All finds recorded in the Parliamentary constituency of Erewash - Page: 1

Finds within constituency of Erewash

A complete list of all finds recorded
Image	Object Type	Find number	Broadperiod	County	Actions
	Coin	DENO-58F305	Roman	Nottinghamshire	xml \| csv json
Roman Coin: Incomplete struck or hammered copper alloy nummus of Theodora (posthumous issue). Reverse type PIETAS ROMANA showing Pietas standing holding an infant to her breast. Uncertain mint, minted AD. 337-341.
	Coin	DENO-5857C6	Roman	Nottinghamshire	xml \| csv json
Roman Coin: Struck or hammered copper alloy nummus of Constans. Reverse type VICTORIAE DD AVGGQ NN showing two Victories facing, each holding a wreath in front. Minted in Trier AD 341-346. Coin Reference: LRBC, compare with numbers 148-150.
	Coin	DENO-57E0F7	Roman	Nottinghamshire	xml \| csv json
Roman Coin: Struck or hammered copper alloy nummus of Emperor Constantine. Reverse type BEATA TRANQVILLITAS showing an altar, inscribed with VOTIS XX, with a globe on top and 3 stars above the globe. Minted in Lyons AD 321. Coin Reference: RIC VII, compare with number 128.
	Coin	DENO-57A586	Roman	Nottinghamshire	xml \| csv json
Roman Coin: Worn struck or hammered copper alloy nummus of the House of Valentinian. Reverse type GLORIA ROMANORVM showing Emperor with standard dragging a captive to the right. Minted AD c.364-378.
	Coin	DENO-578230	Roman	Nottinghamshire	xml \| csv json
Roman Coin: Very worn struck or hammered copper alloy coin. The coin is either a nummus or radiate coin. Dated AD. 260-402.
	Coin	DENO-461946	Roman	Nottinghamshire	xml \| csv json
Roman Coin: Very worn struck or hammered copper alloy coin. Based on the size and the presence of traces of a radiate headdress the coin is a dupondius. Although worn the head is clearly bearded with curly hair and a long neck, possibly Lucius Verus. The reverse is too worn to decipher. Based on...
	Brooch	DENO-459C54	Roman	Nottinghamshire	xml \| csv json
Worn fragment of a cast copper alloy Roman brooch. Part of the head, comprising part of the wings, axis bar and the upper part of the bow, survive. The head is flat in section and sub-triangular in plan. The remains of the circular sectioned iron axis bar are in situ encased within the head of...
	Coin	DENO-30C313	Post medieval	Nottinghamshire	xml \| csv json
Complete struck or hammered silver penny of James I (1603-1625). Rose mintmark, minted 1605-1606. The coin is pierced. The position of the piercing through the coin is located directly above the top of the thistle meaning that if suspended it is likely that the thistle was intended to be the sid...
	Brooch	DENO-3085E7	Roman	Nottinghamshire	xml \| csv json
Incomplete cast copper alloy Roman Brooch. The Brooch is a T-Shaped brooch, the wings, top of the bow and a short length of the pin survive. The wings are cylindrical and hollow. The ends of the wings are damaged and the remains of the axis bar can be seen in situ. The wings have a small open...
	Coin	DENO-3039F5	Medieval	Nottinghamshire	xml \| csv json
Medieval Coin: Complete struck or hammered silver penny of Edward I (1272-1307). Class 1c with reverse-barred N, London mint, minted 1279. Coin Reference: North (volume 2), number 1012.
	Mirror case	DENO-2F6FC6	Medieval	Derbyshire	xml \| csv json
Incomplete cast copper alloy mirror case of Medieval date. This item is one-half of a two part folding mirror case. The case is circular in plan and slightly hollowed with a lipped edge for taking the, now missing, mirror on the reverse. There are an integrally cast hinge fitting and hooked clasp...
	Buckle	DENO-2F1F47	Medieval	Derbyshire	xml \| csv json
Incomplete cast copper buckle of Medieval date. The buckle is of D-shaped single looped type with a pointed outer edge and narrowed offset strap bar. The buckle pin is missing. The outer edge of the buckle frame is triangular in shape with a central incised groove forming the pin rest. To eith...
	Key (locking)	DENO-2EA0E4	Medieval	Derbyshire	xml \| csv json
Incomplete cast copper alloy rotary key of Medieval date. The end of the shaft, including all of the bit are missing. The key handle (bow) is in the shape of a flat lozenge with a circular perforation through each corner. The two outer corners of the lozenge have small knops, the upper corner of ...
	Coin	LEIC-6250F2	Roman	Lincolnshire	xml \| csv json
Roman copper alloy nummus, house of Constantine, 330-335, reverse type: 2 soldiers with 2 standards
	Coin	LEIC-6217B1	Roman	Lincolnshire	xml \| csv json
A group of 4 Roman copper alloy nummi of the House of Constantine, reverse type two soldiers with one standard (GLORIA EXERCITVS,335-341). Measurements as follows: 1mm thick, 15mm in diameter, weighs 1.11g 1mm thick, 15mm in diameter, weighs 1.07g 1mm thick, 14.5mm in diameter, weighs 1.20g ...
	Coin	LEIC-61D0A3	Roman	Lincolnshire	xml \| csv json
Roman copper alloy nummus , Constantine II, 318-324, Wreath with VOT V CAESARVMNOSTRORVM, very worn
	Coin	LEIC-617941	Roman	Lincolnshire	xml \| csv json
Roman copper alloy nummus, House of Constantine, reverse type Constantinopolis, 330-335, Cut down
	Coin	LEIC-60E152	Roman	Lincolnshire	xml \| csv json
Roman copper alloy nummus of Magnentius, minted 350-353.Reverse type two victories holding a shield with VOT V MVLT X
	Coin	LEIC-60A4C1	Roman	Lincolnshire	xml \| csv json
Roman copper alloy nummus of Helena, reverse type PAX PVBLICA (Pax standing with a branch and transverse sceptre), 337-341.
	Coin	LEIC-605CD4	Roman	Lincolnshire	xml \| csv json
Copper alloy nummus, commemorating Constantine I (306-37), quadriga reverse, mint unclear, AD 337-40. Reece 17 For type, cf. RIC VIII, p. 142
	Vessel	DENO-05A720	Roman	Derbyshire	xml \| csv json
Four sherds from Roman earthenware pottery vessels, all fine sandy greyware, all abraded, two joining. TOTAL weight 83.06g. Two joining rim sherds, diameter of rim c.180mm, weight 25.93g. One body sherd, weight 14.67g. One base sherd, simple flat base from a jar, micaceous fabric, diameter of ...
	Strap end	LEIC-9C3B81	Medieval	Leicestershire	xml \| csv json
Medieval copper alloy strap end spacer, 22mm long, 22mm wide and 4mm thick. The object is in fair condition and weighs 3.10grams. The object is rectangular in section and crescent shaped with a spherical terminal emerging from the centre of the outer edge.
	Buckle	DENO-3A9566	Medieval	Derbyshire	xml \| csv json
Medieval cast copper alloy buckle with integral plate, 1250-1400. The loop is broken off; the plate is triangular, tapering to a point which is slightly up-turned (this may possibly have formed a hook); two copper alloy rivets, one at either end, transverse ridge behind the rivet at the loop end....
	Coin	DENO-3A8CB1	Medieval	Derbyshire	xml \| csv json
Medieval coin; silver long cross penny of Edward III, York Royal mint (no quatrefoil in the centre of the reverse), series E, 1354-1355. Battered and damaged with c. one quarter missing. Diameter: 17.5mm, thickness: 0.6mm, weight: 0.64g.
	Coin	DENO-3A7D92	Roman	Derbyshire	xml \| csv json
Roman coin; copper alloy contemporary copy of a radiate (barbarous radiate), AD275-285. Fine mid-green patina. Diameter 14.3mm, thickness 1.8mm, weight 1.22g.
	Strap end	DENO-3A7554	Early medieval	Derbyshire	xml \| csv json
Early Medieval Anglo-Saxon cast copper alloy strap end; c.9th century (possibly late 8th or early 10th century); Gabor Class A uncertain type. Split proximal end, slightly convex sides, tapering towards the zoomorphic animal head terminal. The main field of decoration is corroded and the decorati...
	Strap end	DENO-3A6B21	Medieval	Derbyshire	xml \| csv json
Medieval copper alloy composite strap-end with sheet spacer occupying the whole width. Rectangular front and back plates (edges now damaged) with projecting knop at the distal end; rectangular sheet spacer extending c. two-thirds of the way up the strap end; spacer and plates secured by a single ...
	Spindle whorl	DENO-3A5B93	Unknown	Derbyshire	xml \| csv json
Roman to post-Medieval cast lead alloy spindle whorl. Circular in plan, ow bi-conical with flattened edges in section; one side has faint relief decoration of straight and diagonal transverse lines; the other side appears to be undecorated. The hole does not taper. Thick cream patina. Diameter 28...
	Pin	DENO-3A4A54	Early medieval	Derbyshire	xml \| csv json
Early Medieval cast copper alloy ball-headed pin head, 8th-9th century. Solid sub-spherical head decorated with five spherical bosses (one at the top and four equally-spaced around the middle); wide and thick bun-spaped collar; pin shaft broken off (scar left by shaft c.3mm diameter). Mid brown-g...
	Coin	DENO-399642	Medieval	Derbyshire	xml \| csv json
Medieval coin; silver penny of Edward I, London mint, Class 9b2 (North 1036/2), 1299-1300/1. Diameter 18.9mm, thickness 0.6mm, weight 1.26g.