All finds recorded in the Parliamentary constituency of Chesterfield - Page: 1

Finds within constituency of Chesterfield

A complete list of all finds recorded
Image	Object Type	Find number	Broadperiod	County	Actions
	Arrowhead	DENO-C43F02	Neolithic	Derbyshire	xml \| csv json
Near complete Neolithic leaf-shaped flint arrowhead. Bifacially worked, with abrupt and semi-abrupt re-touching of edges, with tip broken off. Modern damage reveals an amber coloured flint but the majority of the surface is now covered with a white-grey/purple patina. Dated to the Neolithic perio...
	Unidentified object	DENO-D43192	Medieval	Derbyshire	xml \| csv json
TREASURE ITEM 2011 T285: Incomplete unidentified silver fitting of late Medieval date. The item consists of a single sheet of silver which has been rolled and pressed into a wedge-shaped cone. The seam, which is aligned edge to edge rather than overlapping, runs from the top to bottom along one...
	Token	DENO-F8C866	Medieval	Derbyshire	xml \| csv json
Medieval/post-Medieval cast lead alloy token. One side has raised moulded decoration of 15 randomly placed pellets (diameter c3.5mm); the other side is undecorated. Thick cream patina. One edge slightly bent upwards. Diameter 21.4mm, thickness 2.8mm, weight 5.38g.
	Token	DENO-F8C587	Medieval	Derbyshire	xml \| csv json
Medieval/post-Medieval cast lead alloy token. Sub-circular disc; one side has raised moulded decoration of a long cross; the other side is undecorated. Two casting sprues on the edge at c.120 degrees apart. Mid grey patina. Diameter 23.7-24.2mm, thickness 2.6mm, weight 7.21g. Possibly based on a...
	Lithic implement	DENO-F81752	Neolithic	Derbyshire	xml \| csv json
Neolithic flint blade with wear through use. Mottled grey Lincolnshire/Yorkshire Wolds type flint, no cortex. Proximal end broken off (so there is no bulb of percussion), parallel sided, rounded distal end, triangular in section. Ventral - edge wear around the distal end. Dorsal - eight flake sca...
	Coin	DENO-5540A4	Post medieval	Derbyshire	xml \| csv json
Post-Medieval coin; silver groat (probably) with Royal shield on reverse - Henry VIII to James I - 1604. Incomplete and very worn. Length (not quite diameter?) 20.3mm, width 16.4mm, weight 0.65g.
	Token	DENO-CA43B4	Medieval	Derbyshire	xml \| csv json
Medieval cast lead alloy token. Sub-circular disc; one side hasa moulded cross with a pellet in each quarter; the other side is undecorated. Cream / grey patina. Length 20.6mm, width 19.4mm, thickness 3.4mm, weight 6.15g.
	Seal	DENO-CA1FC7	Modern	Derbyshire	xml \| csv json
Modern cast lead alloy Russian bag seal, dated 180[.]. One side reads (flower)NP/WS[.]/180[.]; the other side reads MA/EMAP/7NHO/H63. Length 22.3mm, width 20.5mm, thickness 6.4mm, weight 9.78g.
	Coin	DENO-BA3DF6	Post medieval	Derbyshire	xml \| csv json
Post medieval coin; milled copper alloy farthing of Charles II, dating to 1672-1679. Obv. Laureate bust of king left [CAROLVS.A.] / CAROLO Rev. Britannia seated left with shield, holding spray and spear [BRITAN]/NI[A] Too worn to read the date in exergue on reverse. Diameter 22.7mm, thick...
	Dagger	DENO-2D3C71	Medieval	Derbyshire	xml \| csv json
Medieval cast copper alloy quillon dagger guard. Central block oval in plan (length 18.7mm, width 14.1mm) and rectangular in section (thickness 9.0mm), with trapezoidal hole (length 11.5mm, width min 3.6mm & max 5.1mm) to take the tang. Rounded arms or quillons, flat on the blade side and droopin...
	Bell	DENO-263121	Post medieval	Derbyshire	xml \| csv json
Post medieval cast spherical bell, incomplete, 16th-17th century. Sub-rectangular suspension loop with rounded corners and circular piercing (diameter c.3.3mm) towards its base. Two circular sound-holes in the upper hemisphere, linear soundhole with circular terminals in the lower hemisphere. The...
	Weight	DENO-B623C7	Medieval	Derbyshire	xml \| csv json
Cast lead shield-shaped weight, medieval c.13th-15th century. Raised central field decorated with a lion facing left (te upper part of the deign is damaged). Recessed step decorated with oblique lines giving it a corded appearence. Pierced at the top of the shield, pierced from the reverse using ...
	Coin	DENO-C8C497	Roman	Derbyshire	xml \| csv json
Roman Republican coin; silver denarius serratus of L. Papius, 79BC, Sear Vol 1 p130, no.311 (RRC 384/1 CRR 773, RSC Papia 1). Serrated edge. Worn. Diameter 18.39mm, weight 2.61g.
	Clay pipe (smoking)	DENO-668373	Post medieval	Derbyshire	xml \| csv json
Two clay pipe bowls, dating to 1640-1680 (most likely 1660-1680). Both have an oval heel which is scored with a straight line widthways. Both have a rouletted rim. Both appear to be unused. The stem is broken off one of the bowls, the other has c.25mm of stem. Bowl 1 (with stem) weight 12.45g, Bo...
	Clay pipe (smoking)	DENO-668373	Post medieval	Derbyshire	xml \| csv json
Two clay pipe bowls, dating to 1640-1680 (most likely 1660-1680). Both have an oval heel which is scored with a straight line widthways. Both have a rouletted rim. Both appear to be unused. The stem is broken off one of the bowls, the other has c.25mm of stem. Bowl 1 (with stem) weight 12.45g, Bo...
	Token	DENO-6457E6	Post medieval	Derbyshire	xml \| csv json
Seventeenth century copper alloy trader’s token of William Deane at the King's Arms, Waltham Abbey, Essex, 1668. Diameter 20.94mm, thickness 1.10mm, weight 2.08g.
	Token	DENO-641687	Medieval	Derbyshire	xml \| csv json
Lead token. Sub-circular disc, one side decorated with unclear design of radiating lines. The other side is undecorated. Diameter 26.32mm, thickness 2.96mm, weight 8.99g.
	Dagger	DENO-F5ED03	Medieval	Derbyshire	xml \| csv json
Medieval cast copper alloy dagger guard, or quillon. The central block is sub-rectangular with a sub-rectangular slot for the tang of the dagger. The projecting arms are octagonal in section, and taper then expand towards the terminals - the end of each terminal is flat, and decorated with two gr...
	Dagger	DENO-F5ED03	Medieval	Derbyshire	xml \| csv json
Medieval cast copper alloy dagger guard, or quillon. The central block is sub-rectangular with a sub-rectangular slot for the tang of the dagger. The projecting arms are octagonal in section, and taper then expand towards the terminals - the end of each terminal is flat, and decorated with two gr...
	Dagger	DENO-F5ED03	Medieval	Derbyshire	xml \| csv json
Medieval cast copper alloy dagger guard, or quillon. The central block is sub-rectangular with a sub-rectangular slot for the tang of the dagger. The projecting arms are octagonal in section, and taper then expand towards the terminals - the end of each terminal is flat, and decorated with two gr...
	Dagger	DENO-F5ED03	Medieval	Derbyshire	xml \| csv json
Medieval cast copper alloy dagger guard, or quillon. The central block is sub-rectangular with a sub-rectangular slot for the tang of the dagger. The projecting arms are octagonal in section, and taper then expand towards the terminals - the end of each terminal is flat, and decorated with two gr...
	Dagger	DENO-F5ED03	Medieval	Derbyshire	xml \| csv json
Medieval cast copper alloy dagger guard, or quillon. The central block is sub-rectangular with a sub-rectangular slot for the tang of the dagger. The projecting arms are octagonal in section, and taper then expand towards the terminals - the end of each terminal is flat, and decorated with two gr...
	Brooch	DENO-F577E0	Roman	Derbyshire	xml \| csv json
Cast copper alloy Roman dolphin type brooch with hinge mechanism. The axis bar is iron. The pin is broken off, but appears to have been iron. The brooch is quite corroded so little detail can be made out, but there may have been a transverse groove at the terminal of each wing. The bow appears ...
	Brooch	DENO-B67383	Roman	Derbyshire	xml \| csv json
Roman copper alloy dolphin brooch with hinge mechanism. The pin is missing, the short wings and the bow are undecorated, the catchplate is damaged. 1st century. Length 26.94mm, width (wings) 19.46mm, width (top of bow) 8.34mm, thickness 10.10mm, weight 6.38g.
	Token	DENO-B65171	Medieval	Derbyshire	xml \| csv json
Cast lead alloy token, with a wheel- or sun-like design. One side decorated with central pellet with ring around with lines radiating from it. Other side undecorated. Diameter 18.26mm, weight 2.54g.
	Coin	DENO-B61F22	Medieval	Derbyshire	xml \| csv json
Hammered silver penny of Edward II or III, 1307-1369, Canterbury mint. Diameter 16.88mm, weight 0.80g.
	Token	DENO-CE3277	Medieval	Derbyshire	xml \| csv json
Lead token. Circular lead disc with relief decoration of a long cross with central open lozenge on one side; the other side is undecorated. Medieval-Post Medieval. Diameter 22.18mm, thickness 3.94mm, weight 8.90g.
	Token	DENO-14F838	Medieval	Derbyshire	xml \| csv json
Lead token, folded. One side has raised decoration of a long cross with a pellet in each quarter. The other side is undecorated. Diameter 36.72mm, thickness 1.7mm, weight 13.23g.
	Token	DENO-14F838	Medieval	Derbyshire	xml \| csv json
Lead token, folded. One side has raised decoration of a long cross with a pellet in each quarter. The other side is undecorated. Diameter 36.72mm, thickness 1.7mm, weight 13.23g.
	Token	DENO-14C613	Medieval	Derbyshire	xml \| csv json
Lead token. One side has raised decoration of a long cross with another shorter cross with pellets as terminals overlaid at 45°, and two pellets in each quarter of the long cross. The other side is undecorated. Diameter 30.44mm, thickness 2.02mm, weight 9.88g.