |
Medieval | Staffordshire |
xml | csv json |
| A silver medieval Scottish halfgroat of David II, dating from 1329 to 1371. Minted in Edinburgh. The coin suffers from some wear and clipping. | |||||
|
|
Token | LVPL-BB5327 |
Post medieval | Derbyshire |
xml | csv json |
| A uni-face lead token dating to the Post-Medieval period. The object is circular in plan and flat. The object is decorated with a six-petaled flower containing a raised pellet in the centre. At the tip of each pellet is a petal. The object has a greyish white patina. A similar example which can ... | |||||
|
|
Brooch | SWYOR-EF57B7 |
Roman | South Yorkshire |
xml | csv json |
| Incomplete cast copper alloy Headstud brooch, dating to the early Roman period. The wings are rectangular and have a cylindrical housing for the (probably) copper alloy axis bar on the reverse. The pin and the suspension loop at the top of the head are missing but ferrous corrosion indictes that ... | |||||
|
|
Coin | SWYOR-742113 |
Post medieval | Derbyshire |
xml | csv json |
| A Post Medieval silver coin; a groat of Elizabeth I (1558 - 1603), first issue, fleur mint mark dating from 1558 - 1560. See North number 1986. | |||||
|
|
Coin | SWYOR-742113 |
Post medieval | Derbyshire |
xml | csv json |
| A Post Medieval silver coin; a groat of Elizabeth I (1558 - 1603), first issue, fleur mint mark dating from 1558 - 1560. See North number 1986. | |||||
|
|
Strap fitting | DENO-94B4E3 |
Post medieval | Derbyshire |
xml | csv json |
| Post-Medieval cast copper alloy belt mount/strap fitting, 17th century. Flat; one end trilobed, each rounded lobe seperated by filed line; the other end narrowed and pointed; two integral spikes on the reverse, both bent in the same direction, both with tips missing. Red-brown. Length 27.8mm, wid... | |||||
|
|
Spindle whorl | DENO-947CD7 |
Medieval | Derbyshire |
xml | csv json |
| Cast lead alloy spindle whorl. Biconical; each cone has relief moulded decoration of seven pellets divided by transverse lines; central circular perforation does not taper (diameter 8.9mm). Thick white patina. Diameter 20.0-26.6mm, thickness 21.0mm, weight 40.90g. Probably Medieval. | |||||
|
|
Spindle whorl | DENO-9478F3 |
Medieval | Derbyshire |
xml | csv json |
| Cast lead alloy spindle whorl. Flat circular; one face decorated with relief moulded decoration of an eight-pointed linear star; the other face is undecorated; central circular perforation does not taper (diameter c.8.3mm); flat sides. Thick white patina. Diameter 25.3mm, thickness 7.7mm, weight ... | |||||
|
|
Strap fitting | WAW-76AFF6 |
Medieval | Warwickshire |
xml | csv json |
| A complete cast copper alloy single loop strap slide or loop, of Late Medieval to Early Post Medieval dating (15th to 17th Centuries AD) The strap slide or loop is sub rectangular in plan, and the frame is D-shaped in cross section. The front is decorated with two sub oval ends, tapering ... | |||||
|
|
Weight | LVPL-F58873 |
Post medieval | Greater Manchester |
xml | csv json |
| Cast lead or lead alloy weight probably dating to the Post-Medieval period, (1500-1800). The object is cone shaped in plan and is sub-circular in cross-section. The base of the object is flat with a circular depression at the centre. The top of the object has been pinched together creating a sub-... | |||||
|
|
Axehead | DENO-034F45 |
Bronze age | Derbyshire |
xml | csv json |
| Bronze Age cast copper alloy class 5 flat axe, Arreton phase, 1700-1500BC. Incomplete - much of the original surface has flaked off and the butt end, blade end and three flanges are all damaged. Although the butt end is damaged it appears to have been straight. Small flanges (height of only compl... | |||||
|
|
Cloth seal | DENO-02CFA5 |
Post medieval | Derbyshire |
xml | csv json |
| Cast lead alloy cloth seal, Medieval (possibly) or post-Medieval (probably). Complete two disc seal. One disc is stamped with the arms of England. The other side has a very faint stamp of a chevron with one thing inside the V, and possibly two or three things below. Thick cream patina. Length 20.... | |||||
|
|
Token | DENO-029451 |
Medieval | Derbyshire |
xml | csv json |
| Cast lead alloy token, Medival/post-Medieval. Sub-circular disc; one side has relief moulded decoration of a compass drawn sexfoil with central pellet; the other side is undecorated. Diameter 22.2mm-23.9mm, thickness 2.3mm-3.6mm, weight 10.54g. | |||||
|
|
Spindle whorl | DENO-024245 |
Medieval | Derbyshire |
xml | csv json |
| Cast lead alloy spindle whorl, Roman to post-Medieval (probably Medieval). Biconical; the hole does not taper; very worn relief moulded decoration on both sides of four groups of three pellets divided by transverse lines. Thick cream patina. Diameter 25.3mm, thickness 11.4mm, diameter of hole 10.... | |||||
|
|
Coin | DENO-021542 |
Post medieval | Derbyshire |
xml | csv json |
| Post-Medieval coin; silver groat, extremely worn but the shield and fragment of legend PO[SVI DEV etc] indicate it is from the period Henry VII to Elizabeth I, 1502-1603. Clipped and very thin (c.0.25mm). Diameter 22.2mm, weight 1.09g. | |||||
|
|
Coin | DENO-F263D3 |
Post medieval | Derbyshire |
xml | csv json |
| Post-Medieval coin; silver penny of Elizabeth I, third issue, initial mark bell, 1582-3, N.2017. Diameter 13.4mm, weight 0.39g. | |||||
|
|
Coin | DENO-F24337 |
Post medieval | Derbyshire |
xml | csv json |
| Post-Medieval coin; silver groat of Philip and Mary, 1554-1558, N.1973. Diameter 24.1mm, weight 1.76g. | |||||
|
|
Coin | DENO-DC8577 |
Medieval | Derbyshire |
xml | csv json |
| Medieval coin; silver short cross cut halfpenny, probably of John, Class 5 or 6. The moneyer's name reads WLATE[...], presumably Walter with the A and L swapped round. Another coin with this mistake is recorded on the PAS database LANCUM-4479B1, from Gloucestershire - this is a penny, minted in L... | |||||
|
|
Bead | LVPL-63D447 |
Medieval | Greater Manchester |
xml | csv json |
| Small lead possible bead probably dating to the Medieval or Post-Medieval period. The object is circular in plan and rectangular in cross section. Each surface is flat and undecorated. There has been some damage to one side of the outer edge. The object has a central circular perforation. It is l... | |||||
|
|
Weight | LVPL-63BCA3 |
Medieval | Greater Manchester |
xml | csv json |
| Cast lead weight of uncertain date. It is circular in plan and rectangular in cross-section. The object is of uneven thickness and the outer edges have been pressed inwards. Both the upper and lower surfaces are uneven and worn. Lead weights are common throughout the Medieval and Post-Medieval pe... | |||||
|
|
Coin | WAW-B02041 |
Medieval | Derbyshire |
xml | csv json |
| Medieval coin: cut halfpenny of Henry III (1216-1272) minted in London between 1250 and 1275 AD. Class 5; North Nos. 991-999. | |||||
|
|
Brooch | DENO-AA1405 |
Roman | Derbyshire |
xml | csv json |
| Roman cast copper alloy knee brooch, 2nd-3rd century. The pin is missing; the spring would have been held on a rod between two lugs (now broken) on the back of the headplate - the rod and two turns of the spring are present but detached. The large flat hemispherical headplate has moulded decorati... | |||||
|
|
Brooch | DENO-9A54C4 |
Roman | Derbyshire |
xml | csv json |
| Roman cast copper alloy dragonesque brooch, 1st-2nd century. Complete but snapped in two. S-shaped in plan with one head twisted to the right and one to the left. Both heads are similar with a large ear with a drop-shaped lump in the centre, and rounded snout with, on one, a circular depression... | |||||
|
|
Coin | DENO-9A25E0 |
Post medieval | Derbyshire |
xml | csv json |
| Post-Medieval coin; silver sixpence of Elizabeth I, mintmark castle, date 1571. Diameter 26.5mm, weight 2.56g. | |||||
|
|
Coin | DENO-99E5C7 |
Medieval | Derbyshire |
xml | csv json |
| Medieval coin; silver penny of Edward IV 1st reign light coinage (1464-1470) or 2nd reign (1471-1483) or less likely Henry VI restored (1470-1471), York mint under Archbishop George Neville. Heavily clipped. Diameter (clipped) 15.5mm, weight 0.69g. | |||||
|
|
Coin | DENO-999165 |
Medieval | Derbyshire |
xml | csv json |
| Medieval coin; silver penny of Edward II, Bury St Edmunds mint, Class 15b, 1320-1333. Diameter 20.0mm, weight 1.26g. | |||||
|
|
Coin | DENO-995226 |
Medieval | Derbyshire |
xml | csv json |
| Medieval coin; silver cut halfpenny of Henry III, moneyer Robert, probaly Exeter mint, Class IIb, IIIa or IIIb, 1248-1250. Diameter 17.7mm, width 9.2mm, weight 0.58g. | |||||
|
|
Lithic implement | LVPL-94DFF2 |
Neolithic | Derbyshire |
xml | csv json |
| A flint implement dating to the late Neolithic period, (2500-2100BC). The implement is an arrowhead and is sub-triangular in plan. The object is thin and rectangular in cross-section. The point of the arrowhead has broken away. The dorsal face displays ridges and scars of earlier removals. The ve... | |||||
|
|
Token | DENO-9A8A02 |
Post medieval | Derbyshire |
xml | csv json |
| Early post-Medieval cast lead alloy token, probably 17th century. Circular disc; One side has raised moulded design of the initials I B (with a pellet after the middle of the B, and pellets at the ends of the uprights) within a double line border embellished with fifteen evenly spaced transverse ... | |||||
|
|
Buckle | DENO-9A5DC5 |
Medieval | Derbyshire |
xml | csv json |
| Medieval cast copper alloy single loop D-shaped buckle with rectangular buckle plate, c.1250-1500. Simple frame with narrowed and offset strap bar. The plate is recessed to take the missing pin; the plate is rectangular, and narrowed on the reverse; there are two domed rivets at the proximal end;... | |||||
